Thinking of putting sab alongside suze 11.3, I wonder if the bootloaders are compatible (versions of grub) or if only native systems (apart from windows/apple) are acceptable.
View 1 RepliesI Would like to dual boot my computer for it to have suse linux and windows xp professional I have an 80 GB hard drive partitioned in NTFS is it possible to dual boot and what software do you suggest to partition the hard drive.
View 1 Replies View RelatedI'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
[Code]...
I installed Sabayon Linux and it's bootloader, but I did not like it. How do I remove it and its bootloader so only Ubuntus remains?
View 1 Replies View RelatedI installed open SUSE to dual boot with XP and have an interesting problem. When my computer rebooted to complete the SUSE install, it would not work at all. I rebooted and the GRUB came up with operating system choices, but when I chose one, absolutely nothing would happen. I tried to reinstall SUSE and nothing happened. I rebooted with the XP cd and nothing happened. I then rebooted with a bood cd I have and it showed the hard drive but could not test it and said it was absent.
After freaking out, I shut the computer all the way off and started it up again. Now it works. It seems that I cannot reboot the system for it to work. I have to turn it all the way off before it will work at all.
Windows runs as well but was a bit shaky to start. I think it's ok now.
Anyone know why a reboot will not restart the system and I have to shut it all the way down? Soft boot, hard boot, doesn't make any difference.
There is no prompt for choosing whether I boot windows or Linux it just takes me to Linux. I need to install and load some things from windows and can't figure it out.
View 1 Replies View RelatedI am trying to install Suse 11 on my new laptop. The laptop has 250GB capacity. As I only use Linux for some scientific programming, I only needed to allocate about 20GB to Linux.
SDA1 is NTFS PQ Service 13.1 GB
SDA2 is NTFS Sys Reserved 101.9 GB
SDA 3 was the mainWindows user partition.
I shrunk this partition to 195GB using GPARTED.
I then tried to add 3 new Linux partitions to the unallocated disc space for usr home and a swap partition. GPARTED informed me that I would need to produce an extended partition to do this.
SDA4 became an extended partition 24.42GB
SDA5 EXT2 10.74 GB
SDA6 SWAP 1.46GB
SDA7 EXT2 11.21GB
When I started the SUSE install, all of the partitions were recognised correctly, but on the Grub details screen (Grub was allocated by SUSE to SDA4) I was warned that as this was beyond 128GB, my computer might not boot correctly. Is this likely to be the case, or do I need to alter something to get SUSE to install. The last thing i want with a new computer is a system that won't boot at all.
how to remove the linux opensuse which are dual boot with window ?
View 1 Replies View Relatedhow to properly install Suse Linux 11 64 bit on my laptop (with AMD Turion x2 x64). Currently I have Windows XP Professional x64 as operating system and I will prepare a new partition for the Linux installation. Should I take care of something before/during the installation, or it will install itself and will setup automaticaly the dual-boot configuration? I am also thinking of installing BackTrack Linux for dual boot with xp x64, would there be some differencies by the installation?
View 4 Replies View RelatedI've been running a Suse 11.2 and ubuntu 9.04 on an internal HDD in separate partitions for about 6 months on an Acer aspire with 756 meg ram. I installed Suse first then Ubuntu as I couldn't work out how to alter the partitions and keep Ubuntu when installing Suse first. Yesterday when I tried to boot Suse I got the message Error 15 no file found. I went into boot edit for and Suse this is what I found.
Root (HD0.0)
Kernel /boot/vmlinuz-2.6.31.5-0.1-default root=/dev/disk/by-id/ata-s
nitrd /boot/initro.2.6.31.5-0.1-default
Id like to be able to fix this so I don't lose either OS as I use them both for different things and until I learn all about Suse and can make a live cd of OS, I really love it but am not prepared to dump ubuntu. I've put a lot of time into both and don't want to start again. I've got a Suse studio account and really want to create my own dedicated Video/audio KDE Suse. I'm new to dealing with grub and the terminal other than cut and paste, so may be a bit dim until I can understand them.
can someone direct me how to install Ubuntu as a dual boot on my open suse 11.2 I could not find any installing instructions. if someone could give me a link or direct me ,
View 5 Replies View Relatedasus K60IJ intel 4400 dual-core 4gb ram trying to setup suse 11.2 64bit as dual boot. works fine with win7 in dual boot and system boots great. been following forums to setup wireless. after doing all term commands, it see's both built in wireless (atheros ar9285) on the pci-e and the usb verizon broadband modem as (curitel brand modem). after checking kernal dmesg, it see's devices but looking at usr/sbin/iwconfig, it see's no eth0. checked at the asus website and see nothing on getting any kind of ethernet drivers.
View 7 Replies View RelatedIs there a way to pull up my windows password file while on my suse 10.3 operating system so that I can reset it? I am not able to log on to my windows partition. Either I misspelled the password when entering it or it has become corrupted.
View 4 Replies View RelatedI am useing open suse 11.2 dual boot with windows server 2008. Could anybody give some suggestion do I need to upgrade to open suse 11.3. And How I can deal with that and keep my windows.
View 5 Replies View RelatedI dual booted opensuse along with vista. I installed opensuse in extended partition, with grub and gave the option as "boot from extended partition". Now everything is fine. I am able to boot into suse as well as vista. Now how can I restore my vista bootloader? I want to uninstall openSuse. When I try restore mbr from hard disk. There is absolutely no change!
View 1 Replies View RelatedI actually have a Suse running on a partitioned harddisk of 27GB but I prefer Fedore anyway. I would like to install Linus Fedora on my computer to make a dual boot system (Vista and Linus) by overwriting the previous Suse. My question is
Will I be in OS booting trouble (i.e unable to resurect the previous boot screens, windows might possibly be deleted, or not be present in the boot options) if this is done ?
Also, because I have only one disk (the first disk of Fedora 11 downloaded), will it be fine with just one first disk ? (there are several to download but I think I assume I am not going to use all of them during installation, right ?)
I'm in the process of trying Sabayon 5.2. After the initial install, I had 800 packages to install to upgrade - went very smooth - but on re-booting, the auto login was gone. No problem, I reset using 'run command' 'kdm' and the 'convenience' screen. Checked all the correct places, and re-booted - no auto login, and I can't get it to 'stick'?
View 2 Replies View RelatedI'm trying to get OpenSuse 11.2 to dual boot with windows 7. I have "/home" on a separate partition formated in NTFS so that I can share it with windows 7. However when i try to boot OpenSuse, I can't seem to login. It comes up with "kstartupconfig error 3". I can only login to my account through consol login. I can login graphically as root though. I'm thinking it's something to with NTFS and permissions as when I view the permissions of my home folder it comes up as owner=root & group=user, I cant seem to change the owner back to me though I can't change any of the permission settings for that. The reason I think it NTFS causing the trouble is because the root directory is on an ext4 partition and root logs in fine.
Also I cant seem to boot Windows 7 either even though it shows up on the grub menu. so i cant check the partition from there either. but thats not my main concern I want to at least get OpenSuse working properly then I work on getting win7 to boot.
Gnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
View 2 Replies View RelatedOK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is
mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx
please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks
The problem is this: I have a 320gb HDD splitted in 4 partitions. When I first installed Windows XP I formatted the HDD in 3 (Windows system partition, Media partition and another one I left for Linux). However Linux requires another partition for swap. Everything was just fine. One day Windows stopped working and I tried re-installing it. After the system was ready to start, Windows failed to boot with "NTLDR is missing" message. I tried to recover the Master boot record, even replaced NTLDR manually - nothing worked. I read that in order a HDD to be partitioned in more than 3 parts the so called "extended" partitions must be created. I think this may cause the problem but I don't want to wipe out everything (I have more than 100 GB of books most of which are not available anymore in the same locations I have downloaded them)
View 1 Replies View RelatedHow do i install jdk on sabayon?
View 2 Replies View RelatedI have Suse Ent 10 SP3 that when I reboot the server sometimes it won't... it behaves like this
up and running If I rebooted boots ok so up and running again and If I rebooted again it won't from Hadr Drives
What I can check on my boot/grub?
why sometimes boots OK and sometimes does not
but the way I was thinking it was the HBA attached but I removed them
I cannot boot into the Windows 7 partition, which I guess is /dev/sda1. I have Slackware installed on /dev/sda2 which boots fine, my /etc/lilo.conf looks like
Code:
/etc/# Start LILO global section compact
[code]....
I am working on another's Dell Inspiron 530 with Vista 64-bit; see below:
[code]....
wanting a dual-boot, 500GB hdd was formatted as above, Win Vista x64 Recovery CD was created, and antiX-M11 (as Swift Linux 0_1_1) installed. Now, at startup, machine boots to antiX and not Vista. User wants it the other way around. I think I should have reordered the partitions and not installed GRUB in MBR. EasyBCD is the preferred boot loader for User. This is a learning experience but due to time constraints and not being at my home where references are available, EasyBCD is on a USB stick -- should I boot to the Vista Recovery CD and then try to install EasyBCD to sda3 from it, uninstall antiX (but this will not fix the MBR problem, will it?), or edit fstab or what
I have a PC with three HD's. My primary hard drive has a single partition and contains Win XP SP3. I have a second hard drive which I use to store junk (pictures, movies, etc). The third, 60GB HD, I just put into my PC and I wanted to install Fedora 11 onto it. I want to have a dual boot system with WinXP being the default boot. I downloaded the latest build of Fedora 11, created a LiveCD out of it and I tried to install the OS onto this third new hard drive. I installed the OS, I told it to use the entire third HD and to have a dual boot setup and make the WinXP OS be the default boot. The installation seemed to go without any problems. However, after restarting the PC, the PC stops booting right after the DELL screen. It gives me a cursor and that's it. It just sits there. I have tried redoing the install about 4 different times now and no matter how I change the different installation options, I get the same result. Now I can't even boot into XP even after I disconnect the third drive. I am guessing that the dual boot got screwed up; I just don't know how to fix it and more importantly, how to install Fedora, dual boot.
View 15 Replies View RelatedDoes anyone know of a good web page creator that is easy to install on Sabayon 5.3?? I'm new to Linux and web page creating, so be gentle! I have registered a web address and a host, now all I have to do is get the info to the world.
View 3 Replies View RelatedHow do setup github on sabayon. And i try to connect to git git@github.com i get ths error. PTY allocation request failed on channel 0
View 2 Replies View RelatedI initially had Red Hat 5 on my pc on my primary 40 hard drive, then i added a second hard drive as a secondary master and went on to install suse on it, now when suse boots it doesn't even give me the option to boot red hat, i did not touch any of the partitions on the red hat hard drive during the suse installation. Is there hope ???
View 3 Replies View RelatedOld Boot drive in new PC (XPPRO + Ubutnu) Run the XP repair BUT still have Error 21, used XP repair console to repair MBR still have problems.
View 1 Replies View Related