Ubuntu :: 2530 Konica Printing Fails With OpenOffice And Maverick 10.10
Oct 18, 2010
I have a Konica 2530DL colour laser and have used it with versions from 6.06 onwards.
However now, with 10.10 I find I cannot print at from most apps eg OpenOffice or PDFs. I get errors on video frame showing on the printer but nothing obvious on the PC.
Test print and gedit text prints works fine and so does using a VM with Lucid running on the same host prints fine too from anything.
Can't see any other comments about this problem anywhere but I know the printer is fairly common and has worked well with Linux in the past.
Using it with IP printing on port 9100 and allow the installation to detect and select the driver. Not setup anything clever and I have the same issue with a Lucid upgrade to 10.10 or a clean install. However the VM running Lucid prints fine. Must be something changed on Maverick somewhere.
View 1 Replies
ADVERTISEMENT
Jan 7, 2010
When I try to print in Openoffice, whether it be buy the File menu, or the print icon, or the keyboad shortcut control-p, it always freezes and I have to force quit. This is very annoying; what can I do?
View 3 Replies
View Related
Apr 24, 2010
I have a weird printing issue with OpenOffice.
When I print from OpenOffice Writer, some characters are replaced by random characters. For example, this morning all capital "I"'s were replaced by "�" (German special character), a "J" was replaced by "t", and so on. But not all characters are replaced, most are correct.
In addition, the top of the documents are cut off, as if there is an overly wide top margin where the printer cannot print.
I exported the document to PDF and printed from Acrobat Reader, and everything was fine. No problems!
I'm running the Lucid release candidate (but the problem has bugged me for a while now), with a Brother HL2030 printer.
View 2 Replies
View Related
Jul 10, 2011
In general, OpenOffice is quite buggy. My latest problem has been printing. I have this .dot file. When I print it to a networked printer, the document never prints. However, these work:Print to PDF. Printing to a file, transferring the file to the destination machine, and printing it works. Transfer the document. If I print the document directly on the destination system using LibreOffice, it works fine. Printing a web page. This works fine. Since I have a workaround, it's not so crucial that this be fixed. I'm just venting .
View 2 Replies
View Related
Apr 8, 2010
OpenOffice 3.1 is extremely slow to print. One page of labels takes 20 minutes.
This is only with Openoffice. All other applications print without difficulty.
View 2 Replies
View Related
Apr 9, 2011
I am using LibreOffice 3.3.2 Final on a 10.10 Ubuntu Laptop.Everything I print from LibreOffice and Openoffice is printed ~2 cm too high. Printing from other programs as Document Viewer and GIMP is just fine. It's not a settings problem, Ive checked everything hundred times. I am printing on HP Deskjet connected to a wireless router with CUPS 1.4.4 Driver.
View 1 Replies
View Related
Oct 13, 2010
I recently upgraded from Lucid Lynx to Maverick Meerkat and my OpenOffice.org Impress presentations' sound is not working. I don't have any issues affecting sound in other applications.
View 4 Replies
View Related
Aug 31, 2010
I'm trying to print a spreadsheet from Openoffice 3.0.1 (Xubuntu 9.04), I'd like to use the A3 pagesize but the Print dialog shows only A4 and Letter.. Other applications work fine.
The printer is a Ricoh Aficio MPC2000.
View 1 Replies
View Related
Dec 8, 2010
Maverick (64 bit) will suspend to RAM on my desktop computer immediately after I boot it up (before I start working). But after I have some programs open, it always fails to suspend. I get the typical blinking cursor in the upper right corner of a black screen. Then, after 20 seconds, the screen comes back on. The logs contain a message that "Freezing of tasks failed after 20.01 seconds." The problem task is usually listed as gnome-panel. Sometimes other tasks are listed too (such as Nautilus). Why will gnome-panel allow me to suspend soon after booting up, but not allow suspend after I start working with applications? I am not changing anything in the panel. And deleting the applets I have installed (system monitor and hardware monitor) doesn't make any difference - the problem continues. As I said, sometimes Nautilus is listed as the task that refuses to freeze.
If I switch users, I can suspend. I assume switching users just puts me in the "clean" state I have with my own user after booting up, so this doesn't really tell me anything new. I have searched all the other threads I can find. Most of the extensive suspend debugging threads are either from the 2007 era or they deal with laptops or resume issues. My issue is failure to suspend on a desktop. As you can see from the logs, I've been working on this for a month already!
Here's a typical error message:
Nov 7 01:52:59 MyComputer kernel: [ 1625.221296] Freezing of tasks failed after 20.01 seconds (1 tasks refusing to freeze):
Nov 7 01:52:59 MyComputer kernel: [ 1625.221374] gnome-panel D 000000010001fdc2 0 1925 1853 0x00800004
Here's an example log showing 2 tasks that fail to freeze:
Code:
Nov 9 01:25:09 MyComputer kernel: [16615.765114] PM: Syncing filesystems ... done.
Nov 9 01:25:09 MyComputer rtkit-daemon[1738]: The canary thread is apparently starving. Taking action.
Nov 9 01:25:09 MyComputer kernel: [16615.767512] PM: Preparing system for mem sleep
[code]....
View 9 Replies
View Related
Nov 21, 2010
I need to set the resolution of my display to 96 dpi.
The command that used to work was
$ xrandr --dpi 96
In Maverick, this gives me
[code]....
View 3 Replies
View Related
Sep 3, 2010
Running openSuse 11.3 32 bit clean default install with a HP 2575xi connected via USB. Sometimes, printing fails halfway through the last page. The following shows in the CUPS error log file:
Code:
D [03/Sep/2010:17:15:15 -0400] [Job 30] Process 21943 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=2..."
[code]....
View 1 Replies
View Related
Jan 21, 2011
When ever i try to open a document or even just a blank page with openoffice I get this message from the automatic bug reporting tool
Package: openoffice.org-impress-1:3.3.0-19.2.fc14
Latest Crash:Fri 21 Jan 2011 05:50:48 PM
Command: /usr/lib64/openoffice.org3/program/simpress.bin -impress
Reason: Process /usr/lib64/openoffice.org3/program/simpress.bin was killed by signal 11 (SIGSEGV)
Comment: None
Bug Reports:
I run Fedora 14 64 bit gnome desktop
View 2 Replies
View Related
May 23, 2011
System : Debian squeeze, Gnome, amd64Printer : Samsung ML-1640 SeriesDriver:Samsung ML-1640, SpliX V. 2.0.0Printer works, but printing a pdf file from evince fails ( nothing is printed )...http://localhost:631/jobs/ shows : "/usr/lib/cups/filter/pdftoraster failed
View 12 Replies
View Related
Nov 16, 2009
recently i have upgraded my centos 5.0 or 5.1 installation using 'yum upgrade' to centos 5.4 since the upgrade I am unable to print any PDF files as landscape, they get printed but do not seem to be rotated and are aligned a little bit less than when using portrait (test using the GUI and LP)
when printing a text file in portrait and landscape everything goes well tested on labelprinter Brother QL-580N and tested on Samsung SCX-5530FN Laserprinter both using the network I already tried 'yum downgrade cups' this works but with no success
View 1 Replies
View Related
Oct 12, 2010
I upgraded from 10.04 to 10.10 Worked fined, but suspend doesn't work anymore. When I click suspend, a tty1 terminal screen appears, exactly as you would hit ctrl+alt+F1, with the exception that no input is possible. I'm a newbie and an Ubuntu fan but I absolutely have no idea how to solve this...
