OpenSUSE Wireless :: Painfully Slow Wireless Throughput On Atheros AR5001 Card
Aug 12, 2010
I have a Acer Revo R3610 nettop on which I installed oS11.3. It has an Atheros AR5001 wireless network adaptor.I'm getting very bad latency and throughput on with this card. In comparison my Thinkpad with Intel card achieves at least 10 times the throughput from the same location. Also when I boot my wifi will come up authenticate and then a few seconds later disconnect and reconnect. I've tried updating the kernel to 2.6.35 as one of the fixes was to improve the performance of the ath5k driver. I'm using wpa2 authentication.
Here are some details:
Code:
mediacentre:~ # /sbin/lspci -nnk
00:00.0 Host bridge [0600]: nVidia Corporation MCP79 Host Bridge [10de:0a82] (rev b1)
Subsystem: Acer Incorporated [ALI] Device [1025:0222]
[code]....
Is there anything else I paste that will help determine the cause of the bad throughput. Browsing the web or copying files across the network is bordering unusable.
View 9 Replies
ADVERTISEMENT
Jan 12, 2011
A wifi card with the ath5k driver used to work properly until a couple of weeks ago. Now, if I ping the router the response times sometimes are okay but often fluctuate into the range of many hundreds or thousands of milliseconds. Occasionally the connection breaks down entirely.My laptop, which uses a different card, works fine (typical ping response times of 2 ms), so its probably not the router which is faulty.I use opensuse 11.3 x86_64, currently with the 2.6.34.7-0.7 desktop kernel and knetworkmanager
View 1 Replies
View Related
Aug 10, 2010
I have recently installed Ubuntu 10.04, and today the wireless connection has started to become spotty. The networks menu shows no wireless entries when they were there the day before. Again I have the Atheros AR5001 wireless card, my network is WPA2 and is 802.11g
View 1 Replies
View Related
Feb 12, 2011
I have an Atheros AR5007 802.11 b/g WiFi Adapter. I use OpenSuse 11.3, KDE desktop.When I did iwconfig, it displayed the following:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"sami"
[code]....
View 6 Replies
View Related
Nov 3, 2010
I'm facing problems with Fedora13 and the AR9285 wifi card... the connection is just too slow, and the wired connection works fine. I just figured out that a lot of VAIO users (so am I) were in the same situation, and solved their problem by downloading ath9k drivers from linuxwireless.org. Fine, I did it! That's what I found :
Quote:
Building and installing
cd /path/to/compat-wireless-2.6.32-rc5
./scripts/driver-select <driver-name>
make
sudo make install
...but make is looking for source files in /usr/src/kernels/2.6.34-7-61.fc13.x86_64/build/ , which doesn't exist! The /usr/src/kernels/ folder is just empty. I also found something about the fact that Fedora13 didn't came with kernel's source files... So how can I install that driver? (I didn't find the package via yum...)
View 5 Replies
View Related
Aug 30, 2010
I am severe wireless problems with Ubuntu 10.04 on my laptop.(Spec below)
I have just performed the first clean install since new. Installed a new Hard Drive as well. The machine and wifi was fine under Ubuntu 9.04.
It is booting much faster now but the wifi keeps dropping off.
Spec:
Machine - Acer Aspire 4310
Wireless card - *-network
description: Wireless interface
product: AR5001 Wireless Network Adapter
vendor: Atheros Communications Inc.
[Code].....
View 2 Replies
View Related
Sep 2, 2009
I am using Ubuntu 8.04 and when I open up my network settings, It shows my ethernet card and my modem but my wireless card doesn't show up. Under "Hardware Drivers" it says that my driver for my wireless card is a "proprietary driver" and that there is no driver I can get for it for Linux. Is there any way that I can get my wireless card to work? I tried going to the HP website and downloading a driver for it, but all of the drivers only work for Windows....
View 2 Replies
View Related
Mar 5, 2010
i installed Opensuse 11.2 recently but the wireless internet wasn't working been searching for few days now and i can't find the solution. it shows my modem, and i can connect to it but for some reason it appears to drop the connection it keeps asking me for my encreption key so btw is one of the first times i worked with linux / opensuse.
