I installed BLAS using yum on my RHEL.
Code:
yum install blas
Also installed blas-devel
Code:
yum install blas-devel
There are shared objects in
/usr/lib/libblas.so.3
/usr/lib/libblas.so.3.0
[Code]...
But I can't find cblas.h file. Should I install something else to get the header file installed?
How to install Blas and Lapack
View 4 Replies View RelatedI am using Fedora 12 with VMWare Player 3. I want to install the vmware tools. To get them properly working i need the location of the kernel header files. In which directory are they usually stored?
View 2 Replies View RelatedI am running VMware inside windows 7 64bit.I have installed ubuntu 2.8 ultimate edition on a 20gb partition and used 1gb of ram....everything is updated etc and running good. I checked in the VMware tools bar the entity tab,and says tools is not installed.
So when i run the install everything goes well untill it reaches the point where it says "What is the location of the directory of C header files that match your running kernel?
I have tried everything,different tutorials,installed a build package etc and it still asks for the directory. here is the uname r output :
uname r : 2.6.35-24-generic
I'm running BackTrack4r2 which is based on Intrepid. I'm pulling my hair out over this problem. As I try to install VMWare Server 2.0 I'm getting stuck at a question the installer poses: Where are the kernel header files located? It would make sense that they're in /usr/src/linux-2.6.35.8 but when I put that it just says there's no subfolder "linux" as expected and to try again. If I use the default location that VMWare says (/lib/modules/2.6.35.8/build/include) I get an error:
[code]...
I`m trying to install Intel EXPI9402PT PRO/1000 PT Dual Port Server Adapter on my machine. I download the drivers for this card from intel web page, but I can`t make it work. I`m running OpenSuse 11.3 version. When I tried to install it for the first time I got this message:
Makefile:71: *** Kernel header files not in any of the expected locations.
Makefile:72: *** Install the appropriate kernel development package, e.g.
Makefile:73: *** kernel-devel, for building kernel modules and try again. Stop
Then I install the kernel-source package and I got this one:
Makefile:107: *** Linux kernel source not configured - missing version header file. Stop.
I also installed kernel-devel package, but I get the same message.
When is it good to use separate translation units and object files and link them into the main C program, and when is it good to include the header files in the main C program? I don't understand if most people include header files or if most people just link in object files and use their contents in the main program. It's sort of a simple question, but it's confusing to me and that's why I need help with it. I sort of don't understand the difference, or if there's really no difference other than the way the final result is achieved, which way is better or preferred, etc...
For example:
Code:
or:
Code:
Simple explanation of the difference? or which one is preferred or better? I've read a little on the ELF format... so is there no difference in the end result? It's just a matter of preference or necessity, and where the information is to begin with?
I'm trying to compile a program on CentOS 5.2. It's giving the following error. Does anyone have a clue what it means?
/net/hulk/home4/tedhyu/openmpi/openmpi-1.1.1/install/bin/mpif77 -o quest_ompi.x lcaomain_tp.o utl_mpi.o lcaosubs_tp.o lcaosubs.o /project/source/seqquest/libs_32/scalapack-1.8.0/libscalapack.a /project/source/seqquest/libs_32/BLACS/LIB/blacsCinit_MPI-LINUX-1.a /project/source/seqquest/libs_32/BLACS
[code]....
I tried to update the header files manually in the include folder, because I thought that I needed to have windows.h etc, but now nothing compiles and I get a good 80 errors for even hello world. I have tried removing g++ and all related packages, deleting the header files folder and reinstalling, but it reinstalls the broken files. Any way of restoring the originals without reinstalling ubuntu?
View 1 Replies View RelatedI've installed Fedora 12 (KDE version) on VMware workstation running under Windows 7.
I've been able to configure the VMware tools fine up until this point:
Code:
What is the location of the directory of C header files that match your running kernel? After some searching online I deduced I should install all of the latest updates and kernel-devel.
I then nuked the previous VMware tools install and started over with it again, but alas, no directory I try works (i.e. /usr/src/kernels/, /usr/src/kernels/2.6.31.5-127.fc12.i686/ and so forth).
I'm trying to add a header to many .cpp files in a directory (or directory tree).
My attempt was:
Code:
If I put part of the command inside quotes the substitution occurs, but then I get other errors like:
Code:
cat:
No such file or directory
I could just write a small program to do it.
I am new to linux. I want to use a header file asm/msr.h. But the /usr/include does not contain the header file that I want. Can I just copy the whole asm directory into the directory /usr/include, and overwrite the old one?
View 2 Replies View RelatedI'm trying to install vmware tools in mint.
All goes well until I get to this -
What is the location of the directory of C header files that match your running kernel? [usr/src/linux/include]
When installing the vmware tools it says to just hit enter and the default will be used.
Hitting enter just keeps giving me the error message- The path "usr/src/linux/include" is not an existing directory.
I've started using the huge.s kernel and when i try to compile packages slackware complains about kernel headers but all i see is the smp header files on the slackware discs ?
View 2 Replies View Relatedi was trying to install iftop using make installso when i ran /configureit told me that some header files are missing and some modules aaare also missingis there a way to search for the missing header files on the internet and missing modules n the internet
View 1 Replies View RelatedI need to install some module which needs to be interated into OS's.
