Ubuntu Networking :: Stop Wireless Card Channel Scrolling (aircrack)?
Dec 5, 2010seems to be working but the card is scrolling through channels while trying to attack a certain channel! how do i stop it?
View 1 Replies
ADVERTISEMENT
Ubuntu Networking :: Wireless Card Compatible With Aircrack?
May 4, 2010if i can find out whether my wireless card is compatible with aircrack, after running the lshw -C network command i received these results
*-network
description: Ethernet interface
product: RTL-8139/8139C/8139C+
vendor: Realtek Semiconductor Co., Ltd.
[Code].....
if my wireless card is compatible with aircrack.
Ubuntu Networking :: Aircrack Won't Find Wireless Card
Jul 15, 2010ive just installed the aircrack package in my dell vostro 1310 which i bought with its ordinary wireless card ( hell knows what it is. couldn't find..).At the very first time while trying to reach my wireless internet i was using backtrack 4 and i was not sucesfull.. that would be good normally, but it was not. because i couldnt do it cuz my wireless card wasnt being recognized by airmon..so i tought..i can use my wireless with ubuntu... then i got ubuntu again.. and intalled the aircrack.. as i run it i found ou t that still it wont find my wireless card...do i need any further config. to make it work with aircrack ??i can only find eth0, which is my wired network device....
View 1 Replies View RelatedUbuntu Networking :: Using Aircrack-ng [fixed Channel Mon1?
Feb 2, 2011I am trying to audit my wireless router due to someone in the neighbourhood hacking it, and have run into a few problems. When I run airodump-ng, everything works fine. However, when I try to get the .csv file and run "airodump-ng -w test --channel 6 --bssid ---------- mon1" (obviously with my the mac address of my AP instead of x's) I get this:
CH 6 ][ Elapsed: 4 s ][ 2011-02-02 17:48 ][ fixed channel mon1: -1 ] The problem is the [ fixed channel mon1: -1 ], because when I go to the next step to try to force a handshake, it says:
18:00:34 Waiting for beacon frame (BSSID:-----------) on channel -1
18:00:34 mon1 is on channel -1, but the AP uses channel 6
I have scoured the Internet for answers, and have seen several people with the same problem, but no solutions that work for me. I think it may have something to do with the driver. I really do apologise if this has been answered properly several times, but none of the solutions seem to be working in my case.
Ubuntu Networking :: Alfa AWUS036NH Card Not Working With Aircrack-ng
Jun 5, 2011Im running Ubuntu 11.04 with alfa awus036nh. I first tried to install drivers from alfa disc for RT3070. Everything seemed to be working but i got the imfamous mon0 channel -1 problem with aireplay-ng. Did some research-downloaded and tried different drivers rt2800 rtl 8170. Bottom line is i dont know what THE F*** im doing. I think i installed three different drivers. Now airodump doesnt show any output. Im going crazy. Is linux designed to make ppl go crazy. Windows is calling me to go back to it. THings shouldnt be this complicated. BTW im on a asus laptop with atheros ar 9285 card in it. a breif explanation of how drivers work in linux . Once again maybe im just putting the cart b4 the horse as im only about 2 weeks fresh into ubuntu.
View 1 Replies View RelatedUbuntu Networking :: Get Broadcom Card To Enter Monitor Mode With Aircrack-ng Suite
Jul 20, 2010I am running Lucid Lynx, kernel 2.6.32.23 generic, I have a card with the Broadcom BCM4311, with the STA Linux Wireless driver. I have no idea how to get monitor mode to work with the Aircrack-ng suite's Airmon-ng command. I use the command: sudo airmon-ng start eth1
And I get this output: Found 5 processes that could cause trouble. If airodump-ng, aireplay-ng or airtun-ng stops working after a short period of time, you may want to kill (some of) them!
PID Name
883 NetworkManager
893 avahi-daemon
896 avahi-daemon
931 wpa_supplicant
[Code].....
Ubuntu Networking :: 'wlan0 Is On Channel -1 But The AP Uses Channel 6' With Airplay-ng?
