Ubuntu Installation :: 11.04 Install Hangs At Copying Files?
May 1, 2011
I am attempting to migrate from Mandriva to Ubuntu and attempted to install the 11.04 and 10.04 CD distos on a 7-year old computer (Elite Group L7VMM3 motherboard, 1.4 ghz AMD Duron, 1.2GB RAM, 40GB IDE HDD).
The 11.04 installation CD makes it through the HD partitioning (erase everything), Computer name, time zone, and keyboard detection, but hangs after starting the "Copying files" stage of the install. The progress bar stops just below the in "Copying files...".
The 10.04 installation CD makes it through the "Installing the base system", "Retrieving console-terminus" with the progress bar stalled at 6%. Although the computer is old, Vista successfully installs on it.
View 4 Replies
ADVERTISEMENT
Dec 10, 2010
when I try to transfer files between flash drives, it starts to copy normally and then after few seconds it starts to lag. Transfer rate drops with each second by 0.2 MB down until 5 MB/s where it completely hangs. This happens to every single flash drive I put in and this is annoying because I have external HardDrive connected over USB port and I keep all my data in there, so when I try to transfer the files from the hard drive to the flash drive - it lags and hangs. Same thing if I want to copy from internal harddrive to flash drive. Although everything is fine when I copy from the flash drive to the internal harddrive and everything is fine when flash drive or the external harddrive is alone (no other flash drives or something is connected).
I am also using Ubuntu 10.04. I have tried transfering files on my netbook running ubuntu, because I thought that it might be a USB port issue but the same thing happened on the netbook too...
View 1 Replies
View Related
Jul 14, 2011
I am running an old p4 system with the latest ubuntu. It has been working wonderfully until today. It all of the sudden starts to hang when copying or even just accessing files from one specific hard drive. I have read that this is an error with ext4. Is there anyway to fix this?
It would be extremely difficult for me to transfer all of these files over if i don't know whether or not it will hang.
View 2 Replies
View Related
Sep 7, 2011
I built a centralized storage system a year ago (Aug. 2010) and for the past 10 months it has preformed flawlessly. About two months ago (July 2011) I began having problems writing to my centralized storage. The copies (cp -rpv) fail whether they are nfs or samba mounted disks to my centralized storage.
Attempting to copy either frame sequence (.dpx, .tiffs, .targas) or .MOV files now lock up my system and knock my storage offline.
The error that continues to echo back when this happens is :
I have not made any changes or updates to my storage configuration since building it last August 2010. I have reached out to Areca, and they found nothing wrong with the Raid Controller or my Raid settings.
I tried to troubleshoot all the basics - swapped out cables, replaced the WD storage disks, changed switches still the problem persists.
If anyone else has experienced this issue please let me know what you did to fix it. I can also post any error logs or message logs if that would be of assistance.
Below are the specs of my storage system
View 1 Replies
View Related
Nov 9, 2015
I currently have a problem in running rsync on 64 bit Debian Jessie (although the problem also occurred with 64 bit Debian Wheezy)I am trying to use rsync to archive my home directory (which is on a hard disk) to a USB memory stick. The home directory is about 18GB in size and the memory stick has 32GB.
Unfortunately, rsync hangs after copying a certain number of files and the process eventually has to be killed. Rsync was rerun but hung again at about the same point as before.This has now happened several times. Each time the hang occurs at about the same point.Use of strace after the hang shows that rsync appears to be processing a pdf file at the time, although not always the same pdf file.I originally had the rsync hang problem on a PC which ran 64 bit Wheezy and which used a USB 2.0 port.
I now am running rsync on another PC, which runs 64 bit Jessie and which uses a USB 3.0 port..I have also tried three different USB sticks, two from one manufacturer and the third from another manufacturer.All give similar rsync hangs.
View 11 Replies
View Related
Jul 27, 2010
I am dual booting XP and Ubuntu 10.04, but in the future I will be getting a new machine and I will only be running Ubuntu and won't have access to iTunes. Because I have an iPod Touch, I have been trying to find workarounds for syncing everything that iTunes took care of in the past. One problem I have is managing movies. I have looked through various media players/iPod management tools (Amarok, Rhythmbox, gtkpod) and I am using Rhythmbox to sync my music and and attempting to use gtkpod to sync my movies.
gtkpod is able to sync songs (Tested with a few minute test clip) and short *.mp4 files (15mb I know for sure from test). I am unable, however, to get it to sync a movie (~700mb) I am able to drag it onto my iPod in gtkpod, but when I try to save the changes and write the files, it hangs at "Copying Tracks" at 0%. It eventually crashes during the couple times I have tried to wait it out. So this being my situation, my question is, is there a size limit to the *.mp4 files I can sync to my iPod Touch via gtkpod? is there any other tools that you know of that I can sync videos to my iPod with?
