General :: Install Downloaded FIles In Fedora 12?
Feb 9, 2010How do I install downloaded fIles in fedora 12. For example fLASH_10?
View 6 RepliesHow do I install downloaded fIles in fedora 12. For example fLASH_10?
View 6 RepliesA game I found recently through an web repository. Downloaded the all neded dependencies and .rpm files, but cant install them.. terminal output below:'
Code:
[root@localhost Downloads]# yum localinstall luola-1.3.2-2.fc6.rf.i386.rpm luola-levels-1.3.2-1.0.rf.noarch.rpm luola-debuginfo-1.3.2-2.fc3.rf.i386.rpm
[code]....
"You'll probably want to operate from inside your home directory. If your user is (for example) username, your home directory will be /home/username/. For the rest of this section we will assume you have downloaded your zip file to /home/username/src. If you do not have a src directory, you can create it with the following "mkdir" (make directory) command:"
Where do the commands go? I cant make it work in terminal. How do I get back to "home" from where i am now? example /home/mydesktop/. I am working in mydesktop. I have downloaded some packages that pkcon search will not find, but when I try to install them using "synaptic" it cant find the packages i dl. So I found this tutorial.
"So, we have our source package in /home/username/src/.
Change to the /home/username/src/ directory with the "cd" (change directory) command like so: cd /home/username/src/
but I dont know where to write the commands.
Just installed Ubuntu 11.04 32-bit on an older Dell D610 laptop. Everything was running a little slow but all in all running fine except one thing - I downloaded the Chrome deb file and also the deb file from Moneydance. When I double-click on either of these deb files, it opens up the Ubuntu Software Center and shows an 'Install' button for the app. I click Install and then enter my root password, then nothing happens. A short while later the Install button turns from grayed out to clickable again. So I click it again, and it says that the deb file is not packaged correctly.
I've tried it with multiple deb files now and get the same thing. Installing directly through the Ubuntu Software Center works fine, but unortunately Chrome and Moneydance aren't in there (I prefer Chrome to Chromium). What could be causing this?
Also - due to the slowness of the Ubuntu install I did a clean install to Xubuntu and I like that much better and it is running perfectly except for this issue of not being able to install any 3rd-party downloaded apps.
I just switched to a faster isp with monthly usage limits. When I install a program using Synaptic, where are the install files stored? I'd like to save them for future use. Also, I'm downloading Conky right now to monitor usage.
View 8 Replies View RelatedI have just downloaded fedora cds iso image it contain six zip files:
Fedora-12-i386-disc1
Fedora-12-i386-disc2
Fedora-12-i386-disc3
Fedora-12-i386-disc4
Fedora-12-i386-disc5
Fedora-12-i386-netinst
I want to know what is the last one used for?
Is there a stand-alone SWF viewer I can use to view downloaded SWF files on Fedora please? I know there's a browser plugin, but it does not have any controls to pause or rewind the file - it just plays the SWF file from start to end. I've tried using Mplayer, but it does not appear to support playing SWF files.
View 2 Replies View RelatedWhat files do I need to download for installing Suse11.2. Which is the best distro to install for a novice ?
View 3 Replies View RelatedI just upgraded from F12 to F13 and the result is a mess. From F11 to F12, I*used preupgrade and it worked flawlessly. This time, the process ended on a blank screen. So, I downloaded the DVD and I suppose the files downloaded by preupgarde were used as there were almost no connections to the net during the upgrade process. The problem now is that apparently almost all the FC12 files are still on my system:
rpm -qa | grep fc12
telepathy-stream-engine-0.5.11-1.fc12.x86_64
pbm2l2030-1.4-5.fc12.x86_64
keyutils-libs-1.2-6.fc12.x86_64
apr-util-ldap-1.3.10-1.fc12.x86_64
iwl4965-firmware-228.61.2.24-2.fc12.noarch
rdiff-backup-1.2.8-3.fc12.x86_64
[Code]...
