Ubuntu :: Cannot Get GUI To Load In Debian
Apr 7, 2011I just installed Debian 6 with the Graphical Desktop Environment on an EeePC, and for some reason, the graphical desktop environment does not load: It goes straight to a terminal.
View 1 Replies
ADVERTISEMENT
Debian :: Cannot Get Ff To Load Anymore
Jun 23, 2015I cannot get Ff to load anymore. It had been working perfectly. Nothing happens from icon click.When I try to load from terminal I get the following error message.
(process:1767): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
Could not create gnome accelerators directory `/home/bren/.gnome2/accels': Permission denied
Debian :: High Load Always
Sep 15, 2015I have a debian system with the following version you can se bellow. My problem is that one one single core of 4 it's running 100% all the time and i cant seem to find out why. The load is also high(load average: 0.91, 0.75, 0.40) because of this. This keeps happening even after reboots. The system if freshly installed twice and the same problem occours as soon as it boots. Something called kworker is running and causing the load / CPU load, is that normal for a fresh install??
root@Cyberdyne:/# lsb_release -da
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 8.2 (jessie)
Release: 8.2
Codename: jessie
Debian :: Pandora Does Not Load.
May 17, 2011I am new to Debian this is my first day. Pandora does not load. It does on a separate Mint computer. What do I need to fix?
View 5 Replies View RelatedDebian :: Load On Idle System
Nov 2, 2015I had noticed that my workstation (running debian testing) is having a constant load of about 0.9 (+/-0.1), even while the system is completly idle.The system starts with a normal load and then goes up to about 0.9 within a few minutes and then will stay there forever (well it can get higher, but never lower). This is the load graph after the system runs some time: URL....
I have tried everything I know to find the cultprint but there is no cpu usage and no io usage. I even have disabled the desktop and still have this problem.Also I have tried booting an older Kernel (4.1 and 3.16) with no difference in the load.Here is some information about my system:
Code: Select all» uname -a
Linux localhorst 4.2.0-1-amd64 #1 SMP Debian 4.2.3-2 (2015-10-14) x86_64 GNU/Linux.
Debian :: When Run An Application Is Slow To Load?
Sep 1, 2010I have debian lenny, when I run an application is slow to load (example: iceweacel open and it takes, I can hold him iceweacel work normally), I tried to change from gnome to another and the same thing, went down some services (samba, squid) and nothing. I open a terminal and it takes, I want to duplicate it and do it fast. From a terminal without X (tty1) with root run mc and moves quickly, also run as root "sudo mc" and takes to boot.Any action done with sudo it takes to run.Can not be what it takes to make starting the applications, not the PC because it is new, and from one moment to another I began to pass this
View 2 Replies View RelatedDebian :: Webpages Doesn't Load?
Apr 1, 2011I use Debian 6. I noticed that when ever I try to open certain websites, the pages doesn't load at all. This happens when I try to open [URL] and certain other web pages. Browsers like chrome, epiphany, iceweasel, opera all had the same issue. The download speed is pretty normal. note that disabling ipv6 inside the browser configuration didn't help fight this issue.
View 8 Replies View RelatedDebian Installation :: Sed Apt Get And Installed Kde And X Org They Don't Load?
Dec 25, 2010ok I used apt get and installed kde and x org they don't load right but I'll try reconfiguring them and post if i still have troubleI just got Debian to install after a lot of attempts using a v506 DVD set, a 507 net CD, and a 507 kde cd1. The 507 Cd's never made it past the installing the core packages part. The DVD set decided to work this time but the select and install software part failed. I now have a working terminal and would like to install kde and the other Debian packages that come with it. What would be the best way to do this without rerunning the installer off the DVD?
The DVD's worked fine last month when I setup a friends laptop, so I'm thinking I have a bad DVDROM drive or have some how ruined the disks. more likely a bad drive given the newer CD wouldn't work.edit:I'm running a Compaq Presario SR1710NX Desktop PC (AMD Sempron 3400+ Processor, 256 MB RAM, 100 GB Hard Drive, CD-RW/DVD-ROM Combo Drive)also the Debian live CD works just fine on my system I just can't install from it
Debian :: Nvidia Module Sometimes Won't Load
Jul 25, 2010I'm fairly new to Debian, but during the past I've used Mandrake, Slackware and Ubuntu. Few months ago I've migrated from Ubuntu to Debian - I like it a lot but there is one thing which keeps bugging me.Sometimes - one of the few boots - nvidia module won't load and GDM won't start. During the "bad" boot system freezes for a while after the message "PME# disabled" and gives the message about nvidia GPU not supported. Because of that GDM fails to start.Below are the boot logs (without the leading time for easy diff comparison) - the "bad log" when nvidia fails to load and the "good log" when everything is OK. Any help?
View 14 Replies View RelatedDebian Configuration :: Load Balancing Over Two ISP
Oct 16, 2015I'm trying to set load balancing over 2 ISP link on a router / firewall running Debian Jessie.
There are iptables rules for balancing and forwarding:
Code: Select alliptables -t mangle -A PREROUTING -j CONNMARK --restore-mark
iptables -t mangle -A PREROUTING -m mark ! --mark 0 -j ACCEPT
iptables -t mangle -A PREROUTING -j MARK --set-mark 10
iptables -t mangle -A PREROUTING -m statistic --mode random --probability 0.5 -j MARK --set-mark 20
iptables -t mangle -A PREROUTING -i $wan1 -j MARK --set-mark 10
[Code] .....
There are iproute2 rules:
Code: Select allip route add 172.20.0.0/24 dev eth0 src 172.20.0.150 table WAN1
ip route add default via 172.20.0.254 table WAN1
ip route add 192.168.0.0/24 dev eth1 src 192.168.0.150 table WAN2
ip route add default via 192.168.0.254 table WAN2
[Code] ....
The packets marked as 20, theoretically routed via table WAN2 via 192.168.0.254, are lost.
The WAN2 gateway is working if I set as default without balancing.
I disabled the rp_filter module on all interfaces and I installed xtables-addons-dkms.
I also try this but I had trouble with forwarded connexions.
Debian Configuration :: CPU Does Not Scale Down When Under Low Load
Dec 28, 2015I would like my CPU to be overclocked, while retaining frequency scaling capabilities. The CPU is a Core2 Quad Q6700, with a stock speed of 2.67 GHz. In my BIOS, I can manually increase the FSB, but if SpeedStep (EIST) is enabled, the increased FSB is ignored by Linux, and the max speed remains 2.67 GHz. If I disable SpeedStep, then the CPU successfully runs at the higher speed I would expect, but does not scale down when under low load. As it is now, I am only running it at 2.8 GHz.Does CPUFreq *require* SpeedStep to be enabled in the BIOS?
View 13 Replies View RelatedDebian :: Load Up Initial Boot And Goes Into CLI
Jul 27, 2010Uptill today, my computer was dual-boot Debian Lenny with an upgraded kernel and Windows 7 Home Premium. My laptop has two hard drives, HDA and HDB. Windows was on HDA (original install from computer purchase), while my Debian partitions were on HDB. I used Grub for the dual-boot, and both OSes worked just fine. Then today I decided I wanted to kick Win7 for good. So I made a backup image (just in case), booted Slackware 13.1, used CFdisk to wipe HDA (which Windows did NOT make easy to do), then installed Slackware on HDA (there's a reason why I wanted both, but thats irrelevant to the question). After the install, I put Slackware's LILO bootloader on HDA (where GRUB was before I wiped the drive for Slackware), manually configured it to load the bootable partitions for Slackware and Debian, and restarted.
First, I went into Slackware. and Slackware works just fine. Then after I was done in there, I rebooted and went into Debian. This is where the trouble started. When I had Windows on HDA, Debian booted just fine, didn't even start in CLI, went straight into KDE. Normal install in every way. Now, after adding Slackware, it loads up its initial boot and goes into a CLI. I can do the regular CLI stuff, like navigating directories and logging into user and root. But typing startx just gives a bunch of errors saying that X can't start. How the Slackware install could have affected Debian in this way.
Debian :: How To Load Graphic Screen
Mar 8, 2011I just loaded Debian 6 and it loads to a text screen. How can I load the graphic screen
View 3 Replies View RelatedGeneral :: Debian 507 Won't Load On Thinkpad T20?
Dec 28, 2010I have an old laptop I bought for $20 & thought I'd install Linux & XP in a dual-boot. It couldn't handle the MINT installer, so I thought I'd go with Debian. XP was already on there, so I ran the Debian install CD (LXDE), set up the 2nd partition, and finished installation. It rebooted once, but since then will not load Debian.
I get the GRUB menu, pick the default (not single user), it runs through all the lines of text down to the block that says "starting gnome display manager gdm" & maybe 4 lines after that (which I can't read in time)... then the screen goes blank, there's a brief flicker, the CPU thinks a bunch, and then there's usually a low-pitched BOOP at which point the CPU stops thinking & the screen just stays blank. The power is still on, but nothing happens.
Anyway, I don't know if it has an ATI card or whatever (saw something online alluding to that being a problem.) I also don't know how to use the single user mode, or how to display error messages, or do anything useful in the command line. Haha... But I'm a novice programmer & "computer literate" outside of Linux, so I can learn.
The laptop has 128MB of memory (which functions perfectly according to MemTest 86), I think a 450MHz PIII processor, 20GB HD (split between XP and Linux), a dead battery, a slightly damaged Power Supply, damaged screen...
Ubuntu :: Connection - Load A Website Taking To Long To Respond And Sometimes Doesn't Load
Oct 2, 2010When i open one of the web browsers i use and try to load a web site it's taking to long to respond and sometimes it doesnt load the website at all. I have tried with firefox,epiphany,opera with all the same results. I am sure that this is not a problem with my internet connection because i don't have these problems with windows.Also the network manager connection settings are correct
I also tried choosing the old kernel(2.6.32.24) to boot from but no success.The problem is the same as if i am using the 2.6.32.25 kernel. The strange thing is that i can download packages from synaptic with full speed. Last think.I have recently downloaded the recommended updates from the update manager but i don't remember what are the things that where updated.
Debian :: Alpine Will Not Load Remote Config?
Sep 28, 2010For the last week alpine has been refusing to load a remote config files using the command
alpine -z -p {imap.gmail.com/ssl/user=username@gmail.com}remote_pinercit just ignores the -p flagbut will work if alpinef is used (alpinef calls alpine set to use function keys for issuing commands).
Debian :: Incorrect Load Average Reporting In Top?
Jun 10, 2011installed squeeze, but top keeps reporting 0.00 most of the time, and def it's wrong cause we have another server same hardware but lenny, and its over 2.00 same load. what can i check or do to fix this? thx
Linux 2.6.32-5-amd64 #1 SMP Wed May 18 23:13:22 UTC 2011 x86_64 GNU/Linux
[Code]...
Debian Installation :: How To Get Grub To Load Windows
Sep 4, 2015i have installed debian but during installation my installed windows 10 was not found by the grubloader. i have installed windows 10 on my ssd and the debian on my hdd. nevertheless i installed the grub loader on the master boot record, because it said i could still configure it so it can boot both the windows and the debian.The debian installation is running fine. But i now want to boot the windows too. The problem is i have never worked with the grub loader yet and i am little scared that i will do something wrong.How can i get grub to load my windows ?
View 9 Replies View RelatedDebian :: How To Load RAID Drivers In Live 7.8.0
May 29, 2015I have some servers... more than 30 (different brands: HP, IBM, Supermicro, Fujitsu, etc).
I wonder if there would be some way (and how to do it) to load the RAID drivers in Debian Live 7.8.0 without installing it?
Debian :: Failed To Load Kernel Module
Jun 23, 2015I'vd a problem with loading modules. Booting gives the this error:
Code: Select alllucas@debian8-1:~$ systemctl --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
● systemd-modules-load.service loaded failed failed Load Kernel Modules
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
[Code] ....
Always the same error when booting. After a period of time, (Graphical User Interface) the mouse click no longer operates, also text input isn't possible.
I had no access to the system at all, even crt alt F1 stopped working, also text input was no't possible. so reinstall was the only option. Maybe there is a connection with this two errors.
I've reinstalled Debian 8 several times. Still, both errors stay.
The same happend again (in the GUI) is nothing possible, no txt input, no mouse click), but now I have access to the system, ctr/alt F1 is working.
Debian :: Grub If Only Booting / Only To Boot/load More Than One OS?
Nov 9, 2010I am using Debian Squeeze, having installed it after Windows 7, each on a separate HD.
What happened was that Win7 became unbootable and, after failing to recover it, decided to live without it.
After a (happy) week of Windows-free life, I'm wondering if I can safely remove GRUB ("Grub-pc" and "Grub-common" are installed) since, as far as I know, GRUB is there only to boot/load more than one OS?
Debian Configuration :: How To Load Driver Automatically
Sep 21, 2015I have PCI-device and driver for it - tmk1553b.ko
The problem is to make this device work i have to open terminal after system starts and write
Code: Select allcd /path/to/driver
sudo insmod ./tmk1553b.ko d0=1 t0="TAI" misc=1
But idea is that this PC will work without operator so driver must be loaded automatically. As i realized the solution is to make script but when i try google it shows me how and where to put this script but not how to make it. Also i've tried to put tmk1553b.ko to /lib/modules/2.6.32-5-686/kernel/drivers/misc but it doesn't work.
Debian 6.0.10 (squeeze)
Kernel 2.6.32-5-686
Debian Configuration :: OpenVPN - Cannot Load Tun Module
Dec 16, 2015I have recently rented a VPS server so I can run a VPN. Unfortunately, I did not get far in this [URL] ....., I have encountered this error:
Code: Select allxaver@xaver:/$ sudo modprobe tun
ERROR: could not insert 'tun': Unknown symbol in module, or unknown parameter (see dmesg)
So I googled this error and found this: [URL] ....., however response of mine VPS was:
Code: Select allxaver@xaver:/$ ls /lib/modules/uname -r /kernel/drivers/net/tun.*
ls: cannot access /lib/modules/uname: No such file or directory
ls: cannot access /kernel/drivers/net/tun.*: No such file or directory
Code: Select allxaver@xaver:/$ lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 7.9 (wheezy)
Release: 7.9
Codename: wheezy
xaver@xaver:/$ uname -a
Linux xaver 3.2.0-4-amd64 #1 SMP Debian 3.2.57-3+deb7u1 x86_64 GNU/Linux
Debian Configuration :: Grub Fails To Load From EFI?
Mar 8, 2011I have happily been booting debian through grub2 by chain loading it with efi (rEFIt), until today, and now get to begin another learning experience I've been using linux for a while, and kept seeing the guides for splitting up /, /var, /tmp, /usr, and /home, into different partitions, so I did just that when I switched from Ubuntu to Debian (I've realized that this was a little bit pointless because I formated them all as ext4, but at least it acts as a safety for mission critical drives when I overfill /home. I unfortunately didn't give /tmp enough space, and it kept crashing SimpleScan so I decided to use gparted to resize it.
The operation went alright as far as I can tell, and was straight forward because there was some free space behind it so I only had to append the partition. I synced the master boot record through rEFIt as usual, but when I booted the linux partition grub did load, and only a blank screen is presented. I eventually figured out I could use the gparted live cd to boot back into debian, and have been screwing around for a while with grub commands trying to figure out how to allow rEFIt to successfully boot GRUB on its own again. I ran grug-mkconfig to replace my /boot/grub/grub.cfg file and have rebooted but that did not help.
I tried reinstalling grub and grub-common with apt-get, but I didn't purge configuration settings for fear of losing something important. My current focus is on the command grub-install. I think i just need to run this command with the /boot device, like su - root; grub-install /dev/sda1 or some thing like that. wipe out the MBR on /dev/sda1, or screw up what good configuration is left in grub, so I want to make sure that I'm using the right /dev. Currently the gparted output looks like this:
/dev/sda1: fat32 - GPT (gpt from fdisk, gparted shows EFI with the boot flag)
/dev/sda2: hfs+ - MacOSx
/dev/sda3: ext4 - /root
[code]...
how the gnome live gparted disk would have been able to boot. I have access to a hard drive so I'll probably end up making backup images of as many of the partitions as I can, and then try more drastic bashing around, but if anyone has any suggestions/wisdom they could offer while I'm researching solutions I'd appreciate it. I eventually want to try to axe my osx partition and boot directly from GRUB2-EFI so I figure it is worth the investment in time to get to know grub a little bit more intimately.
Debian Multimedia :: Failed To Load X Using Xinit
Oct 9, 2015After regular upgrade (I am using Unstable) I boot my system today but failed to load X using xinit (which I always use). Using startx X loads but leaves it unusable, both mouse and keyboard don't work (I never use startx really as regular user but in root). The message is:
Code: Select allxf86OpenConsole: Cannot open /dev/tty0 (No such file or directory)
In my /etc/X11/Xwrapper.config I changed "allowed_users=console" to "allowed_users=anybody" and that doesn't work.
Debian Multimedia :: Gnome Does Not Load If KMS Is Enabled
Mar 8, 2010Gnome loads without problems when Kernel Mode Setting is enabled. Original message
Daily updated Debian Testing | Custom Gnome installation
Intel GS45 chipset | Intel GMA 4500HD graphic card
The title is rather vague because I haven't been able to identify the cause of the problem. I installed Debian Testing using the daily builds of March 6th and 7th with the same results: the system fails to load the Gnome desktop after the log in. Instead, a pale blue background is shown. No panels, no window manager, nothing. I can move the cursor but there's no context menu and the key bindings don't work, turning the session useless. The problem exists in all accounts, and persists even when the dot-files are deleted after the first Gnome start.
After trial and error, I found out that if I changed to a virtual console (VC1 to VC6) and go back to VC7 (sometimes VC8), the Gnome desktop loads as expected. The pale blue background is shown over/instead of the actual background and I need to cover ("paint") it with a window to show the actual one. This pointed me to a Gnome Session or a graphics card error. Indeed, if I disable Gnome Session, the Gnome desktop loads after the log in. Of course, no interface settings are set. I checked the Gnome Session's bug list without luck and the error messages in .xsession-errors aren't conclusive, for they appear in other cases.
About the graphics card: the video settings work (screen settings, 3D accelaration, recovery after suspend to RAM/disk) but Xorg's log shows several erros and warnings when setting up the system (mostly related to the video and touchpad settings). Right now, I'm building a custom xorg.conf file to try to decreases udev's errors and see if it affects the Gnome problem. I've spent hours trying to solve this problem. It's annoying to lose interface settings after closing the session (key bindings and brightness settings, for example).
Debian Multimedia :: Wbar - To Load Image ?
Jul 27, 2010I installed 1.3.3 + wbar dfsg2-1 it works almost correctly
I have a small problem on the second line of the file dot.wbar line is as follows
When I run the command "wbar - config dot.wbar" I get the message
With the parameter:
Debian Multimedia :: Cant Load PNG Image Extensions
Nov 3, 2010i cant load PNG image extensions..i dont know what to do.when i pressed the button printscreen of my keyboard the system shows me an error dialog:"Unable to save screenshot to disk:The type 'png' is not suported."what is the problem??i try to rebuild libpng and libjpeg, but i cant solve the problem.
View 3 Replies View RelatedDebian Multimedia :: Can't Load Graphical Enviroment
Apr 5, 2011I'm having problems installing Debian 6.0I can't load the graphical enviroment. I've tried the gnome and lxde but both of them freezes on screen.
View 1 Replies View RelatedDebian Hardware :: Gnome 3 Failed To Load?
Aug 21, 2014I've just bought this laptop Asus G750JZ with Intel Haswell i72.4 GHz and Nividia GTX 880. I have this problem with Debian: after i install the OS it says that Gnome 3 could not be loaded. I guess it doesnt recognize my video cards(Intel HD 4600 and NVidia 880). How to make Debian running in optimal condition on my laptop.
View 5 Replies View Related
