Networking :: Install And Configure Realtek 8111c Network Card On RHEL4 U5
Dec 31, 2009I have HPDX2480 computer system where i have installed RHEL4u5 having kernal 2.6.9-55. now how can i install and configure my NIC?
View 1 Replies
ADVERTISEMENT
Debian Hardware :: 6.0 RC1 And Realtek 8111C Network Card
Jan 22, 2011I'm new to Debian, and new to Linux at all (well, I have used Linux sometimes in the past; Red Hat 7.1, Knoppix 3.6, Ubuntu, and some other distros but by no meaning I could call myself a real, full-time Linux user). But that's what I want to change. After some research I've decided on Debian. At first I wanted to download a stable build (5.0.7) but I've seen 6.0 RC1 was released just recently and I've changed my decision to get this version instead. Anyway, I'm currently downloading the DVD (slow connection, 2Mb/s only) and I've spotted this page in the meantime.
Thing that got my attention is "Potential installation problems with RTL8169-based network cards". I've checked my motherboard (Gigabyte GA-EP45-DS3) and I have Realtek 8111C on it. As far as I understand, it's not RTL8169-based but any real problems with my Realtek 8111C card, I don't want to install an OS from which I couldn't browse web. I know I had big issues with it while installing Mac OS X Snow Leopard but that's what I could expect when installing OS on unsupported hardware. So any way to install Debian 6.0 RC1 on a computer with Realtek 8111C network card?
OpenSUSE Hardware :: Realtek NIC Installation - Unable To Configure The Network Card Because Kernel Device (eth0, Wlan0) Is Not Present
Nov 30, 2010Installed a TP-Link TG-3269 Gigabit card in a machine running OS 11.3 32 bit, when I go into Yast, Network Devices, Network to try configuring the card I get this errormsg: Unable to configure the network card because the kernel device (eth0, wlan0) is not present. This is mostly caused by missing firmware (for wlan devices). See dmesg output for details. Couldn't find any mention of the card in dmesg's output, (though the 8139 onboard card is in there) there is some stuff about pci host bridge but I don't know whether they would be relevant or not
The chip on the card says it's rtl8169sc but lspci lists it as being 00:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Device 8369 (rev 10) Done some googling and there don't seem be any drivers for a Realtek 8639 and it returns no matches from a search on realtek's site, but there is a driver there for rtl8169sc chips, which I downloaded and installed, no errors when installing it Even after a reboot I still get the same error in Yast's Network Settings screen, lspci still lists it as 8369 and the device isn't listed at all if I run ifconfig
Ubuntu Networking :: Wireless Home Network Is Not Recognized By Network Card (RealTek RTL8190 Mini PCI)
Jul 12, 2010my wireless home network is not recognized by my network card (RealTek RTL8190 mini PCI). The post was as follows: "I am using a new computer with Windows 7 , Athlon quad core 2.60 64 bit, 8GB RAM. Internet conection works fine with ethernet but ubuntu does not see my wireless network. card (RealTek RTL 8190 ID: 10ec:8190). Have searched this forum but unable to come up with a fix. I was looking for windows XP drivers to use Ndiswrapper but could not find a list of .inf files. My network is OK and works perfectly in windows and with my 2 laptops. Can anyone point me in the right direction? Additional info: install was done within Windows using WUBI to a separate partition on my HDD. I am new to this and thouroughly confused as to the procedure for installing the drivers if they are in fact available."
I am very frustrated in that I would like to use Ubuntu 10.04 but it is useless without internet connectability. I am new to linux and do not understand where to get the appropriate drivers or how to install them. I wish someone would answer this post and either give me a clue what to do or just say "give up" and uninstall ubunutu.
Ubuntu Networking :: Wireless Realtek 8185 Card - Can't Make An Ad-hoc Network?
Jan 11, 2010The card is recognized by Ubuntu 9.10 and I have it in the network manager. I followed one tutorial about creating an ad-hoc network and all looked good, until I actually wanted to connect (or to be more precise, my machine is a host for other computers). The wireless icon just loops endlessly, without connecting and eventually I get "Wireless network - disconnected" message.
So, the main issue here is - connecting! I just can't. Also if you know/have some good tutorial for ad-hoc,
Code:
ivan@ivan-desktop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"internat3"
[Code]...
Networking :: Ethernet Card Realtek 8139 Driver Does Not Install?
Dec 12, 2008There seems to be some trouble with 8139too not working in a previous post. Has anyone found a solution to this? ubuntu version 2.6.24 (Hardy Heron?). Followed all known possibilities but information is all mostly out of date. module 8139too.ok? does not load. Following makefile on 8139too.c supplied, after altering to suit my version, comes up with 3 pages of errors?. ifconfig shows nothing for eth0like the last person markjuggles i have hit a brick wall here. Am I wasting my time?
