I have a problem where l am builing RHEL 5.x servers and during the install it asks which network card you want to boot from. My servers all have 4 NICs in, broadcom. I am booting from a PXE server which runs the anaconda installer l have tried editing the kickstart files and also the pxe cfg file with various options, but have had no luck so far.
View 3 RepliesI've been fiddling with Ubuntu for the first time ever today and eventually managed to get the drivers for the network adapter installed. Now, I'm trying to get the computer running it onto my home network; I set it up to connect automatically, entered the WEP key, and hit apply, marveling at how convenient it was.
...So far it's still caused me less trouble than some of the the bizarre problems I've had trying to get a Windows computer on a network, but...it just won't connect. At all. It says it is connecting, eventually prompts me for the key again, says it is connecting again, etc, repeat on infinite loop. Except for the occasional times that it stops trying and then, oddly enough, proceeds to state that it is not connected to e of neighbor's network*, which it wasn't trying to connect to in the first place
I have an Acer Laptop and I am trying to use Linux Redhat 5 on it but for some reason the NIC is not detected by Linux. It is a bit surprising to me that the same problem was seen in my desktop computer but after changing the NIC to a different slot the Linux OS detected the NIC and it is working fine but my laptop still has the same problem.
From troubleshooting point of view:
1. Installed Linux multiple times but it didn't work.
2. Tried to add the hardware (NIC) but it didn't work.
Note: The NIC was working fine when I first installed Linux but after sometime it didn't. The laptop is dual boot (Windows & Linux) when I boot via windows the NIC works fine but not with Linux.
NIC Details:
Device Type: Network Adapter
Manufacturer: Broadcom
Location: PCI bus 2, device 0, function 0
I installed ubuntu netbook remix (the new version 10),and when I try to install drivers for my network card it says I need an internet connection,when I cant access the internet,I even tried using a wired connection (since I usually connect via wireless),but still its no use. My netbook is the following: [URL]...
View 1 Replies View RelatedMy network cards were fine under Wubi Lynx. I decided to upgrade to Ubuntu Studio Lynx on its own partition, and the DVD install routine failed to detect the network card. Where do I go from here?***1 ) Machine Brand and Model (PC/Laptop):Acer 1410 (dual amd64 netbook, about a year old)***2) Network Interfaces
>lspci
01:00.0 Ethernet controller: Atheros Communications AR8131 Gigabit Ethernet (rev c0)
02:00.0 Network controller: Intel Corporation WiFi Link 1000 Series
[code]....
I have HPDX2480 computer system where i have installed RHEL4u5 having kernal 2.6.9-55. now how can i install and configure my NIC?
View 1 Replies View RelatedI recently installed Ubuntu 9.10 on an old family laptop. It is a Compaq Presario V2000. Everything works perfectly except no wireless networks are recognized, even though I know there are available networks. My network controller is detected but is not doing it's job, which is finding available wireless networks! Using "system testing" I found this out about my network controller:
"Detecting your network controller(s):
Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)"
url
our client their is one RHEL 2.4.21-27.EL
some tine request timed out comes. how to identify the fault.
Reply from 40.50.25.60: bytes=32 time<1ms TTL=64
Reply from 40.50.25.60: bytes=32 time<1ms TTL=64
Reply from 40.50.25.60: bytes=32 time<1ms TTL=64
[code]....
My DNS server is baring 192 series IP for ex: 192.168.10.100, need to configureloadbalancer IP in that DNS server, where loadbalancer is baring 172 series IP. for ex : 172.56.67.19.is it possible to cofigure the loadbalancer ip in DNS server? if it is, please let me know the configuration details and procedure.
View 2 Replies View Relatedissue in starting up Open view monitoring on couple of linux servers and here is the output from mii-tool looks like.
eth0: 100 Mbit, full duplex, link ok
eth1: 100 Mbit, full duplex, link ok
[code].....
