im trying to install ubuntu 10.10 on my notebook but it stop on the section of entering my name, computer name, user name, password... and at the bottom section it says... ready when you are...
View 2 Replies
I just want to change the text displayed on bootup from "Desktop - opensuse - lotsaversion numbers" to "OpenSUSE 11.3".I tried doing it during installation, but it didn't seem to take affect, and now it won't let me do it through Yast
View 5 Replies View Relatedi am having a problem with the installation with ubuntu 10.10 during the installation, i was entering my setup info (login password, timezone, etc.) when everything stopped working, it wouldnt let me continue, the forward button wouldnt work. i let it set for a good 30 minutes but it wouldnt do anything.
so unable to continue, i restarted and tried to boot from my cd drive and now it wont boot from the drive, and since i let ubuntu delete my windows partition, i cant boot from it so i basically have a blank hard drive. the cd drive will boot other cds because i booted hirens boot cd in an attempt to make sure the cd drive was functioning and ran diagnostics to make sure the drive was alright.
How to allow a user to login without entering a password?
If my question sounds wierd then check out m-net at www.arbornet.org/m-net.php and see how it works.
Telnet / SSH to m-net.arbornet.org and type in newuser and it won't prompt for a password.
in ubuntu 10.04 how to get into single user mode with out entering the root user password
View 1 Replies View RelatedI am using fedora 12.I have two internal drives. Both are ntfs. Whenever i click on them it prompts to enter root password. But i want to mount them as normal user without entering any root password. How can i disable it so that i am not asked to enter root password everytime i mount the drives.
View 2 Replies View RelatedI tried installing lubuntu 'over' ubuntu, but am now locked out. Basically, the login screen loads, I've tried entering my username and password, but it doesn't work. I'm not really sure of my username as Ubuntu would automatically fill it in for me. But lubuntu isn't auto-loading my username, so I've been trying to enter all types of variations. I am 100% of my password though
I tried getting help at lubuntu's chat, but that's been kind of hard since there aren't that many people responding. The lubuntu people had me go into recovery mode (2.6.38-8 recovery) and so that would go smoothly. But when the screen of the options of resume, clean, dpkg, failsafex, etc, I cannot move the selector down. So basically, the orange selector is stuck at resume. Whenever I press the down key, the computer runs some lines, and I cannot go back to the list of options. The list is still visible, but can't select any of the options.
If I press the 'end' button, that executes something (probably the last option in the list), and I shut down the pc when it did that. The other arrow keys do nothing. The tab button manages to move the selector from the list to 'Ok' and 'Cancel.' But I cannot move the selector down.. TL;DR: I need to either get into recovery mode, or find a way to get my exact username lubuntu thinks it is.
I'm totally new to this linux thing and I have a very strange problem. I downloaded the .iso and burned it to CD as per instructions. I had intended to install alongside existing WinXP Pro Sp3. Everything seemed to be going fine until it the installer got to the "User Info" Screen where it asks for my name, the computer's name, password, etc. At that point nothing I did would allow the "forward" button to work. I backed up a step or two and went forward again to no avail. I ended up hitting the hard reset button to get out of it. I never saw any error messages even though I scrolled through the install log at the bottom of the install window. Now my HDD is 60 Gb smaller (The part intended for Ubuntu) under Win XP and I have no idea what to do about it.
My system:
Asus P5NE-SLI Mobo
Intel Core2 Duo 8400 3.0 Ghz
2 Gb ram at 800Mhz
Nvidia 9800GT GPU 512Mb
Win XP seems to be working normally except for the loss of HDD space.
I'm using Ubuntu 10.04LTS. I'm trying to configure my chat accounts. But after entering username and password, it is asking "Enter password to unlock your login keyring". I have entered my login password. But it is saying that "The password you use to log in to your computer no longer matches that of your login keyring."
