Fedora :: RPM Install Misses Files ?
Apr 5, 2011
I am trying to install openldap servers using the following command...rpm -i openldap-servers-2.4.22-7.fc14.i686.rpm
However the files /etc/openldap/slapd.conf and /etc/openldap/slapd.conf.bak are not getting installed.
I have run the "rpm -qlp" on the package and it says that it included both those files.
I have tried installing with the --allfile --noscripts --notriggers and --force options to see if there was something strange removing the file during installation, but the file is still not being installed.
Other files in the package appear to be installed without issue.
How can I get RPM to install these two files (the conf file is critical and it's a bit pointless to install the package without it).
View 5 Replies
ADVERTISEMENT
May 6, 2010
I have a new install and I am quite surprised it just misses networking. That is, NO networking. ifconfig comes up with inly lo. Nothing else, most primal. It should use dhcp to connect, bit it fails to create the eth0 interface. Such a fundamental flaw is one I can't work on. Forget looking in network manager in the desktop, that's still being installed, I've checked the basic files in etc against karmic.
idella@squeeze:~$ cat /mnt/lucid/etc/network/interfaces
# Used by ifup( and ifdown(. See the interfaces(5) manpage or
# /usr/share/doc/ifupdown/examples for more information.
# The loopback network interface
auto lo
iface lo inet loopback
[Code]...
View 5 Replies
View Related
Jan 23, 2011
I'm kind of new to squid. I've looked at the proxy server using squidclient and am getting
Seems like a lot of cache misses is this normal?
I know there is stuff in the cache
Internal Data Structures:
It's wierd because misses looks like more than requests. I don't know if I'm reading this right.This is just a proxy on a home network with about 6 clients connected.
View 3 Replies
View Related
Mar 30, 2011
I updated my netbook to the last incarnation of slackware-current yesterday.
My problem is now, that it is no more able to start the ash shell of the initial ramdisk i am using. The ramdisk was created with the latest version of the mkinitrd script.
The error message is:
Code:
And the error happens when the ash from the initial ramdisk is intended to be started. Simply copying the /lib/libc.so.6 stuff (symlink to the real so and the real so) enables to ash to be started but later cryptsetup fails to load.
The initial ramdisk from mid-January i used before did not have such a problem. What i also see is, that the failing ramdisk has a size of only 16k blocks. The one from mid-January was bigger.
View 2 Replies
View Related
Apr 3, 2009
CentOS 5.3 x86_64.The GDM theme CentOSCubes misses a background2 file.I guess the file should be in the redhat-logos rpm package.
View 1 Replies
View Related
Jun 26, 2011
When I highlight a word then delete it, the word is erased as expected. But when I highlight a word and begin typing a word to replace it (instead of deleting or hitting backspace), the first letter of the unwanted word does not erase... so I am required to watch my text very closely when editing.
For example: I'll type the word "fungus" and then highlight it and type the replacement word "mold" and when I look at the text, the word is "fmold". Am I the only one with this odd situation?
View 5 Replies
View Related
May 1, 2011
I did a clean install of 11.04 and I have experienced that my separate X-screen does not have the program-name bar with the minimize, close-buttons etc. It's my third monitor is a separate X and it does not really work since I cant close programs, maximize windows or move them around. I cant even write anything on it. The first two monitors work great as one X-screen, just as they did in 10.10. Ubuntu Classic, no Unity. Two monitors (one X) on a ATI HD6970 One monitor (the X-screen that doesn't work properly) on a ATI HD4870
View 9 Replies
View Related
Jun 18, 2009
How do you install RPM files on Fedora? I am running Fedora 11.
View 5 Replies
View Related
Jan 7, 2010
I am downloading the files, but don't know how to install.
View 1 Replies
View Related
Apr 16, 2010
How to track where the files go when I issue:
yum intsall php
I wann know where exactly the files go? What will change?
View 3 Replies
View Related
Aug 29, 2009
I'm running Fedora 11, however when I try to install an rpm.bin or a .bin file, it is not recognized. Java can be downloaded as a rpm.bin or a .bin file and it will not install.
