Fedora Networking :: Two Network Card In One PC?

May 14, 2010

I just want know, how two network card in one PC working on fedora. I want try setup router + firewall on my PC. And i need tutorial how is working

View 1 Replies


ADVERTISEMENT

Fedora Networking :: Cannot Find Network Card While Setup Network Configuration?

May 25, 2010

Cannot activate network device eth0!"device eth0 does not seem to be present, delaying initialization".i cannot find my network card while i set up network configuration Now I use dual boot window 7 and fedora 9,I cannot find my network card in select network adapter while network configuration ,i have a network card Atheros AR8132 PCI-E fast Ethernet controller NDIS(620)and for wired in Accer laptop .

View 1 Replies View Related

Fedora Networking :: Can't Find The New Network Card

Apr 9, 2011

got a new MoBo today. dropped it in and powered it up to find no network connection. when I dig though network manager I find no network devices, same with "network configuration" lspci gives:

03:00.0 Ethernet contoller [0200]: Atheros Communication Device [1969:1083] (rev c0)

ifconfig gives just the "lo" device. is there a hardware detection step I'm missing? I should mention this is a swap of one onboard NIC for another.

View 6 Replies View Related

Fedora Networking :: F10 And Trendnet Wireless Network Card

Sep 8, 2010

I know that most people are using F12 and F13 but I just installed F10 on one of my machines. The Kernel is 2.6.27.5-117.fc10.i686 and the GUI is Gnome 2.24.1.I have a Trendnet wireless card already installed in the machine from when it ran XP which is in the tew-421pc/tew-423pi family. Is there a device manager/hardware installer that I can use to set up the wireless card or does anyone know of a driver install program for this card?

View 1 Replies View Related

Fedora Networking :: Wireless PC Card Not Connected To Any Network - Driver

Dec 22, 2009

I have a Netgear WG511GE PCMCIA card, and a driver from the original installation disk. I used an ndiswrapper-utils gui called ndisgtk to install the driver. I then do the following to verify an installation:

[Code]....

Unfortunately, when I put the PCMCIA card in, nothing happens. On Windows, a green light flashes even if the card is not connected to any network. At first I thought this might be a hardware issue, so I did #lspci and got:

[Code]....

Lo and behold, when I put a different unbranded Wireless PC Card in it works. I'm no expert in Networks, but to me this suggests a driver problem (i.e. the card is physically detected it just won't work). However, the correct driver was installed with ndisgtk and this was verified with #ndiswrapper -l, hence the confusion.

I'd be grateful if anyone else has had this problem/knows of this problem and is willing to share the solution with me/point me in the right direction. So far, Google has returned a few posts from a few years ago talking about patching kernels and manually building files etc (just before Prism54 became integrated into the Linux kernel).

View 8 Replies View Related

Fedora Networking :: Wireless Network Card Being Detected But Not Being Allowed To Activate?

Mar 7, 2009

I have downloaded and installed Fedora 10.Now I am setting up the network and in the 'network configuration' it finds the wireless device (ralink) in the 'hardware' section of the configuration - I set this to eth0 (it originally set itself to wan0 and I still had the same problems, now it doesn't give me the option to put it back to wan0).Now I goto the devices tab and try to set up the device with eth0 - which it seems to find.But when I goto activate the device it tells me that eth0 cannot be found

View 2 Replies View Related

Fedora Networking :: Network Manager Doesn't Detect WiFi Card?

Dec 22, 2009

I just installed x64 Fedora, and as the title says, NM fails to detect my WiFi card. It's an Encore ENLWI-N with a RaLink RT2800 chipset. The card does show up when I run lspci, although iwconfig yields nothing.Not sure if this helps, but when Ias running Karmic Koala, Ubuntu detected the card immediately and required no configuration

View 2 Replies View Related

Fedora Networking :: Test Network Card Through Output And Speed Between Linux And Windows?

Jan 20, 2011

I need to test network card throughput and speed between two computers, one is running Fedora and other running Windows 7. Usually I would use netperf to perform this task, however I can't find Windows build of netperf. Can anyone recommend any network evaluation tool, similar to netperf (clien/server) which has both Windows and Linux versions.

View 2 Replies View Related

General :: Networking - Network Card - Connected To Network - Given Access Point - No Connection?

Apr 3, 2010

I installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?