Of course, as I said, the previous upgrade went flawlessly and I didn't check what happened on the system with the rpm and locate commands but I doubt is looked that bad. Seeing what kind of mess my system was turned into, I now worry about the next upgrade.
I have ran into a permissions problem. It seems that any file I have created with Fedora I can browse to in Firefox. I cannot browse to files that I have downloaded from the internet or copied locally across our network. I changed file permissions to 755 and 777 for these files. I even thought that maybe it was the php file content that was causing the issue. So, I copied the file content from file 2 into file 1. File 1 was the file I could always browse to since I created it in Fedora. I could still browse to file 1 after it had file 2's content.
I look at the permissions and they appear the same for both files. I am not sure why I cannot open the other files. I downloaded phpMyAdmin. I cannot hit any of these files in a browser. I also copied some files from a a backup location we have internally. I cannot browse to any of these files either. I used chmod 777 filename. Even after doing that I could not hit any of the files. I moved the files into my document root directory ( /var/www/html ) and I still cannot browse to these files.
I download a file to my laptop desktop, it saves above and behind the panel menubar (Applications / Places / System). As such, the files aren't easily accessible.How might I ensure that downloaded files are visible on the screen and not 100px above & behind it? Perhaps related, I've got a second monitor attached to the laptop (primary). It seems this second monitor's resolution is affecting where downloaded files are put...out of sight.
Primary laptop: Dell Vostro 1310. Resolution = 1280x800
Secondary monitor: Acer 19-inch LCD Flat Panel. Resolution = 1280x1024.
I've tried all the settings in Monitor Preferences to no avail. Searched Google without luck. Currently on Ubuntu 10.10 and the system is (according to Update Manager) up-to-date.
It's a newbie question that has probably already been answered hundreds of times, but Google didn't help me.
How can I install an application I've downloaded from the internet?I know I can easily install software with the terminal (apt-get, yum etc.) and that there is also a package manager. But still I'd like to know how to install an application I've downloaded with the browser. I've downloaded Thunderbird from this link URL...and after unpacking, I have a folder called 'thunderbird'. Now, what do I have to do to install the application?
I'm not actually concerned with installing Thunderbird anymore because when I typed 'thunderbird' in the terminal, it told me that it isn't installed and if it should be installed. I replied 'y' and some minutes later (slow internet connection...) it was installed and ready to use..
I am very new to linux. I just got the dual boot working a couple of days ago. Now I downloaded MATLAB (2009b) from my university website. It came in a zip file...well I have no clue how to install it. I looked at the instruction manual, it doesn't really explain much.
View 5 Replies View RelatedI have downloaded the live media for Fedora 14 to an 11gb partition of my hard drive. After that I cannot figure out how to install it. I have previously had ubuntu linux earlier this year, but had a bad experience when I downloaded a boot loader for it.
View 2 Replies View RelatedI have downloaded 7ZIP and located the download using "find" in "search for files". I am providing two snaps. Kindly guide me thru' the process of installation of 7ZIP onto the desktop.
View 11 Replies View RelatedI got an HP mini 1120NR as a gift and it runs Linux software. I am not sure which version, but I think its Edubuntu and I do not know how to actually open and install a downloaded program file from the web. A specific example is Adobe flash player. It goes into a list and asks me to open it with Archvie Manager, but after that I am lost.
View 14 Replies View RelatedI download new versions of Firefox, extract them but don't know how to install them.
View 5 Replies View RelatedI just installed FC14 on an ASUS Eee Pc with Realtek WNIC (RTL8191SE) and I am trying to install the driver for the WNIC which I downloaded from Realtek's website. There is a problem though during the 'make' command and this is the output
[code]...
what is this 'build' that is looking for? what can I do to fix this?
I downloaded, through the torrent, the Pink Floyd's Live in Gdansk concert. It first downloaded as an ISO and when I unzipped I now have 5 CD folders with bin files in them. I've searched and followed many different instructions to open the bin files but nothing is working. How to be able to listen to the music?
View 4 Replies View RelatedI switched from 9.10 to 10.10. In 9.10 there was a folder where the temporary flv ..... video files were downloaded, so I could capture them before being deleted. Now with 10.10, which is the folder? /tmp isn't, I'm watching videos but no flashxxxxx files there.
View 6 Replies View RelatedWhenever I download a file using Firefox or Google Chrome and it has a ' character on it's filename, the file is renamed and a is added before the '. It's really annoying and I'd like to know how can I solve this issue.
View 9 Replies View RelatedSo I downloaded a bunch of movies on Ubuntu, which work fine. They are on a shared drive, so when I look at them using Windows 7 they are displayed as a 'file' rather than an .avi
They can still be opened and played in VLC and play fine
I've downloaded 4 versions of Ubuntu and Kubuntu but I've had no success in making a CD. Downloading them at the same time should not have been the problem as I've done it before. This was done after a fresh install of 9.04 Jaunty I had a problem with previous installs I have of an upgraded lucid 10.04 Could several partitions cause a file corruption, I know I had a file problem with Ubuntu one across several partitions.
View 7 Replies View RelatedI'm thinking on trying Debian, I searched through their website and I went to the download site and I see there are 5 dvds torrent files? Which one should I download? I mean is debian that heavy that i need 5 dvds to get everything installed? By the way is there a kde version? I want kde.
View 6 Replies View RelatedI'm running Fedora 11, however when I try to install an rpm.bin or a .bin file, it is not recognized. Java can be downloaded as a rpm.bin or a .bin file and it will not install.
View 8 Replies View RelatedI have a download cap therefore when I install Debian, I like to have a backup of all downloaded .deb files that I can install from rather than download all over again. From what I've read, it should be a simple case of copying the .deb files to /var/cache/apt/archives and then install using apt-get. But apt-get seems to 'ignore' them. Am I supposed to do something to get apt to use them? Bearing in mind, I need to do this from a console as there will be no DE.
View 5 Replies View RelatedDoes anyone know where the files downloaded from the Ubuntu One Music Store are stored?They are not in the Music folder or anywhere else in my home folder that I can determine, yet Rhythmbox sees them. I noticed that in the Rhythmbox preferences I can no longer specify one specific folder as a watch folder (it defaults back to "Multiple Locations Set"). I'd like to transfer the files I bought to a flash drive, but cannot find them.
View 9 Replies View RelatedIs there is any application to join files downloaded from rapidshare??Generally i use hjsplit to join these files in windows.. what application i have to use to join those files in ubuntu.They have an extension like 001,002,etc.
View 9 Replies View RelatedI'm looking for a script or a bittorrent client which is able to move a file after downloading and placing it in a specific folder depending on the file type. E.g. moving a newly downloaded movie to "Videos" and an ISO-file to "Files".
I feel as if i have used a client with this functionality before but can't remember the name.
Since I at the moment use Transmission as my bittorrent client a script would also work since Transmission can run it after finishing the download.
I've a problem with some downloaded files with Transmission. I use Transmission for downloading torrent files since I have installed Hardy Heron. Everything was ok. Last week I downloaded 25 GiB of files (dance videos, music and so on....) in my external hd. On sunday I try to move some of them in a dvd. As always I open Brasero and I search for them in my external hd: nothing. They don't exist in the destination folder, the same in 2 years with ubuntu, that I called "incoming Transmission".
So, I made some checks:
First:
- in Transmission -> right click on one of the downloaded, bright green and "invisible" file -> details -> informations -> position -> /media/hdext/incoming Transmission
Second:
- in pc Resources -> search file -> name of the same file inside /media/hdext/incoming Transmission...... Here it is!!!
Third:
- in the folder tree I mark "view hidden files": nothing! they're invisible!!!
If I open directly the destination folder I can't see them! In these days I continue to download other files, and everything goes on right.