There is no prompt for choosing whether I boot windows or Linux it just takes me to Linux. I need to install and load some things from windows and can't figure it out.
View 1 Replies
can someone direct me how to install Ubuntu as a dual boot on my open suse 11.2 I could not find any installing instructions. if someone could give me a link or direct me ,
View 5 Replies View RelatedI'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
[Code]...
how to properly install Suse Linux 11 64 bit on my laptop (with AMD Turion x2 x64). Currently I have Windows XP Professional x64 as operating system and I will prepare a new partition for the Linux installation. Should I take care of something before/during the installation, or it will install itself and will setup automaticaly the dual-boot configuration? I am also thinking of installing BackTrack Linux for dual boot with xp x64, would there be some differencies by the installation?
View 4 Replies View RelatedGnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
View 2 Replies View RelatedI've been running a Suse 11.2 and ubuntu 9.04 on an internal HDD in separate partitions for about 6 months on an Acer aspire with 756 meg ram. I installed Suse first then Ubuntu as I couldn't work out how to alter the partitions and keep Ubuntu when installing Suse first. Yesterday when I tried to boot Suse I got the message Error 15 no file found. I went into boot edit for and Suse this is what I found.
Root (HD0.0)
Kernel /boot/vmlinuz-2.6.31.5-0.1-default root=/dev/disk/by-id/ata-s
nitrd /boot/initro.2.6.31.5-0.1-default
Id like to be able to fix this so I don't lose either OS as I use them both for different things and until I learn all about Suse and can make a live cd of OS, I really love it but am not prepared to dump ubuntu. I've put a lot of time into both and don't want to start again. I've got a Suse studio account and really want to create my own dedicated Video/audio KDE Suse. I'm new to dealing with grub and the terminal other than cut and paste, so may be a bit dim until I can understand them.
I dual booted opensuse along with vista. I installed opensuse in extended partition, with grub and gave the option as "boot from extended partition". Now everything is fine. I am able to boot into suse as well as vista. Now how can I restore my vista bootloader? I want to uninstall openSuse. When I try restore mbr from hard disk. There is absolutely no change!
View 1 Replies View RelatedI am trying to Install Open Suse 11.3 (burned as an ISO DVD) along with existing Win 2008 R2 OS. When I try to boot from the DVD it just logs in to Win2008 though boot from CD/DVD is enabled in the boot sequence. So i tried to mount the ISO and run from Windows ! BUT I get an error before installation starts telling that Win2008 R2 is not supported in open suse installer! Is there anything I can do to overcome this and install/retain both OS? In fact I am even trying to c hange my win2008 from R2 to Enterprise to see if I can overcome the problem!
View 9 Replies View RelatedOK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is
mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx
please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks
Everything was working fine with dual boot sda/osuse 11.2 and sdb/kubuntu. Decided to install new 11.3. Lost dual boot, can now only boot to 11.3, sort expected that. I see the root and home partitions in Dolphin but can't mount or open them? Would like to access the files copy to Osuse. Rite clik get me "error permission denied" I can reinstall Kubunt and it will set up my boot loader correctly with grub2, but is their a better quicker way? Why does Osuse still use the legacy grub?
View 5 Replies View RelatedI intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has
ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8
[code]...
I tried to use different version of Python, and followed the Readme like this
./configure
make
make test
[code]...
I installed open SUSE to dual boot with XP and have an interesting problem. When my computer rebooted to complete the SUSE install, it would not work at all. I rebooted and the GRUB came up with operating system choices, but when I chose one, absolutely nothing would happen. I tried to reinstall SUSE and nothing happened. I rebooted with the XP cd and nothing happened. I then rebooted with a bood cd I have and it showed the hard drive but could not test it and said it was absent.
After freaking out, I shut the computer all the way off and started it up again. Now it works. It seems that I cannot reboot the system for it to work. I have to turn it all the way off before it will work at all.
Windows runs as well but was a bit shaky to start. I think it's ok now.
Anyone know why a reboot will not restart the system and I have to shut it all the way down? Soft boot, hard boot, doesn't make any difference.
I am trying to install Suse 11 on my new laptop. The laptop has 250GB capacity. As I only use Linux for some scientific programming, I only needed to allocate about 20GB to Linux.
SDA1 is NTFS PQ Service 13.1 GB
SDA2 is NTFS Sys Reserved 101.9 GB
SDA 3 was the mainWindows user partition.
I shrunk this partition to 195GB using GPARTED.
I then tried to add 3 new Linux partitions to the unallocated disc space for usr home and a swap partition. GPARTED informed me that I would need to produce an extended partition to do this.
SDA4 became an extended partition 24.42GB
SDA5 EXT2 10.74 GB
SDA6 SWAP 1.46GB
SDA7 EXT2 11.21GB
When I started the SUSE install, all of the partitions were recognised correctly, but on the Grub details screen (Grub was allocated by SUSE to SDA4) I was warned that as this was beyond 128GB, my computer might not boot correctly. Is this likely to be the case, or do I need to alter something to get SUSE to install. The last thing i want with a new computer is a system that won't boot at all.
