Debian Installation :: Can't Transfer Files From CD - USB Live Install Error

Jan 18, 2015

I am trying to install Debian over Kali since in order to use steam, newest version of wine and a few other things causes a change reaction that would require about two-thirds of my main os re-written with non kali files which makes me a little uneasy.

I have downloaded the debian-live-7.8.0-i386-gnome-desktop.iso from torrent from the link from debian download listings at debian.org. and I put it on a 8gb flash drive formated with gparted to a bootable fat32 partition and is listed as being /dev/sdc I installed the iso to the drive uss dd using the following code

Code: Select allsudo dd if=debian-live-7.8.0-i386-gnome-desktop.iso of=/dev/sdc bs=4M; sync

now it boots to the flash drive just fine with only the gnome3 drivers loaded by the live os isn't fully functional with my system. Ie. when I log into any of the live modes it gives me a message that it was switched to gnome3 [fallback] I am using the current version of gnome3 desktop manager installed from source on kali with out any trouble.

Also when I click the graphical installer or the installer modes from the grub i get a background image with some sort of artifiacts in the top inchish of the screen then everything but the mouse freezes. But when I go into one of the live modes and click the installer in their it opens just fine but when it starts transferring files it says that it couldn't transfer files from the cd after all the language and localization screens at the beginning.

I did find a misc page on the internet involving a cruchbang with the same problem [URL] I went to the folder in the usb drive in question and it looks like since that was originally post something has changed or it could have been a crunchbang format.

So basically I am asking did I do a step wrong should I try a different way of instillation, or do I have a corrupted image? also I am unable to use disk media due to the type of drives and disks I have access to.

View 4 Replies


ADVERTISEMENT

Debian Installation :: Transfer Files From Squeeze Platform To Windows?

Mar 8, 2011

Last month I installed (not upgrade) squeeze in place of lenny on my dual boot laptop where the other OS is windows 7 Home basic (both C and D drives). I just noticed it today that while I can get any file from the windows to my squeeze I am not permitted to put any file to windows. As far as I remember I was not asked during squeeze installation whether the windows drives would be read-only drives. This difficulty was not faced when I had lenny. Can this problem be remedied now without going through a re-installation?

View 3 Replies View Related

Ubuntu :: When Add Files In /home/user/myfiles - Do Not Transfer To The Live Cd

Feb 14, 2011

I want to add files to the live cd. I use distcdfs because backup errors out because i have too much data on dive. I have the modify set to exclude everything but what I want. when i add my files in the /home/user/myfiles they do not transfer to the live cd? I'm using the gui so what I'm I doing wrong?

View 1 Replies View Related

Ubuntu Installation :: Network Install From ISO - Cannot Transfer Files With Apache HTTP

Feb 24, 2010

I have tftpd-hpa and dhcp3-server up and running. I just want to install server edition via network, from the host machine (my laptop, running ubuntu 9.10) with an ISO file (ubuntu 8.04 32-bit server edition). I managed to boot the client machine with pxe-netboot technique, but instead downloading all the files from internet, I need to do this process directly from ISO. To transfer ISO from host to client, I also installed Apache. I unpacked ISO file into /var/lib/tftpboot/server/. I created a link to the Apache root: /var/www

Code:
ubuntu@ubuntu:/var/www$ ls
returns => index.html server
server folder is the place where I unpacked the ISO.

My dhcp3-server has this setup and it works well with netboot, but I don't know how to add Apache to the formula to transfer the iso file from host to client. Firewall is disabled. This is my edited /etc/dhcp3/dhcpd.conf file.

Code:
host pxeinstall {
hardware ethernet 00:06:29:DE:E3:CD;
fixed-address 192.168.2.4; (client IP)
next-server 192.168.2.2; (host IP)
filename "/server/install/netboot/pxelinux.0"; (relative to tftpboot)
} subnet 192.168.2.0 netmask 255.255.255.0 {
range 192.168.2.2 192.168.2.5;
option routers 192.168.2.1; }

When I pxe-boot the client, the process comes to a halt when tftp server is trying to access to pxelinux.0 file. I got thls error:
PXE-T00: Permission denied
PXE-E36: Error received from TFTP server
I have no experience with Apache... so I think there is a problem with my IP addresses.. Do I need to use 127.0.1.1 instead of 192.168.2.1 (my routers IP)?

View 3 Replies View Related

OpenSUSE Install :: Installation Progress Stops In 88% / Message Error / Error Copy Live Image To Disk

Oct 12, 2010

Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.

View 9 Replies View Related

Debian Installation :: Installing Live USB - What ISO Files To Download

Jan 8, 2015

I have a USB which I want to use for a 'live' debian OS. I have debian 7.7 on hard disk and will be using Unetbootin to transfer the .iso file onto the USB.

However, when I go the debian archive there are so many iso files for the particular debian pkg [URL] .... There's iso, iso.contents, iso.log, iso.packages and iso.zsync. Do I download all of these iso files?

I'll be doing a Code: Select allsha256sums <iso-filename> to make sure the downloads aren't corrupted. But when I use Unetbootin and get it to write the main .iso file onto USB, do I then repeat this process with all the other iso files for the OS?

View 14 Replies View Related

Fedora Installation :: Error W/ F13 Install To HD During Copying Of Live Image To Disk

Aug 25, 2010

I'm a Linux newbie and are trying to install F13 from bootable USB onto the HD of a DELL mini netbook. I've followed the install wizard's defaults including the "Use All Space option." The install errors out at about 20% of progress during the "Copying live image to hard drive" process. The error dialog is as followed:"There was an error installing the live image to your hard drive. This could be due to bad media. Please verify your installation media..." and it comes with options to Exit installer or Retry. I have since retried and restarted several times and still came to the same error. FYI, I've initially attempted to install F13 to the HD over an existing Windows XP.

View 2 Replies View Related

Ubuntu Installation :: Install From A Working Live Cd But Got Medium Not Found Error

Feb 23, 2011

heres what happenned:

1. had working xp install on 320 gb hard disk with only one partition.
2. backed up and used easeus to shrink and create new partition on same hard drive.
3. tried to install from a working live cd but got medium not found error.
4. looked for fix but didnt find it so i used wubi to install it to the partition i created.
5. worked but annoyingly slow so looked for guide to switch from wubi to full install.
6. followed guide and it installed to a new partition i made with gparted and it formatted that one to ext4 but i still had the wubi install which i didnt want. (btw, non-wubi is much > wubi install).
7. went to xp to uninstall wubi, delete wubi partition, and grow full ubuntu install partition with easeus. easeus requires reboot.

8. restart comp to find an error that said no partition found and something else about grub rescue.
9. try live cds but hard drive not detected and tried win7 and xp but they didnt even get into setup
10. make plan: get bro to format my hardd disk using his compyter so i csn try ubuntu onw more time

i got a bunch of different types of errors but im really close to giving up on it entirely.

View 8 Replies View Related

Debian Installation :: Live Crashes With Error - 0x8DF6 Init Table Command Not Found

Dec 26, 2014

I'm trying to boot into the Live CD (64bit version) and it dies with an error "nouveau .... 0x8DF6 Init table command not found: 0xA9". Get the same error after I install and try to boot into Debian, it starts booting but errors out later.

Running Intel 4770K on Gigabyte Z97X-UD5H with 8G ram, Nvidia graphics card and several SSDs ...

View 3 Replies View Related

Debian :: SSH - Can't Transfer Files In One Of The Directions

Jun 26, 2011

I have a laptop connected to the internet through wifi, and a desktop connected directly to the router. I can trasnfer files of any size, with scp, from the desktop to the laptop; on the other hand, I can transfer small files (a 4,0K file, for example), but not files with some tens of megabytes, from the laptop to the desktop.

When I try to transfer a big file, the transmission starts at normal speed (around 2 mb/s), and then it slows down, and the message "stalled" appears where the remaining time was.

View 2 Replies View Related

Debian :: Files Transfer To Virtualbox

Dec 10, 2015

I am trying to transfer a files from my linux to my windows 7 virtualbox but how to do it. I installed samba as a server and bridged the virtual machine to my physical LAN but i just don't know how the real transfer is achieved...

View 7 Replies View Related

Debian :: Transfer Files Over Network?

Jan 15, 2011

I have 2 debian computers set up, and would like to transfer files from one to the other. I hooked up a cable to each of them, but how do I transfer files?