View 5 Replies
View Related
Apr 13, 2010
on the risk of starting another OO thread I would like to share my problem to resolve it... (found this 'challenge' nowhere on the forum) installed openoffice apps on my F11 64-bit box through add/remove software until some time ago everything worked well for all users now with one specific user OO hangs upon startup when opening a file (only displaying splash screen, nothing further). this user is nowhere blocked intentionally
to resolve I did:tried other users, all works well (starting from menu, opening files in Nautilus by double-click) renamed ~/.openoffice.org to ~/.openoffice.org.bak so new prefs are created, but new attempt results the same (freeze upon start) copied ~/.openoffice.org from well-run user, but new attempt results the same (freeze upon start)
installed gnumeric as an alternative but I like to bring this to a happy ending.giving enough eyeballs the solution must be out here somewhere
View 2 Replies
View Related
Jan 9, 2011
I have installed openoffice.org-base and openoffice.org-base-core in an updated fedora 14 environment. Clicking on openoffice-base in applications->office->openoffice-Base fails to lauch with the message:"This operation is not supported onhis operating ystem."Installation of mysql and mysql-server does not help.
View 14 Replies
View Related
Feb 14, 2011
I recently upgraded to Fedora 14, and was surprised to find that OpenOffice is not included in the distro like it was in previous versions. Anyways after installing it it was working until while ago when I downloaded the recommended updates, and now when I try to start it, nothing happens.
View 2 Replies
View Related
Jan 8, 2010
I can't print via our network printer (HP DeskJet 3650) which is connected to a WinXP PC on the network. My laptop is wireless connected to the network. My distribution is openSUSE 11.2 and I tried setting up the network printer via CUPS:
Went to http://localhost:631
Add Printer
Device: Windows Printing via SAMBA
Device URI: smb://UMBRELLA/SMOKE/HP3600
Make: HP
Model: HP DeskJet 3650, hpcups 3.9.8 (en)
Printer State: idle, accepting jobs, published.
Then clicked the "Print Test Page" button. At this point the printer actually starts making sounds.. the same sounds it makes when it's preparing to print something. But then, it stops. The printing job is still present in the printer queue at the WinXP PC, but it won't print.
So I looked at this documentation: [URL]
Step 2 from this documentation tells me to install a PPD file.. which I can't find anywhere. It's not on the original HP driver CD, neither can it be downloaded from this page: http://www.openprinting.org/show_pri...P-DeskJet_3650.
Also, I believe I have everything installed:
Code:
serrano@saibot:/usr/share/cups/model/HP> rpm -qa hplip hplip-hpijs foomatic-filters
hplip-hpijs-3.9.8-3.4.1.i586
foomatic-filters-4.0.1-2.1.i586
hplip-3.9.8-3.4.1.i586
View 11 Replies
View Related
Nov 11, 2010
I am able to login to the system. code...
Are there any logs that you would like me to post?
I have tried reinstalling the NV display driver via "additional drivers" in the live CD, but they do not appear to be being retained on the HD version of Ubuntu. When I go back into the live cd the driver is not installed.
How can I switch the proprietary driver back on in the hard disk when I am running the live disk.
Is there a repair system program?
If not is there a way of forcing an upgrade on an upgraded system so that missing files are reinstalled?
If that does not work what should I do next to get the GDM to load?
View 1 Replies
View Related
Dec 27, 2010
It would appear that novell openoffice 3.2.1.4 on opensuse 11.3 fails to correctly import pps/ppt files. Slide transition data is lost and this results in presentations without sound. This problem does not exist in openoffice from openoffice.org. openoffice from openoffice.org will play pps files with sound which will not play with openoffice from Novell. However the openoffice.org version requires JMF.
JMF is old and 32 bit. I have tested openoffice 3.2.1 from openoffice.org with JMF on a 32 bit 11.2 system and it works. I assume that JMF will not work with a 64 bit JRE. I also assume that it would be difficult to get a 32 bit jre to work with a 64 bit openoffice FMJ is an alternative to JMF. It plays various types of audio including mp3 and wav. It is packaged for installation on 11.3. Does anybody know if this works in place of JMF with openoffice from openoffice.org on a 64 bit system?
View 9 Replies
View Related
Mar 28, 2011
Unusual problem here -I'm posting in hardware as I'm not certain where it fits.Home laptop (mainly wife's in use) upgraded from 11.3x86 last week to 11.4x64, pretty much everything is awesome.However, when she attempts to print a PDF with multiple pages per sheet (study notes),
View 3 Replies
View Related
Nov 1, 2010
I am trying enter a VLOOKUP formula in Sheet1, where the array is in Sheet2. For both the items, I have used mouse to enter cell references, which I always do.
1. Search criterion has been entered as a range, which is different from previous versions and not a very comfortable situation.
2. array reference completely missed entering Sheet2! in front of A1:C13. Only way out of this is manually entering the sheet name, which is not only cumbersome but also ludicrous. Moreover, we never had to do it like this in the past. I am using OpenOffice.org 3.2.1 in Ubuntu 10.10.
View 2 Replies
View Related
Mar 14, 2009
Apologies if this was asked before -- I have googled the last bytes out of my Firefox but fail to find anything helpful. Here's my problem:I have a foomatic hpijs cups-driver for a HP Inkjet (Non-PS printer) installed. Printing from UNIX-hosts works. I have cups configured not to allow raw-printing (/etc/cups/mime.types: #application/octet-stream, /etc/cups/mime.convs: #application/octet-stream).I have now installed samba-printing, the cups PS-drivers plus the Windows PS-drivers are populated to /etc/samba/drivers/W32X86/ and get pushed to the WIN-Client.Problem is that when I print from a WINXP client, the printer outputs heaps of Postscript-text instead of my page.I have tried to debug this a bit but fail to find anything really useful. My observations so far:
- The samba-pushed HP_Photosmart_3300.ppd (in both /etc/samba/drivers/... and in the resulting dir on the WINXP client) reads:
*cupsFilter: "application/vnd.cups-postscript 0 foomatic-rip"
[code]....
View 2 Replies
View Related
Feb 20, 2010
i am facing a problem with my pc in lab. i have a konica minolta printer which is running in redhat9. Now a day pc is showing some errors (hardware related). So i want to upgrade my pc.
How can i upgrade the system with its existing softwares.Because it contains some special softwares which control the printer with its LCD touch screen. This product has been discontinued on January, 2006 .
View 3 Replies
View Related
Jul 26, 2010
I have a printer Konica Minolta Bizhub DI350/DI350, I want to installed on Centos 5.5.
I try cups but I don't see drivers for this model even on their site.
Does anyone have been setup this printers on Linux RedHat/Centos or Ubuntu?
View 1 Replies
View Related
Aug 2, 2010
I am trying to install a Konica Minolta 2430 DL printer from a computer using the Mepis I believe I'm using 8.5. I would have to restart the computer to find my version and then I would loose this page.
I downloaded magicolor2430DL-1.6.0.tar.gz to /opt and have been trying to install it every since. CUPS will not install the minolta 2430. I am doing this across the internet because that is how my computer club has the printer set up. Through the ethernet. I have pinged and fingered. It can find the address for the printer. That is not my problem. My problem has been library files it couldn't find. Got those. Then jbig. Got that. Now I am getting this print out when I do a ./configure.
root@mepis1:/opt/magicolor2430DL-1.6.0# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
[Code]....
View 11 Replies
View Related
Oct 21, 2010
I am trying to find a printer driver or PPD file for the Konica Minolta Bizhub c200 network printer.
I am running Ubuntu 10.0.4 and we currently only have drivers available for Windows XP, however I do not have a PPD file available.
I have been trying for a while now to get hold of drivers but searching google did not return anything as yet.
Is there anyone out there that might be able to assist me in getting this printer installed on my notebook?
View 3 Replies
View Related
Jul 8, 2010
anybody found or wrote driver for Konica 7130 best 64bit
View 2 Replies
View Related
Mar 29, 2011
I have an older version of ggv on RHEL for viewing PostScript (.ps) files, but the binary I have refuses to open files from AFS. ggv-2.12.0 is able to open these files from AFS just fine on my Mac. I was not able to find packaged binaries for RHEL 5 or 6 for ggv-2.12.0, so I downloaded the source and compiled it. Unfortunately, it fails to start, printing these error messages:
[code]...
Does anyone know the fix? Or alternatively, is there another good and well-maintained PostScript viewer for Linux?
View 3 Replies
View Related
