My digital card stop Centos 5.2 from start , when i remove it feom my compyetr it start , how i can install it ans stop centos from recognize it (ignore it ) i have winxp for it
View 1 RepliesI have startup scriptsI want to test themI need a script to do the followingstart restart stop for 100 times (or i can set how many cycle)
View 1 Replies View Relatedi've made a big update of almost 300Mb.I'had a working DNS server.Now, when i boot the box, named works and it resolves all the clients.If i make any change (enter a new client for example) and of course i restart named (service named restart), named stop but does not start again !!!In order to get a working named, i 'm obliged to reboot the box?
View 6 Replies View RelatedI am trying to give access to ONE single user to start and shutdown tomcat server. The problem being, when I enter syntax: username ALL= /etc/init.d/tomcat5, /usr/local/tomcat/webapps, PASSWD:ALL This gives the user access to start and stop tomcat but also gives user access to start and stop other services within /etc/init.d - such as httpd etc... What is the proper way to give user access to start and stop service, and limiting that power to only one service....
View 2 Replies View RelatedI have a problem when a try start my wireless card broadcon 4303, i receive this message.
SIOCSIFFLAGS - no such directory
I use centos 5.2
kernel 2.6.18
I have a tv tuner card thats a couple years old, well since they are phasing out the old analog cable channels with digital ones, my card is not picking them up anymore. Is there any way to get the digital ones without buying a new card?
View 2 Replies View RelatedI have 3 script BASH. I want start this script when the system start,stop and reeboot.
View 4 Replies View RelatedI'm trying to start/stop Informix along with my linux os start/stop. For this I've made a test script in order to test this but I'm facing a problem. The service is starting along with the system but when I'm stopping (rebooting) the system it doesn't run the "K10test" script.
After sistem reboot you can see that the /etc/init.d/test stop is not executed.
I have a SMCWPCI-G2 pci card wireless And, both in Ubuntu and Windows,at any time, suddenly, the computer stop, blocked completely, and i cannot do nothing. When the card is out, i have no problem. But today, in the Bios, I've found two options about pci: the first one is "PCI Latency Timer" which value is set to "32", and BIOS allows to change32,64,96,128,160,192,224 and 248. Maybe the "32" value isn't correct, isn't it?? What do you think about? if I change value "32" to other value, Can i solve the problem? I haven't made the change because i am prudent (if I cause an error in the MotherBoard or similar).The second option is "PCI IDE BusMaster" which is set to "Enabled"
View 1 Replies View RelatedI set Kmail to launch on start up but now no longer wish for it to do so. However, i cannot find the setting i changed in the first place.
View 4 Replies View RelatedWhen copying files to USB drives, the file progress bar moves it 'bursts', sometimes doing nothing for long periods, then moving forward quickly and stopping again.It's almost like it is showing the transfer to the cache, not the transfer to the actual drive.
View 5 Replies View RelatedHost - ubuntu 9.10 64bit
Virtualizer - KVM
I need to stop KVM starting at boot. I added following 2 lines at the bottom of /etc/modprobe.d/blacklist.conf
Code: blacklist kvm
blacklist kvm-amd Reboot PC
It doesn't work.
$ lsmod | grep kvm Code: kvm_amd 41556 0
kvm 190648 1 kvm_amd
What further command I have to run in order to activate the new blacklist.conf ?
I'm running Debian 8.4 on a Lenovo W500 laptop and I recently upgraded from kernel version 3.2.0-4 to 3.16.0-4. Since then I encounter issues with lightdm (I suppose) which manifest themselves in two different scenarios:
1) scenario 1: lightdm fails to start.Instead of showing the graphical login screen, the system boots into terminal. Lightdm seems to be running, but I can't enter the X-Session (Alt+Ctrl+F7 doesn't work), nor can I restart the lightdm via
Code: Select all# service lightdm stop
# service lightdm start
dmesg shows the following (I've only pasted the end of dmesg):
Code: Select all[ 240.100071] INFO: task kworker/0:2:39 blocked for more than 120 seconds.