View 10 Replies View RelatedNetworking :: How To Configure DNS Server & DNS Client In RHEL4?
Jul 5, 2009How I am configure DNS Client and server in Redhat Linux 4 in my lab.I have total 5 computers and they are Lan connected.I want to make one of them server and the others are client.
View 1 Replies View RelatedNetworking :: Cannot Configure My Network Card / Make It Possible?
Aug 20, 2010I am using Redhat enterprize linux and using ethernet card Realtek PCIe FE Family Controller. I tried to configure my network card. But unable to activate it as message appears "No such device found" I am using Dell inspiron laptop.
View 5 Replies View RelatedUbuntu Networking :: Configure My Network Card Using The B43 Driver
Jun 24, 2011I'm trying to configure my network card using the b43 driver. I'm running 10.04.2 on the kernel version 2.6.35-25-generic-pae.
Surprisingly, I was able to connect to my home wireless network using the b43 driver without a problem. The only issue is that it doesn't automatically connect. I have to use the following command in order to get it to work:
Code:
After typing my password, I wait for 10 seconds and am automatically connected. My question is, how do I configure my system to do this for me permanently (or at least automatically) so I don't have to type it every time I log on?
OpenSUSE Install :: 10.3 Network - Configure Ethernet Connection Or Wireless Card
Oct 2, 2010I installed 10.3 (after buying it a couple of years ago and letting sit on the shelf) and can't get it to configure my ethernet connection or my wireless card. Yast doesn't include a list of available cards, and the error I get in installation-network setup is that the kernel isn't present. The machine I'm installing this on is a Lenovo, in which there isn't a discrete ethernet card (it's in the motherboard), but my wireless card (a Cisco LINKSYS 802.11G) is a discrete card. Because I'm divorcing Microsoft for a number of valid reasons, I don't have Windows available on that box.
View 4 Replies View RelatedNetworking :: Unable To Configure The Network Card Because The Kernel Device Is Not Present
Jan 28, 2010I have installed Linux SuSE 10.3 on a PC (Lenovo Thinkstation A58). However, when I start the computer I get the following error message:
"No valid Host_ID or host-name found."
I then use YaST to set up the network. I get the following error message:
"Unable to configure the network card because the kernel device is not present."
The computer has Windows 7 installed and everything seems to work fine. The LED on the Ethernetplug is blinking when using Windows, but not when using Linux. I guess this means that there is no driver for the Ethernet card (Marvell Yukon 88E8057). I have not found any driver for the card and am considering buying a new one. Which PCI card works with SuSE Linux 10.3?
OpenSUSE Wireless :: 11.3 - Installing Realtek RTL8101 Network Card
Aug 27, 2010I am having trouble getting a Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller to work on openSuSE 11.3. Most of the data for the problem is in this pastebin of the output of Framp's collectNWData.sh. I have also downloaded drivers for this card as detailed below.
Code:
stephen@linux-75on:~> zypper se -r drivers:nic -i
Loading repository data...
Reading installed packages...
Also, here is the more complete output of /usr/sbin/iwlist scan:
Code:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
pan0 Interface doesn't support scanning.
CentOS 5 Hardware :: Realtek 8169SC Network Card Not Working
May 28, 2010I am not very experienced using Linux but I never had big problems with Ubuntu. Now I am busy writing my PhD thesis and therefore I had to install CentOS to use one lousy program that I could not get to work under Ubuntu. However, it seems to be quite fine and it is working well besides one fact: The network card stopped working. In the beginning it was working fine although the speed was only on the level of 100mbit. The switch and the LED on the card indicated gbit connection, though. I tried to install the driver for the 8168 card which reduced the card to 100mbit (indicated by the LED on the switch and the card).
Ethtool indicated it was gbit capable but I couldn't activate it. After reading more and more I figured I have to use the 8169 driver again and live with the 100mbit. Unfortunately, after uninstalling the old driver and reinstalling the driver 8169 the network isn't working at all anymore. The network-manager displays the card as inactive and when I try to turn it on it complains about the wrong mac address, which I am not able to change to the proper one. I am using CentOS 5.5 with the latest updates.
Ubuntu Networking :: How To Turn Off A Realtek Wifi Card
Feb 16, 2010I have downloaded the driver installed it, and it works fine. But i can't get to turn it off. I do have the ability to unload the driver's kernel modules and the sysyem does not see my card after that. That's ok, but i'm thinking it still uses my battery power. The wifi led is always on no matter what i do. The fn+<wifi key> doesn't to anything.