View 8 Replies
View Related
Sep 25, 2010
for some reason I don't know how to install *.tar.gz files, I ommitted some of my files listed in the code after the ls command for simplicity
[Code]....
View 9 Replies
View Related
Feb 9, 2010
How do I install downloaded fIles in fedora 12. For example fLASH_10?
View 6 Replies
View Related
May 28, 2011
I've just switched successfully from ubuntu to fedora today. Basically I am really happy with fedora, most problems I had I could solve (with the help of the Internet). However 2 major problem remain:
�) I am unable to run .jar files. I've already installed the "Java" package from the repo, but it didn't help. When typing code...
worked without problems, however a quick test (.....) told me that flash isn't working. When I try downloading and installing flash manually from the adobe site I get a message that this package is already installed.
View 5 Replies
View Related
Apr 12, 2009
I am unable to mp3 files on fedora 7 . So i have downloaded
vlc-0.9.8a.tar.gz but does no how to install it in my computer .
View 5 Replies
View Related
Jul 29, 2009
I was happily running F10 and against my better judgement when it offered to upgrade me to F11 I decided to give it a try. The F11 install hung at 893 of 1626 packages installed. Some SE Linux package was in process of install. On the next boot the installer fails to upgrade for a corrupted root. It says I can backtrack and do a full install, but crashes with a bug when I choose backtrack.
So here is my question - Can i edit the command line and tell the installer to full install rather than upgrade? Or am I stuck with downloading a DVD ISO and doing a full install that way. I've done F8, F9 and F10 so full install from DVD doesn't bother me.
View 11 Replies
View Related
Apr 4, 2010
I have same problem with *.bin files.When I try to install software from *.bin file I see error:
Code:
[andrew@notebook Programming]$ ./installbuilder-qt-professional-6.3.0-linux-x64-installer.bin
bash: ./installbuilder-qt-professional-6.3.0-linux-x64-installer.bin: Access denied
[andrew@notebook Programming]$
When I run command ls -la I see this:
Code:
[andrew@notebook Programming]$ ls -la installbuilder-qt-professional-6.3.0-linux-x64-installer.bin
-rwxrwxrwx. 1 andrew andrew 82624164 Апр 4 16:39 installbuilder-qt-professional-6.3.0-linux-x64-installer.bin
[andrew@notebook Programming]$
This error exist if I try to install this application with root access. What I mast do for fix this error?
P.S. I have Fedora 12 x86_64 on my notebook ASUS M51Sn.
View 6 Replies
View Related
Mar 8, 2011
A game I found recently through an web repository. Downloaded the all neded dependencies and .rpm files, but cant install them.. terminal output below:'
Code:
[root@localhost Downloads]# yum localinstall luola-1.3.2-2.fc6.rf.i386.rpm luola-levels-1.3.2-1.0.rf.noarch.rpm luola-debuginfo-1.3.2-2.fc3.rf.i386.rpm
[code]....
View 2 Replies
View Related
Jan 5, 2011
i just finish doing a fresh install of F14 and i have problem with video playback. I have added rpmfusion free and non free as describe in [URL] also Nautilus do not show thumbnail from video files.
[bamf@bamf ~]$ su -c 'yum localinstall --nogpgcheck http://download1.rpmfusion.org/free/...ble.noarch.rpm http://download1.rpmfusion.org/nonfr...ble.noarch.rpm'
Password:
Loaded plugins: fastestmirror, langpacks, presto, refresh-packagekit
Adding en_US to language list
[code]....
note: i have vlc, smplayer and ffmpegthumbnailer installed on the system but still no video thumbnails in Nautilus.
View 8 Replies
View Related
Dec 19, 2008
I normally tried yum lock for installing players like
yum install xmms xmms-mp3
but it starts and when
primary.sqlite.bz2
starts download it stops after sometime & try another mirror &
finally never install
what is the problem?
View 5 Replies
View Related
Jul 7, 2011
When I install wine the add/remove program wants to install both 86_64 and i686 files. I have the x86_64 version of Fedora 14. I am having problems with counterstrike and have installed it using Wine, have noted problems when both types of files are installed.