View 4 Replies
View Related
Jun 29, 2011
I am using ubuntu 9.10. Kernel version is 2.6.31-14-generic. I couldnt find driver for Atheros wireless card which shows in 'lspci' 0c:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
View 9 Replies
View Related
Nov 7, 2010
This morning I installed Fedora 14 on my laptop. During the setup, I was able to configure the wireless connection and use it to install additional software from the FreshRPMs and Livna repos. When the install was completed, I was surprised to find the wireless not working. When I click on the NetworkManager icon at the bottom right corner, I see "Wireless Networks" Under that it says "device not ready" and it is greyed out so it cannot be click on.
Running lspci -vnn returned
07:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
Kernel driver in use: ath5k
Kernel modules: ath5k
View 3 Replies
View Related
Jun 26, 2009
I have installed centos 5.2 on my acer aspire 5610z, but I do not recognize the wireless card atheros, what should I do?
View 1 Replies
View Related
May 30, 2010
I've installed it no problems on my desktop and I really love it. Now I'm trying to install it on my Satellite and I'm having a couple of problems. When trying to connect to my wireless network, I can see my network, but it will just keep asking me for my WEP. I've confirmed that there is nothing wrong with the network or the password I've provided. Sometimes when I boot up, the network manager just says that the wireless networks are disconnected and can't find any. The wired connection always works just fine.
Here are the system specs:
Toshiba Satellite M45 S169
Ubuntu 10.04 Lucid Lynx LTS Fresh Install
Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
Kernel driver in use: ath5k
Kernel Modules: ath5k
View 3 Replies
View Related
Mar 25, 2009
I like to test my network often. Until recently, I've been doing so on my old Ubuntu 6.06 laptop... the problem is It's too slow (1.06 GHz single Core ), and old, (designed for Win 2000) to really be effective any more. So, recently I bought a new laptop...one with a Dual core Processor, and twice the speed. Anyway, I'm running Fedora Core 10 X86_64 on it. My problem is as follows:
Although I do have MadWifi installed, for some reason, I still can't put my Atheros based Netgear WPN511 into monitor mode. (in the Network configuration window, it says "Atheros Communications Inc. Atheros AR5001X+" I'm not sure what it means but I'll put it in in case it helps) does MadWifi not work with Fedora? if not, is there a Fedora 10 (X86_64) alternative?
View 8 Replies
View Related
Apr 7, 2011
I want to load Atheros wireless card to ubuntu linux OS having kernel 2.6.32.21. I have loaded the atheros driver and I observed the following log messages when card was inserted.
[ 55.732223] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 55.732294] pci 0000:04:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[ 55.810152] ath5k: disagrees about version of symbol ieee80211_free_hw
[code]....
My suspect was the driver was 2.6.35.1 kernel based i may need to update my kernel, but i have other laptop having 2.6.32-21 kernel and this card works fine.
View 2 Replies
View Related
Aug 12, 2009
installing my wireless card Atheros AR9285.I have tried to get it working with both compat wireless - Ath9k driver but I dont know exactly how to do.I have also tried to get it to work with ndiswrapper, but it is really tricky because nothing is available in centos like precompiled ndiswrapper.I used to work with Arch Linux so everything in Centos is totally new to me and I don�t understand a thing:I need to get it to work as soon as possible.What I have read the should go to just "activate" the ath9k driver with my card and it would work,
View 3 Replies
View Related
Jul 31, 2011
Just re-installed Bodhi. Ran update, dist-update, set up connection and connection still slow or timing out and reporting errors in 'iwconfig'. This is 3rd re-install of this version. Have also tried 3.0 kernel and pae versions of Bodhi. Cannot get this connection up to speed and without errors. Atheros chipset ar9271.
Sorry for weird subject line and opening paragraph. Trying to make it easy to find and browse in case this gets solved and can help someone else. Not being a Linux guru, I can only hope to help others through my mistakes and ignorance.
I followed instructions to update driver listed at Linux Wireless.
