I have a Dell inspiron 1420 and its set up as a dual boot. Windows/Fedora.I cant get the wireless card to work. I review some previous posts but still cant get it working.
I did a /sbin/lspci
Network controller: Broadcom Corporation BCM4310 USB Controller (rev 01)
I did $rpm -q b43-fwcutter
b43-fwcutter-011-3.fc9.i386
I have install 64bit version of Fedora 12 on a new Dell Inspiron 1545 with a Dell 1397 wireless card. It actually uses a Broadcom BCM4312 chip.
I have install the following rpms:
Code:
broadcom-wl-5.10.91.9.3-1.fc12.noarch
kmod-wl-2.6.31.9-174.fc12.x86_64-5.10.91.9.3-3.fc12.11.x86_64
kmod-wl-5.10.91.9.3-3.fc12.11.x86_64
code....
what I do not understand is the state of the card as unavailable. how I can activate this card?
i've installed openSUSE 11.2/KDE. Installation process finishes with fun. The first thing that i wanted in my laptop don't work. That's wireless internet. I've google and google. saw many thereds in openSUSE forms and check what i understand after reading thereds. Finally what i understand is i've to install firmware. I've downloaded the b43-fwcutter and broadcom-wl-4.178.10.4.tar. Installed b43-fwcutter. and copy broadcom-wl-4.178.10.4.tar. in to root. by using
[Code]...
just installed ubuntu on a dell inspiron 6400 but the wireless doesnt work.
However, it works 100% when running from the live cd.
Can i install/copy the driver from livecd to hard drive, or is there another soultion for this?
I had just installed Ubuntu in my brother's laptop and the drivers for the laptop`s wireless card got deleted, or that's what is leading me to believe. Prior to the installation, the laptop was picking up wireless signals just fine. I tried finding the drivers on the INTERNET but there are too many and I don't want to get the wrong one. Even so, I don't know how to install it through Ubuntu or anything. I tried the "disswrapping" app. but it was looking for some sort of ".if" file type. I also tried using the Terminal, but I'm not an expert on this kind of stuff. I got Ubuntu 2 days ago on my own laptop.
View 1 Replies View RelatedBroadcom BCM4306KFB will not connect to internet.how do I download the firmware? I entered the following on the terminal:sudo/usr/sbin/install_bcm43xx_firmware...File does not exist....any ideas?I am running openSuSe 11.1
View 3 Replies View RelatedI am new to Linux. About 72 hours in, and I must say. I am quite impressed. Except for a small issue. I cannot seem to figure out how to get my wireless card working. I have used the bcm43xx technique with no avail. And am working on ndswrapper. The good news is I think I have the .sys file that works. But I don't have the .inf. However any way I could make this work would be great. Below I have posted my lspci stats.
Lspci:
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) .....
My dell inspiron 1150 internal wireless won't work and ive tried ndiswrapper. link to an open source driver?
My ubuntu distro is 9.10 (soon to be 10.04 as soon as i get the video drivers )
dell inspiron 1150
ubuntu 9.10/10.04
512 mb ram
40 gb hd
intel centrino cpu 2.80 ghz
i installed Ubuntu on my whole hard drive its the only OS i am running i can not get my internal wireless card to work i have tried to follow the post i have seen on here about the same computer but how to install/program my wireless card so i can get on the internet .
View 5 Replies View RelatedI can't activate my 5.1 surround. The sound preferences only show the 4.0 option. When I tried using the
Code:
speaker-test -Dplug:surround51 -c6 -l1 -twav.I can only hear the front and rear speakers. Am currently using 10.04. This problem bugged be since 9.04.
Here's my hardware btw:
Code:
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: STAC92xx Digital [STAC92xx Digital]
Subdevices: 1/1
code....
Tried testing the latest beta... but it still isn't working
I installed Ubuntu 8.04 on a Dell Inspiron 1420 laptop. All went good. But, the webcam was not recognized. I didnt see any packages to activate the Webcam. What should I do now.