Jun 29, 2011I'm trying to crack my wep password just for kicks, but I keep running into the same error. When I try to use airplay-ng for the packet injection, it always gives me the error " wlan0 is on channel -1, but the AP uses channel 6". I've tried setting wlan0 to channel 6 manually, but that doesn't help. I spent a while searching for a solution, but it seemed like each page had a different, usually highly complex solution, that still doesn't work. I have the most recent drivers for my wireless card, and it meets all the requirements. So, is there any solution to this that will actually work?
View 9 Replies View RelatedHardware :: Computer Stop With Pci Wireless Card?
Sep 29, 2010I have a SMCWPCI-G2 pci card wireless And, both in Ubuntu and Windows,at any time, suddenly, the computer stop, blocked completely, and i cannot do nothing. When the card is out, i have no problem. But today, in the Bios, I've found two options about pci: the first one is "PCI Latency Timer" which value is set to "32", and BIOS allows to change32,64,96,128,160,192,224 and 248. Maybe the "32" value isn't correct, isn't it?? What do you think about? if I change value "32" to other value, Can i solve the problem? I haven't made the change because i am prudent (if I cause an error in the MotherBoard or similar).The second option is "PCI IDE BusMaster" which is set to "Enabled"
View 1 Replies View RelatedUbuntu :: TinyChat - How To Stop Space Bar Scrolling
Jul 3, 2010I use TinyChat a lot, and for whatever reason, the space-bar will scroll down the page and then I have to scroll up every time when I'm inside flash trying to type. Is there any way to completely disable the space scrolling so that I wont have to worry about it. I never used it to begin with, so it doesn't matter to me.
View 1 Replies View RelatedSoftware :: Screen Wont Stop Scrolling - Fedora 11
Oct 5, 2009FIRST thing i need to do is figure out why every webpage i open immediatly scrolls to the bottom. i can drag it up but it goes right back down. VERY frustrating . then i can be much more productive. just intalled Fedora 11(x86 64). no other OS. acer aspire desktop x1200. let me know what other info you need. if im not to dizzy ill try to provide it
View 7 Replies View RelatedGeneral :: Way To Stop Command Output To Continue Scrolling Down Terminal
Jan 4, 2011I moved from a Linux environment from one company to another and one annoying difference came out:When I used to run an application in a terminal (no GUI), the transcript lines were presented one the window - when the window was full then the scrolling of the lines would continue only if one hit the space bar to proceed (of course waiting to user input did not stop the run).
In the new environment the behavior is different - transcript lines keep going on and on so I need to scroll up - and moreover each page-up command is cancelled by the new lines appearing.perhaps this is also reproduce with other Linux commands , say "find" or "ls".
Hardware :: Strange Noise Coming From Laptop When Scrolling - Moving Windows / Stop It?
May 13, 2010I'm having a very faint but noticeable electric-like buzzing/grinding. It is not the hard drive but sounds very similar.
It occurs when i move scroll bars, or drag windows. It is highly replicable.
The only other time this has happens is when i install KDE which resulted in me reinstalling. Something id prefer to avoid. I haven't installed KDE this time, but this seems to have started immediately after replacing my fstab file which i accidentally deleted. That's the only thing i can think of.
Ubuntu Networking :: Can't Get My Wireless Card & Wired Card To Work At The Same Time
Aug 21, 2010I'm running Ubuntu 10.04 Server. I can't get my Wireless Card & Wired Card to work at the same time. My interfaces file is incorrect, when I comment out 1 of the interfaces the other works. I have attached my interfaces file.
View 2 Replies View RelatedOpenSUSE Wireless :: Installing Aircrack-ng In SUSE 11.3?
Aug 29, 2010I have tried to compile Aircrack -ng in Opensuse 11.2 I have received the following output
linux-z7wt:/home/jcaser/aircrack-ng-1.1 # make
make -C src all
make[1]: se ingresa al directorio `/home/jcaser/aircrack-ng-1.1/src'
make -C osdep
make[2]: se ingresa al directorio `/home/jcaser/aircrack-ng-1.1/src/osdep'
Building for Linux
[Code]...
Fedora Networking :: 14 Can't Connect To SpeedTouch 585 - Either Wireless Broadcom Card Or The Wired Ethernet Card
Dec 4, 2010Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
Ubuntu Networking :: Wireless Stop Working After A While?
Jan 15, 2011I just installed Ubuntu 10.10. Everything works fine, except wireless. Wireless works fine for a while (I am right now using it) but then it loses all networks and I have to shutdown and then start Ubuntu again to get wireless network again.
I have MSI laptop with Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
OpenSUSE Wireless :: Aircrack-NG Packet Injection For Intel3945 Does Not Work?
May 14, 2009I have the latest version of aircrack, and the latest compat-wireless package installed. When I try to inject I get this:
linux08:/usr/local/sbin # ./aireplay-ng -9 wlan0
16:46:33 Trying broadcast probe requests...
16:46:35 No Answer...
16:46:35 Found 0 APs
I know for a fact that there are 2 AP's. This worked perfectly with my old laptop with a D-link PCMCIA card.
[Code]...
General :: Set Sound Card Input Channel In KDE 4?
Nov 13, 2010There used to be a selector where you could set which microphone or line input should be used in KDE 3 (Kmix).
Now, in KDE 4 it is gone and I cannot figure out how to set it. i.e. to change from using an external mic to the internal mic.
Hardware :: Set Capture Card To Channel 3 At Start-up?
Apr 28, 2010I'm running VideoLan (VLC) under Ubuntu 9.1 (Karmic) (64-bit) with a Haupaugge-150 card. Right now when I want to get the TV feed in through the coax, I first have to run "ivtv-tune -c3" to set the channel for cable.
I've tried adding a line to the vlc.config but no joy. Googling found an answer for Fedora but it doesn't match the files I'm seeing in those directories for Ubuntu.
What I'd like would to have ivtv set the channel automatically at boot or start-up.
Ubuntu Networking :: Wireless Don't Work On Wireless 1390 WLAN Mini-card
Mar 30, 2010I have a dell 1521 and I can't get internet working, I thing the driver is no working with ubuntu 9.10
View 1 Replies View RelatedUbuntu Networking :: No Wireless After Installing Ndiswrapper T61 With Intel 4965AGN Wireless Card
Dec 31, 2010I have lenovo thinkpad, T61 with Intel 4965AGN wireless card. It is a N card, it works under N mode in windwos, but not in Ubuntu (10.10). I installed ndiswrapper and got the windows xp drivers for this card. the issue is that i got an error when installing the drivers and since then I cannot use wireless.
The error i got is: Code: Module could not be loaded. Error was: FATAL: Could not read '/lib/modules/2.6.35-24-generic/kernel/ubuntu/ndiswrapper/ndiswrapper.ko': No such file or director I unistalled the driver, but now under network connections no wireless connections appear, nothing. I cannot use wirless anymore.
Ubuntu Networking :: Wireless Card - WEP Encryption For Wireless Router Not Allow Me To Connect
May 5, 2011wlan0 Authentication capabilities :
WPA
WPA2
CIPHER-TKIP
CIPHER-CCMP
Those are my authentication capabilities, obviously. I am using a WEP encryption for my wireless router and according to this, it will not allow me to connect. Is there anyway to allow that? The wireless card works just fine in Windows, even on the same network encryption type. Using a Intel Wireless/Pro 4965 ag. Note* this is my mother's router and whatnot. She won't change it the encryption type.
Ubuntu Networking :: Wireless Card - No Longer To Connect To A Wireless Network
Jun 17, 2011The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
View 9 Replies View RelatedUbuntu Networking :: Stop & Restart Wireless Services
Apr 1, 2010Xubuntu 9.10 on a DELL Inspiron 1150.I have a problem with intermittent dropping of my wireless connection ( see Belkin 7010 thread).Once dropped, the wireless will NOT reconnect (It just sits there saying "connecting" but never does) Same happens if I manually disconnect - I can never re-connect. On rebooting it will reconnect fine & all is well for sometimes 4 hrs.How can I kill all wireless services & restart them without having to reboot the laptop?
View 3 Replies View RelatedUbuntu Networking :: Stop Wireless Starting At Startup
Apr 5, 2010Ubuntu 9.10
Acer 7736
This machine has a combined key/indicator light to turn the wireless networking on/off The change of state of the switch is detected by software with the switch off iwconfig shows
[Code]...
Ubuntu Networking :: Wireless Disconnects Ramdomly / Stop It To Do So?
Sep 19, 2010I know i posted this in general help, but the reason i got no answers was because it was the wrong spot. code...
View 2 Replies View RelatedUbuntu Networking :: Wireless Stop Working After Update 10.04?
Dec 17, 2010yesterday I let the update manager install a whole bunch of updates for my 10.04 install on my MSI Notebook ER710. My wireless was just working peachy until then (with the madwifi drivers), but after the update, no more... I checked the madwifi, tried a new make, but nothing worked.
So, after reading somewhere that 10.10 had less issues with wireless I decided to upgrade to 10.10 in the hope that that would solve my problem.
Well, partly it did, as in, according to my system I've got a wireless again and this morning even, it was able to see wireless networks! Unfortunately I couldn't connect to mine, although the key was correct. At some point I lost the ability to see wireless networks again. I tried wicd too, but no luck their either. It recognizes my card but can't see any networks.
here is all the info:
Machine Brand and Model (PC/Laptop): MSI ER710
lspci
Code:
02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
[Code].....
Ubuntu Networking :: Tenda W322P Wireless Card Crashing Wireless Router On Connect
Jun 30, 2011I installed a Tenda W322P wireless card in my dual-boot PC running both Windows XP and Ubuntu 11.04. The card worked straight out of the box on XP, but does not function correctly under Ubuntu. My apologies for any missing/irrelevant information, I am having to post this from the Windows boot so the Ubuntu settings are not directly available at the same time as internet access.I followed the process detailed here htURL...to install and configure the driver (I believe from reading other sites that this card is the Ralink RT3062 chipset), blacklisted the original RT2860 driver that was in use (couldn't even get the card to scan for wireless networks with the default driver) and restarted the interface.
Since then, sudo iwlist scan can find my wireless router but when I attempt to connect to it, it seems to enter a loop of requesting the WEP key then pausing for a while before re-requesting the key. I know I have the key value correct because it is copied and pasted from the same text file I used to copy and paste into the passkey field on the Windows boot. Attempting to connect to the router using Ubuntu also has the rather unfortunate side-effect of crashing the wireless router, killing off all other device connections until the router has been reset.
Software :: Get Mythtv To Find Channel 4 On Hauppauge 250 Pvr Card?
Nov 8, 2010I have an old Fisher VHS player with the old 'antenna' connection [one wire] to the TV. It does still work. I connect this to an old Hauppauge 250 pvr card in a box running Ubuntu 10-10.
I want to be able to put old tapes on my disk drive.
Working mainly with MythTv, I can not get it to work. The hardware seems to be working as I have options for tuner1 and other inputs. As channel 4 is no longer 'broadcast' I can't scan for it even with the VCR running.
Would someone please hold my hand an provide the necessary steps to get MythTv working or an alternative.
I have read the five similar threads and numerous other google hits but can't find what I need. Part of my problem is I am also new to Ubuntu and jumping in an out of terminal sessions is no where near what I grew up with in Slackware.
Ubuntu Networking :: Rename My Wireless Card From Eth1 To Wlan0 As Use Conkyrc And It Will Not Read Wireless Strength?
Aug 8, 2010have a dell Inspiron 1501 with ubuntu 10.0.4 I want to rename my wireless card from eth1 to wlan0 as I use conkyrc and it will not read my wireless strength or my ssid cuz it thinks it's a ethernet card and not wireless card. I know this for a fact because peppermint os my wireless card was wlan0 and it worked just fine.
View 1 Replies View Related