Hardware :: Possible To Load Debian In Ibm Blade Server
Sep 8, 2009I have a IBM BladeCenter HS21 and im planning to load debian lenny.pls let me know it is possible to load debian in ibm blade server.does ibm support debian i386.
View 5 Replies
ADVERTISEMENT
Server :: RHEL4.5 On Blade Server Not Booting After Install
Feb 11, 2010We have done an installation on a blade server (HP) for RHEL4.5.
The server have an HP smart array 2200 controller and during installation it can see the controller and disks just fine.
The installation completes up to the point where the system needs to reboot , however after the reboot it does not start up again and get stuck at the message: "Trying to boot from drive c:"
We used the rescue option to mount the installation and cant find nythign wrong, even with the grub setup (except that it points to hd96 as its primary disk). we tried changing this to hd0 as well but still no luck.
After about 3 installations we are still not having any luck.
General :: Install Web Service Server On Blade System?
Jun 30, 2011I need to install a webservice server coding in java & running in JBoss AS onto a blade server with Linux OS. Anybody knows what way to make use all the power of that blade? Or just install it as install on other system? In my point of view, there are two ways I could do: Implement a webservice "server" which accept the incoming request, and then deliver to its "client" webservice. So we would run one instance of server and many instance of client. Other way is just improve the current implementation, accept incoming request and try to use multi-thread as many as possible to maximum the performance of the blade server.
View 1 Replies View RelatedDebian Installation :: Sparc On A Sun Blade 2500 Workstation - Does Not Boot
Feb 7, 2011I am an intermediate linux user. However, I know nothing about solaris. I am trying to install Debian Sparc on a sun blade 2500 workstation. I was told it should work. I am able to go through the debian installation process but when the box reboots it does not boot into Debian. I have now gone through the debian install process several times and now it saids there are too many primary partitions. I tried a rescue install but it saids there are no partitions installed on disk? What am I doing wrong? I am curious if I need to pass a specific argument at the command line to boot into silo? I cannot find any relevant guidance online about this problem and I cannot believe I am the only one to stumble here.
View 1 Replies View RelatedDebian Installation :: No Init Found When Booting From CD (on Sun Blade 2500)
Jul 7, 2011When trying to install Debian 6.02 from a boot cd, the boot halts with the error message Kernel panic - not syncing: No init found. Try passing init= option to kernel. In looking for a solution I see a great deal about this problem occurring after messy upgrades and the like, but when when booting from a cd downloaded right from the debian website.
View 3 Replies View RelatedUbuntu Servers :: What Is Distro For IBM JS21 Blade
Mar 3, 2011i have a IBM IBM BladeCenter 8677-3RU it currently doesnt have any ISO installed on the chassis since i dont know what to installed into it. The blade has 14 JS21 2 X 2.7GHZ PROCESSORS 2-socket single-core 64-bit PowerPC 970MP
View 2 Replies View RelatedHardware :: Sandisk Cruzer Blade Not Recognized?
Jun 25, 2011For some reason my Sandisk Cruzer Blade 8GB is not being recognised in Mint 11.It did work for a short period but no longer does so.Is there some command line I can use to search for it ?it simple as I am in the Newby category as far as Linux is concerned.
View 9 Replies View RelatedGeneral :: Apache On RedHat - Can't Get Blade B To Start?
Jul 27, 2011both blades are running RedHat 4 (nahant update 4). Blade A returns Linux 2.6.9-42.ELsmp to the uname command and apache starts up without issues. Blade B returns Linux 2.6.9-89.ELlargesmp to the uname command and fails with the following error: Cannot load /opt/httpd/03/modules/mod_access.so into server: /opt/httpd/03/modules/mod_access.so: cannot open shared object file: No such file or directory
I have confirmed that the modules are present (actually a symlink to a valid directory) and have the correct permissions. Why can't I get Blade B to start?
Programming :: Calculate The Blade Offset In Python?
Dec 30, 2010I'm using pyqt3 for my app and am lost on even how to attempt this task... On a vinyl cutter to have the blade pivot it must be offset from the center of the shaft it's on so say for example a .25mm offset would leave a .25mm unwanted vinyl attachment when the cutting is done. I somehow have to average or extrapolate that .25mm xy coordinate and add it to the hpgl plot file as a PUx,y; command? I have enclosed a simple sample file that has three images in it. In the corresponding hpgl file everything between the PU commands that are starting with PD are the code for that image (star for eg the pu to move to next image and then all PD for the next image and so on, so once the formula or procedure is figured out it can be applied to as many images there are in the file. Placing the new command at the head of each image PD group. Since there are absolute and relative cutters I enclosed the same exact plot for both types as the coordinates on relative can be negative numbers. Only PU and PD commands and a ";" as a command delimiter as sometimes many commands are on one line.The offset variable will come from a spinbox but .25 is good for an example.
View 14 Replies View RelatedUbuntu Installation :: Sparc Blade With Large Vertical Stripes On Screen?
Jun 29, 2011I've got 10.04 installed on my Blade 1000 workstation. Installed 6.06 first and worked my way up as per other postings. See attached cookbooks I wrote. Framebuffer is Elite3D-lite, and I have done the afbinit install. Using Xorg w/ Gnome and other windowing software to eliminate the possibility it is Gnome. From what I understand, Ubuntu does not require a custom X11 conf file like OpenBSD.
Current screen output shows large vertical stripes, where the stripes overlay on top of the GNOME desktop. Inside the stripes are the prior boot screen output of Ubuntu 10.04. When the screen saver kicks in, the Gnome desktop disappears, but the blue 10.04 stays visible. Mouse cursor moves across the screen, under each stripe as it goes.
My knowledge of framebuffers is limited. Would this then imply that the framebuffer is not fully "refreshing"? The screen does not provide full width even though the correct OpenBoot monitor configuration is set. Haven't found any mention of this issue from other Ubuntu/Linuxes Sparc users. Attached the X11 log. Looking at the log, I suspect this will need a custom X11 config file.
CentOS 5 Hardware :: Drive Not Found Error (HP Proliant Blade 460c G6)?
Sep 22, 2010Im trying to install CACTI EZ on a HP Proliant Blade 460c G6. But im having problem with detecting the hard disk. CACTI EZ installation has the drivers for this and loads the driver itself. But when it now detects for the drive, it has the error "Drive not Found".Do you have bootable CD (iso image) that can load the drivers for Cent OS 5 for HP Proliant Blade 460c G6 server.
View 1 Replies View RelatedCentOS 5 Server :: Improve Server Speed On Servers With Heavy Load?
May 4, 2009There is a tool appeared in repository called ktune; The purpose is to adjust some sysctl.conf settings to improve server speed on servers with heavy load. What is this tool for if one can achieve the same with the configuration file added to system startup? Or ktune is just such file?
View 1 Replies View RelatedServer :: Unable To Load Redhat 9 Server After Disk Recovered?
Mar 13, 2011I got this type of messages:k journald starting. commit interval 5 seconds.EXT3.fs:mounted file system with ordered data modefreeing unused kernel memory : 212 k freed.Warning:unable to open an initial consoleAfter this Server is not hang state but stay at same Anybody can help me how to resloved this type of issue.
View 1 Replies View RelatedServer :: Abrupt Increase In Server Load Upto 300?
Sep 19, 2010I run a server with nginx at the front and apache at the background. Nginx serves as a reverse proxy in here. As there were lots of DOS attacks, I have implemented Deflate-DDOS, APF and Nginx anti-ddos features and the server runs without a problem. Once every month, the load on server increases upto 300 and I receive an email like this :
Subject : Cron <root@server> [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm
Content :
find: `/var/lib/php5/sess_0ca40520ac8ecb66090746f90da17516': No such file or directory
find: `/var/lib/php5/sess_3839b0cbf042934183d56ff682c948e0': No such file or directory
find: `/var/lib/php5/sess_dec1ed8ea1f62caf7a42a29b9f82c506': No such file or directory
[code]....
There's more that 100,000 ( I suppose ) lines on this email. I have no idea what the problem is. It seems there's something with the session, but I really don't know what it is.
Server :: Oracle Server Load Avg
May 8, 2011I am not an oracle DBA, but need to find the cause of high load avg, even after adding more CPU power the load avg is the same.
Old and new servers load avg is the same (between 6-10 peak hours and 3 to 5 during off-peak hours) no difference. I expected the laod to come down as we added more CPUs.Our DBA says queries are optimise.Can some Oracle DBA give some tips to find the cause.
Server :: Run A Script If The Server Load Is Above A Certain Value?
Jan 3, 2011I want to setup a cron job to run a bash script which which calculates the server load and if the load is above certain value(say 15) then stores highest cpu eating users list in to a file for that instant. I have a small script which lists users according to cpu usage.. But i dont know how to check the server load and if and only if its above 15.
View 12 Replies View RelatedServer :: Web Server Can't Load Mcrypt?
Jul 16, 2010I have a CentOS 5 server running Apache & PHP. When I load 'Phpmyadmin' on the server it worked fine however there is a message at the bottom of the screen that says:Quote:Cannot load mcrypt extension. Please check your PHP configuration.I checked to make sure that the 'mcrypt' package is installed on the server:
Code:
[root@ideweb1 ~]# rpm -qa | grep -i mcrypt
php-mcrypt-5.1.6-15.el5.centos.1
[code]...
Ubuntu :: Website Will Not Load - "server Not Found Firefox Cant Find Server"
Feb 9, 2011Having a problem on all of my Ubuntu machines when i goto this address: [URL]... i get a "server not found Firefox cant find the server [URL]... this is only happening on Linux i have a dual boot on an epc with vista and it loads the site. normally i wouldn't even care but my girlfriend will be taking on line classes here and i need to get this to load.
View 5 Replies View RelatedServer :: How To Load Tun In RedHat
May 9, 2010how to load tun in RedHat
Code:
uname -a
Linux server 2.6.18-028stab067.4 #1 SMP Thu Jan 14 17:06:11 MSK 2010 x86_64 x86_64 x86_64 GNU/Linux
Server :: Load Balancing Between 2 VMs?
Oct 15, 2010host - ubuntu 1004 desktop 64-bit
VM1 - ubuntu 1010 LAMP server 64 bit (without X)
VM2 - ubuntu 1010 server 64-bit (without X)
Virtualizer - Oracle VBox
point me the URL in respect of guides/howto to set up load balancing between 2 VMs, to sync VM1 to VM2. Google search on "howto load balancing linux lamp server on vbox vm" found follow; How to configure a low-cost load-balanced LAMP cluster [URL]
Debian :: Cannot Get Ff To Load Anymore
Jun 23, 2015I cannot get Ff to load anymore. It had been working perfectly. Nothing happens from icon click.When I try to load from terminal I get the following error message.
(process:1767): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
Could not create gnome accelerators directory `/home/bren/.gnome2/accels': Permission denied
Debian :: High Load Always
Sep 15, 2015I have a debian system with the following version you can se bellow. My problem is that one one single core of 4 it's running 100% all the time and i cant seem to find out why. The load is also high(load average: 0.91, 0.75, 0.40) because of this. This keeps happening even after reboots. The system if freshly installed twice and the same problem occours as soon as it boots. Something called kworker is running and causing the load / CPU load, is that normal for a fresh install??
root@Cyberdyne:/# lsb_release -da
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 8.2 (jessie)
Release: 8.2
Codename: jessie
Debian :: Pandora Does Not Load.
May 17, 2011I am new to Debian this is my first day. Pandora does not load. It does on a separate Mint computer. What do I need to fix?
View 5 Replies View RelatedUbuntu :: Cannot Get GUI To Load In Debian
Apr 7, 2011I just installed Debian 6 with the Graphical Desktop Environment on an EeePC, and for some reason, the graphical desktop environment does not load: It goes straight to a terminal.
View 1 Replies View RelatedUbuntu :: Load Up The Server Addition Onto The Other HD?
Feb 28, 2011I have two HDs onboard (150GB each) one is running the desktop version. Possible to load up the server addition onto the other HD? Would like to learn the server version, but not sure this is possible or will cause issues.
View 3 Replies View RelatedServer :: Apache Load VERY High - How To Fix It
Apr 2, 2011on an old server of mine, as soon as apache is started, the load average that I get to see with 'top', that normally is under 1, now just steadily climbs up and up to easily 150, in fact disabling the webserver from serving any webpage. I've checked netstat, and I'll try to upload the output. The ip's that are in there I've blocked with iptables. But that doesn't help or so it seems. I see nothing weird in the error logs. As soon as I stop apache, the load goes back to normal. As soon as I (re)start it, up it goes again. What can cause this and how do I get rid of it?
p.s. It's an old server, fedora3 or so, and I've got a new one to which I'll transfer the domains, but until that's completely done, I'd like this one to run as it has for years...
Server :: Load Average Is High
Dec 14, 2009The load average is almost 1.06, but cpu is not 100% utilized... I am just wondering why load average is 1.06 in that case still ? (well i monitored cpu for long time, it never exceeded above 40%)can anyone explain the reason behind it ? Also is the system over utilized in this case ?
View 3 Replies View RelatedServer :: Optimizing Apache2 Load?
Jul 23, 2011I would like to ask how can I optimize apache2 load on my dedicated server. I am hosting Facebook applications on it, but most users will get a Timed Out message when they try to access it. I was tinkering with MaxClients directive in apache2 config, and it got better, but still it's not best. Programmers are trying their best to optimize the applications at their side, but I am afraid this is an server issue.
View 2 Replies View RelatedServer :: Program To Check Cpu Load?
Jul 28, 2011my server get hanged when ever their is loading problem. i wanna a program to get cpu load and also when load get high from a specified load value it should restart service. is their is any programm or how to write that programm..
View 12 Replies View RelatedServer :: Starting Ms Vpn PptpdFATAL: Could Not Load?
Feb 16, 2010I'm running Linux Suse 11.2.When I start the ms vpn server the following error occurs:starting ms vpn server pptpdFATAL: could not load /lib/modules/2.6.31.6-0.1-desktop/modules.depWhen i go in to that directory, the directory doesn't exist. But there is only one directory called 2.6.31.12-0.1-desktop hen i copy and change de directory to 2.6.31.6-0.1-desktop it doesn't work But something is strange... I have an other server (virtual) and the vpn server works and the same directory 2.6.31.6-0.1-desktop doesn't exist.
View 1 Replies View Related
