Hardware :: Computer Stop With Pci Wireless Card?
Sep 29, 2010
I have a SMCWPCI-G2 pci card wireless And, both in Ubuntu and Windows,at any time, suddenly, the computer stop, blocked completely, and i cannot do nothing. When the card is out, i have no problem. But today, in the Bios, I've found two options about pci: the first one is "PCI Latency Timer" which value is set to "32", and BIOS allows to change32,64,96,128,160,192,224 and 248. Maybe the "32" value isn't correct, isn't it?? What do you think about? if I change value "32" to other value, Can i solve the problem? I haven't made the change because i am prudent (if I cause an error in the MotherBoard or similar).The second option is "PCI IDE BusMaster" which is set to "Enabled"
View 1 Replies
ADVERTISEMENT
Dec 5, 2010
seems to be working but the card is scrolling through channels while trying to attack a certain channel! how do i stop it?
View 1 Replies
View Related
Apr 4, 2010
I have a Belkin Wireless G F5D7230-4. I was attempting to configure a wireless card on another computer on my network when it froze during the reboot phase after making settings adjustments. The wired connection is fine, except on that computer that I was making the adjustments from. It won't connect at all. I plugged a friends netbook into the same wired line and it connected. Also there is no wireless signal on any laptops. Mac, Win Linux, don't matter. I tried all the various methods of resetting to default but still when I try to access the router's config page @ http://192.168.2.1 I get the error Code: The server at 192.168.2.1 is taking too long to respond.
[Code]...
View 2 Replies
View Related
Jun 6, 2010
The first two times I entered the wireless key on the prompt that appeared shortly after login, the computer froze completely. ctr-alt-f1 ctr-alt-backspace did nothing. The third time, I closed the first prompt and after 10 minutes I tried connecting again. It didn't freeze, at first. The internet worked. It took about 10 minutes later for it to freeze. Now, whenever I boot up, it freezes a few seconds after login. I can boot recovery mode, but I don't know what to do from there. Heres some info I got from the recovery mode:
Computer Brand: Sony PCV RX850
Ubuntu 10.4 32 bit 2.6.32-21-generic i686
Realtec 8185L chipset
iwconfig
[code]....
View 3 Replies
View Related
Apr 7, 2011
there are two computer
wireless internet accessible notebook.
desktop with no wireless card (but just normal lan card).
I connect two computer with lan cable, and I want to use internet in desktop computer through the notebook's wireless lan
what kind of setting do I have to do?
desktop's OS is Ubuntu, and notebook's one are Ubuntu, Windows XP.
View 1 Replies
View Related
Aug 16, 2011
How do I stop gvfs-afc-volume from running on my computer? What exactly is it?
My system:
CPU: AMD Sempron(tm) Processor 3100+
RAM: 1.4 GiB
Linux 2.6.34.10-0.2-default i686
openSUSE 11.3 (i586)
(KDE 4.4.4
View 1 Replies
View Related
Feb 12, 2010
Two weeks ago my computer started freezing on start up when plugged in. It was suggested to upgrade the APM. What is this and is it not updated through the package update? If not how do I upgrade it?
View 1 Replies
View Related
Mar 31, 2011
How can I setup a lan connection using wireless pci card on entire system D-link DWA-510 card I have .
View 5 Replies
View Related
May 15, 2009
My digital card stop Centos 5.2 from start , when i remove it feom my compyetr it start , how i can install it ans stop centos from recognize it (ignore it ) i have winxp for it
View 1 Replies
View Related
Jan 8, 2011
im trying to install ubuntu 10.10 on my notebook but it stop on the section of entering my name, computer name, user name, password... and at the bottom section it says... ready when you are...
View 2 Replies
View Related
Aug 21, 2010
I'm running Ubuntu 10.04 Server. I can't get my Wireless Card & Wired Card to work at the same time. My interfaces file is incorrect, when I comment out 1 of the interfaces the other works. I have attached my interfaces file.
View 2 Replies
View Related
Dec 4, 2010
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
View 6 Replies
View Related
Jun 14, 2010
I am having trouble with my home network, from one computer to another both using wireless g (Ubuntu 10.04) what transfer rate should I expect/hope for when copying a file from one computer to another? My speed is consistently 220 KBps am I correct in assuming this is pretty bad?
View 1 Replies
View Related
Jan 24, 2010
I have a netbook (MSI Wind U100 rebrand) that has one of those card readers built into the handrest. The thing is I've never used it once, and it keeps popping up in powertop as waking the cpu when it should just shut up and be quiet.Aside from breaking open the case and tearing it out, the immediate solution is to browse to /sys/bus/usb/devices/usb1/1-6/ and pipe 1 to the file remove. That disables it until system reboot or resume, at which point I have to do it all over again.