Based on what I understand, eth0 goes to monitoring and the other 2 ethernet cards go to FE. I am not an expert in system administration but would like to know if there is any issues with the above settings/configuration (in fact, im also looking for what do they infer and what is the settings?
actually i have generated public and private key using "ssh-keygen" command.i have appended it to the ~/.ssh/authorized_keys file in the other netowork system.still it's prompting for password.all the systems in my network are using fedora12 and fedora13.i dont know what's wrong with it.does it need to change any configuration files ..if so what are all the changes to be made?i am trying to login using the same user for whom i created the pub key..no impersonation
View 1 Replies View RelatedI want to create a small network of 3-5 computers. I want to have one computer as my server and have services like NFS, DHCP, NTP, etc. I want to connect it to 2-4 other clients that have the bare minimal installation of linux on them. I would like 1 client computer to have a static ip address and I would like another to receive a dynamic ip address from the server. How would I go about doing all of this without the assistance of GUI's? I want to be able to do all this with the ks.cfg and network config files.
View 4 Replies View RelatedWhen I run 'apt-get install <some_package>' it asks you to enter configuration information for some packages. I'd like to be able to install a list of packages automatically without having to enter any information, ie. an automated installation. I looked in the man page for apt-get, and I was looking for maybe 2 possibilities:
1) Tell it not to require input; I'll download the configuration files later
2) Enter the options in the apt-get command.
I found what _might_ be what's required for option (2), the --option, but I found the instructions for using it not understandable. It says 'The syntax is -o Foo::Bar=bar', but I don't know where to go from there, and I'm not even sure it's relevant to what I want to do. I want to install nslcd, and either sort out the configuration later (I have an ldap config file ready), or enter the ldap configuration along with the apt-get command. At present I have to enter the information interactively, which negates the possibility of an unattended install.
I have 4 machines running 10.04 32 bit Intel--- all use SSH to connect to a remote server drive (disk). All except one of the machines work just fine when accessing the remote drives. The fourth PC keeps asking for a password with every directory change.
If I select cancel three times (on the troublesome unit), the desired directory opens but then the same routine occurs with the next directory change.
I just upgraded Ubuntu 10.04 LTS. Now when I use vpnc to connect from the command line using vpnc-connect, I'm not only prompted for my password as usual, but now also being prompted for a "Passcode". Here's what the login attempt looks like:
Enter password for jegan@some.vpnhost.net:
Passcode for VPN jegan@216.23.18.33:
I've been using the same /etc/vpnc/default.conf file for years.Note that I do not have an /etc/vpnc.conf, or any of the other configuration files that vpnc checks for.Here's a modified copy of my /etc/vpnc/default.conf file:
## generated by pcf2vpnc
IPSec ID CRL-Qfe
IPSec secret XM-j-245Rv[code].............
I installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?
View 2 Replies View RelatedCannot activate network device eth0!"device eth0 does not seem to be present, delaying initialization".i cannot find my network card while i set up network configuration Now I use dual boot window 7 and fedora 9,I cannot find my network card in select network adapter while network configuration ,i have a network card Atheros AR8132 PCI-E fast Ethernet controller NDIS(620)and for wired in Accer laptop .
View 1 Replies View RelatedIts taking too much time to prompting me to enter password after boot-up and it is asking me to enter PAM_MOUNT password.
I entered the password which i use to login to my computer and it is not letting me to log-in.
I tried using safe mode and am not able to login through command line.
my wireless home network is not recognized by my network card (RealTek RTL8190 mini PCI). The post was as follows: "I am using a new computer with Windows 7 , Athlon quad core 2.60 64 bit, 8GB RAM. Internet conection works fine with ethernet but ubuntu does not see my wireless network. card (RealTek RTL 8190 ID: 10ec:8190). Have searched this forum but unable to come up with a fix. I was looking for windows XP drivers to use Ndiswrapper but could not find a list of .inf files. My network is OK and works perfectly in windows and with my 2 laptops. Can anyone point me in the right direction? Additional info: install was done within Windows using WUBI to a separate partition on my HDD. I am new to this and thouroughly confused as to the procedure for installing the drivers if they are in fact available."