View 2 Replies View Related

Ubuntu Networking :: Wireless Home Network Is Not Recognized By Network Card (RealTek RTL8190 Mini PCI)

Jul 12, 2010

my wireless home network is not recognized by my network card (RealTek RTL8190 mini PCI). The post was as follows: "I am using a new computer with Windows 7 , Athlon quad core 2.60 64 bit, 8GB RAM. Internet conection works fine with ethernet but ubuntu does not see my wireless network. card (RealTek RTL 8190 ID: 10ec:8190). Have searched this forum but unable to come up with a fix. I was looking for windows XP drivers to use Ndiswrapper but could not find a list of .inf files. My network is OK and works perfectly in windows and with my 2 laptops. Can anyone point me in the right direction? Additional info: install was done within Windows using WUBI to a separate partition on my HDD. I am new to this and thouroughly confused as to the procedure for installing the drivers if they are in fact available."

I am very frustrated in that I would like to use Ubuntu 10.04 but it is useless without internet connectability. I am new to linux and do not understand where to get the appropriate drivers or how to install them. I wish someone would answer this post and either give me a clue what to do or just say "give up" and uninstall ubunutu.

View 2 Replies View Related

Ubuntu Networking :: Broadcom Corporation NetXtreme BCM5721 Network Card Randomly The Network Connection On The Server Will Stop Working?

Jan 29, 2011

I have a Broadcom Corporation NetXtreme BCM5721 network card on my server at work.Everything works fine for a few weeks, then randomly the network connection on the server will stop working. After it stops working, I will try to reconnect with the network manager, it shows a wired connection available, it shows the "connection in progress"animation, then the "connection disabled" icon.

I uninstalled the network manager and used manual configuration, but do you think the network manager was the issue? I can't have the server disconnecting randomly every few weeks with no way to know what the real problem is. Was there an issue with the network manager with 10.04?

View 4 Replies View Related

Fedora Security :: Switch Off The Network Interface But Light Of Network Card Plugged In The Router Stays On (green)

Dec 26, 2010

I have a laptop connected to the the net thru an adsl modem, when I switch off the laptop network interface,(thru system-config-network) the light of the laptop network card plugged in the router stays on ( green) where as in my pc, when i do the same thing , the light of my pc network card goes off in the modem

View 5 Replies View Related

Fedora Networking :: 14 Can't Connect To SpeedTouch 585 - Either Wireless Broadcom Card Or The Wired Ethernet Card

Dec 4, 2010

Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.

I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.

Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.

Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.

View 6 Replies View Related

Networking :: PCI Network Card Not Detected As It

Aug 27, 2010

I added to my machine PC running debian and others, ubuntu, pc wireless card:,the same card I used it on other machine, it ran nice.On the other machine i have Ethernet Controller instead of Class ffff.I installed the divers firmware-ralink and other realtek and network-manager, but nothing.on other machine, that was enough to run it correctly.and ifconfig dosn't give wlan0,iwconfig did't give characteristic of wlan0.does this mean that the bios didn't recognize it as a network card

View 3 Replies View Related

Ubuntu Networking :: Network Card Not Detected?

Apr 4, 2010

I have bought a new laptop with W7 installed. And I installed dual boot with Ubuntu 9.10 on it.I tried to connect my laptop to Internet by Ethernet port. It works with W7, but Ubuntu doesn't detect my Network card .After some research on Internet, I suppose that it's a problem of drivers for this card.Here some parameters I could get :

>ifconfig :
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0

[code]...

View 4 Replies View Related

Ubuntu Networking :: Adding New Network Card

Apr 17, 2010

I've switched to a new motherboard, an Asus P6T SE one, and now I don't have any cable connections in Networkmanager anymore.

I see the new card when I run "ifconfig", it's called "eth2", but I have no idea where to go from here without messing up networkmanager.

View 1 Replies View Related

Ubuntu Networking :: Network Card Not Detected

Jun 16, 2010

I'm in serious need of some help. The network adapter on the motherboard of my main machine apparently failed about noon today. This machine serves as the firewall and router for my home office LAN, and so it has two network adapters, the second being a PCI card installed in the only PCI slot of the mobo. The mobo's adapter served the WAN while the PCI card serves the LAN.Since the mobo has only one PCI slot, none of the other PCI cards I have on hand could be used. Instead, I pulled an unused PCI-e dialup modem card from the machine, and bought a PCI express gigabit card to put in its place.