View 9 Replies
View Related
Jun 13, 2010
I am trying to install KUbuntu and the installer is struck at "copying files." The first time the installation went fine besides grub not booting properly. So I went ahead and tried to reinstall Kubuntu and now the installer hangs at 15-23% at copying files. I've already erased a bunch of partitions and told the installer to install the OS on "the largest contiguous free space" and it still hangs. To be honest I haven't allowed to it hang at 23 percent for more than one hour.The CD is not the issue as I've tried both Kubuntu and Ubuntu installers with the same result.
View 4 Replies
View Related
Jun 2, 2011
After waiting copying files it stops at (I tried twice,the same command):
Code:
Jun 2 16:20:53 ubuntu kernel: [ 848.790255] [<ffffffff 9100ce20] ? kernel_thread_helper+0x0/0x10
When I first uninstalled it (about a month ago) I have the Ubuntu at reboot but when I run it says something about a file etc etc...
First time worked but the internet connection didn't work.
View 2 Replies
View Related
Mar 3, 2009
I've been having trouble copying files. When I try to copy something, it starts copying, and after a few GB, I suddenly get an error. It tells me its unable to write to the disk. After this, the only way to be able to write to the disk again, is to reboot the system. I then get to copy a few more files before the same error appears. The partition in question is formatted as ext3, using opensuse 11.0 with KDE.
View 3 Replies
View Related
Jun 2, 2011
I have an Asus eee 1000. Was running Ubuntu 10.04 netbook remix quite happily for some months until recently when I had some problems and decided to reinstall. Unfortunately that is when my real problems began. I have tried using various CD.s with Ubuntu 10.04 desktop and Ubuntu 10.04 Netbook remix.
Both give the same error - The installer encountered an error copying files to the hard disk: [Errno 5] Input/output error
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment.
I tried using an SD card to install - that also gave errors. I tried installing Windows as much as I hate it and, annoyingly, that installed without any problems whatsoever. Then I tried using the Alternate Install disc. That gave me a different error - did everything and apparently installed a "basic" system but failed to install software. Struggled to find an answer to that. How I can get Ubuntu 10.04 back on my netbook. As it stands at the moment I am rapidly coming to the conclusion that I will have to install Windows or buy a new netbook - this seems preposterous!
I have seen that many people have this error and so it seems like some sort of bug. The only clue I had is that I did succeed in installing Ubuntu on my second 32 GB SD (the netbook has two (an 8 GB and a 32 GB). Unfortunately this SD appears much slower than the first so I erased it and went back to trying to get it on the 8 GB as before. Now it won't install on either - gives the same error. I do not believe that both my SD.s can be faulty and so I can only assume that somehow they both need erasing or formatting or something before I can reinstall.
View 1 Replies
View Related
Apr 9, 2011
in the middle of copying files from my comp to my cellphone the Xp has crashed. When reboot, got a notification that:rootnoverify (hd 0,0)NTLDR is missingchainloader +1I found a way to possibly repair the xxxxxp, I just don't know if it can mess up my suse side, have 11.3this is the solution for xp;If you get the "NTLDR is Missing" error, follow these instructions:
1. Load Windows XP CD into CD drive.
2. Make sure BIOS is set to boot to CD drive.
3. Boot the computer from CD.
[code]....
View 4 Replies
View Related
Jan 17, 2010
"The installer encountered an eror copying files to the hard disk: [Errno 30] Read-only file system
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. ..."
Before I try changing CD drives, re-formatting the hard drive (again), or cleaning the CD drive, I must add that Xubuntu did open. I got rid of all traces of the previous operating system (WinME), and Xubuntu seems to work pretty well. The installation stopped at 41% of copying files. Should I aim for a finished installation or is this fine?
View 9 Replies
View Related
Dec 2, 2010
Each time, different methods, I get this about 3/4 of the way through:
The installer encountered an error copying files to the hard disk:
[Errno 5] Input/output error
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment.
The only possibility of those is the CD being bad. But I've used it before, recently, and it was fine. I will burn another one from my other computer and try, but it shouldn't be doing this.
Question: If I plan to only use Ubuntu on this computer (no dual boot) should I make the /,swap and /home partitions all Primary or some logical, or does it even matter?
View 6 Replies
View Related
Jan 25, 2010
Problem : centos 5.3 hangs while remotely copying data onto this server.
I have A centos 5.3 x86 Version installed on Xeon Quad core , running on 8 GB DDR2 RAM, RAID 1 confgured on SATA drives. this was old installation copy and It has many more things running on it.Therfore, I can't just reinstall it.