View 8 Replies View RelatedUbuntu Networking :: No Internet On 9.04 With Realtek RTL8139 Card
May 21, 2010I have installed 9.04 ( I currently have it on dual boot with Windows XP) and my problem is that I have no internet connection. I have a Motorola modem with a Realtek RTL8139 Family Fast Ethernet NIC network card ( it's a wired connection, btw) When I plug in the cable, there's a little animation, but after a while I get the message: Wired connection is not active (or something like that) Here's what I did so far:
1) I ticked the Wake-On-Lan option in XP, since I read it in the forums that I could solve my problem. It did not
2) I turned off my modem, rebooted my system.
3) I deleted the Auto Ethernet network, and plugged in the cable again...no use.
4) I did an ifconfig, since I know that is what you guys really want
evajulia@Derek:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:18:f3:ab:2b:3a
inet6 addr: fe80::218:f3ff:feab:2b3a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
Networking :: Realtek Rtl8185 Wireless Card Will Not Connect
Dec 26, 2010Running Linux mint 10 After the installation the wireless connection worked but it was very weak and intermittent. The icon would show 1 bar or none. iwconfig showed the rate at 1Mb/s. The same card worked fine in windows and on a 32bit version of linux. Installed new driver from realtek. Now the iwconfig readings look good and the icons shows 2 and sometimes 3 bars. But it will not connect at all! I even turned off all security on my router but it would not connect.
View 14 Replies View RelatedNetworking :: Rpm For Realtek 8169 Ethernet Card Is Not Installing
May 23, 2010I am using DELL VOSTRO 1510 laptop , it has realtek r8169 ethernet card, i installed RHEL 5 in my laptop , i checked for the driver cd provided by DELL, they given one source rpm and two other rpm for ethernet card, i tried to install them through "rpm -ivh (path)/realtek-r8169 (full name).rpm " but it asking about dependency . i tried it by using yum also but still its not working.
also i tried to create binary rpm through source rpm, but it only generating spec not binary rpm, when i am using " rpmbuilt -ba (spec file) " its showing command not found error. RHEL5 have ethernet driver for realtek-8129 in their list but not for realtek-8169, i checked it in system-config-network window, now what to do, how do i install this rpm , i want to access net through RHEL 5.
CentOS 5 Networking :: Looking For Realtek 8112L Card Setup?
Aug 23, 2010I've done some research for CentOS and Linux support in general for this card, and I haven't found the answer I'm looking for. Does anyone use this card in a system of theirs, and, if so, how easy was it to set up? It's on an Asus M4A785T-M/CSM motherboard that I'm looking to purchase (Newegg link here for reference). I've seen a lot of Realtek cards have zero problems in Linux before, but I know each chipset is different.
View 4 Replies View RelatedUbuntu Networking :: Realtek 8139 Wired Card Not Working?
Feb 23, 2010I have no internet connection. I am running dual boot windows XP and ubuntu. The card works fine in windows, but doesn't work at all in Ubuntu. This is the card I am using Realtek rtl8139/810x Family Fast Ethernet Nic. I am using Ubuntu 8.10, codename intrepid. I hate windows because of the viruses I contract everyday, so I decided to use Ubuntu, but this does no good without networking. so I can get online. What I do now? It is an onboard LAN card, cable is plugged in a green light is on, ubuntu just doesn't recognize it.
View 2 Replies View RelatedUbuntu Networking :: Realtek Wireless Card Doesn't Work
Sep 12, 2010I have a Toshiba Satellite series laptop, i get ubuntu on it, all works well but there's a problem, my wireless card doesn't work, it doesn't show me the aviable wireless network, my Wireless Card is an Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) but it works in windows. I used Ubuntu 8.04.4 LTS. When i run these codes that's what it shows:
[Code]....
Ubuntu Networking :: EDUP 802.11n Wireless Card (RTL8188SU) Realtek?
Oct 12, 2010I am trying to install EDUP 802.11n Wireless USB Install (RTL8188SU) on my recently installed ubuntu platform and I need a driver for it. I downloaded the one from the Realtec website and I got a bunch of files that I have no idea what to do with them. (h[URL]... I am compleatly new at Linux and I have no idea how to install anything. I am pretty nifty with Windows but this is my first time trying Ubuntu and Linux. So can I have some step by step guide to install this. I am good at following clear instructions correctly.
Aditional Info: I tired the hardware thing already or whatever its called and only NVIDIA drivers are there and my USB is not recornized because it needs a driver.
Ubuntu Servers :: Airport Card On A Wireless Network - Couldn't Auto-configure My DHCP Network
Aug 13, 2011I've installed the Ubuntu 10.04 Server onto a PPC G4 Mac just for the experience of setting up a server. During the installation process Ubuntu couldn't auto-configure my DHCP Network. I'm using the airport card on a wireless network. How can I manually configure the network once Ubuntu is installed.
