Installation :: Install RPM Files On Fedora?

Jun 18, 2009

How do you install RPM files on Fedora? I am running Fedora 11.

View 5 Replies


ADVERTISEMENT

Fedora Installation :: Full Install F11 From Upgrade Files Download

Jul 29, 2009

I was happily running F10 and against my better judgement when it offered to upgrade me to F11 I decided to give it a try. The F11 install hung at 893 of 1626 packages installed. Some SE Linux package was in process of install. On the next boot the installer fails to upgrade for a corrupted root. It says I can backtrack and do a full install, but crashes with a bug when I choose backtrack.

So here is my question - Can i edit the command line and tell the installer to full install rather than upgrade? Or am I stuck with downloading a DVD ISO and doing a full install that way. I've done F8, F9 and F10 so full install from DVD doesn't bother me.

View 11 Replies View Related

Fedora Installation :: Downloaded The All Neded Dependencies And .rpm Files, But Cant Install Them?

Mar 8, 2011

A game I found recently through an web repository. Downloaded the all neded dependencies and .rpm files, but cant install them.. terminal output below:'

Code:
[root@localhost Downloads]# yum localinstall luola-1.3.2-2.fc6.rf.i386.rpm luola-levels-1.3.2-1.0.rf.noarch.rpm luola-debuginfo-1.3.2-2.fc3.rf.i386.rpm

[code]....

View 2 Replies View Related

Fedora Installation :: Samba / Network Folder And See Other Computers Shared Files And Share Files?

May 5, 2010

I am used to Ubuntus simple sharing with samba. Just install it, reboot and then share the files.Then do I klick on network folder and see all the shared files on the computers in the network.

How do I install it so I only need to go into network folder and see the other computers shared files.Then, how do I share files?

I hope it's not so difficult and that I have to change i config-files.

I am new to Fedora.

View 4 Replies View Related

Fedora Installation :: Unable To Extact .rar Files - Error - There Is No Command Installed For RAR Archive Files

Jul 20, 2010

i am downloaded some e-books in the format .rar. when i am extracting them i am getting error as There is no command installed for RAR archive files. Do you want to search for a command to open this file?

View 3 Replies View Related

Fedora Installation :: HTML Files Instead Of RPM Files?

Mar 7, 2011

I recently upgraded from FC12 to FC14 due to errors using yum and rpm. I keep running into mirror sites with RPM files that don't install. These site have what appear to be valid RPM files, but if I use wget to retrieve the file and run "file" on it, it turns out to be an HTML file. I understand the fact that if a file is corrupted, it won't install, but I can open these "RPM" files using Mozilla after changing the extension from RPM to HTML. When I open the new HTML file, I'm prompted by the browser to open or save the RPM file. If I save the RPM file pointed to by the HTML file, I can download and install it using rpm -ivvh unless a dependency check fails. how does anyone install using yum if the package is an HTML file with an RPM extension. Here is a link as an example:

[URL]

If I use wget on this file and then run "file" on it, here is the output:

file openoffice.org-calc-core-3.3.0-20.2.fc14.i686.rpm
openoffice.org-calc-core-3.3.0-20.2.fc14.i686.rpm: HTML document text

If I change the extension of this file to HTML and open it with my browser, I am prompted to download the RPM file which turns out to be a true RPM v3.0 file. Is anyone else having this problem or can anyone point me in the right direction to download the correct RPM file. I am running behind a proxy server and have installed cntlm, configured wgetrc, yum.conf and .curlrc to use the proxy server. I am able to download and install most of the simpler applications where the dependencies are either installed or non required.

View 3 Replies View Related

Fedora Installation :: F13 On HP ML350 G6 - Installation Process Get The Screen That Shows The Files Copied - Freezes ?

Sep 30, 2010

I'm trying to install on HP ML 350 F13 G6 with standard array controller and 3 drives in raid 5. Well, when the installation process get the screen that shows the files copied (all copied...) , it freezes and does not advance more. Perhaps groped a firmware update? Other distributions are installed correctly.

View 2 Replies View Related

Fedora Installation :: Installation Migration - Back Up Personalized Files ?