The problem is that the machine (running Hardy 8.04.4 LTS) does not recognize the new card at all. Running lspci shows only the old PCI card that serves the LAN. Similarly, running "sudo lshw" shows only the old PCI card together with a virtual adapter that's part of my VirtualBox installation on that system.I then dual-booted into Vista Home and attempted to install the new card there, using the CD that came with it. Vista detected the card and asked for the disk, but then was unable to find any drivers on the disk!The box says the card is from Star Tech, and the instruction sheet says its model is ST1000SPEX.If anyone can point me to the correct module to add to the startup list and/or remove from the blacklist, that may get me going again.

View 3 Replies View Related

Ubuntu Networking :: Set Up Dual Lan Card Within Same Network?

Jun 18, 2010

how to set up dual lan card using different ip addresses within the same network? for instance, i want eth0 to be 192.168.0.100 and eth1 to be 192.168.0.200 so that the bandwidth of each card could not be saturated easily. both lan card will be using the same gateway and dns which is 192.168.0.1. the eth0 could be used for mysql connection, while the eth1 could be used for samba connection for the entire network of 192.168.0.0/24.

is this possible?? i've tried but to my bad luck, it didn't work quite well, especially the connection to the internet.

View 2 Replies View Related

Ubuntu Networking :: Can't Seem To Get Network Card Up And Running

Jan 22, 2011

Hi, So brand new to Ubuntu and linux for that matter. Can't seem to get my network card up and running I have tried the various fixes through the forums, as you can see in the screenshots. Just hoping an expert could help me out so I can finally close the box and get sleep. I have a ASUS M4A78T-E with phenom II. I downloaded ndiswrapper (1.9) and have wicd. The card is trendnet 643PI but it shows up as RealTek 8190.

View 9 Replies View Related

Ubuntu Networking :: Network Card Not Working / Get That?

Apr 21, 2011

I have BroadCom BCM4318 802.11B/G Wireless Card. When I first started Ubuntu a week ago it didn't work, but I fixed it after a day or two of googling it. However I made a mistake and uninstalled the Network Manager. I then reinstalled Ubuntu, but it wouldn't load the card again. I activated the driver, and restarted the computer, but then, since It was connected via Ethernet, it wouldn't reconize the Ethernet connection, but the wireless card it did, but wouldn't find a network that is supported.

View 6 Replies View Related

Networking :: Add Route To 1 IP Address Through Second Network Card

Sep 8, 2010

I have a server with 2 network cards. eth0 is used for all traffic and everything is working fine on this side. Eth1 is used for traffic to and from 1 ip address.

Lets say the ip address of eth1 is 123.123.123.10 and its gateway is 123.123.123.1. I need to pass all traffic to 123.123.123.20 through eth1. What command would i use?

View 1 Replies View Related

Networking :: Cannot Configure My Network Card / Make It Possible?

Aug 20, 2010

I am using Redhat enterprize linux and using ethernet card Realtek PCIe FE Family Controller. I tried to configure my network card. But unable to activate it as message appears "No such device found" I am using Dell inspiron laptop.

View 5 Replies View Related

Networking :: How To Define Gateway On Network Card

Jul 13, 2009

I have two network card in my computer.
1. eth0 is set to automatic obtain IP from provider (DHCP)
2. wifi0 is set to static IP (local) 192.168.1.1

My ifcfg-wifi0 is configure in /etc/sysconfig/network-scripts/ifcfg-wifi0 as below
# Atheros Communications, Inc. AR5212 802.11abg NIC
DEVICE=wifi0
ONBOOT=yes
BOOTPROTO=static
IPADDR=192.168.1.1
NETMASK=255.255.255.0
HWADDR=00:17:9A:75:48:37

my /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=pc1.homeserver.in

eth0 IP is connected to broadBand internet service provider device WiMax and IP change time to time from internet service provider. How can I get IP for gateway in /etc/sysconfig/network. I am using Redhat enterprise Linux 4.

View 5 Replies View Related

Networking :: Packet Loss On 2nd Network Card

Jan 23, 2010

I try to setup a locale network between 10 (Web) Servers (openSuse 11.2), each Server is connected to the internet (eth0) which works fine on all servers.

A 2nd NIC eth1 (1GBit rtl-8169) on each Server is connect to a Switch and should function as a LAN. I installed/configured the 2nd NIC with yast, and than added a route for the local network (192.168.20.0) to use eth1. So far every thing works (ssh for example), but I have a packet loss of 10%-60% (ping) on the local network, and I cant find the reason for the packet loss. I already installed a Debian Lenny on 2 Servers (just to test) but I have the same problem on Debian.