View 1 Replies View RelatedI just completed installing openSuse 11.1 I followed the detailed steps given in Getting Your Wireless to Work When I try to scan for available APs in the vicinity, I get the following error.
~> sudo /usr/sbin/iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
Can someone guide me in configuring my wireless connection. Also, since I do not happen to have a wired connection, I am alternating between openSuse and windows everytime i need internet.
I have loaded the latest version of opensuse and I have everything working but I cannot connect to my wireless WPA2 network. I have downloaded the bcm43xx firmware using the method /usr/sbin/install_bcm43xx_firmware I then restarted the network. The computer will now read the network card and will find networks but I cannot get it to connect at all. At first it would connect using ifup in yast but would disconnect after a few seconds. It would never connect through NM. I have a usb network card that works just fine. I am lost as to how to fix this problem.
View 6 Replies View Relatedi have a dell inspiron 15r that i plan on running fedora on, however, today i booted fedora from a live cd and it was completely oblivious to the fact that i have a wireless card, obviously i need certain drivers for it, problem is i dont know what drivers those would be, or where to get them, http://www.dell.com/us/business/p/inspiron-15r/pd this is my laptop model, and it says i have a "Standard Dell Wireless 1501 802.11 g/n" wireless card, if anyone could tell me how to get this working,
View 13 Replies View Relatedif i press the function key(FN) and F2 wireless disables but it wont renable if i press the button combo again.the only way so far i have managed to reenable wireless was to reboot.
View 1 Replies View Relatedtoday my windows crashed and i decided to move into Linux.But here comes my biggest problem now, i cannot connect to wireless network but i am able to connect through wired connectionmine is a 10 year old computer so i think the card used is Intel PRO/Wireless 3945ABGi am using Fedora 14. please note that i know only very little in Linux so please respond accordingly
View 14 Replies View RelatedI am using a dell laptop which has Dell 1397 802.11B/G Wireless Mini Card. I not able to connect to internet and was not able to detect what actual problem is weather card is not supported (i.e. drivers are not available) .
Also, if any one can point to exact process to connect to wireless Lan using fedora12.
My wireless device is an integrated Dell Wireless 1397 WLAN Mini-Card, I am unsure about the driver I have in use. I am sure I have a driver installed because the configuration screen shows my network. I currently have the computer plugged into my network via CAT 5 but I would like to be able to use the wireless (obviously.) I am using Open SuSE version 11.2 and I have run the updater. I could not see my wireless network before running the updater and I can now so I know that the updates have helped but I am again stuck. I have tried to search the wireless forum and I have tried to tinker with the settings in YaST , but nothing seems to be working. Reading the Welcome page of the wireless forum, I tried the Broadcom chip-set advice:
[Code]...
I have read and taken to heart the advice given for receiving help and if any more is needed I will gladly give it. I have a small amount of experience with SuSE Enterprise edition so I can understand some technical stuff but I am best at following specific instructions.
turn wireless card on for the Dell Studio 16 (1645) for SUSE 11.2 64-bit.
View 3 Replies View RelatedI have an Inspiron 1300 and have followed the "B43" instructions here:URl...Plus various other guides including the "one click b43 fix" but nothing useful happens. Wired access doesn't work either.
View 4 Replies View RelatedI recently upgraded from 10.4 to 11.4 on my Dell Inspiron laptop, and now my wireless is completely disabled, and I do not have an ethernet cord I can use. (I do not have internet access at home, I rely on public wifi.)
View 2 Replies View RelatedI recently upgraded from Ubuntu 10.4 to 11.4 on my Dell Inspiron laptop, and now my wireless is completely disabled, and I do not have an ethernet cord I can use. (I do not have internet access at home, I rely on public wifi.)
View 13 Replies View RelatedI just want to report that I managed to get WLAN running on my Dell Mini 10 (Inspiron 1012) with OpenSuse 11.3 KDE.