I would like to have Fedora set up just right but as with all Linux distros, am having trouble keeping my head above water with fc14. I have success up to a point and then want to go back to Windows for its simplicity. Just this wine problem
View 1 Replies
View Related
May 5, 2010
I am used to Ubuntus simple sharing with samba. Just install it, reboot and then share the files.Then do I klick on network folder and see all the shared files on the computers in the network.
How do I install it so I only need to go into network folder and see the other computers shared files.Then, how do I share files?
I hope it's not so difficult and that I have to change i config-files.
I am new to Fedora.
View 4 Replies
View Related
Jul 20, 2010
i am downloaded some e-books in the format .rar. when i am extracting them i am getting error as There is no command installed for RAR archive files. Do you want to search for a command to open this file?
View 3 Replies
View Related
Jan 13, 2010
On a KDE4 environment after downloading some music from rapidshare with JDownloader the archives self-extracted with the symbol in some of the file names. Those files couldn't be renamed or deleted, the file manager said that the files didn't exist - very weird. The files should have had some swedish characters in their file names. Now I'm stuck with those files on my machine. Anyone knows how to get rid of them?
View 2 Replies
View Related
Apr 15, 2011
Fedora provides several compression techniques. E.g tar, tar.gz, zip etc. I want to know which among them provides
1. the best compression ratio for text files
2. the best compression ratio for binary files
3. fastest compression
View 6 Replies
View Related
Feb 11, 2010
Before installing Fedora on my laptop I backed up my files onto a USB key. I wiped the hard disk and installed Fedora 12. I copied my files back to my home directory - but all the text files are now binary! Any ideas why this would be or how to fix it??---------- Post added at 10:54 AM CST ---------- Previous post was at 10:35 AM CST ----------Hmm it seems that only some files are binary. Looks like some .tgz files are corrupted too.---------- Post added at 11:02 AM CST ---------- Previous post was at 10:54 AM CST ----------Damn - I wonder if the files weren't completely written to the usb key before I removed it. I don't remember their being a safe mount option in Fedora 10 - but I definitely unmounted it before removing it from the laptop.
View 1 Replies
View Related
Oct 7, 2010
I noticed in my system that my root partition is getting full. I found a lot of old compacted syslogfiles. Had a look at etc/sysconfig editor eg cron but could not find a setting which allows to delete files older than a month. Where and how could I influence this ? I deleted manually all syslog files older than a month. Approx 6GB
View 9 Replies
View Related
Mar 7, 2011
I recently upgraded from FC12 to FC14 due to errors using yum and rpm. I keep running into mirror sites with RPM files that don't install. These site have what appear to be valid RPM files, but if I use wget to retrieve the file and run "file" on it, it turns out to be an HTML file. I understand the fact that if a file is corrupted, it won't install, but I can open these "RPM" files using Mozilla after changing the extension from RPM to HTML. When I open the new HTML file, I'm prompted by the browser to open or save the RPM file. If I save the RPM file pointed to by the HTML file, I can download and install it using rpm -ivvh unless a dependency check fails. how does anyone install using yum if the package is an HTML file with an RPM extension. Here is a link as an example:
[URL]
If I use wget on this file and then run "file" on it, here is the output:
file openoffice.org-calc-core-3.3.0-20.2.fc14.i686.rpm
openoffice.org-calc-core-3.3.0-20.2.fc14.i686.rpm: HTML document text
If I change the extension of this file to HTML and open it with my browser, I am prompted to download the RPM file which turns out to be a true RPM v3.0 file. Is anyone else having this problem or can anyone point me in the right direction to download the correct RPM file. I am running behind a proxy server and have installed cntlm, configured wgetrc, yum.conf and .curlrc to use the proxy server. I am able to download and install most of the simpler applications where the dependencies are either installed or non required.
View 3 Replies
View Related
Mar 16, 2011
I Have downloaded the ATI Drivers for my GPU From url.ymp But When I try to open the file This Message Appears :
This has happened After I Have Updated My Packages using
Code:
zypper update
View 3 Replies
View Related
Nov 23, 2010
I have two files a.txt and b.txt.
a.txt content:
b.txt content:
What i am getting is by shooting----- #cat a.txt b.txt >> c.txt:
Desired output in c.txt the second number should be in new line:
View 3 Replies
View Related