View 4 Replies View RelatedWhenever I am prompted to enter the root password, typical example would be in 'Power Management' clicking the button 'Make Default', pressing ENTER or clicking AUTHENTICATE doesn't close the box. To get passed this I have to press ALT+F4 and it continues which I'm assuming still does authenticate.
View 2 Replies View RelatedWhen I use rar e to extract a rar file, the request for entry of the password always says password will not be echoed. For longer passwords, this is difficult, since a single mistyped key will result in an error.
Does anyone know how I can use the rar command to extract and have the password echoed (appear on the screen as I type it)?
I need to stop a program when notebook goes on battery and start it when using AC. I'm using 10.10 netbook edition.
View 2 Replies View RelatedSo, I want to write a bash script that will allow me to scp and ssh to a different server in the network.
Though, I dont know how to get rid of the inputting passwod line if both commands.
I would like to be able to enter codes. I have pressed ctrl alt f5, 6 etc and get to the black screen which asks for username and password. I enter the username and password that I use to log in, but I keep getting the message telling me that they are not correct.
View 8 Replies View RelatedAny idea how to log a user in without a password in GDM? I've found this archived thread but it doesn't appear to do anything when I tried what it says: [URL] I'm not looking for auto-login. I'd simply like one user to be able to click on his name and it will log in without prompting for a password.
View 3 Replies View RelatedI am new to Ubuntu and been trying to download some software not in the Software centre but when I go to terminal and I enter the command text I get prompted for my password ( it automatically has my login name) but the flashing cursor will not allow me to enter any text ,it just keeps on flashing but then it tells me I have entered incorrect password, What can be the problem ? The keys are not connecting with the terminal window it appears.
View 3 Replies View RelatedI've installed Karmic after having used Jaunty in the past and it's working great, but I have a couple of security questions...
I opened the Disc Utility (Palimpsest) under System>Administration and was amazed that it looks like it will let me delete partitions on my hard drive, and without even asking for a password. This seems like an enormous security oversight, what am I missing here? Is there a bug filed for this?
Also related, why does Ubuntu allow a user to disable startup applications without requiring a password?
I'm a newbie running Ubuntu 9.10. I have two users (wife and me), and each user's screensaver is set to lock so that on wakeup, we get to choose which user's desktop to go to. However, Ubuntu requires a password, so this is pretty tedious.I'd like to switch users without entering any password. I know about this trick that works for the boot login, but it doesn't deal with multiple users.Is it possible to set empty passwords for users in Ubuntu, or skip the password in other ways?(I'm expecting real Linux users to suggest that passwordless users must not get any rights and there be an admin user with a strong password.
View 2 Replies View RelatedIs it possible to switch users in Debian without entering a password, as in Ubuntu Maverick? I already tried adding a nopasswdlogin group but it did not work, even though the "don't ask for password on login" entry in the login manager is no longer greyed out. Replacing gdm3 with gdm also did not work.
View 5 Replies View Relatedam trying connect to server via ssh after entering the password it's just keep stuck !!!
*** NOTE : i was using the server and am sure about the user name and password ...
I just installed CentOS 5.4 (x86_64) and I encrypted my /home /var /tmp and /mnt/Storage partitions, along with my swap partition. My only complaint is that when I boot, I have to enter my password 4 times, and I did not pick a short password. The password is the same for all 4 partitions. Is there anyway I can set things up so I can just type my password once? Once I get everything set up, I won't be booting that often, but right now it is a PIA.
View 2 Replies View RelatedI have an unreasonably long time to wait from log in, to when my desktop is ready, it takes 40 seconds from hitting enter to seeing my files on the desktop, and about another 15 seconds from then to hearing the opening jingle. It used not to be this way, before it took less than 10 seconds, but about 4 days ago this time shot up suddenly, is there some way to diagnose whats causing this delay?