View 4 Replies View Related

Debian Installation :: Cannot Install Squeeze Live DVD

Sep 15, 2010

A Linux user for about 10 years, distro hopping for half of them. Finally found peace with PCLinuxOS (great distro), and MintLinux. When Mint went over to Debian, I thought why not try the original, so here I am.Booted the dvd, checked everything was working well (excellently, actually), and started the install over an existing PCLinuxOS system (dual booting with XP). First time installed while inside the gnome system, from the desktop icon, second and subsequent times from the welcome screen after boot (only text modes were available).In all cases, everything goes fine until I partition and install the packages. Partitioning is no secret to me, unless there is a "Debian way" of doing it: went through "guided partitioning," and chose the existing PCLinuxOS partitions, 37 Gb for /, ext3 (tried ext4 later with same results), and 2 Gb for swap, both on sda (sda1 and sda5). This is a full hard-disk, just for Linux. The other disk is for XP (sdb).

Tried formatting existing partitions, erasing contents of disk, and keeping as is. In all cases, when partitioning is done, the system installation fires up and I see all packages being transferred (up to 100%). Then I have a pop-up window telling me to continue to package manager, which I do, but then I get a message saying that I am trying to install on an "unclean target," over an existing installation (even after fully erasing the disks). It asks whether to continue or not and, whatever I do, I'm taken back to system install again, and see the progress go up to 100% and the same question again.

If I go back to the install menu and ignore the message, jumping to installing grub, I get an error message saying that grub install has failed, and that's it. I can't progress further because of these error messages.If I ignore all and boot without the live dvd, I get a prompt and nothing else, and I can't even use XP. Basically, I'm stuck unless I install another distro again to have a working system.First searched this forum and Google to get answers to this problem, but couldn't find anything applicable to my case.

View 14 Replies View Related

Debian Installation :: Install From Squeeze Live CD / DVD

Jan 2, 2011

I burned an .iso of a recent Squeeze Live DVD - KDE edition. I was checking it out but I'm not sure it's reliable for installing.I was wondering if anyone has tried it or could comment.I noticed a few things that was a bit disconcerting.One, there were a lot of 'question marks' in the kickback menu.Is that normal?Two, when you (I) try to reboot the system or otherwise 'leave' the live state, it doesn't reboot properly.Some distributions will 'shut down' and then give you a prompt for taking out your CD or DVD and then there is some script or program that reboots the machine for you. But, the Debian Live DVD I used didn't do that. It's a recent one, dated Dec. 20.What happened is that it just looped back and re-started.There was no prompt or even much of a delay. I couldn't open the optical drive tray at any time.I had to cold restart the machine so I could take the DVD out.

I was disappointed since I thought it is a good project and a worthwhile venture to try and have a live media option for installing the later editions of Debian such as Squeeze or if they can keep up progress, whatever edition it's at.I am a bit hesitant to try this version for a true install so I am wondering what others say.I thought I should go for the 'desktop Squeeze/Testing AMD-64-KDE' CD ISO instead?There's no live media but I have tried the live DVD so it looked okay other than the two issues mentioned.

View 2 Replies View Related

Debian Multimedia :: Can't Transfer Files From KDE To Android 5 Via USB

Aug 26, 2015

I have a new smartphone with Cyanogenmod 12 (based on Android 5) and a new ext SD card in the phone which has been formatted. I turned on "USB debugging" in Android and connected the phone to Debian KDE with a USB cable. The phone shows up and mounts, and I can browse the files in Dolphin and copy from the phone to the desktop, but I can't copy from desktop to phone or modify the contents, even on the ext SD card. In Dolphin I always get the same error message, "writing to camera is not supported", even though I mounted the device as MTP* (not PTP) and even though I'm trying to write to the ext SD card which is not even where the phone camera stores things.

I chose to mount as MTP within Android. I don't know if I also need choose an MTP option within KDE somehow, or how to do that.

View 4 Replies View Related

Debian Installation :: Install A Live Cd Onto Hard Drive?

Feb 7, 2010

Can you install a live cd onto hard drive? I'm in a live environment now and don't see an install option.

View 10 Replies View Related

Debian Installation :: Install Live To A 4 GB Flash Drive?