View 6 Replies View RelatedUbuntu Networking :: Wireless Card Not Picking Up Signal (Realtek RTL8187)?
Feb 12, 2010this isnt happening on ubuntu but I think this is more or less a kernel problem that could happen with any flavor. After a new install off of a live cd my wireless card is not picking up any signals...i was able to use wireless while using the live cd but now after it has been isntalled to the hard drive it is not working. even tried in terminal to manually look (iwlist wlan0 scan) but it isnt picking up the signal
View 2 Replies View RelatedCentOS 5 Networking :: The OS Locks Up When Attempting To Activate A Wireless Realtek Card (pci)
Sep 8, 2009I just recently installed CentOS 5.3 and to make a long story short I found the entry for my wireless card under the network settings but when attempting to activate the card the system locks up. I have to reboot at that point as nothing responds (keyboard, mouse, etc..).
Running the command /sbin/lspci -v reveals the following about the wireless card:
01:00.0 Ethernet controller: Realtek Smeiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
Networking :: Install Wireless Lan Driver In RHEL4 ?
Dec 19, 2010I want to install the wireless lan driver in rhel4. I searched for the driver in internet, i got only Realtek rtl8185_linux_26.1031.1207.2009.release.tar.gz, how to install it in RHEL4.
View 1 Replies View RelatedUbuntu Networking :: Wireless Internet Drops Frequently With Realtek Card On Kubuntu 10.04?
Feb 11, 2011I'm using Kubuntu 10.04.2 LTS on a Bangho laptop. Kernel 2.6.32-28-generic i686. My card is: Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter iwconfig wlan0 gives me:
Code:
wlan0 IEEE 802.11bg ESSID:"Default_WLAN"
Mode:Managed Frequency:2.442 GHz Access Point: 00:06:4F:8D:B9:AF
Bit Rate=1 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr: off Fragment thr: off
[Code]...
Usually when this happens, for 10 or 20 seconds it appears to be connected (i.e. the heart symbol is there) but I can't ping google or my router, then it "realizes" it's disconnected. It takes one or two attempts to reconnect successfully by pressing the "active" button. Meanwhile throughout the disconnections and re-connections the signal is very strong (98%).
I had the same problem with my old access point, at first I thought it was the cheap/old hardware, so now I bought an "ENCORE ENDSL-A2+WIGX2 | ADSL 2+ Modem with 4 Port Wireless Router". The problem persists only with a stronger signal.
Server :: Configure Sftp In RHEL3 Or RHEL4?
Jul 16, 2010How to configure sftp in RHEL3 or RHEL4
View 3 Replies View RelatedOpenSUSE Network :: Wireless Card Realtek 8187 Connectivity - (Firefox) "the Server Can't Be Found"
Dec 3, 2009I have a Toshiba Satellite L305-SP6944C, Pentium Dual Core 2.16, 2GB RAM, 160GB hard drive, DVD-RAM UJ880AS, display 15.6 TFT widescreen, ethernet Realtek RTL8101E/RTL8102E PCI Express, WLAN Realtek RLT8187, Opensuse 11.2 and KDE 4.3.1. Installation was OK and finally the wireless card is working... but I don't have conectivity bacause in the browser (Firefox) appears a message saying "the server can't be found"
I follow the howto write by Swerdna. With ndiswrapper I install the XP driver for RLT8187, KnetworkManager is in charge of connections showing both eth0 and wlan0, the wireless sign of router Dlink DIR-280 is OK, in the dialog box of network connection I put the mac address of the wlan card but I think that is not the problem.
Other thing that I missed is that I don't find boot.ini at any directory to add modprobe ndiswrapper in the boot sequence, in etc/init.d/ appears a "boot" file, is this file that I have to change to modprobe ndiswrapper??
Ubuntu Networking :: Install Drivers For Network Card?
Jul 4, 2010I installed ubuntu netbook remix (the new version 10),and when I try to install drivers for my network card it says I need an internet connection,when I cant access the internet,I even tried using a wired connection (since I usually connect via wireless),but still its no use. My netbook is the following: [URL]...
View 1 Replies View RelatedNetworking :: RHEL 5.x - Prompting For Network Card During Install?
Mar 12, 2010I have a problem where l am builing RHEL 5.x servers and during the install it asks which network card you want to boot from. My servers all have 4 NICs in, broadcom. I am booting from a PXE server which runs the anaconda installer l have tried editing the kickstart files and also the pxe cfg file with various options, but have had no luck so far.
View 3 Replies View Related