View 7 Replies View RelatedI am liking Opensuse, but have a problem when using my NFTS partitions (dual boot so docs on this partition). I always have to enter a password which annoys me to no end. Most distributions do this, in fact only for Mandriva have I been able to find out how to do this without a password. Is it possible with Opensuse?
View 1 Replies View RelatedI have a system installed fedora 13 which I have updated yesterday. Now when I am trying to start system it restarts immediately after entering the user name and password. I am not the expert user.
View 1 Replies View RelatedWell, first off I'd like to say that I am much happier with the wireless on Ubuntu 10.04 than I was on 8.10 (the last time I tried Ubuntu). However, there is a small annoyance I'd like to fix: every time I log in, I get a prompt saying that an application (the wireless network manager) is requesting the password for such-and-such keyring. I have to enter the password before I can connect to my network. Is there a way to get around this somehow so that I don't have to enter the keyring password for this keyring (the "default" keyring) every time I log in?
View 3 Replies View RelatedI cannot sudo nor log into a second ssh session on my Ubuntu 10.10 server edition headless setup. Entering an incorrect password works as expected but the correct password gives errors, and on the second attempt a segfault. I recently changed my password as the old one was about to expire, that was 3 days ago, I can't find evidence that I have sudo'ed or logged in a second session since, I have been logged into it via ssh throughout all of it and I am still currently logged in. What should I do to correct this problem? I'm worried that by turning it off I will lose all access. Is the only option using a live cd to change the password?
[Code]...
Two weeks ago my computer started freezing on start up when plugged in. It was suggested to upgrade the APM. What is this and is it not updated through the package update? If not how do I upgrade it?
View 1 Replies View Relatedwhen booting up the system it promts for user and pass. After entering username and password followed by enter the system looks like its going to start. But no, it loads a white page for a couple of seconds and then go back to the section where you enter username & password. Why? the user and pass was correct. If i hit ctrl + alt +f1 and use the same username and password i can login with the CLI. But not in the graphical login prompt. How does such a problem gets fixed?
View 4 Replies View RelatedIm using opennms network configuration backup server called 'RANCID'.It run on top of RHEL5 system and using APache. Here's the link which i'm accessing [URL] But any one can access this URL and obtain my configuration files
I want to secure this using a logon page.allow login Only for the successful authentications by entering the predefined username and password But after get authenticate book marking the above URL still can access anyone since it didnt prompt username and password again In eachtime executing the above url it should direct to authenticate page
I have done a clean install of Ubuntu 11.04. My HP ProBook 4520s notebook computer exhibits the following problem. I use the notebook with lid closed, connected to Samsung SyncMaster P2350 23" LCD Monitor. When Ubuntu boots it selects 1024 x 768 resolution. I then go into the display settings and notice that it is set to display the same image on both monitors. If I uncheck this setting, I see the Samsung and can make changes to the resolution settings of both laptop monitor and Samsung monitor, however, when I click Apply, the Samsung I am viewing goes blank. If I then open the laptop lid, it too is blank. After a cold reboot, I am able to get the Samsung monitor to act as a desktop estension perfectly, but not as the only monitor with the laptop screen turned off. Any attempt to turn off the laptop monitor in the settings results in no screen at all.
In the office, I have an LG 19" Flatron monitor, and Ubuntu does not exhibit the same problem. I can boot up with lid closed, and the Flatron works fine as the only monitor and at it's native resolution all by itself. Booting with lid open, and then closing the lid, also results in the Samsung going blank, but probably for the reason that there is no option in power management to DO NOTHING when the Lid is closed.
It seems that Ubuntu have forgotten about people who use their laptops as desktops in this way. I am not happy to run with the laptop open and split screens, as I cannot get the launcher into the Samsung, and everything has to be moved over all the time, is there any work around that anyone may know about?
The HP ProBook uses Intel Graphics, for which there are no particular additional drivers I am told. The problem also happened in Ubuntu 10.10, but before 10.10 I don't recall ever having this problem (from 7.04 thru 10.04)