Apr 12, 2011

I am trying to install Debian Live to a 4 GB flash drive. I am using UNetBootin to extract this (debian-live-6.0.1-i386-gnome-desktop.iso) file to a FAT32 partition on my flash drive. It installs fine, and shows me the SysLinux menu fine, but when i choose live(or anything else) it says"Invalid or Corrupt Kernel Image". I also tryed these other installers. pendrivelinux's Universal USB Installer. It gives me the same message. win32diskimager gives me a different Debian menu, but the same problem. Does anyone know what is wrong, and how to fix it. It is driving me nuts!

View 11 Replies View Related

Installation :: Burned Live C.d Of Debian 6 - No Option To Install

Feb 8, 2010

I burned a live c.d of debian 6 today, it works really great but there is no option to install it. I've done lots of installs off c.ds where it says " install" right at boot up, as on option. is there a way to install this?

View 3 Replies View Related

OpenSUSE :: Bluetooth File Transfer Error: The Name Org.openbox.client Was Not Provided By Any .service Files?

Apr 20, 2011

I was trying to copy a few files to my phone via bluetooth when the file transfer window popped up with the progress bar stating "Connecting" and an error: the name org.openbox.client was not provided by any .service files..

I am using: openSUSE 11.3
Gnome 2.32, Kernel 2.6.38,
obex-data-server 0.4.5-12.2,

[code]....

View 3 Replies View Related

Debian Configuration :: Transfer Large Files Between Windows ?

Jul 17, 2011

I would like to transfer my music library and movie collection from my Desktop computer running Windows Vista and my laptop running Debian Squeeze. I have the laptop connected via wireless but it's possible to connect the two either directly with a CAT5e cable or through the router. I'm just wondering what the best way to do this would be.

View 8 Replies View Related

Debian Installation :: Mac Pro 1.1 - REFIt Won't Show Install And Live Disks At Startup

Mar 19, 2016

I have a Mac Pro 1.1 and am having trouble installing Debian. I installed rEFIt but it won't show my install and live disks at startup. I have very little experience with the command line but would be willing to try. I have installed debian to my pc and used the command line successfully there, but want the OS for my mac.

View 4 Replies View Related

OpenSUSE Install :: Transfer(copy, Move...) Files To Windows?

Aug 13, 2011

I am runnig WinXP and OpenSUSE 11.4 on dual boot.Generaly i am using SUSE, XP only for UpNP Media Center(server) to watch movies stored on my computer on TV via STB.For this i am using TVersity for wich i not found yet Linux alternative - or better say - i found it but is too heavy for my PC(P4 1.6 Mhz, 768 MB RAM, an dinosaur from Nvidia Vanta with 64 MB RAM)But this is not a part of my question.My question is how to transfer(copy, move...?) files from SUSE to WinXP?A large files like avi, mkv, mostly movies.I solved this to copy them on USB and then from USB to Win.This is a very slow proces because my PC have only USB 1.0And before asked me - all files are legaly downloaded from paysites.From SUSE, partitions(disks), folders and files under WinXP are visible but is not possible to copy files on them - acces is denied.Is there any way to do this?Suse is insatlled on LVM - /root/home/swapI am interesting ONLY to copy files from SUSE to Win, not at al from Win to SUSE.Code:

Directory: /home/janez
Sun Aug 14 07:53:26 CEST 2011
janez@linux-cia6:~> su - root

[code]...

View 5 Replies View Related

Ubuntu :: Error: >> Sudo Sh Install >> Preparing Installation Files

Sep 15, 2010

I am trying to install matlab r2010b on ubuntu lucid and i obtain the following error:

>> sudo sh install
>> Preparing installation files ...
>> Installing ...
>> eval: 1: /tmp/mathworks_22884/java/jre/glnx86/jre/bin/java: Permission denied
>> Finished

View 2 Replies View Related

Debian :: Can't See HD Files When Booted From Live USB

Jun 18, 2015

Windows has been crashing systematically on my old netbook, so I booted debian from a liveUSB. The reason I don't want to install it outright is that I didn't backup my files, so my plan was to do the backup with live debian. Yet, for some reason, Debian's "File viewer" doesn't "see" my HD files. That is, my disk is listed as a mounted device and I can see all its directories ("Downloads", "My Documents" and so on) but they all seem to be empty.