[ 240.106512] Not tainted 3.16.0-4-amd64 #1
[ 240.112956] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 240.119494] kworker/0:2 D ffff880155155a48 0 39 2 0x00000000
[code].....
and /var/log/lightdm/lightdm.log shows errors of type
Code: Select allGtk-CRITICAL: gtk_container_foreach: assertion 'GTK_IS_CONTAINER (container)' failed
when I then try to shutdown via
Code: Select all# shutdown -h now
the OS gets stuck on a message of the form
Code: Select allirq 17: nobody cared
and eventually I have to force a shutdown by holding the poweroff button.scenario 2: lightdm starts, but can't be stopped/In this case I can login and use the system as usual, but when I try to shutdown either via # shutdown -h now, or via the GUI or the power button, the system gets stuck and I have to force a shutdown by holding the poweroff button.It seems that people had similar issues on other distros (see e.g.: URL... but there doesn't seem to be a good fix so far. I can for now solve the issue by downgrading the kernel to 3.2.0-4, but I was wondering if there is a permanent fix.
I am trying to make a web server with debian 6 and i want a xfce dsektop when i need to open files,extract,navigate but to be able to turn it off when i dont need it (to save ressources).I already installed it with aptitude install xorg and aptitude install xfce.
View 4 Replies View RelatedFedora 12 64bit KVM
How to stop KVM start at booting?
Then how to start it after booting?
i am using putty to connect to my server and wanted to restart mysql server. searched the internet and found thatcommand is /etc/init.d/mysqld start or stopbut it did not worked.then tried /etc/init.d/mysql stop or startthis also did not worked.
View 6 Replies View RelatedI thought it was in the System>administration menu somewhere, but I just can't see it. What is it called, and where do I find it please?
View 9 Replies View RelatedI use a centos VPS with 1gb memory and enough space and brandwidth (if this info is off any use). What I want to achieve is that I can start and quit a process that is running in a screen, with using a script.
Like start.sh that does "screen serverapp1"
and stop.sh that does "kill serverapp1"
I already tried something like that, but it didn't work. The kill command only works with process ID's and that one is variable.
Sometimes I use vnc server and start desktop. The memory use rises about 2gb during this. I need to be able to turn off the xwindows after I shutdown vnc without rebooting. Is there a way to do this?. And I don't need to know how to disable at boot thats not what I need to do.
View 5 Replies View RelatedI have several services set to start in init 3 on a cloud provider. The init scripts appear to be in the correct folder but the services are never started after a reboot. I finally watched the console and all the services start correctly then shutdown after a few moments.
View 9 Replies View RelatedHow to start or stop telnet service in red hat Linux 5
View 2 Replies View Relatedi installed linux ubuntu 10.04 successfully.it only works for a few minutes then the mouse and the keyboard start to stop working, they completely freeze then i have to restart the computer.
View 1 Replies View RelatedI would like to start and stop rtorrent based on my screensaver. I used to do this awhile ago with ubuntu and still have my script. However now I am using Fedora with KDE and the script no longer seems to work.
#!/usr/bin/perl
#gnome
my $cmd = "dbus-monitor --session "type='signal',interface='org.gnome.ScreenSaver',member='SessionIdleChanged'"";
open (IN, "$cmd |");
while (<IN>) {
if (m/^s+boolean true/) {
#when screensaver activates, run the following commands
#system("/home/eric/compiled/scripts/rtorrentstart");
system("touch /home/asoukenka/rtorrenthasstarted");
} elsif (m/^s+boolean false/) {
#when screensaver deactivates, run the following commands
#system("kill `pgrep rtorrent`");
system("touch /home/asoukenka/rtorrenthasbeenkilled"); } }
Old Post [URL].
I have installed squid 2.7 in my red hat Linux box.I need some guidance regarding to start and stop squid service. Normally when squid configuration file is n /etc/squid/squid.conf and we want to start the service we use # service squid startand to stop the service we use# service squid stopNow squid is inCode:# /usr/local/squid/etc/squid.confhere the default # service squid start and # service squid stop does not work.
View 6 Replies View RelatedThis should not be this difficult. I have a plain install of Ubuntu 10.04 64 bit with a wired network card. It picks up a private IP address from my router. It has an app called NetworkManager Applet 0.8 in the notification area of the panel. If I right click on this app and select "Disconnect" it does. ifconfig shows that the IP address is gone. I can then right click on the app again and "Auto eht0 and I am connected again and ifconfig shows the IP address restored. So far, so good. I was testing a crossover cable to see how fast I could transfer files to/from my server - both machines have gigabit cards but my switch is only 100 Mb.
I unplugged the PC from the router, hooked up the crossover cable to the server and found that I had no connectivity - the IP address was gone. Not wanting to mess with hard configuring IP addresses for the moment I connected the PC back to the router. When I unplugged the cable the app showed the networking disconnected icon. I tried right clicking on the app and unchecking [ ] Enable Networking then rechecking it. This works on my netbook running Ubuntu 9.04. No luck on 10.04 (and I had not tried the Auto eht0 as described above - did not discover that until later). So then I tried to fix it from the command line.
ken@taylor12:~$ sudo /etc/init.d/networking start
Rather than invoking init scripts through /etc/init.d, use the service(8)
utility, e.g. service networking start
Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the start(8) utility, e.g.
start networking
networking stop/waiting.
So I then tried
ken@taylor12:~$ sudo service networking start
networking stop/waiting
but still no connectivity. A reboot got things back in order.
Then I did a little more testing.
ken@taylor12:~$ sudo /etc/init.d/networking stop
* Deconfiguring network interfaces...
Ignoring unknown interface eth0=eth0.
and I am still connected.
Editing Connections within the NetworkManager Applet shows "Auto eth0 - last used never" even though I have used it. [Edit] Auto eth0 via the app appears to show information about my wired NIC.
ifconfig shows eht0 as active
ken@taylor12:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:25:64:e8:18:2c
inet addr:192.168.0.112 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::225:64ff:fee8:182c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2234 errors:0 dropped:0 overruns:0 frame:0
TX packets:2407 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
bytes:1824427 (1.8 MB) TX bytes:404086 (404.0 KB)
Interrupt:17
What I want to achieve is that I can start and quit a process that is running in a screen, with using a script.
Like start.sh that does "screen serverapp1 ./serverapp1"
and stop.sh that does "kill serverapp1"
I already tried something like that, but it didnt work. The kill command only works with process ID's and that one is variable.
EDIT:
What I've tried (because google is my friend):
[servercod4001@datacenter-196 ~]$ screen -ls
There is a screen on:
11343.servercod4001 (Detached)
1 Socket in /var/run/screen/S-servercod4001.
[Code]....
Im running ubuntu 10.04 lts. Ive been struggling with automating a screensaver to come on and off at shceduled times. all is working fine except I cannot seem to get xscreensaver to start from cron. when i run it manually i need to use:
xscreensaver & and then hit enter. I'm not sure whats happening as i only get the line that it ran in my logs but no error. i am using xset to turn the display power on and off, then xscreensaver-command -activate and deactivate, after loading the xscreensaver daemon. everything automated works fine except starting xscreensaver daemon. if i run the same commands manually it works fine. if i leave the xscreensaver daemon running and shutoff display with xset it will come on again unless i kill xscreensaver. fyi what im trying to do: my linux file/web/music server is on a tablet netbook and i flipped the screen around and am trying to also use it as a digital picture frame. which works fine, i just dnt want to run it needlessly 24/7
Im using PHP and Sun Solaris to do something for Squid Proxy Server. im using......
- LAMP / SAMP
- Linux / Solaris 10
- Squid Server
- PHP
actually i need to know that someone knows about how to start/stop Squid Service using PHP code.
i finished installing oracle 11g r2 with EM but i cant find any good script that will close the database completely before rebooting they all start it correctly but for the shutdown they don't wait and the database restart in recovery mode
View 3 Replies View RelatedI've been trying to stop kdm the normal way, switching to a virtual terminal with ctrl+alt+f1 and using:
Code:
I've done it this way in other distro's and it's always worked.
How do I stop/start kdm from a virtual terminal in Suse ?