Nov 9, 2009

I've had the same Fedora server (filewise) since it was RedHat, but I'm getting major issues with an open Bugzilla report and I'm considering a brand new install.

The thing is - I've had files on this server since 1999, really, with personalized settings and everything in between.

Is there any easy way to start a fresh install (on a brand new hard drive) and migrate my files over? Otherwise, how does one do a fresh install without losing files and programs they've been painstakingly been trying to maintain for an entire decade?

I don't even know how to install half of this stuff anymore. The computer was on autopilot for the better half of the last 10 years.

Is there an easy way to back up settings and restore them?

View 1 Replies View Related

Ubuntu Installation :: How To Install Files From Anywhere

Jan 27, 2011

How do I install files from anywhere. I have some in my downloads folder and I cannot figure out how to get them installed.Also I have no sound in LInux, I have onboard sound that works great in windows, but not here, my sound did show up in hardware of the system/preferences/sound (but no actual sound) unitl: I have asked this question before and I got some suggestions of a couple of things to install and I installed them now my card does not even show up. I have Linux sound drivers on my motherboard cd, but linux will not even read the cd.

View 3 Replies View Related

Ubuntu Installation :: Install Tar.gz Files In 64bit 10.4?

Jan 12, 2011

Is it Possible to install tar.gz files in ubuntu 64bit 10.4?

View 1 Replies View Related

Ubuntu Installation :: How To Install Packages From .tar.gz Files

Jul 29, 2011

how to install packages from a .tar.gz file......

View 6 Replies View Related

Debian Installation :: PXE Install Lenny With Files From CD On Webserver?

Nov 1, 2010

I am having serious trouble getting Debian to install over our LAN using PXE/syslinux, a custom preseed.cfg, and the files from the DVD on a webserver. I think the problem is using the files from the DVD on the webserver instead of a mirror, but I believe this should be possible. I do not have enough space on the webserver to house an entire debian mirror.

[Code]...

View 10 Replies View Related

Ubuntu Installation :: Failed To Install Key Applications / Files

Jun 14, 2010

I have installed Lucid 10.04 server on an IBM eserver 325 dual boot with 2003. the cd rom drive on the server is starting to go out and the install worked but failed to install key applications and files. For examle- no VIM (just VI) and the apt sources.list file had one entry- the cd rom. I need to update all the packages necessary for the system to operate fully. ( I have tons of broken dependencies when trying to install SSHserver, Samba and other apps) I manually entered the muliverse and universe repositories in sources.list but this is not resolving the issues with the missing dependencies. I can get a new cd-rom drive but it will certainly take a week or two to get and I need to get this project going. I have some experience with Linux, but not enough to know if there is a magic command that I don't know.

View 2 Replies View Related

Ubuntu Installation :: 11.04 Install Hangs At Copying Files?

May 1, 2011

I am attempting to migrate from Mandriva to Ubuntu and attempted to install the 11.04 and 10.04 CD distos on a 7-year old computer (Elite Group L7VMM3 motherboard, 1.4 ghz AMD Duron, 1.2GB RAM, 40GB IDE HDD).

The 11.04 installation CD makes it through the HD partitioning (erase everything), Computer name, time zone, and keyboard detection, but hangs after starting the "Copying files" stage of the install. The progress bar stops just below the in "Copying files...".

The 10.04 installation CD makes it through the "Installing the base system", "Retrieving console-terminus" with the progress bar stalled at 6%. Although the computer is old, Vista successfully installs on it.

View 4 Replies View Related

Fedora :: Install Files With Extensions .tar.gz?

Jan 7, 2010

I am downloading the files, but don't know how to install.

View 1 Replies View Related

Fedora :: Yum Install - How To Track Where The Files Go

Apr 16, 2010

How to track where the files go when I issue:

yum intsall php

I wann know where exactly the files go? What will change?

View 3 Replies View Related

Fedora :: RPM Install Misses Files ?

Apr 5, 2011

I am trying to install openldap servers using the following command...rpm -i openldap-servers-2.4.22-7.fc14.i686.rpm

However the files /etc/openldap/slapd.conf and /etc/openldap/slapd.conf.bak are not getting installed.