It asks me: "What is the location of the directory of C header files that match your running kernel? "
I know that I need kernel-devel package and I installed this yum install kernel-devel after that I have this /usr/src/kernels/2.6.32.26-175.fc12.i686/include/
Now when I run configuration it does not work
Does it mean that I need to update the kernel so that it matches to the kernel-devel module available in the net?
I am using Ubuntu 9.04 with kernel version 2.6.28-11-generic.I want to compile the foll. file but i get <linux/slab.h> no such file or directory.
The kernel headers are installed in my system at /usr/src/linux-headers-2.6.28-11-generic/ directory. During compilation i specified as follows:
Why gcc is unable to find the linux/slab.h header file?
I want to use kmalloc() to allocate contiguous memory on ram. But I can not seem to find the required header file(s) like linux/slab.h. I suppose I do not have the required library and I certainly do not know what and where to look.
View 14 Replies View RelatedI have been a predominant Windows user for a long time but shifted to Ubuntu recently. I was just trying out a few basic C functions when i realized that the "conio.h" header file isn't included in the libraries and therefore i was unable to use the "clrscr()" function.
I downloaded a tarball which contained the necessary library and header files including conio.h. Once extracted, i specified the location and included in the program as " #include "path to the header file" ".
I still didn't call the "clrscr()" function, and it compiled successfully. Next i edited the program to call that function and it gave the following error...
How i can add new libraries in the future?
New to programming having issues reference header files.
Not sure how to put the fomula in headers below:
Program
using namespace std;
I have written a simple library and ended up with a .so file. I have a header file from writing the code that describes how to use the functions in the source code I have written. I think this .h files needs to be available to other programs that access this code.
I have seen lots of tutorials on how to copy the .so file to the relevant directories and make links with the version number. What I can't find is where to put the header file so that any programs I write to use my new library can access the header.
Hope this makes sense. For example, I might use <stdio.h> normally, I will need to access <mylibrary.h> once mylibrary.so is loaded (as far as I understand!)
It's weird, I've been using C compilers for embedded processors over ten years now and never given a second thought to how libraries and headers work behind the scenes!
While setup of vmware on CentOS5.4 i am facing the below error.What is the location of the directory of C header files that match your runningkernel? [/usr/src/linux/include]
View 5 Replies View RelatedUpdate Manager popped up today and has a few Recommended updates for my machine. Included in the Recommended updates is a new kernel (2.6.32-25). Next to several of the kernel/header updates is the text "(New install)". What does the "New install" text mean here? Will installing the kernel/header updates do anything destructive to the system?
View 4 Replies View RelatedI just had a hard drive failure on my mythtv box that I had been running F14 on. I reinstalled F14 and just got about everything up and running like normal again except that I upgraded the kernel by mistake when I was upgrading everything else to current levels. The problem is that I run a hauppauge pvr150 on this mythtv box, and the code for capturing on this card is broken on the latest kernel version. I have the kernel headers and development files installed for the newest kernel that I can't really use, but I didn't install the kernel headers for the older kernel before the upgrade. Now, I am looking for a way to forcefully install the older kernel development files so that I can compile my the proprietary nvidia drivers against it for my adapter. I downloaded the rpm files from the fedora 14 repository directly. Is there an option for rpm that I can use to force the installation?
View 2 Replies View RelatedI'm working with a GuruPlug...maybe you've heard of them.I'm trying to get EasyCap DC60 drivers installed on it(easycap_dc60.0.9.tar.gz), but in the README file I see that the "header files" must be present.nfortunately they are not. This little wall wart runs Debian/Lenny, probably some server oriented build.uname -r reports:2.6.32-00007-g56678ecIt boots to RunLevel 2 and stays there, incidentally.I tried apt-get install linux-headers-$(uname -r) but I am told "file not found" or something similar
View 5 Replies View RelatedI have a program consists of header files, .cpp, .c, a Makefile and need to include the problem instances file (.tim).May i know how to compile and run them? From google, i have heard bout the command make.
View 6 Replies View RelatedDevelopment Package X has a header file that includes another header file, provided by package Y. But package X doesn't have the requires set to dependupon package Y.
Do you know any tools to check which packages has missing dependencies ?
Say I have a directory structure:
And other.c has:
How do I setup the CMakeFiles.txt files in each directory, so the executable "program" (from program.c) is created.
Currently I get the error:
I installed Codeblocks and build some programs, but I have two questions:1. Where are my header files placed, since I don't know where codeblocks is installed. Soemetimes I have to remove header file extension (.h) to be able to compile some source. I use gcc as setting for codeblocks to compile and build programs.2. Plugins for Codeblocks can be installed, but when browse codeblocks's wiki I can't find download links neither developer pages
View 3 Replies View RelatedI am trying to configure VMWare tools to work with the linux-virtual kernel, but every time I supply the headers path to vmware-config-tools, it rejects it. What should I do to configure it?I am using the path:/lib/modules/2.6.35-23-virtual/build/includeBut I get the rejection message:The path "/lib/modules/2.6.35-23-virtual/build/include" is not valid.It works with the generic version, so what am I doing wrong?
View 2 Replies View Related