In addition to following the directions at Linux Wireless, I also downloaded the GUI Program to install ath9k_htc.
No luck. My connection reports 1M/s and is reporting "invalid misc:" errors in iwconfig.
I'm running Midori browser but apt-get and wget are also downloading slowly.
I'm connecting to a Zyxel 660 series router using WPA/WPA2.
uname -r
Code:
Code:
Code:
Code:
sudo lshw:
Code:
View 1 Replies
View Related
Apr 19, 2015
I am using an atheros based wireless card. I am able to scan for and find networks but can not resolve addresses:
procyon@debian:~$ sudo ping -I wlan0 8.8.8.8
ping: Warning: source address might be selected on device other than wlan0.
PING 8.8.8.8 (8.8.8. from 10.0.0.7 wlan0: 56(84) bytes of data.
From 10.0.0.7 icmp_seq=1 Destination Host Unreachable
From 10.0.0.7 icmp_seq=2 Destination Host Unreachable
From 10.0.0.7 icmp_seq=3 Destination Host Unreachable
From 10.0.0.7 icmp_seq=4 Destination Host Unreachable
From 10.0.0.7 icmp_seq=5 Destination Host Unreachable
From 10.0.0.7 icmp_seq=6 Destination Host Unreachable
View 2 Replies
View Related
Jan 5, 2010
I'm trying to find a driver for my wireless card (Atheros AR928X) and I think it's ath9k what I need. As far as I know there isn't a linux driver for it, so I installed ndiswrapper to use a windows driver instead. The problem is that when I type modprobe ndiswrapper I get "bash: modprobe: command not found" (even as root). I know I'm missing something about modprobe, but I can't find any help on google. Anyway, I installed ndisgtk next, because I thought it would be easier, but when I go to System> Administration> Windows Wireless Drivers I get a message "Unknown error".Do you have any ideas on how I'll make ndiswrapper work?
View 3 Replies
View Related
May 10, 2010
Ok, so I upgraded my acer aspire one to the new Ubuntu 10, and at first everything was working fine, except the audio. Now, for some reason, my wireless and ethernet ports have died. I can't get online by either method. I can do ifconfig <device> up and it will show up if i do iwconfig or ifconfig, but the wireless isn't associated with the AP. Currently I'm trying to load some drivers for my atheros card, and we'll see how that works outReally I was wondering, how come the modules don't load at boot time, and how can I fix this? I've been a Linux user for quite sometime, however I've been more of end user
View 1 Replies
View Related
Apr 17, 2010
I haven't done Linux since before it had Wireless support, and have never had to tinker with network settings, so I am at a loss.My searching may be weak, but when I tried, I found nothing relevant except to determine some of the things usually asked for in threads of this nature.The symptom is very slow connection when using wireless, but it does fine when I hardwire it. Using Windows 7 on the same system it flows nicely.
View 4 Replies
View Related
Oct 28, 2010
I have managed to compile and load the RaLink drivers for my wifi card and get an internet connection.My problem is that when I do a broadband speed test on using chrome I get about 1.5 Mbs and on my laptop (Windows 7 meh :-( ) its closer to 7Mbs. I was wondering if there are any other settings I can modify or tweak that could potentially change to improve this. or maybe a better way to test the through put of my connection?I downloaded the latest drivers for my device from Ralink and compiled new module, but I get a little confused on what settings to do and where it reads any configuration information from.
Also this may be off topic or thread, if so I apologise, but I am sure there is a quick answer to this and there is a lot of different information out there on where and how I load my new rt3562sta.ko module into the kernel on start up. As currently I am calling insmod on it manually every time I start up then the Network Manager picks it up and connects.
View 5 Replies
View Related
Jan 12, 2011
I have recently installed Linux Mint 10 on my laptop. When I look at the Device Manager in Windows 7, it says I have an Atheros AR9285 Wireless Network Adapter. Right now, I am unable to connect to wifi with Linux. What drivers am I able to install, and how would I install them?
View 3 Replies
View Related
Mar 20, 2011
I have an Acer Aspire 5920G laptop, which uses Intel PRO/Wireless 3945ABG wireless card. I upgraded from 11.3 to 11.4 using live upgrade and after the upgrade wireless internet became really slow. Now I'm back to 11.3. I experienced the same problem with speed when I was choosing Linux distro - first I tried Fedora and Ubuntu and both had the same problem, but when I tried openSUSE 11.3 it worked fine. With 11.4 Network Manager showed that signal is at 100% and it connected to router with normal speed, but when I tried downloading a file I got 30kB/s max, while I used to get 1,1 MB/s with windows and 11.3. I also noticed that right after boot I got decent speed, but it only lasted for less than a couple of minutes.
Since 11.4 should have better or at least the same driver as 11.3, problem is probably with configuration, but I am using NetworkManager, so I have no idea what could be wrong.
View 5 Replies
View Related
Aug 17, 2010
i have the cd just do not know how to install the driver for my linksys wireless pci card 14e4:4329the device is BCM43XG
View 4 Replies
View Related
Oct 27, 2010
1 ) make and model of wireless device Athreos 5k
2 ) driver version in use dont know
3 ) any error message. -
abhishek:/ # sudo /usr/sbin/iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
4 ) what you have tried to rectify the problem.
Tried to install all the patches.
5 ) any trouble-shooting guide you have tried to follow. - The previous two stickies
6 ) openSUSE version 11.3
7 ) type /sbin/lspci -v" in a terminal; copy and paste the section that identifies your wireless card and it's chipset. 07:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 137a
Flags: bus master, fast devsel, latency 0, IRQ 23
Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
[code]....
View 9 Replies
View Related
Feb 2, 2011
I have searched and have not found anything specific to my issue. I am currently using NDISWrapper to load the bcmwl15 driver and when it's active it works beautifully.Problem is sometimes at boot, the card doesn't "turn on" and I don't know how else to describe it. The OS does not even detect that the hardware is present. I have disabled wireless hotkey in BIOS. The only way to make the wireless card "active" is to reboot with the wiredconnection to the router. After doing that the wireless card "wakes up" and works awesome.Is there anything I can do to make sure the driver load at boot?mes I get the error that NDISWrapper is not modprobbed when I go to network configuration and if I wish to do i now? I don't know if that has anything to do with the boot sequence. Using the <modprobe ndiswrapper> command as root does nothing permanant
View 9 Replies
View Related
May 3, 2011
when it comes to openSUSE but I am earnestly trying. I installed the openSUSE OS on my HP dv6000 laptop, but it does not seem to recognize my wireless card (which is a Broadcom 4311).
View 7 Replies
View Related
Dec 25, 2009
My wireless device is an integrated Dell Wireless 1397 WLAN Mini-Card, I am unsure about the driver I have in use. I am sure I have a driver installed because the configuration screen shows my network. I currently have the computer plugged into my network via CAT 5 but I would like to be able to use the wireless (obviously.) I am using Open SuSE version 11.2 and I have run the updater. I could not see my wireless network before running the updater and I can now so I know that the updates have helped but I am again stuck. I have tried to search the wireless forum and I have tried to tinker with the settings in YaST , but nothing seems to be working. Reading the Welcome page of the wireless forum, I tried the Broadcom chip-set advice:
[Code]...
I have read and taken to heart the advice given for receiving help and if any more is needed I will gladly give it. I have a small amount of experience with SuSE Enterprise edition so I can understand some technical stuff but I am best at following specific instructions.
View 7 Replies
View Related
Apr 8, 2010
I clicked "Network Settings", and I found that the ip address was wrong, which is "192.168.1.10/24", and netmask field is empty, so I modifed the configuration file located in /etc/sysconfig/network, named ifcfg-wlan0, added one line(NETMASK= '255.255.255.0'), saved it and reboot the system. After rebooting the system, I still found the ip address is wrong and netmask field is empty, so I have to use ifup command to activate my card manually every time the system starts.
View 1 Replies
View Related
Apr 2, 2010
turn wireless card on for the Dell Studio 16 (1645) for SUSE 11.2 64-bit.
View 3 Replies
View Related