I have run the "rpm -qlp" on the package and it says that it included both those files.

I have tried installing with the --allfile --noscripts --notriggers and --force options to see if there was something strange removing the file during installation, but the file is still not being installed.

Other files in the package appear to be installed without issue.

How can I get RPM to install these two files (the conf file is critical and it's a bit pointless to install the package without it).

View 5 Replies View Related

General :: Possible To Install RPM Bin Files On Fedora 11?

Aug 29, 2009

I'm running Fedora 11, however when I try to install an rpm.bin or a .bin file, it is not recognized. Java can be downloaded as a rpm.bin or a .bin file and it will not install.

View 8 Replies View Related

Debian Installation :: Can't Transfer Files From CD - USB Live Install Error

Jan 18, 2015

I am trying to install Debian over Kali since in order to use steam, newest version of wine and a few other things causes a change reaction that would require about two-thirds of my main os re-written with non kali files which makes me a little uneasy.

I have downloaded the debian-live-7.8.0-i386-gnome-desktop.iso from torrent from the link from debian download listings at debian.org. and I put it on a 8gb flash drive formated with gparted to a bootable fat32 partition and is listed as being /dev/sdc I installed the iso to the drive uss dd using the following code

Code: Select allsudo dd if=debian-live-7.8.0-i386-gnome-desktop.iso of=/dev/sdc bs=4M; sync

now it boots to the flash drive just fine with only the gnome3 drivers loaded by the live os isn't fully functional with my system. Ie. when I log into any of the live modes it gives me a message that it was switched to gnome3 [fallback] I am using the current version of gnome3 desktop manager installed from source on kali with out any trouble.

Also when I click the graphical installer or the installer modes from the grub i get a background image with some sort of artifiacts in the top inchish of the screen then everything but the mouse freezes. But when I go into one of the live modes and click the installer in their it opens just fine but when it starts transferring files it says that it couldn't transfer files from the cd after all the language and localization screens at the beginning.

I did find a misc page on the internet involving a cruchbang with the same problem [URL] I went to the folder in the usb drive in question and it looks like since that was originally post something has changed or it could have been a crunchbang format.

So basically I am asking did I do a step wrong should I try a different way of instillation, or do I have a corrupted image? also I am unable to use disk media due to the type of drives and disks I have access to.

View 4 Replies View Related

Debian Installation :: Can't Install Base System: Files Corrupt?

Jul 24, 2010

I downloaded the first Lenny DVD for amd64, wrote it but on trying the install on my laptop (Gateway NV5389u) I cant get past the installing base system step: I get an error that some files are corrupt / cannot be read from the DVD. I am wondering whether there's a way I can download a minimal version or just the files needed for the base system installation then use the same DVD to install the packages, coz I have a terribly slow internet connection it took me a whole 2 days to download, and I surely cant stand any more of it.

View 4 Replies View Related

Debian Installation :: Network - Find The Additional Files To Install

Sep 5, 2010

I have made a Debian minimal installer on a USB drive according to this manual: [URL] I have installed a minimal version of Debian, meaning text-only, with only the kernel, shell, filesystem, and a few programs. Now I need to install the rest of it over the internet. So here are my questions:

1. Where can I find the additional files to install?

2. Where can I find a manual that tells you how to install them? This manual doesn't say anything about that.

3. Are you supposed to install the files during the installation process, or do you get them online through the minimal Debian (using wget, etc.)?

View 3 Replies View Related

Ubuntu Installation :: Kubuntu Will Not Install - Skipping Missing Files

Jan 9, 2010

I just tried to install kubuntu 6 times on my laptop. I have downloaded the file from a different mirror each time and burned the image via brasero. This used to work for me... Kubuntu will not install. Keeps saying its skipping missing files or something. Anyone else getting this? I eventually gave up on 9.10 and am now trying alpha 1...

View 7 Replies View Related

Ubuntu :: Error: >> Sudo Sh Install >> Preparing Installation Files

Sep 15, 2010

I am trying to install matlab r2010b on ubuntu lucid and i obtain the following error:

>> sudo sh install
>> Preparing installation files ...
>> Installing ...
>> eval: 1: /tmp/mathworks_22884/java/jre/glnx86/jre/bin/java: Permission denied
>> Finished

View 2 Replies View Related

Ubuntu Installation :: Missing Python Files After Successful Install

Jan 5, 2011

I ran 'sudo apt-get install python', which completed successfully. According to [url, this should have created the directory /usr/lib/python2.6, but I do not see any such directory.

This is causing problems:

I've tried 'apt-get purge python' and then reinstalling but this has not resolved the issue.

View 2 Replies View Related

Installation :: Wget Install / Upgrading Main Distro Files

Jul 10, 2010

Recently I did a wget for DreamLinux 4beta6.3, which I now cannot burn to a disk. Another issue with linux in general being just a hobby. Why could a dev not set it up where you could just wget the upgrades for the main distro files themselves ?? We already do this when upgrading the apps, so why not the distro? Why could you not start at alpha, and just slap do a rolling upgrade into rc and beyond?

I understand the potential stability issues, but why can't we ghost the drive and hence have a backup on hand and then do this as outlined, and hence do a single install from alpha the distro's grave? I am wasting four months on "Setting Up" each install, only to wind up reinstalling again. This happens in every variation I have come across. Even in stable versions, the rolling upgrade just craps the install, and the major do overs hijacks all my data.

View 3 Replies View Related

Software :: BLAS Installation Using Yum Doesn't Install Header Files?

Jun 22, 2011

I installed BLAS using yum on my RHEL.

Code:
yum install blas
Also installed blas-devel
Code:
yum install blas-devel
There are shared objects in
/usr/lib/libblas.so.3
/usr/lib/libblas.so.3.0

[Code]...

But I can't find cblas.h file. Should I install something else to get the header file installed?

View 3 Replies View Related

Fedora Installation :: Error At Post Install Scripts For Fedora 10 Kickstart Installation

Nov 18, 2009

I am trying to install fedora 10 kickstart on my server.But I can't, because my kickstart installation hangs at post install scripts.It is not showing any message & stopped.

View 1 Replies View Related

Fedora :: Install *.tar.gz Files - No Acceptable Compiler?

Sep 25, 2010

for some reason I don't know how to install *.tar.gz files, I ommitted some of my files listed in the code after the ls command for simplicity

[Code]....

View 9 Replies View Related

General :: Install Downloaded FIles In Fedora 12?

Feb 9, 2010

How do I install downloaded fIles in fedora 12. For example fLASH_10?

View 6 Replies View Related

Ubuntu Installation :: Network Install From ISO - Cannot Transfer Files With Apache HTTP

Feb 24, 2010

I have tftpd-hpa and dhcp3-server up and running. I just want to install server edition via network, from the host machine (my laptop, running ubuntu 9.10) with an ISO file (ubuntu 8.04 32-bit server edition). I managed to boot the client machine with pxe-netboot technique, but instead downloading all the files from internet, I need to do this process directly from ISO. To transfer ISO from host to client, I also installed Apache. I unpacked ISO file into /var/lib/tftpboot/server/. I created a link to the Apache root: /var/www

Code:
ubuntu@ubuntu:/var/www$ ls
returns => index.html server
server folder is the place where I unpacked the ISO.

My dhcp3-server has this setup and it works well with netboot, but I don't know how to add Apache to the formula to transfer the iso file from host to client. Firewall is disabled. This is my edited /etc/dhcp3/dhcpd.conf file.

Code:
host pxeinstall {
hardware ethernet 00:06:29:DE:E3:CD;
fixed-address 192.168.2.4; (client IP)
next-server 192.168.2.2; (host IP)
filename "/server/install/netboot/pxelinux.0"; (relative to tftpboot)
} subnet 192.168.2.0 netmask 255.255.255.0 {
range 192.168.2.2 192.168.2.5;
option routers 192.168.2.1; }

When I pxe-boot the client, the process comes to a halt when tftp server is trying to access to pxelinux.0 file. I got thls error:
PXE-T00: Permission denied
PXE-E36: Error received from TFTP server
I have no experience with Apache... so I think there is a problem with my IP addresses.. Do I need to use 127.0.1.1 instead of 192.168.2.1 (my routers IP)?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved