SUSE :: Dual Boot 11.2 And XP?
Jan 6, 2010
I installed open SUSE to dual boot with XP and have an interesting problem. When my computer rebooted to complete the SUSE install, it would not work at all. I rebooted and the GRUB came up with operating system choices, but when I chose one, absolutely nothing would happen. I tried to reinstall SUSE and nothing happened. I rebooted with the XP cd and nothing happened. I then rebooted with a bood cd I have and it showed the hard drive but could not test it and said it was absent.
After freaking out, I shut the computer all the way off and started it up again. Now it works. It seems that I cannot reboot the system for it to work. I have to turn it all the way off before it will work at all.
Windows runs as well but was a bit shaky to start. I think it's ok now.
Anyone know why a reboot will not restart the system and I have to shut it all the way down? Soft boot, hard boot, doesn't make any difference.
View 9 Replies
ADVERTISEMENT
May 26, 2011
I'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
[Code]...
View 4 Replies
View Related
Jan 13, 2010
There is no prompt for choosing whether I boot windows or Linux it just takes me to Linux. I need to install and load some things from windows and can't figure it out.
View 1 Replies
View Related
Sep 5, 2010
I am trying to install Suse 11 on my new laptop. The laptop has 250GB capacity. As I only use Linux for some scientific programming, I only needed to allocate about 20GB to Linux.
SDA1 is NTFS PQ Service 13.1 GB
SDA2 is NTFS Sys Reserved 101.9 GB
SDA 3 was the mainWindows user partition.
I shrunk this partition to 195GB using GPARTED.
I then tried to add 3 new Linux partitions to the unallocated disc space for usr home and a swap partition. GPARTED informed me that I would need to produce an extended partition to do this.
SDA4 became an extended partition 24.42GB
SDA5 EXT2 10.74 GB
SDA6 SWAP 1.46GB
SDA7 EXT2 11.21GB
When I started the SUSE install, all of the partitions were recognised correctly, but on the Grub details screen (Grub was allocated by SUSE to SDA4) I was warned that as this was beyond 128GB, my computer might not boot correctly. Is this likely to be the case, or do I need to alter something to get SUSE to install. The last thing i want with a new computer is a system that won't boot at all.
View 1 Replies
View Related
Feb 7, 2011
I Would like to dual boot my computer for it to have suse linux and windows xp professional I have an 80 GB hard drive partitioned in NTFS is it possible to dual boot and what software do you suggest to partition the hard drive.
View 1 Replies
View Related
May 29, 2011
Thinking of putting sab alongside suze 11.3, I wonder if the bootloaders are compatible (versions of grub) or if only native systems (apart from windows/apple) are acceptable.
View 1 Replies
View Related
Feb 8, 2011
how to remove the linux opensuse which are dual boot with window ?
View 1 Replies
View Related
Mar 11, 2010
how to properly install Suse Linux 11 64 bit on my laptop (with AMD Turion x2 x64). Currently I have Windows XP Professional x64 as operating system and I will prepare a new partition for the Linux installation. Should I take care of something before/during the installation, or it will install itself and will setup automaticaly the dual-boot configuration? I am also thinking of installing BackTrack Linux for dual boot with xp x64, would there be some differencies by the installation?
View 4 Replies
View Related
Jan 11, 2010
I've been running a Suse 11.2 and ubuntu 9.04 on an internal HDD in separate partitions for about 6 months on an Acer aspire with 756 meg ram. I installed Suse first then Ubuntu as I couldn't work out how to alter the partitions and keep Ubuntu when installing Suse first. Yesterday when I tried to boot Suse I got the message Error 15 no file found. I went into boot edit for and Suse this is what I found.
Root (HD0.0)
Kernel /boot/vmlinuz-2.6.31.5-0.1-default root=/dev/disk/by-id/ata-s
nitrd /boot/initro.2.6.31.5-0.1-default
Id like to be able to fix this so I don't lose either OS as I use them both for different things and until I learn all about Suse and can make a live cd of OS, I really love it but am not prepared to dump ubuntu. I've put a lot of time into both and don't want to start again. I've got a Suse studio account and really want to create my own dedicated Video/audio KDE Suse. I'm new to dealing with grub and the terminal other than cut and paste, so may be a bit dim until I can understand them.
View 9 Replies
View Related
Jan 25, 2011
can someone direct me how to install Ubuntu as a dual boot on my open suse 11.2 I could not find any installing instructions. if someone could give me a link or direct me ,
View 5 Replies
View Related
Jun 24, 2010
asus K60IJ intel 4400 dual-core 4gb ram trying to setup suse 11.2 64bit as dual boot. works fine with win7 in dual boot and system boots great. been following forums to setup wireless. after doing all term commands, it see's both built in wireless (atheros ar9285) on the pci-e and the usb verizon broadband modem as (curitel brand modem). after checking kernal dmesg, it see's devices but looking at usr/sbin/iwconfig, it see's no eth0. checked at the asus website and see nothing on getting any kind of ethernet drivers.
View 7 Replies
View Related
Aug 27, 2010
Is there a way to pull up my windows password file while on my suse 10.3 operating system so that I can reset it? I am not able to log on to my windows partition. Either I misspelled the password when entering it or it has become corrupted.
View 4 Replies
View Related
Aug 3, 2010
I am useing open suse 11.2 dual boot with windows server 2008. Could anybody give some suggestion do I need to upgrade to open suse 11.3. And How I can deal with that and keep my windows.
View 5 Replies
View Related
Dec 12, 2009
I dual booted opensuse along with vista. I installed opensuse in extended partition, with grub and gave the option as "boot from extended partition". Now everything is fine. I am able to boot into suse as well as vista. Now how can I restore my vista bootloader? I want to uninstall openSuse. When I try restore mbr from hard disk. There is absolutely no change!
View 1 Replies
View Related
Jun 26, 2009
I actually have a Suse running on a partitioned harddisk of 27GB but I prefer Fedore anyway. I would like to install Linus Fedora on my computer to make a dual boot system (Vista and Linus) by overwriting the previous Suse. My question is
Will I be in OS booting trouble (i.e unable to resurect the previous boot screens, windows might possibly be deleted, or not be present in the boot options) if this is done ?
Also, because I have only one disk (the first disk of Fedora 11 downloaded), will it be fine with just one first disk ? (there are several to download but I think I assume I am not going to use all of them during installation, right ?)
View 6 Replies
View Related
Aug 14, 2010
I'm trying to get OpenSuse 11.2 to dual boot with windows 7. I have "/home" on a separate partition formated in NTFS so that I can share it with windows 7. However when i try to boot OpenSuse, I can't seem to login. It comes up with "kstartupconfig error 3". I can only login to my account through consol login. I can login graphically as root though. I'm thinking it's something to with NTFS and permissions as when I view the permissions of my home folder it comes up as owner=root & group=user, I cant seem to change the owner back to me though I can't change any of the permission settings for that. The reason I think it NTFS causing the trouble is because the root directory is on an ext4 partition and root logs in fine.
Also I cant seem to boot Windows 7 either even though it shows up on the grub menu. so i cant check the partition from there either. but thats not my main concern I want to at least get OpenSuse working properly then I work on getting win7 to boot.
View 5 Replies
View Related
Oct 22, 2010
Gnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
View 2 Replies
View Related
Jul 5, 2009
OK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is
mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx
please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks
View 2 Replies
View Related
Nov 1, 2010
I'm trying to get dual monitor support enabled in Suse 11.3 Previously I had this in Suse 11.2 using a dedicated NVIDIA graphics card with VGA and DVI output and this was done in a GUI. I now have 11.3 and a built in ATI card with VGA and DVI output When I run xrandr I get the following Code: Screen 0: minimum 320 x 200, current 1440 x 900, maximum 8192 x 8192 VGA-0 connected 1440x900+0+0 (normal left inverted right x axis y axis) 408mm x 255mm
1440x900 59.9*+ 75.0
1280x1024 75.0 60.0
1280x960 60.0
1152x864 75.0
[code]....
I tried using xrandr --screen 1 but it says Code: Invalid screen number 1 (display has 1) I'm looking to expand the desktop onto the second screen so I can photo edit on one screen and web browse and instant message in the other screen Currently using the Radeon R600 classic driver from ATI
View 5 Replies
View Related
Oct 31, 2010
I have been tasked to set up 2 monitors on SUSE Linux Enterprise that are a clone of each other, but each displaying different resolutions. The primary display has a max resolution of 1024x768 while the secondary display has a max resolution of 800x600.
The problem comes when the secondary display shows a "cropped" version of the desktop. Is there anyway to show different resolutions on each display while maintaining the proper desktop look?
[Code]...
View 4 Replies
View Related
Dec 30, 2010
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code:
Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
View 2 Replies
View Related
Feb 3, 2010
I have XP on my IDE hard drive and Ubuntu on my USB hard drive (which is really an IDE drive with a USB adapter and external power souce). We've used Windows once in the past month, so we decided to jettison it. Two questions: 1. Can we simply delete all partiitions on the IDE hard drive and reformat or will this cause problems? 2 Is the write-speed gain worth switching the drives out, putting the Ubuntu drive in my IDE slot and my freshly wiped drive on the USB adapter?
View 3 Replies
View Related
Jun 5, 2010
I am quite experienced user of Ubuntu desktop / server distributions. Recently my desktop 9.10 disk failed and I decided to reinstall using 10.04. My configuration is a dual disk dual bot system. I have XP Pro SP3 on one disk and Ubuntu 10.04 on second. XP has own, untached MBR ubuntu got Grub 2 installed on the same disk as Ubuntu. Ubuntu disk is booting first in BIOS. Grub 2 detected both system, however I can boot only to Ubuntu. When I am trying to boot XP I got black screen only. Looks like booting is stack in BIOS stage, because crt+alt+del reset system.
I read Ubuntu forum, search Google and did not come with any solutions. My XP MBR is OK. I can boot directly, choosing XP HDD in BIOS as a starting disk. All entries in grub.cfg looks fine to me. I made 3 different clear installations of Ubuntu. Each with the same result. I reinstaled Grub2 with no effect. I wonder if this may be a hardware/Grub 2 compatibility issue. I am using quite old components.My motherboard is Assus P4C800 Delux. I have 5 HDDs 2 CD. Exactly the same configuration was OK with 9.10/XP dual disk dual boot using Grub legacy.
[Code]...
View 9 Replies
View Related
Aug 13, 2010
I currently have a dual boot on my 160gb hdd, but even that feels cramped. i was wondering...I have a spare 40gb harddrive compatible with my laptop. could I just install the windows 7 installation there?
assumably i'd swap in the appropriate windows 7 hdd whenever i'd want to load windows 7 at Grub.
what do you guys think?
View 4 Replies
View Related
Apr 27, 2010
Is it possible to use SuSE 11.2 with a dual monitor setup, one monitor being 16:9 running 1920x1200 and the other being 4:3 running 1600x1200? I'd like to know before I start buying the equipment.
View 2 Replies
View Related
Oct 6, 2010
I have two identical Samsung monitors. One is connected. to my motherboard VGA port (and appears as a Radeon HD 4200).The other is connected to a VGA port on a separate PCI Radeon 9200 PRO board. When I first installed Suse 11.3, I had to go through the nomodeset boot command (otherwise my system froze up on boot) and I only get video on the screen connected to the motherboard. The other monitor light. flashes which means it's not seeing a video signal. And, I do not have an xorg.conf file in /etc/X11.
So I did the following:
I did an Xorg -config which created an xorg.conf.new file which looked sensible in that it showed both Radeons, and appeared to set up a dual-head system. The only change I made was to change the driver for both controllers from radeon to radeonhd. Then, I copied xorg.conf.new to /etc/X11/xorg.conf and rebooted. And, nothing is changed. I still need to do nomodeset on boot and I still only get video on the screen connected to the motherboard. I'd attach the xorg.conf and Xorg.0.log files, but it says I can't add attachments to this post. I don't see any major errors in the Xorg.0.log file, but a lot of it is greek to me.
View 5 Replies
View Related
Jan 1, 2010
I have activated dual screen monitors using the Nvidia driver GUI as Sax2 would not correctly configure it. Now at every boot I get the message "undefined video mode 31a, press [enter] for a list of video modes or [space] to continue. After pressing space the system boots to my liking, how can I get rid of the message at every boot up?
I am using Suse 11.2 and KDE4.3.1 My video card is an Nvidia Geforce 7100 GS I thought I was using the Nvidia drivers as I have a GUI from Nvidia in my launch menu if I search "Nvidia" and I have completed the one-click installation. Although when I go into "My Computer" it says driver unknown.
View 8 Replies
View Related
May 17, 2009
I currently have XP installed on a NetBook (Samsung NC10), and would like to run Fedora on it. I'm currently looking at putting Fedora onto a flash memory card to test it works OK on the hardware, before installing it to the hard disk. The problem I've got is that the boot sector is occupied by WDE software (TrueCrypt). Will this pose a problem for dual-booting XP with Fedora, or will GRUB move the boot loader in the usual way?
View 2 Replies
View Related
Jan 18, 2010
Have just installed 9.10, again, many failed attempts previously.Cannot get to boot up and show menu on dual boot with Vista initially,However when I delete the grubenv file the system boots ok and works fine.But does not show the grub menu to choose boot up choices.Got the information to delete the file on some posts elsewhere about booting problem, and tried a longshot and got into Ubuntu for the first time from trying to install now for 3 months!The problem is the file grubenv is created each time so on subsequent boot ups the sytem fails to boot again.The Grub version is 1.97 beta 4, most up to date for Karmic I think, I have seen a version 1.98 but dont think its for Karmic?
Is there a way to modify the grub.cfg file to stop this problem ( all posts say dont touch this file??Or install a script to delete the grubenv file on shutdown as a workaround for me, (I have no idea how to do this whatsoever, I'm not familiar with linux at all)I did read that this problem was fixed/patched in Grub version 2, but dosn't seem.so on my system afetr I updated it when I got into Ubuntu.I couldnt find the patch or fix, I got the information I am on about from this post:URL...It seems to say it was fixed or patched by Colin Watson reading through, but I don't really understand whats being said or how to get the patch on my system if indeed there is one?Sorry for being a bit thick about all this, its a bit beyond my brain now, hope somebody can help out as I have enjoyed my brief bit of fun in Ubuntu.
View 9 Replies
View Related
Jul 8, 2010
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
View 1 Replies
View Related