I have setup SAMBA PDC + ldap on it. I encounter that system hangs when I copy data into this server from LAN computers.
My troubleshooting steps :
1. I have checked for network issue , My network works fine when I transfer data between other LAN compuers.
2. Even I have tried confguring seprate LAN....
3. I thought their might be some problem with my SAMBA configuration, therefore I did data transfer from sftp .
View 3 Replies
View Related
Aug 23, 2010
I am installling ubuntu on my old (2003) Dell D800 laptop with celeron processor, using a CD (burned at home). The installation process is hanging for about 24 hours now; it says "copying files..." with progress at 63%. The progress has not changed for about 10 hours.
I have a single hard drive on the machine (... noticed issues with dual drives on this forum, so thought I'd mention).
View 1 Replies
View Related
Apr 17, 2011
Just got a new toshiba nb555d notebook and decided to try installing 10.10. It didn't work with my wireless card right away so I tried 11.04 and everything functions well running the "try ubuntu" from the live usb. When I go to install ubuntu beside my windows partition, the installation gets to the "Copying Files" part and then the netbook slows to a stall. I can move the cursor around but it moves very slowly, and I am unable to click anything. I have tried 3 times and it always seems to freeze at the same place, somewhere around 25%.
View 9 Replies
View Related
Feb 14, 2010
I've discovered that Dolphin seems to lose random files when copying many large folders.
I first noticed this a few months ago when I tried to copy my music library from one folder to another on the same HDD. It consisted of around 600 folders and 6500 files. During the copy there were no errors but after the copy I found that some of the newly copied folders were missing files. I put it down to human error or a glitch.
Yesterday I tried to copy 13 folders containing rips of some of my DVDs. Each folder basically had one film of either 700MB or 1.4GB. Again no errors showed up during the copy but I found 3 of the newly copied folders were empty.
It's not so critical with music or films but I can't afford to lose work data like this.
Has anyone experienced or seen a similar problem with Dolphin? I'm going to have to do some more extensive testing but this is not good.
The first time I noticed the problem I was running KDE4.3.4 (I think) and now the latest was with KDE4.4.0.
View 9 Replies
View Related
Jan 27, 2010
Have been running 11.1 on a generic notebook (eRacks) just fine until a few days ago when CUPS couldn't be reached. Rather than futz more with 11.1, I decided to install 11.2 (which has been on my desktop). Using the same CD, which continues to check ok, the install has failed many times at about the same point: 87% through "copying root filesystem" in yast2.
Specs: Intel P4 2.4 GHz, 1.5 GB RAM, ATI radeon PV250Lf
The HD was partitioned into /, swap, /home, and an extended partition of /opt, /var, /usr. Only / was ext4 and the rest were ext3. Tried various options:
* no apic
* no acpi
* "noapic acpi=off" entered manually
* Vesa instead of 1024x768
Each time had to edit partition table to mount the extended partitions. Always formatted /. At first didn't format the extended patitions, later formated all but /home. Then set yast2 to format / as ext3, to match the other partitions. In the sysinfo page the / partition is now shown as /mnt containing 723.6 MB out of 7 GB, still formatted as ext4. On rescan by yast2 partition manager, / shows as ext3. The install halts every time with an error while "copying root filesystem." Tried booting from the CD direct to install and to the Live OS followed by install--same result. So, hours later, went back to 11.1--which installed in minutes.
View 4 Replies
View Related
Mar 5, 2010
I have the following system using an ATI graphics card, SATA Drives and want to install Fedora 12 as a dual boot option with Windows XP.
Using an install DVD it seems that Fedora installs then at a point during the copying of packages the screen goes blank actually switches off. The DVD Drive and Hard drive still work , my guess is completeing the install. On reboot I do not get the option to boot to linux.
I have 2 SATA 3Gbs Hard Drives formatted for windows NTfs. One has 2 partitions and some free space, the other is formatted NTFS and is my data disk.
I would like to be able to access the data disk with both Windows and Linux and install Linux system in the free space.
Having read a few of the guides available, none of them seem to mention this problem, although I am aware of the Ati support problem. I am hoping I do not have to replace my graphics card with a nVidia one.
View 2 Replies
View Related
Aug 25, 2010
I'm a Linux newbie and are trying to install F13 from bootable USB onto the HD of a DELL mini netbook. I've followed the install wizard's defaults including the "Use All Space option." The install errors out at about 20% of progress during the "Copying live image to hard drive" process. The error dialog is as followed:"There was an error installing the live image to your hard drive. This could be due to bad media. Please verify your installation media..." and it comes with options to Exit installer or Retry. I have since retried and restarted several times and still came to the same error. FYI, I've initially attempted to install F13 to the HD over an existing Windows XP.