No firewall or any other application is in the way. With tcpdump I could figure out that the packages are send but never show up on the destination server.

I put some more information about how I configured the LAN below. I have not done this my first time and from my experience if something is wrong with the network configuration (wrong routing, firewall in the way, etc.) this usually leads to a packet loss of 100% or the destination is simply not reachable.

The 2nd NIC is installed with either yast on suse , or by editing /etc/network/interfaces on debian. The Kernel module rtl8169 is loaded.

They are configured with the following values:

Route is added by:

Output example. of ifconfig :

Output of route (same on all servers):

Output of ping:

View 14 Replies View Related

CentOS 5 Networking :: Files That A Network Card Needs To Use?

Feb 13, 2009

Can anyone please tell me the files that a network card needs to use - know it needs a file called ifcfg-eth0 in etc/sysconfig/network-scripts

What other files has information relating to eth0

View 1 Replies View Related

Ubuntu Networking :: Wireless Network Card For Router?

Jan 14, 2010

I am running ubuntu server x64 as a router. I currently have 2 LAN cards, eth0 and eth1. and I want to add wireless capabilites to the machine.I was wondering if any of you know which card I could use?I want it to be supported in ubuntu server and it must be n-draft, as it is to replace a Edimax n-draft router.

View 1 Replies View Related

Ubuntu Networking :: Need Static Ip On Wireless Network Card

Mar 15, 2010

I want my Ubuntu desktop to have a static ip-address, i have altered the interfaces file to the below and also filled the info regarding my wireless network card but still every time I reboot the desktop gets the ip 10.42.43.1, HOW is that possible???

I use a apple time capsule router, I want my desktop to run a apache server thats why I need the static ip. I also want the static ip to be set on the wireless network interface. I have an old laptop with an internal Intel pro 2200 card so there should not be a driver problem.

This i my interfaces config code...

To be on the sure side to get this to work I have configured my router(DHCP) to give my wireless-HWaddress the ip of 10.0.1.15, STILL the ubuntu desktop starts with the false address above.

View 4 Replies View Related

Ubuntu Networking :: Network Card Not Connecting After Hibernate?

May 15, 2010

Recently I hibernated my computer, then when starting up again managed to boot into Windows instead. When I rebooted back into Ubuntu 10.04 my network card had stopped connecting to the internet.'s not a problem with my connection -- I'm posting this form Windows just fine. Using the network tools tool I can see that the card is inactive.I can use ifconfog to reactivate it, but it still won't connect.Attached is as many commands as I could find that provide information about the card

View 2 Replies View Related

Ubuntu Networking :: Intel Network Card Up/Down On Current 10.04?

May 18, 2010

I am running Lucid Lynx and have only noticed this problem in the past couple weeks. Before Lucid I ran Jaunty & Karmic on this same box, although I installed Lucid as a clean install. My problem is that up to 5 or 6 times per minute my networking card drops its connection and then has its connection re-established. I have an integrated Intel 82566DC gigabit card on an Intel Motherboard DG35EC connected to a 10/100 network and am running the 64-bit version of Lucid. I've done some considerable searching on this problem and although I've seen many references to similar problems dating back several years, I have found none that seem to have any solutions that do anything for me. I never had this problem under any prior version of Linux on this box (all prior versions were also 64-bit).

In short, this block of messages repeats in my messages log:

May 18 20:18:50 mark-desktop kernel: [10121.062129] e1000e: eth0 NIC Link is Down May 18 20:18:52 mark-desktop kernel: [10122.730873] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX May 18 20:18:52 mark-desktop kernel: [10122.730876] 0000:00:19.0: eth0: 10/100 speed: disabling TSO

Most of the time I don't even see that the connection has gone down. Sonetimes everything seems to be operating fine for a half-hour or more, although it could be dropping out and coming back really quickly all of the time. Sometimes it goes out for 10 seconds.Sometimes it goes out for many minutes and I can get networking back by killing disabling networking and then re-enabling it. It's quite annoying.

I'm sorry if I'm duplicating an existing issue on this forum, but I can't find this exact problem anywhere. Does anyone have any clever ideas about how to fix this?

View 5 Replies View Related

Ubuntu Networking :: Install Drivers For Network Card?

Jul 4, 2010

I installed ubuntu netbook remix (the new version 10),and when I try to install drivers for my network card it says I need an internet connection,when I cant access the internet,I even tried using a wired connection (since I usually connect via wireless),but still its no use. My netbook is the following: [URL]...

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved