I have a printer Konica Minolta Bizhub DI350/DI350, I want to installed on Centos 5.5.
I try cups but I don't see drivers for this model even on their site.
Does anyone have been setup this printers on Linux RedHat/Centos or Ubuntu?
i am facing a problem with my pc in lab. i have a konica minolta printer which is running in redhat9. Now a day pc is showing some errors (hardware related). So i want to upgrade my pc.
How can i upgrade the system with its existing softwares.Because it contains some special softwares which control the printer with its LCD touch screen. This product has been discontinued on January, 2006 .
I am trying to install a Konica Minolta 2430 DL printer from a computer using the Mepis I believe I'm using 8.5. I would have to restart the computer to find my version and then I would loose this page.
I downloaded magicolor2430DL-1.6.0.tar.gz to /opt and have been trying to install it every since. CUPS will not install the minolta 2430. I am doing this across the internet because that is how my computer club has the printer set up. Through the ethernet. I have pinged and fingered. It can find the address for the printer. That is not my problem. My problem has been library files it couldn't find. Got those. Then jbig. Got that. Now I am getting this print out when I do a ./configure.
root@mepis1:/opt/magicolor2430DL-1.6.0# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
[Code]....
I am trying to find a printer driver or PPD file for the Konica Minolta Bizhub c200 network printer.
I am running Ubuntu 10.0.4 and we currently only have drivers available for Windows XP, however I do not have a PPD file available.
I have been trying for a while now to get hold of drivers but searching google did not return anything as yet.
Is there anyone out there that might be able to assist me in getting this printer installed on my notebook?
I have a Konica 2530DL colour laser and have used it with versions from 6.06 onwards.
However now, with 10.10 I find I cannot print at from most apps eg OpenOffice or PDFs. I get errors on video frame showing on the printer but nothing obvious on the PC.
Test print and gedit text prints works fine and so does using a VM with Lucid running on the same host prints fine too from anything.
Can't see any other comments about this problem anywhere but I know the printer is fairly common and has worked well with Linux in the past.
Using it with IP printing on port 9100 and allow the installation to detect and select the driver. Not setup anything clever and I have the same issue with a Lucid upgrade to 10.10 or a clean install. However the VM running Lucid prints fine. Must be something changed on Maverick somewhere.
anybody found or wrote driver for Konica 7130 best 64bit
View 2 Replies View RelatedWhat is different between BSD family and linux? i see bsd have some distro like freebsd, openbsd,pcbsd and etc.linux is popular or bsd?in bsd can i compile and run linux program?for example execute rpm file.i see yahoo server use freebsd,but why not use linux?what bsd use environment? kde or gnome?
View 10 Replies View RelatedI'm looking for some software that could help me make a family/work tree. The only problem is that I would like to add other types of connections other than the blood related ones, such as worked with, studied with, supervised someone else etc. And perhaps have the possibility of adding some data about each person and export in a format that can be used by other programs as well.
View 1 Replies View RelatedI am setting up the laptop for the family to use. I have my own user account, which is all set up nice and pretty. I need to make 3 new accounts for the rest of the family. Since my user account is all set up, I am hoping there is a way to copy this account's configuration (customized theme, compiz settings, edited menus, installed applications ie awn, etc...) to a new account.
View 4 Replies View Relatedit get hanged on NET:Registered protocol family 2
View 1 Replies View RelatedI have a very strange problem in a C++ RHEL4 app. Here is the code: socket(PF_INET, SOCK_STREAM, 0) returns errno 97 socket(PF_INET, SOCK_DGRAM, 0) returns successow that is strange or what?additional info:1. Extracting the above code into a test program, both return success.2. Placing the above code into the 1st line of my app, error as above.3. I ran app and test program in the same terminal window.4. My app links in many static libraries 5. My app runs fine when compiled and linked on RHEL56. My APP is a ss7 endpoint (SIP <==> SS7 message flow)7. I verified PF_INET, SOCK_STREAM, SOCK_SGRAM values are correct.
View 2 Replies View RelatedThis message appears very often in teh output of very different programs, for example Firefox/Swiftfox, Thunderbird, Mplayer In case of Mozilla apps it sometimes freezes KDE interface too (can't switch windows or panel does not pop-up) for a few seconds. IPV6 is not compiled into kernel and module is not built. It is disabled on the eth0 interface too.
View 1 Replies View RelatedI have following in cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
[code]....
It gets stuck at the splash screen(the ubuntu logo) However it can boot in failsafe graphics mode and it boots with no problem if my second display is connected. It freezes if I try to change my display settings and it tells me my graphics card is not recognized. I'm using Lucid Lynx. I tried to do a fresh start but grub loads before the ubuntu cd and/or usb drive.
View 2 Replies View RelatedCompiling a kernel on this machine first time and get upset with which processor family/type/options to select for my Intel Pentim Dual Core T2390.Does sombody know how to configure kernel better for this processor?
View 5 Replies View RelatedI am looking for a good/free webbase photo gallery. Would like to display family pics to my website. What do you use ?
View 3 Replies View RelatedI'm not able to configure my microfone. Audio works very well. HW it's OK, mic works well on windows. Recording WAVE 'foo.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
Plug PCM: Linear conversion PCM (S32_LE)
Its setup is:
stream : CAPTURE
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
[code]...
I have intel 82801G (ICH7 Family) High Definition Audio Controller on my Asus Eee PC 1005PXD. Unfortunately, mic recording gives very bad sound. I've tried changing sound levels but nothing has helped. My system is OpenSUSE 11.4 XFCE
View 2 Replies View RelatedI just got nexuiz and i have had this problem,
Quote: Using Linux I only see the map but no players and items.
I need to update drivers for my Mobile intel 4 series express chipset family. I've also had 3d issues with Guild wars on Wine.
Lets get straight to the point. im using Karmic, and as said by the title my audio card is not detected. lspci -v gives the following:
Code:
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: ASUSTeK Computer Inc. Device 1763
[code]....
Well, when I run alsaconf, it finds my 82801H and I go on to setting it up, it says it will run, but it doesnt run.
Quote:
Now ALSA is ready to use.
For adjustment of volumes, use your favorite mixer.
But my song don't work, ..... works, but no sound in that, and i have tried running alsamixer to raise the volume to the peak.
I have a vague idea that, this sound card has difficulty in linux but all I get is 3 year old patches for gutsy gibbon and fixes that are non-slackware so I dont have the files and what not.
I have been trying, but never seem to understand why it says it works when it doesnt work.
Oh turns out, from thinkwiki, [url]
Its AD1984 actually, and it didn't work on 2.6.24.2 mine is 2.6.29.2 .
I was reading this article on how to fix the sound in Ubuntu 9.10 after upgrading from 9.04 [URL] and when I open GNOME ALSA Mixer, nothing shows up (I have included a picture). I typed in:
[Code]...
I am having some problems getting the onboard sound card on my Intel DP45SG motherboard to work properly under openSuse 11.1. Yast appears to have detected the card as a 82801JI (ICH10 Family) HD Audio Controller, but I cannot get any sound out of the card at all.
I have tried to follow this thread, and have run the alsa-info script, the results of which are posted here. It appears to me that the codec that is listed in the alsa script, which is the IDT 92HD73E1X5, is not the same as that which is listed on Intel's site for this board, which is the IDT 92HD73E codec. Can anyone help me out with regards to getting this going? Additional info below:
[Code]...
I ended up setting up a basic linux file server as a pdc for that office. Our main office is a windows 2000 ads domain. The two offices are connected with a vpn. I only have two users at the new location so I simply have the linux and samba usernames/passwords setup manually. I would like to know if it is possible to setup a domain trust between the two sites so I don't have to create a username/password in the remote site for every user at the main office to access. I did some searching but came up empty.
View 5 Replies View Relatedi am trying to install openbravo on my server.I have installed all the pre-requisites as ANT, JDK(though i installed JRE).
Everything goes fine untill the ant setup and then running the setup-prerequisites...file (don't remember the exact name).
As soon as i issue ant install.source it ends up with some errors..
So I didn't notice when I setup my CentOS 5.5 server that I left / as RAID 0 on md1. All the rest are RAID 1. Is there a way I can modify the array to RAID 1 without a risk of data loss? I'm glad I caught this before I setup any other services. I've only setup smb so far...
[root@ftpserver ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md1 16G 3.0G 13G 20% /
[code]....
Im trying to setup multiple domU through the default bridge setup. I am able to access only one of them through the network at a time. If you ping one of the domU it works perfectly but you cannot ping any of the others until you stop pinging the one and even then it takes a bit before you can. Ive looked around for a while and seen similar problems but nothing ever seems quite the same. Im probably missing something really stupid. Or is this the way the bridge is supposed to behave? Do i need to use a routed virtual network?
[Code]....
I want to setup a FAI server for which I was looking for the best method of mirroring the Debian Lenny. I want to setup a local mirror with the best method available for mirroring. If it is ftpsync, please provide me some best ways of doing it. I tried ftpsync mirroring but that was not getting properly working due to insufficient I want this mirror to be accessible in my FAI setup so that I can start the installation on multiple machines and start the updates and package installation to be done from the same local mirror.
View 1 Replies View RelatedI've been all afternoon trying to install Ubuntu Lucid on my fakeRAID 0 configured (2) HDDs and am unable to set GRUB up. The fake RAID setup is provided by Intel Matrix Storage Manager, it is correctly enabled and the BIOS is also correctly set up -- in fact, I've managed to install Windows 7 with no significant hitch. After struggling with partioning the drives (had to follow advice I found on a very helpful guide online [0]), creating the filesystems AND getting Ubuntu's installer to actually do what it is supposed to do, I now cannot seem to set GRUB up. My system, as it stands, is unbootable at all; via live CD only.
This is how the RAID0 dev is partitioned:
Code:
# fdisk -l /dev/mapper/isw_ecdeiihbfi_Volume0
Disk /dev/mapper/isw_ecdeiihbfi_Volume0: 1000.2 GB, 1000210694144 bytes
255 heads, 63 sectors/track, 121602 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 131072 bytes / 262144 bytes
Disk identifier: 0x6634b2b5 .....
Im trying to set up my workflow to a terminal-based setup, so that accessing my computer through SSH will provide many of the things I need and use right off the bat. I have Mutt working great with my GMail account, so that's good. I do have a question though. Using the application Calcurse (featured on Lifehacker a few days ago, [URL] I am at a loss to figure out how to interface with Google Calendar. Is there a trick that Im missing, or does anyone know of another terminal app that plays better with Google Calendar?
Also, I was looking for a 'Digital Clock', essentially, again, a terminal/text based large print clock; similar to the one in the lower left corner on the attached pic. I was looking for a telnet server from the Atomic Clock, but no such luck so far.....