Fedora Installation :: Error At Post Install Scripts For Fedora 10 Kickstart Installation
Nov 18, 2009
I am trying to install fedora 10 kickstart on my server.But I can't, because my kickstart installation hangs at post install scripts.It is not showing any message & stopped.
I'm doing a Kickstart install of Fedora 11 with a DVD ISO as the installation source and the ks.cfg file in the root folder of the DVD. The error message I get is: "Unable to read group information from repositories. This is a problem with the generation of your install tree."
I have created a customized RHEL 5.4 DVD and placed a Kickstart file in it.It is running fine except the post installation steps.I need to copy some files from DVD to the newly built server. For this I have modified my Kickstart file as below, but no luck.
I have not used Fedora in a long while (since version 5 I think).I am moving back to it for my new home server but there is something that is driving me completely crazy. Can you no longer do HDD installs from a ISO?I whipped out my old kickstart files and worked off of them and all seams to be OK but every time it says it is unable to find the install source.Here are the first two lines of my KS file:
I put a script into the post installation of kickstart and the log showed that the yum that is started in the script had to wait for yum to finish. I understand I can (and will) put this package in the packages section, but isn't it bad that yum is still finishing up when the post installation is initialized? Has anyone else noticed this?
I performed a clean install of Fedora 15 from DVD and it goes fine until the end when the install program says to reboot the computer. Once I do that, the computer hangs before Grub loads, i.e. just after all of the BIOS messages, so there isn't any error message to indicate what is wrong. I had no issues with Fedora 14.
I am installing Fedora 10 on my system.After the package installation, a post install screen appears.And the installations halts for a long time and does not proceed further.
I'd like to write a kickstart file that installs available Fedora 14 updates as part of the installation process, much as if I was doing a standard Fedora 14 installation and had enabled the 'updates' repo.
So my question is, is there an easy way to do this? I don't want to have to go down the route of downloading all updated packages and maintaining my own update repo (or indeed, creating a repo with the dependencies listed above).
trying to install Fedora 10. I'm novice in linux. Nut tryed some distros before, installation/config, fedora 9, Ubuntu 7-8, Suse 10, mandriva. everything was ok. Now i've new rig:
1 DVD install i386 after booting asks me media from where i want install errors: CDinstallation: No Cd drive with installation media HDD installation: can't find boot image (NTFS C: in winXP). 2 DVD install x86_64 same. 3 NetBootCD 2.2. installed on flash with liveusb-creator. once booted (most progress with this one), started formating process, asked root, after again showed me that no media. after again tried to install on USB error "no boot media on POST screen". 4 Billix downloaded USB version, pated on USB stick edited file , changed mirror from i386 to x86_64 can't boot even. 5 Downloaded fedora 10 Live Gnome desktop slipstreamed onto usb stick with liveusb-creator. booted: showed GRUB boot many. choosing boot or verify and boot fedora three lines on boot loading, after it shows me my Ethernet connection like "100mb full duplex link ready" after nothing only this text stays on desktop.
I'm using couple of Intel Core i7 based workstations. Here is one such example:Processor: Core i7-870 (Lynfield) Motherboard: Gigabyte P55A-UD6RAM: Corsair DDR3-1600 - 8GB (4 sticks). Graphics: Sapphire Toxic ATI 5850 - 2GB - DDR5Am always used to 32-bit Linux installation. Now I would like to go with the FC14 64-bit on this workstation. My question is:a) How different would be a FC 64-bit compared to 32-bit (8GB RAM issues I faced in Windows 7 32-bit)b) What would be potential problems during the installation and/or post installation. I get these questions in my mind because of Motherboard and Graphics card support and also thinking about applications (issues) on FC14.
I have made the ks.cfg file with system-config-kickstart and placed it in the root Disk1.iso's root directory.I then made the Disk1.iso with the changes done and burnt the whole Installation image on a CD-ROM.The machine was booted with the the Disk1 and it went well till disk partitioning.Then suddenly installation halted with a message: "Unable to read package metadata. This may be due to a missing repodata directory. Please ensure that your install tree has been correctly generated.
As the title says, I'm building a kickstart for a RedHat installation.I'm trying to incorporate the firegl driver rpm installation and its halfway working, not completly. What I've tried so far is to place the rpm in the --nochroot and in the normal chroot enviornment and neither one works. In the --nochroot, install it with rpm --root /mnt/sysimage/ and in the normal post i just do an rpm -ivh. In either case the fglrx folder is built within /lib/modules, however everything thats supposed to be installed never makes it to the newly installed root. I'm thinking that its actually getting installed to the installation / as opposed to the new /.
I'm trying to perform an install of F14 (fresh install over F13), and it has been showing "running post-installation scripts" for 1 1/2 hours now. I am wondering if this is unusual and what the implications might be of power-cycling and rebooting. I'd note this is a fairly fast machine with 2 quad-core Xeons (I forget their model number).