Code:
$ echo 1 | sudo tee /sys/bus/usb/devices/usb1/1-6/remove
Now I'd like to create an udev rule to make it not get initialized at all. A quick Google search found me this article on creating udev rules, and after toying about with the udevadm tool I managed to produce the attributes/properties of the device.
Code:
zorael@lethe:/sys/bus/usb/devices/usb1/1-6$ udevadm info -a -p $(pwd)
Udevadm info starts with the device specified by the devpath and then walks up the chain of parent devices. It prints for every device found, all possible attributes in the udev rules key format. A rule to match, can be composed by the attributes of the device and the attributes from one single parent device.
looking at device '/bus/usb/devices/usb1/1-6':
KERNEL=="1-6"
SUBSYSTEM=="usb"
DRIVER=="usb"
ATTR{configuration}=="CARD READER
[code].....
View 2 Replies
View Related
Oct 5, 2010
I'm not sure where to post this but seeing as how, at least as far as I can tell, the problem is related to the wireless card or drivers, I figure this is as good a place as any. On to the problem, I recently install openSUSE 11.2 Gnome on my MSI Wind U100 netbook. Everything appeared to work fine right after install, wireless and everything. However, soon after that I began having issues where the screen would freeze and I would be unable to do anything until I force restarted the computer.
Now I believe the problem is related to my wireless as this problem occurs most frequently when I am either downloading a lot of data over wifi or fiddling with the network. I have had it freeze many times while switching wireless networks or while experiencing wireless issues such as an intermittent connection. I may be completely wrong in my above analysis of the problem, but I figured i need to post somewhere to get started. If anyone feels this post may get more help in another forum, please just let me know.
View 1 Replies
View Related
May 7, 2009
HP Pavilion Media Center a1430n Desktop PC
Athlon 64 X2 (T) 3800+ 2.0 GHz
Asus A8N-LA chipset GeForce 6150 LE
1 gB of RAM
Video Graphics: integrated
Hipro hp-d3057f3r max out put 300w
Here is the problem fist i had a 8800gt installed it work fine until one time the card stop displaying on my screen and the card would make a fan sound like if was over heated......but my integrated still displays... ok then i send the card to my provider so it can be replace.. so they send me a 8800gts .... and i installed and deleted the old drives and even upgrade my bios .... but still happen like it happen whit the 8800gt it wont display any thing on my screen and also is making the same fan sound of the 8800gt ....
View 5 Replies
View Related
Mar 16, 2009
I have a Dell inspiron 1420 and its set up as a dual boot. Windows/Fedora.I cant get the wireless card to work. I review some previous posts but still cant get it working.
I did a /sbin/lspci
Network controller: Broadcom Corporation BCM4310 USB Controller (rev 01)
I did $rpm -q b43-fwcutter
b43-fwcutter-011-3.fc9.i386
View 14 Replies
View Related
Aug 12, 2010
I have a Acer Revo R3610 nettop on which I installed oS11.3. It has an Atheros AR5001 wireless network adaptor.I'm getting very bad latency and throughput on with this card. In comparison my Thinkpad with Intel card achieves at least 10 times the throughput from the same location. Also when I boot my wifi will come up authenticate and then a few seconds later disconnect and reconnect. I've tried updating the kernel to 2.6.35 as one of the fixes was to improve the performance of the ath5k driver. I'm using wpa2 authentication.
Here are some details:
Code:
mediacentre:~ # /sbin/lspci -nnk
00:00.0 Host bridge [0600]: nVidia Corporation MCP79 Host Bridge [10de:0a82] (rev b1)
Subsystem: Acer Incorporated [ALI] Device [1025:0222]
[code]....
Is there anything else I paste that will help determine the cause of the bad throughput. Browsing the web or copying files across the network is bordering unusable.
View 9 Replies
View Related
Mar 30, 2010
I have a dell 1521 and I can't get internet working, I thing the driver is no working with ubuntu 9.10
View 1 Replies
View Related
Dec 31, 2010
I have lenovo thinkpad, T61 with Intel 4965AGN wireless card. It is a N card, it works under N mode in windwos, but not in Ubuntu (10.10). I installed ndiswrapper and got the windows xp drivers for this card. the issue is that i got an error when installing the drivers and since then I cannot use wireless.
The error i got is: Code: Module could not be loaded. Error was: FATAL: Could not read '/lib/modules/2.6.35-24-generic/kernel/ubuntu/ndiswrapper/ndiswrapper.ko': No such file or director I unistalled the driver, but now under network connections no wireless connections appear, nothing. I cannot use wirless anymore.
View 9 Replies
View Related
Jul 14, 2010
I just got myself a Dell Inspiron 1440. And decided to install my favorite distro Debian. I got the installation to go with no issue and all seems to be working fine. However the wireless isn't working. NetworkManager doesnt even detect a wireless card. I followed the instructions here and installed the b43-fwcutter and then issued the modprobe b43 and modprobe b43legacy commands. Then I issued the iwconfig command and this was the output.
[Code].....
Also, I've been doing some research and found out about some file located /etc/udev/rules.d/70-persistent-net.rules. So I looked in mine and found out that only my eth0 is added.
[Code].....
View 1 Replies
View Related
Aug 17, 2010
i have the cd just do not know how to install the driver for my linksys wireless pci card 14e4:4329the device is BCM43XG
View 4 Replies
View Related
Oct 27, 2010
1 ) make and model of wireless device Athreos 5k
2 ) driver version in use dont know
3 ) any error message. -
abhishek:/ # sudo /usr/sbin/iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
4 ) what you have tried to rectify the problem.
Tried to install all the patches.
5 ) any trouble-shooting guide you have tried to follow. - The previous two stickies
6 ) openSUSE version 11.3
7 ) type /sbin/lspci -v" in a terminal; copy and paste the section that identifies your wireless card and it's chipset. 07:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 137a
Flags: bus master, fast devsel, latency 0, IRQ 23
Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
[code]....
View 9 Replies
View Related
Feb 2, 2011
I have searched and have not found anything specific to my issue. I am currently using NDISWrapper to load the bcmwl15 driver and when it's active it works beautifully.Problem is sometimes at boot, the card doesn't "turn on" and I don't know how else to describe it. The OS does not even detect that the hardware is present. I have disabled wireless hotkey in BIOS. The only way to make the wireless card "active" is to reboot with the wiredconnection to the router. After doing that the wireless card "wakes up" and works awesome.Is there anything I can do to make sure the driver load at boot?mes I get the error that NDISWrapper is not modprobbed when I go to network configuration and if I wish to do i now? I don't know if that has anything to do with the boot sequence. Using the <modprobe ndiswrapper> command as root does nothing permanant
View 9 Replies
View Related
May 3, 2011
when it comes to openSUSE but I am earnestly trying. I installed the openSUSE OS on my HP dv6000 laptop, but it does not seem to recognize my wireless card (which is a Broadcom 4311).
View 7 Replies
View Related
May 5, 2011
wlan0 Authentication capabilities :
WPA
WPA2
CIPHER-TKIP
CIPHER-CCMP
Those are my authentication capabilities, obviously. I am using a WEP encryption for my wireless router and according to this, it will not allow me to connect. Is there anyway to allow that? The wireless card works just fine in Windows, even on the same network encryption type. Using a Intel Wireless/Pro 4965 ag. Note* this is my mother's router and whatnot. She won't change it the encryption type.
View 2 Replies
View Related
Jun 17, 2011
The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
View 9 Replies
View Related
Apr 25, 2010
What would work better with my att internet i have a Option Wireless ICON 322 Unlocked Wireless 3G Internet Card - GPRS/EDGE, USB, Lanyard (AT&T Branded)Or Zoom 4596 3G USB Tri-band Modem for AT&T - Wireless cellular modem - external - Hi-Speed USB - GSM, GPRS, UMTS, EDGE, HSDPA, HSUPA - How would i set tis up with ubuntu 9.10 or 10.04?
View 1 Replies
View Related
Sep 11, 2011
Debian 2.6.32-5-amd64 KDE I have to make one of my computers wireless. i need some product recommendations for a wireless access point & a wireless network card.
View 4 Replies
View Related
Dec 25, 2009
My wireless device is an integrated Dell Wireless 1397 WLAN Mini-Card, I am unsure about the driver I have in use. I am sure I have a driver installed because the configuration screen shows my network. I currently have the computer plugged into my network via CAT 5 but I would like to be able to use the wireless (obviously.) I am using Open SuSE version 11.2 and I have run the updater. I could not see my wireless network before running the updater and I can now so I know that the updates have helped but I am again stuck. I have tried to search the wireless forum and I have tried to tinker with the settings in YaST , but nothing seems to be working. Reading the Welcome page of the wireless forum, I tried the Broadcom chip-set advice:
[Code]...
I have read and taken to heart the advice given for receiving help and if any more is needed I will gladly give it. I have a small amount of experience with SuSE Enterprise edition so I can understand some technical stuff but I am best at following specific instructions.
View 7 Replies
View Related