View 2 Replies
View Related
Aug 11, 2011
Trying to install Ubuntu (tried several releases) on HP Pavillion Pentium 4 Proccessor 515 2.93 Gig 1M L2 cache 533mhz 90nm . Have 1 gig ram and 1Tb hd. Hangs on initial install screen for ever. Tried versions from 8.10 (origional disk) to 11.01. Machine works perfectly on Windows XP but who wants that? The model is pavillion 1000 system number pl397aa.
View 7 Replies
View Related
Feb 15, 2011
I am trying to install Ubuntu 10.10 x64 on a HP Pavilion p6565uk.
My PC is x64 compatible, although ubuntu will not install.
I don't get to any gui, it says ubuntu will continue install in 5 seconds, at 0, nothing happens. The CPU light is flashing, but nothing happens.
After about 10 minutes, it reboots, but when the HP splash screen shows (Before the boot selection screen) it just hangs. I have to do a hard shutdown to boot back up.
I am using wubi for install.
View 1 Replies
View Related
Jun 14, 2010
I am a neophyte to linux so please cut me some slack. I'm installing the latest version of ubuntu on my old Dell Latitude C840 Laptop. (386 desktop install from CD). I cant seem to get past 79% completion. It just hangs there. I have to assume I'm not the first person to have this problem. I'm reasonably adept with computers but all of the threads/blogs that seemingly address this problem are lost to me. Can anyone provide a simple... or at least step by step process on how I can fix this?
View 1 Replies
View Related
Dec 21, 2010
I'm trying to upgrade an EeePC from 9.10 (I think it is) to 10.10. I've tried two different thumb drives and a CD, redownloading the UNR image each time. What happens is it will get the the screen where it says 'Preparing to install Ubuntu-Netbook'. I hit forward, and then the little dial just spins indefinitely. I've also tried plugging the thumb drives into different USB ports, and playing around the with the hard disk compatibility mode on in the BIOS (currently set to 'compatible', but AHCI, IDE Enhanced etc made no difference).
View 9 Replies
View Related
Apr 4, 2011
I have installed Ubuntu 64bit 10.04 LTS version. I am trying to install open-iscsi and my apt-get install commands hangs code...
my sources.list seems to be fine. What might be the issue?? never had this issue on a 32 bit version of Ubuntu 9.
View 1 Replies
View Related
Jan 9, 2010
I just upgraded my system's motherboard with an Asus M4N78 Pro and did a clean install of 9.10. The install seems to go fine but when it finishes and does the final restart I seems to get stuck at the place you'd normally see the GRUB menu. Instead all I see is a black screen with a flashing cursor in the left corner. This isn't just a long boot, its stuck. It never progresses past this point.
During the install everything seems fine. Video, network etc. I've tried several reburned CDs and I get the same result each time. For the record I've installed Ubuntu as a single partition an IDE drive. The bios is set to boot from that drive. ow the heck can I figure out what is happening? Is there a way to boot and display any and all messages displayed? Is this thing hanging in GRUB somewhere?
View 4 Replies
View Related
Oct 8, 2010
I can not get ubuntu to install on my workstation. I have the 64-bit cd (am currently trying the 32-bit cd with similar results) and it won't install. I get to the ubuntu splash screen with the 5 dots underneath it and it looks like it's trying to run for several minutes. After the several minutes, the screen simply goes black and I can't do anything.
View 8 Replies
View Related
Jan 17, 2011
I just installed Ubuntu 10.10 on a vostro 1000 laptop using standard configuration.I repartitioned the whole disk for Ubuntu. Now, when starting up Ubuntu, it appears to log in fine, but right near the end of the theme and before the desktop loads, it hangs, repeating a slice of the intro music over and over again. What could be causing this problem?Note: On every ubuntu disk I use, it also says that modules/..../Kernel something is missing from the disk quickly before booting the live session.
View 1 Replies
View Related
Mar 30, 2011
I'm on an HP Pavillion dv1000 laptop. I used a live CD to install Ubuntu 10.10 to an external USB hard drive. The install completed successfully, but after a reboot I am stuck on a black screen with a white cursor. Before that I see nothing but the initial HP startup screen. I am able to run the live CD without problems, and I have been running Ubuntu from a 4GB thumb drive (which I installed on using the same live CD that I used to install on my current external hard drive). I had no problems whatsoever running from the CD or thumb drive, so I can't figure out why the external hard drive would be so different.
View 7 Replies
View Related
Jan 19, 2010
I need to copy some files from an OpenBSD 4.5 server to my Ubuntu set up via flash disk tell me what commands to enter on each in order to do this please? I believe OpenBSD is UFS and I'm running 9.10 so Ubuntu is ext4
View 9 Replies
View Related