I am trying to kickstart the F13 alpha from a usb drive.The usb drive is labeled "disk" and is setup with extlinux and can boot fine.My laptop has one hard drive (sda) and the only other drive is the usb (sdbThe ISO is copied on the root of the usb diskI extract the boot files from the F13 Alpha ISO and copy them on the disk also
Which directly is accessible during the %pre section? I try to use wget to retrieve a file from FTP to /root but after the machine is build, I don't see that file in /root directory.
I want to install Red hat based custom OS in a complete automated mode.I ll have my kick start file inside the CD rom and when I boot with that ISO or CD.The OS should start installing by taking parameters from the kick start file without having to specify the path of the kick start file inside the CD.like "linux ks=<path>".Is it possible to achieve this by writing any script or something so that when the CD boots the kick start path is passed automatically to the anaconda installer.
I have successfully setup a kickstart environment for installing the original Fedora 13 using PXE/DHCP/TFTP. Now I want to build a customized kernel and install it using the same Kickstart setup. After building the new kernel.rpm file, what are right steps to do to replace the original kernel rpm in Kickstart RPM directory, like fixing modules dependency, creating new bzImage and intrid etc?
I just (for the first time ever) installed a version of Ubuntu. It is 10.04. I installed off of the Live Disk. I was having a great time until the first time I went to boot into it and I got the message "Error: No such device: "long number" Grub Rescue> "
I'm trying to set a kickstart DVD for automatically installing Fedora 10 without touching the existing data partitions on our systems. I've got a kickstart file that works great from a kickstart server however I'm having issues with creating an unattended kickstart DVD. I've attached a copy of the kickstart file from the DVD. For some reason even though all the packages we are installing are on the DVD, anaconda always attempts to connected to the internet to get repository information after completing the partitioning. I have changed the install type to 'cdrom' before anyone asks! I have removed my %pre and %post sections as these just copy in some config files and do not touch anything other than local paths.
I have recently been given the task of setting up some thirty odd netbooks with F10 and i was wondering if there is a way to generate a kickstart file from the first netbook (my one lol ) that i have setup to our needs so as to use it to create the same install on the rest of the netbooks. i had thought that i could use the anaconda-ks.cfg file in root's home dir but it is not at all representative of the custom package list i chose during the install.
Fedora 11. I am trying to setup kickstart so it lays out a mirrored volume group. I have 2 disks sda and sdb. I want a primary partition on each disk 200mb in size for /boot. This is to be mirrored onto raid device md0 (raid 1). The rest of each disk is to be setup partition which grows to use the remaining space, and is also mirrored (raid 1) md1. Onto md1, I want an LVM volume group called rootvg, and logical volumes set up on there for /, /home, /usr, /tmp etc. I can lay this out manually, and it works fine. However, the code below, which is slightly amended from a previous anaconda-ks.cfg file doesn't work.
Code: clearpart --linux --drives=sda,sdb --initlabel part raid.11 --asprimary --size=200 --ondisk=sda part raid.12 --grow --size=1 --ondisk=sda part raid.21 --asprimary --size=200 --ondisk=sdb part raid.22 --grow --size=1 --ondisk=sdb raid /boot --fstype=ext3 --level=RAID1 --device=md0 raid.11 raid.21 raid pv.1 --level=1 --device=md1 raid.12 raid.22
I have a kickstart script that attempts to create user "joeblow" with an encrypted password. The user is created okay, but the password does not seem to "take". After installation is complete, and the system is rebooted, this is the relevant portion of /etc/passwd:
Code:
This is the relevant portion of /etc/shadow:
Code:
Where there are two exclamation points, I would expect the encrypted password (as is the case for the root user, which is also created in the kickstart file).
The relevant line in my kickstart file looks like this:
Code:
That password string, which is 34 characters, is the word "password", encrypted with this command:
Code:
Also in my kickstart file is this line:
Code:
After the install is complete, I reboot and attempt to log in as "joeblow", but no dice. If I log in as root, and manually put the above encrypted password into /etc/shadow for jowblow, I can then log in as joeblow.
Everytime I attempt to install anything, in any way, I'm given the following error message:
E: lib32nss-mdns: subprocess installed post-installation script returned error exit status 2 E: wine1.2: dependency problems - leaving unconfigured
I went into Synaptics Package Manager and told it to uninstall WINE in case that was what was causing the problems. It sort of half-uninstalled-it then gave me that exact same error message.I have two threads currently open on the forums - adjusting laptop brightness and flashing BIOS - and both problems hit a brick wall because of this same error message.
I installed Fedora on IBM desktop PC with 40 GB. During installation I only created Boot and swap partitions and remain 30 GB as free space and now I want to create partitions from 30 GB free of Harddisk and I do in Windows XP and use Administration TOOL and create an other partition. so How I can create partitions on fedora after completed installation of Fedora Desktop. Need steps of post harddisk partition tool in Fedora.
I just upgraded to F15 and it went well. But at the next and each subsequent cold boot the BIOS reports "Your system last boot fail or post interrupted Please enter setup to load default and reboot". The board is an asus P5N-D. I press F1 to blow past the error and all is well until the next cold boot. Restarts are fine, no errors at all.