I am very frustrated in that I would like to use Ubuntu 10.04 but it is useless without internet connectability. I am new to linux and do not understand where to get the appropriate drivers or how to install them. I wish someone would answer this post and either give me a clue what to do or just say "give up" and uninstall ubunutu.
When I started using Firefox It always used to prompt me if I wanted to save the session to start next time when it closed. I accidentally clicked not to ask me to do this action again. And now I want that pop-up box back and I can't find a setting to get it back
View 5 Replies View RelatedI have a Broadcom Corporation NetXtreme BCM5721 network card on my server at work.Everything works fine for a few weeks, then randomly the network connection on the server will stop working. After it stops working, I will try to reconnect with the network manager, it shows a wired connection available, it shows the "connection in progress"animation, then the "connection disabled" icon.
I uninstalled the network manager and used manual configuration, but do you think the network manager was the issue? I can't have the server disconnecting randomly every few weeks with no way to know what the real problem is. Was there an issue with the network manager with 10.04?
I have two systems connected by local network 192.168.0.1 and 192.168.0.2 both installed RHEL
I have congigured nfs and httpd and /mnt/package contains the rhel dvd contents extracted. Also the iso image of rhel from the other system (192.168.0.2), I can mount the share from 192.168.0.1. i.e NFS network is ok in 192.168.0.1
But when I tries to install rhel from 192.168.0.2 It shows the message that that directory cannot be mounted. selinux is permissive in 192.168.0.1. The problem when it asks for network ipno.Is it required to run dhcp server on 192.168.0.1? I have tried another way also - by http created a link to /mnt/package in /var/www/html
But when I tries to install through http://192.168.0.1/package ( from http://192.168.0.1 also - experimented all combinations) - it automatically switches to CD install.
is possible to edited the default RHEL CD to have it automatically install RHEL based off of a kickstart file that I will store locally on the CD. My plan would be to put a cd in a server and have the OS automatically being installed.
View 3 Replies View RelatedI have RHEL 3 and Win XP Installed in my P.C?I want to uninstall RHEL 3 and install RHEL 9 without affecting XP.how can i do this and also where can i download free RHEL 9 version or any other latest linux distribution for free?
View 1 Replies View RelatedI tried installing nf_conntrack module in RHEL , it fails
[root@boot]# modprobe nf_conntrack_ipv6
FATAL: Module nf_conntrack_ipv6 not found.
[root@boot]# modprobe nf_conntrack
FATAL: Module nf_conntrack not found.
[root@boot]# lsmod | grep -i nf
nfnetlink_queue 16129 2
nfnetlink 10713 4 nfnetlink_queue,ip_conntrack
[Code]....
I have RHEL 4, RHEL 3, i need install dmidecode RPM packet and procinfo packet... exist this packets for this linux versions?
View 11 Replies View RelatedI just want know, how two network card in one PC working on fedora. I want try setup router + firewall on my PC. And i need tutorial how is working
View 1 Replies View RelatedI added to my machine PC running debian and others, ubuntu, pc wireless card:,the same card I used it on other machine, it ran nice.On the other machine i have Ethernet Controller instead of Class ffff.I installed the divers firmware-ralink and other realtek and network-manager, but nothing.on other machine, that was enough to run it correctly.and ifconfig dosn't give wlan0,iwconfig did't give characteristic of wlan0.does this mean that the bios didn't recognize it as a network card
View 3 Replies View RelatedI seccessfully install RHEL 05. But it do not show lan and not connect to other computer. My LAN adapter is realtek rtl8169 gigabit ethernet adapter.Please tell me how can download its driver and how can install.
View 3 Replies View Relatedgot a new MoBo today. dropped it in and powered it up to find no network connection. when I dig though network manager I find no network devices, same with "network configuration" lspci gives:
03:00.0 Ethernet contoller [0200]: Atheros Communication Device [1969:1083] (rev c0)
ifconfig gives just the "lo" device. is there a hardware detection step I'm missing? I should mention this is a swap of one onboard NIC for another.