I Would like to dual boot my computer for it to have suse linux and windows xp professional I have an 80 GB hard drive partitioned in NTFS is it possible to dual boot and what software do you suggest to partition the hard drive.
View 1 Replies View RelatedThinking of putting sab alongside suze 11.3, I wonder if the bootloaders are compatible (versions of grub) or if only native systems (apart from windows/apple) are acceptable.
View 1 Replies View Relatedhow to remove the linux opensuse which are dual boot with window ?
View 1 Replies View Relatedasus K60IJ intel 4400 dual-core 4gb ram trying to setup suse 11.2 64bit as dual boot. works fine with win7 in dual boot and system boots great. been following forums to setup wireless. after doing all term commands, it see's both built in wireless (atheros ar9285) on the pci-e and the usb verizon broadband modem as (curitel brand modem). after checking kernal dmesg, it see's devices but looking at usr/sbin/iwconfig, it see's no eth0. checked at the asus website and see nothing on getting any kind of ethernet drivers.
View 7 Replies View RelatedIs there a way to pull up my windows password file while on my suse 10.3 operating system so that I can reset it? I am not able to log on to my windows partition. Either I misspelled the password when entering it or it has become corrupted.
View 4 Replies View RelatedI am useing open suse 11.2 dual boot with windows server 2008. Could anybody give some suggestion do I need to upgrade to open suse 11.3. And How I can deal with that and keep my windows.
View 5 Replies View RelatedWe are very new to linux.would you plz give me the installation procedure of ns2 in open suse..I have tried some procedure found in linux forums.The following problems arises
1.yum command not found in step 1.
2.on skipping step 1 ,i tried step 2 where on ./install command it gives.
I actually have a Suse running on a partitioned harddisk of 27GB but I prefer Fedore anyway. I would like to install Linus Fedora on my computer to make a dual boot system (Vista and Linus) by overwriting the previous Suse. My question is
Will I be in OS booting trouble (i.e unable to resurect the previous boot screens, windows might possibly be deleted, or not be present in the boot options) if this is done ?
Also, because I have only one disk (the first disk of Fedora 11 downloaded), will it be fine with just one first disk ? (there are several to download but I think I assume I am not going to use all of them during installation, right ?)
When I click download DVD 4.7 GB, on any browser (I tried in Firefox, Opera and Chrome) It started to download 4.3 GB instead of 4.7- The first Download was 4.2 GB and I though that was wright, but the checksum didn't match. Now It started download only 4.3 GB Why is that? How can I solve this ?
View 9 Replies View RelatedI installed Ubuntu 10.10 Maverick Meerkat onto my Asus Eeepc 1215n notebook. I previously had Windows 7 installed, and still do, but it wont boot anymore due to the error stated below.
Everything was working ok;
Grub 2 is installed and shows
Code:
Both win7 and ubuntu were dual booting fine. Then I was intrigued by the windows vista, so clicked to load vista, and it came up with the "recover, backup, exit" options, so I exited. Next time I tried to open win7 I receive this error:
Code:
windows failed to start. A recent hardware or software change might be the cause. To fix problem:
1. insert our windows installation disc and restart your computer
2. choose your language settings and click "next"
3. click "repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: NSTAutoNeoGrub0.mbr
Status: 0xc000000f
Info: The selected entry could not be loaded because the application is missing or corrupt.
I'm not at home at the moment, so cant back up my whole c: drive, so I don't really want to use the recover option from the vista partition.
Also Ive tried using this recovery CD, but I do not have a CD drive, and using unetbootin and universalUSB installer both just show the option of "default" with a 10second countdown when trying to boot the recovery CD from usb.
I had dual boot system with XP as the primary partition. XP became corrupted and I reformatted and made a clean install of this partition which has removed the grub loader for Ub on second partition. Is there any way to get back to Ubuntu without deleting this partition and reloading it from my live disc?
View 2 Replies View Relatedis their a wubi like installer so i can try open suse without partitions?
View 5 Replies View RelatedI have tried liveCD, but open suse is running so slowly. Will it be faster when I install it?
View 8 Replies View Relatedcan someone explain to me in which platform should we install the open suse iso image.. n how to do snort inside it.. i'm dying to know..
View 2 Replies View RelatedTrying to install on a: Dell Precision T3500 OpenSuse 11.3 keeps showing the following message:
"Make sure CD number 1 is in your drive"
I ordered the DVD from the OpenSuse site, so they ARE NOT burned copies. I also tried burning images, the same problem happens. No matter what I do, it does not go beyond this message.
My question to the community is should I preform a fresh install of OpenSuSe 11.2 or upgrade my current version of OpenSuSe 11.1? As of current I just use my system to surf the web check, email and Basic Business needs. The specs of my Laptop are:
OS Information
OS: Linux 2.6.25.20-0.4-default i686
Current user: jraglin@Jada
System: openSUSE 11.1 (i586)
KDE: 3.5.9 "release 49.1"
[Code]...