This one contains a Broadcom 4312 WLAN card
Code:
lspci -vnn|grep Broadcom
07:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
0b:00.0 Multimedia controller [0480]: Broadcom Corporation Device [14e4:1615]
Subsystem: Broadcom Corporation Device [14e4:1615]
I just installed the broadcom-wl and broadcom-wl-kmp-desktop packages from the packman repository. Then there is a new entry in the bootmanager menu. Using that one, WLAN works fine.By the way: Can somebody explain me the difference between the broadcom-wl-kmp-desktop, broadcom-wl-kmp-default, broadcom-wl-kmp-pae, broadcom-wl-kmp-xen packages? I did not find any documentation about that.
I installed openSUSE 11.4 in my laptop as dual boot.But wireless drivers are not working.Please give a suggestion to work wifi.
View 3 Replies View RelatedThe network icon and sound icon disappeared from the panel all of sudden one day while i was using ubuntu 9.10 and the network got disconnected. It used to work fine before when i was using ubuntu 9.04 and even after i updated to 9.10, but then that happened. I added the notification area back to the panel but now ubuntu cannot even find any wireless networks. When i connect a LAN cable to my laptop the internet works fine, but the wireless networks area in the network icon is grayed out and it doesn't show any wireless networks. I'm using a Dell Inspiron 600m laptop and my network card is Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05).
View 9 Replies View RelatedI'm running Ubuntu 9.10, Dell Inspiron 1545. I have the NDISwrapper installed, and the driver shows up in "Hardware Drivers" as activated (Broadcom STA wireless driver) it also shows up in "Windows Wireless Drivers" (bcmwl6) but it still won't allow me to connect wirelessly.
View 9 Replies View RelatedI am having trouble in getting the wireless up in Ubunto 10.04. Under Wireless Networks it says "wireless disabled". I have a dual boot with Windows 7, installed Ubunto with the help of Wubi installer. My laptop is Dell Inspiron 1545, with a 64 bit architecture.I have already done checking and enabling the wireless driver by going to System- Administration-Hardware Drivers and choosing Broadcom STA driver.
View 7 Replies View RelatedI've got a Dell Inspiron 1545 with wireless card Dell wireless 1397 802.11g. It was working fine with Windows and Ubuntu 9.04 (I've got the two OS installed alongside). But as soon as I upgraded my Ubuntu to version 10.4 I realised it lost its wireless connection! I updated the system, the hardware driver for Broadcom STA wireless driver is activated and in use (according to Ubuntu Hardware drivers checker) but the fact is that I can only connect on the Internet if I hook the net cable on it, when I run the mouse over internet connection icon at the topright side of the monitor I see "no network" message and when I left click on it the option "wireless network" it's disabled and gray. How can I get my wireless card back working?
View 1 Replies View RelatedI've installed Ubuntu 9.10 on my Dell Inspiron 1440 laptop. How can I install the necessary wifi drivers for my machine.
View 2 Replies View Relatedi have to say that i'm not too familiar with Ubuntu... or Linux in general . I've installed it once, just to test it out but I didn't know how to use it so i just reinstalled windows. The other night, i was bored and decided i wanted to re-try Ubuntu and to my suprise, i found Wubi. I love ubuntu now and i made the decision to permanently switch over to ubuntu.
At first, my wireless wasn't working, but there was a quick fix. All i had to do was go to the Synaptic Package Manager, Reload, and search for "Broadcom." I installed the Broadcom STA Wireless driver and i was online within a couple of minutes. I then played around for a couple of hours before turning my laptop off. But, this morning, when i turned it back on...I coudlnt' connect. When i click the little connection icon in the top right, i see the message "Wireless is disabled".
There is a key on my computer that turns the wireless card on or off, and i have tried it. It doesn't work. I have reinstalled the broadcom driver and it doesn't work. I've rebooted...And it doesn't work. I don't know enough about linux to get a solution and every other solution i find on the internet doesn't work.
I have seen in other threads that you guys usually ask for a a couple of things from the user. ifconfig and the sudo lshw -C network so i have included them below. I also looked into the ubuntu help documentation and it told me to do the lspci command.
ifconfig
Code:
eth0 Link encap:Ethernet HWaddr a4:ba:db:d1:61:c2
inet addr:192.168.1.68 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a6ba:dbff:fed1:61c2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code].....