So I try from the terminal, where "dir" on /Downloads effectively returns the list of all the files I remember I had there. So on my first attempt I try to copy one single file to /home, that is,

Code: Select alluser@debian:/media/user/36AEF3F8AEF3AE8D/Users/xxxx/Downloads$ sudo cp filename.jpg /home
(/media/user/36AEF3F8AEF3AE8D is the mount point for the /dev/sda2 filesystem) and I get

Code: Select allcp: error reading 'filename.jpg': Input/output error
cp: failed to extend '/home/filename.jpg': Input/output error

View 5 Replies View Related

Debian Installation :: New Install Debian As VB Host With Kernel Error

Feb 22, 2010

I'm somewhat familiar with Ubuntu (familiar but not sharp!) but have never tried Debian OS until now. I've installed Debian 5 64bit as a guest on a Mac host. I'm impressed how smooth the install went; even installing VB Guest Additions went smoothly. But, I get a "Your system had a kernel failure" error after booting. I have searched the forum & didn't find this error. Everything seems to work okay but is there an update that isn't showing in the Update Manager? Could this have something to do with VirtualBox 3.1.4?

View 4 Replies View Related

General :: RSYNC Error .tar.gz 14gb File / Transfer Huge 14 Gb File Over Network,vpn,wan Transfer?

Mar 10, 2010

i am trying to transfer a file from my live linux machine to remote linux machine it is a mail server and single .tar.gz file include all data. but during transfer it stop working. how can i work and trouble shooot the matter. is there any better way then this to transfer huge 14 gb file over network,vpn,wan transfer. the speed is 1mbps,rest of the file it copy it.

rsync -avz --stats bkup_1.tar.gz root@10.1.1.22:/var/opt/bkup

[root@sa1 logs_os_backup]# less remote.log
Wed Mar 10 09:12:01 AST 2010
building file list ... done
bkup_1.tar.gz
deflate on token returned 0 (87164 bytes left)
rsync error: error in rsync protocol data stream (code 12) at token.c(274)
building file list ... done
code....

View 1 Replies View Related

Fedora Installation :: Transfer Install Image To USB Drive, Then Install?

Dec 10, 2009

I don't have a working DVD burner. I'd like to transfer the FC12 install DVD image to a USB thumb drive, and install from there. Is that reasonably easy to do?ow would I transfer the .iso file for the install image to the USB thumb drive in such a way that I could boot from i

View 1 Replies View Related

Debian :: Building Live CD And Getting - Error

Jul 30, 2010

I am currently working on Debian based Operating System, and my objective is to make a live CD.

I ve followed the specified steps to buid a live CD, and finally I ve made an .iso file too.

Now,I am facing some issues to execute that .iso on Qemu(Virtual Interface),those are:

1. While builing it into an .iso,I skipped the md5sum step, is that mandatory to be built for making a live CD?

And when I am trying to make an MD5SUM using the following command, Its giving me the following error:

Kindly specify me, where exeactly the error in the command for creating the md5sum?

2. While executing the .iso file in Qemu using the following command :

And the I am able to watch the Operating System booting initialization and then when I select the option as "Install as Live CD" Its giving me the following error:

I request who ever reads this thread, please send me some kind of a response.I'll be thankful to them.

View 1 Replies View Related

Ubuntu :: Transfer Installed Programs To New Live Cd?

Apr 11, 2010

i am using Ubuntu 9.10. I want to make a live CD with some programs installed i know i can do that by chroot ,etc. but i cannot re-download all packages again due to bandwidth limit. The packages i want to have on my live CD are already installed on my OS.(i usually clear the cache after installation to save disk space). Is there a way to transfer the programs to the live CD.

ps. all the programs are installed either by deb's or apt-get, none by source...

View 3 Replies View Related

Debian :: File Transfer Will Be Constant As The Minecraft Server Will Constantly Updates Files On The Web Server

Aug 27, 2011

I have 2 computers on the same network that i need to link together to transfer files 1 is a web server the other is a minecraft server. the problem is that the file transfer will be constant as the minecraft server will constantly updates files on the web server and I dont want it to go to the router then to come back to the web server. I want to add a second network card to each computer and link them together and use this second connection to transfer the files is it possible?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved