Is there a way to pull up my windows password file while on my suse 10.3 operating system so that I can reset it? I am not able to log on to my windows partition. Either I misspelled the password when entering it or it has become corrupted.
View 4 RepliesI actually have a Suse running on a partitioned harddisk of 27GB but I prefer Fedore anyway. I would like to install Linus Fedora on my computer to make a dual boot system (Vista and Linus) by overwriting the previous Suse. My question is
Will I be in OS booting trouble (i.e unable to resurect the previous boot screens, windows might possibly be deleted, or not be present in the boot options) if this is done ?
Also, because I have only one disk (the first disk of Fedora 11 downloaded), will it be fine with just one first disk ? (there are several to download but I think I assume I am not going to use all of them during installation, right ?)
I dual booted opensuse along with vista. I installed opensuse in extended partition, with grub and gave the option as "boot from extended partition". Now everything is fine. I am able to boot into suse as well as vista. Now how can I restore my vista bootloader? I want to uninstall openSuse. When I try restore mbr from hard disk. There is absolutely no change!
View 1 Replies View RelatedI have upgraded to ubuntu 10.04 but now can't boot into win vista, ubuntu and vista are on grub but vista will not load, I have tried sudo upgrade-grub which seemed to work but had no effect on loading windows. I did think of using win dvd to fixmbr but only as last resort, I entered the commands suggested by nitstorm and got "command not found". Followed link to source forge.net and test disk, followed the instructions to install and run test disk which repaired the boot sector in the vista partition, I can now choose to boot into win or ubuntu.
View 6 Replies View RelatedI want to set up grub for a dual boot system of xp and vista. The thing is that I have vista installed and would have to install it ance again after setting up XP in order to use the microsoft bootloader. And secondly I slowly want to get into linux...
This is how I tried it: I have four partitions on my HD and want to install the Bootloader on /dev/sda3. I started up the ubuntu live cd, mounted partition3, opened the console and tried this command line which I found in a tutorial
grub-install --root-directory=/media/hda3 --recheck /dev/hda However I get the following error message:
mkdir: cannot create directory '/media/hda3/boot': No such file or directory
How to uninstall ubuntu 10.10 from windows vista dual boot system?
View 3 Replies View RelatedI have just downloaded Ubuntu 11.04 and am trying to install it on a dual boot system with Windows Vista. I get as far as "Allocate drive space" but there are no partitions to choose from. I currently have Windows and Linux Mint on the hard drive and want to install Ubuntu in the same partition as Mint to overwrite it.
View 9 Replies View RelatedI have a single hard-drive on a spare computer and I decided to try out Ubuntu on recommendation from a friend. I really like it now but at first I just dual-booted it, and now I want Vista gone. I know it's unnecessary to have just one OS but my hard-drive isn't particularly big and I'd prefer to have Ubuntu by itself. Can anyone tell me how to eliminate vista and leave Ubuntu as my sole operating system (I've all my files from computer on another computer so I don't have to worry about losing anything).
View 2 Replies View RelatedGnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
View 2 Replies View RelatedI have an HP Compaq nx6235 Notebook, which was happily running Windows Vista Home Premium, until I finally got around to loading Linux openSUSE 11.1 from a DVD issued with a magazine last year. I now have a problem, because my Windows Vista has been wrapped up in the Linux partitioning system. I know it is located at dev/sda1 and that it is an HPFS/NTFS filetype, create a dual boot drive on my notebook, so that I can happily play with both systems. I am newbie, so the instructions should be as clear and simple as possible.
View 9 Replies View RelatedHave just installed 9.10, again, many failed attempts previously.Cannot get to boot up and show menu on dual boot with Vista initially,However when I delete the grubenv file the system boots ok and works fine.But does not show the grub menu to choose boot up choices.Got the information to delete the file on some posts elsewhere about booting problem, and tried a longshot and got into Ubuntu for the first time from trying to install now for 3 months!The problem is the file grubenv is created each time so on subsequent boot ups the sytem fails to boot again.The Grub version is 1.97 beta 4, most up to date for Karmic I think, I have seen a version 1.98 but dont think its for Karmic?
Is there a way to modify the grub.cfg file to stop this problem ( all posts say dont touch this file??Or install a script to delete the grubenv file on shutdown as a workaround for me, (I have no idea how to do this whatsoever, I'm not familiar with linux at all)I did read that this problem was fixed/patched in Grub version 2, but dosn't seem.so on my system afetr I updated it when I got into Ubuntu.I couldnt find the patch or fix, I got the information I am on about from this post:URL...It seems to say it was fixed or patched by Colin Watson reading through, but I don't really understand whats being said or how to get the patch on my system if indeed there is one?Sorry for being a bit thick about all this, its a bit beyond my brain now, hope somebody can help out as I have enjoyed my brief bit of fun in Ubuntu.
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
[Code]...
I recently booted into linux from 9.10 and upgraded to 10.04. i was running a vista dual boot with 9.10 and everything worked fine. When linux asked where to install grub it said "if you dont know check all partitions "or something.so i did. i tried to boot back into windows and now it wont work, all i get is a blinking cursor.
View 9 Replies View RelatedI have recently installed Ubuntu 10.04 on a Compaq Presario V3000.
To prepare the install, I freed about 15 GB of space, booted from an USB. I chose "use largest continous free space" when it got to that point and then proceeded with the rest.
Now when I choose vista it will not load properly, here's what happens:
1.Windows says loading windows files.
2.After a while, I have to choose a language.
3.Windows looks for operating systems to repair.
If I choose not to, it will take me to a menu where I can choose to fix boot problems, command line, etc...
Linux is running very well, vista is the problem here, I have a recovery disk*, but I wanted to ask you guys if that is the correct move. I really need to keep windows to run some windows only apps.
*This disk was burnt on another computer, an HP from a friend who has the same vista edition. Will this work? This computer's burner is broken..
This is actually something for my gf, she has an account on my computer(only ubuntu on it) and uses it often (Mendley, Zotero, and sciency things in general). She loved it and asked me to install a dual boot with her win system. She use SPSS for whatever kind of statistical analysis it does and she likes ms office better then open office, and I would like to leave her with the choice....
I deleted 2 ubuntu partitions using Vista's manager, and expanded the unallocated space in to the Vista partition. when I restarted a screen came up saying error: no such partition grub rescue> Is there any way I can fix this ( by deleting grub, or something...)
View 3 Replies View RelatedOn installing a dual boot XP/OS 11.2 on a 40GB HDD, I had no problems with the partitioning, but now I have installed XP (15GB) and Vista (20GB), the OS 11.2 setup insists on shrinking the Vista partition to 15GB and does not allow me to change this.Have tried going into 'Create Partition Setup' and 'Custom Partition Setup' but can't seem to get Vista back to its original size
View 1 Replies View RelatedI'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.
View 9 Replies View RelatedA friend's Fujitsu Siemens Esprimo laptop was running Vista [slowly] from a 120Gig HD set up with 'him' and 'her' user-id's. I got him to try loading Ubuntu 10.10 from a LiveCD but when taking the 'install' command there was no option to install alongside Vista. I saw in the forum that you should use a Vista utility [after a de-frag] to shrink the Vista partition. We did this and freed up 40+ Gig. During the next LIveCD load we opted to use 'advanced' for partitioning and made a 35 Gig [/ Ext 4] and a 5 Gig [Swap] before completing the installation without any errors. Ubuntu now loads from the 1st grub entry but the sis graphics card limits resolution to 800 x 600 [I'll look into this further later]. Enties 5 and 6 on grub are for Vista and Vista Recovery options. Entry 5 goes through a few screens but will not load properly and loops back on itself. Entry 6 loads Vista o.k. but at a point where only one of the two users ['his'] is visible but it does run o.k.
Question 1: Is there something I can do to get the 5th grub entry working properly so that Vista loads as normal and displays the two user-id icons ? Question 2: As there seems to be a lot of issues with Ubuntu on this particular laptop would you advise running another distro like Mandriva or Mint that I've read may handle the sis graphics better ? Question 3: If we did install one of the above distros over the Ubuntu image on the 35 Gig partition would that have a good chance of creating a grub where Vista and Mandriva [or Mint] ran happily together.
I have a PC with two 40 Gb hard drives. Vista is currently installed on drive 0. Nothing is installed on drive 1. If I switch cables to the drives, Vista will be installed on drive 1. Nothing will be installed on drive 0. If I then install Fedora 10 on drive 0, will it automatically detect Vista on drive 1 and allow me the option of using Grub or something else to boot it? I want to avoid having Vista overwrite my MBR, but I don't want to piss my wife off because she can't access windows for two weeks while I figure out how to customize Grub or install something else. If I need to customize Grub, (or some other boot loader), I would need step by step instructions. Is there a book or online tutorial?
View 4 Replies View RelatedBeen trying this by the guess and error method for days.I know about the "Swerdna" post but it is way to difficult for me.I do this every other output from Microsoft, so it is very difficult to rememberwhat transpired. Bedsides it changes with each new distro.I'm tempted to use the VM program that Dedoimodo recommended but I don't knowhow it handles Email and urls. If they are permanent or not.
Setup:
HD1 - Vista - sda
HD2 - Opensuse 11.2 - No boot to MBR - sdb
[code]....
I'm trying to get a dual boot set up for vista and 9.10
I already have 3 logical partitions
Code:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x48000000
[Code]....
If I were to install windows vista shrink the partition to fit only the OS and dual boot Ubuntu over it would I be able to use windows programs on the Ubuntu install.
In a sense I am wondering if I can use Ubuntu as my primary OS and use my Windows Utilities through Ubuntu on the Ubuntu partition?
If not would it be possible to install them on the windows partition and launch them through Ubuntu?
I'm using Lucid and trying to dual-boot into Vista.
All I see when I select Vista in the GRUB loader is in the .png image I have attached to this post.
Very confusing....I can get to Vista by inserting the install disk, but then it overwrites (I believe) the GRUB loader.
Also:
Is there any way to reinstall GRUB from the Lucid installation disk without installing another Lucid OS??
I have a laptop running windows vista already and I need to run Red Hat 7.2/7.3 or Fedora Core 1 on there as well. I am in the process of downloading Red Hat 7.3. I haven't done this before so I'm wondering if there are any guides out there that detail how to set this up to dual boot? Is Red Hat 7.3 a better option over Fedora Core 1?
View 2 Replies View RelatedI recently recieved Ubuntu 9.04 Desktop Edition CD-ROM through snail-mail after requesting a copy online and I want to install it on my laptop, although I wish to keep Vista which is on it now.
My laptop has a 250GB hard drive. Although when in Vista this is represented as two separate drives each of 110GB, (C or ACER and (D or DATA.
Using the CD, I start the installation and everything is straightforward and self explanatory, until I get stuck at step 4...
Where I am told by the ubuntu installer: "This computer has several operating systems on it." (I'm confused now, I thought it had one, Vista.)
Beneath I am shown a bar representing my disk space which is divided between...
I am given the option to use the entire disk: 'SCSI1 (0,0,0)(sda) - 250.1GB ATA WDC WD2500BEVT - 2', (and from the mention of 250BG in the name I'm assuming this is one disk and not the two separate drives named C: & D: in Vista.) ...along with a warning - "This will delete Windows Vista (loader), Windows Vista (loader), Microsoft Windows XP Embedded and install Ubuntu 9.04". (The aforementioned "several operating systems" obviously.)
But I wish to keep Vista, so I select the option to "specify partitions manually" and am brought to a screen named 'Prepare Partitions', where there is a table somewhat like this:
I am then given the option for "New partition table", and if I select any of the bottom four devices I can 'edit partition' or 'delete partition'.
Selecting the device /dev/sda3 (because it is the one that I'm guessing has no operating system data on it, judging by the previous screen) and choosing 'edit partition', allows me the following options...to create a new partition size, to select what I want to use the partition as. (There are also two options for formating a partition, which is a checkbox, and Mount point. These are both greyed out.)
When I look at the 'Use as:' option, within 'edit partition', the drop down box allows me to use the partition in the following ways:
- do not use the partition
- swap area
- NTFS
- FAT 32 file system
- FAT16 file system
- XFS journaling file system
- ReiserFS journaling file system
- Ext2 file system
- Ext4 journaling file system
- Ext3 journaling file system
Before today, a 4GB RAM 64 bit laptop with single 320GB HDD, Vista x64 primary NTFS partition of 60GB for C Drive, then Ubuntu 9.10 64bit on primary ext3 partition of 25GB, no swap partition but swap file I added, then what was an extended NTFS partition that contained the Vista D drive with all my app data, documents and media on 4 or 5 logical partitions. I boot into GRUB and choose Vista or U9.10, U9.10 by default, and access the NTFS D:drive to share media, documents,config profiles for Firefox and ThunderBird, etc.
The Ubuntu install came from my first try at 8.04, and has been upgraded to 9.10, so it's okay but not great. For example, suspend and hibernate are screwed up because there's no swap partition, I believe, and I would like a more optimal fresh installation of U10.04 without again upgrading it over top of 9.10/9.04/8.10/8.04... Today, I repartitioned the D Drive Data extended and logical partitions into one smaller 100GB NTFS primary partition, so its Vista C Drive, U9.10, then D Drive and then unallocated space. I attach an image of GParted to show it. The partitions aren't optimal but it works for now.
Install U10.04 or U10.10 clean into a new partition on the unallocated space. I thought if I used an Extended partition
can only have one?) with Logical partitions for the OS, my personal data, a swap partition, etc. that I could get a fresh install of the new Ubuntu and still have a working dual boot until I was happy and then either do a tripleboot and keep Vista and the 2 linux, wipe out the U9.10 partition and merge it into the Vista D Drive for data and shared data with the remaining Ubuntu 10.x.
Q1 - Should I create a ext4 extended partition in unallocated space and set up logical partitions for /root, /home, /swap and any other recommended?
Q2- Will the U10.x installer do that for me?
Q3 - Can I keep my working GRUB 1.5 with working Vista and Ubuntu 9.10, just add in the new U10.10 install until I get it set up right, and then move the GRUB or whatever boot loader to the new U10.10 intall as default?
I have an identical problem on two separate computers. The first is an acer aspire 5735z set up to dual-boot to either ubuntu 10.10 or windows vista. The second is an asus eee-pc 900hd set up to dual-boot to either ubuntu 10.10 or windows xp. This problem has consistently happened with both computers since original setup of dual-boot. Neither computer had this problem when windows was the only OS. This problem occurs at approximately 50% of boot attempts. Here's my description of the problem: when booting (turning on or restarting) the HDD and fan spin for a few seconds, the computer makes a 'click' noise, then the computer turns off. There is a blank screen the whole time. Once off, the computer will try again and again, in a loop, but never successfully boot.
My temporary solution: i unplug the ac, take out the battery and hold down the power button for one or two minutes. the computer will turn on and display my dual-boot menu. i've read about similar problems, and some were resolved by 'flashing the bios', which I gather is some sort of bios update. I've never done this before, but it sounds like something that could easily mess up my computers in a bad way.
One of the screens in the installer( middle of screen) will show what systems are on the grub menu, and one will be marked the default.
If the vista is not there (usually indicated by other), then click the add and select the correct boot partition (sda for vista) and change it's label to Windows Vista.
If other is there, click the edit button and change other to Windows Vista.
Finally, click the check box for the one you want to be the default boot. (you can always change that in the grub.conf later.)
I have Windows Vista Home Premium and I don't want to switch entirely to Fedora because I'm not as familiar with it as I am Windows. I mainly wanted to install Fedora for my Linux class at the Community College I attend. How do I install it with a dual boot so it doesn't take over Windows Vista? I had that happen once and it was a mess to fix and reinstall Windows Vista too.
View 7 Replies View RelatedI have installed the Fedora on my laptop with Vista installed first. Now I am using the OS separately fine. I just choose which Os to boot in to every time I turn the machine on. However, I now need to do certain task that I need to switch between two OS. Wonder how to switch to Vista when I am using Fedora without rebooting? and vice versa.
View 6 Replies View Related