I have been waiting on installing ubuntu on my mid 2010 MBP 15' for a while now. I was wondering if the dynamic GPU switching was supported yet. Does Ubuntu recognize the intel card and can I use it over the nVidia card?
View 1 Replies
I'm running Ubuntu 9.10 on an older Compaq Evo D310. When I do a search of my video card I get "01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 Pro Ultra TF", which is the integrated card on the motherboard, but I'm actually using an Nvidia GeForce 2 MX 400. At least that's the card my VGA monitor is connected to. How do I get Ubuntu to recognize the Nvidia card? I'd like to try installing an nvidia legacy driver for it to boost performance. Thanks.
View 2 Replies View Relatedi bought a new laptopt Gateway, core i3, intel video card. I've tested ubuntu and mandriva without good video results. I have installed Fedora 12, i'm using an external lcd samsung screen on the vga port, it works fine. My display properties shows two screen as well as the correct resolutions...the problem it that i can't use my latopt screen, i have tried different resolutions..but nothing. I can't use mi laptopt without an external screen.Even if i boot without my external screen, my laptopt screen goes black.
View 14 Replies View RelatedI cannot get the restricted Nvidia drivers or the Nouveau drivers to work completely. If the Nouveau drivers are being used (after an "apt-get purge nvidia-*"), the text mode seems to work ok, but the X nouveau driver acts as if it cannot recognize the card. The only way I can get into X is to make sure I have the "nv" driver in the xorg.conf. I can then get into X normally.
If I install nvidia-current, the machine will just lock up at the splash screen. The Xorg.0.log file is zero bytes. I've checked and installing nvidia-current properly blacklists the nouveau drivers and I see no evidence in the messages file that the nouveau drivers tried to load in text mode. In fact, it shows the nvidia driver loading for console mode. I've tried the nouveau.modeset=0 kernel option as well, but that doesn't do anything. This is a fairly new nvidia card, maybe only a couple months old. I think it's been out for quite some time though. But it was working fine under Karmic with the restricted drivers. I really want to get this working as I need full support of the video card.
I recently tried to install the proprietary nvidia driver to my laptop, but after disabling nouveau have run into a problem. When I start X I get an error
Code: (EE) No devices detected
Fatal server error: no screens found
I believe the computer is trying to use the on-chip intel card instead of the nvidia card because "dmesg | grep video" specifies "pci 00:02:0: Boot video device", "lspci | grep 00:02.0" gives me "VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
I have googled this issue all day and have not found a solution that works for me. nvidia-xconfig does nothing as doesn't "nvidia-xconfig --multigpus=on". Is there a way to specify which video card my laptop uses on boot? Maybe which my xorg.conf uses?
I will try to add my xorg.conf file later on.
How is OpenGL support (specifically OpenGL 3.x) in the different video card drivers available for Linux?Assuming that the hardware supported it well, would the drivers be an issue?
View 1 Replies View RelatedI have a Sony Vaio vgn-sz440. Here is what the specs say about the video card.
[code]...
I do not understand, do I have an Intel video card, or an Nvidia video card? Should I install the Nvidia video card driver, because every time I try, everything gets real glitchy and I revert back to my original setup.
I have an old video card, Nvidia XFX 7800GT, which is now beginning to fail and I need to upgrade. I am not huge a gamer but I do play/buy games on regular basis. Right now I'm playing Eternal Lands on the Linux side. Looking to spend $100-$150 on a new card.I have a Core2Duo Wolfdale 3.0, with 2ghz ram and run Lucid 32bit. Also run windows Vista64Ultimate on dual boot (rarely).
I would love to buy a new ATI 5770 or 5830, ATI budget cards seem to be much better for the buck over budget Nvidia cards, but I'm concerned with ATI drivers and long term with Ubuntu.On the Nvidia side I'm considering the GTS 250. The only advantage I can find is lower power consumption with Nvidia and Ubuntu has always preferred Nvidia over ATI, as far as working drivers go.As Far as Ubuntu and Lucid is concerned, which way is best, ATI or Nvidia? Has anything changed with ATI support, that could make theor cards more compatible now and in the future?
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:
Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.
My Ubuntu Netbook Remix 9.10 on my Asus EEE PC 1000HE computer does not recognize SD card."sudo fdisk -l" command does not result anything related to SD card even when the card is in the slot.
View 1 Replies View RelatedMy Ubuntu 10.04 will not recognize my used cards at all. If it will not recognized them, I cannot format them.
View 5 Replies View RelatedMoving this to new topic, since it's no longer under wireless connectivity issues. [Noob Warning] I was having trouble getting Ubuntu to recognize my wireless card, as I have changed from the 3965 that came in my computer to the 4965, which added increased range and G band. Anyway, I read one of the threads on here, and this was the advice given:
Quote:
Originally Posted by pytheas22 First, download this file and save it to your desktop. Then run these commands:
Code:
sudo apt-get install build-essential
wget http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-5000-ucode-5.4.A.11.tar.gz
tar -xzvf iwlwifi*
sudo cp iwlwifi-5000-ucode-5.4.A.11/iwlwifi-5000-1.ucode /lib/firmware
bunzip2 compat-wireless-old
[Code]...
just installed ubuntu but it doesn't recognise my wireless card. I'm running an emachines g720. Ive tried looking through some previous posts but the terminal thing frightens me to death really.I've tried looking through the idiots guide but i'm afraid i'm a better idiot than that.
View 7 Replies View RelatedToday I deleted Windows on my Dell Latitude D610 and instead installed Ubuntu 10.04 on it (I had a cd with 10.04 on it from when I installed it on my desktop a year ago). Everything runs fine except I can't get the wifi to work, and it won't recognize the driver either, actually it doesn't recognize any drivers.
View 4 Replies View Relatedhow do I get ubuntu to recognize my external video card? i move my old hard drive from one computer to a new computer running ubuntu 11.04 how can i make it see the new video card?
View 7 Replies View RelatedThe freeze's on my machine only appears when i monitor the temperature of
the gpu. Normally i use gkrellm to monitor temperatures including the gpu temperature. When i stop gkrellm there a no more freeze's on my system. Then i started nvdock which also monitor the gpu temperature and the freeze's are back. Stopping nvdock make the system working normally. I have done a few reboots now, warm and also cold starts und everything works normal.
System data: AMD P2 X4 940, Nvidia GTS 250, openSUSE 11.3, Nvidiadriver 256.44,
Gigabyte Mainboard GA-MA78G-DS3H rev.2,8GB RAM, KDE 4.4.95,
i'm run'n knoppix 6.5 (i think) from a usb stick. under 'ifconfig' it finds 'eth0', but when i put in 'iwconfig eth0' it says: 'eth0 no wireless extensions'. i've tried other linux live cd's but to no avail...interestinly enough, when i run a linux (ubuntu) live cd on my virtual pc it hooks up(?..i figure bcuz its reading from da virtual ethernet?) further more, i researched it to the conclusion that the driver is not being detected. i tried ndiswrapper (under 'puppy') but tht didnt work either ( i've downloaded the lastes version of ndiswrapper and i plan on trying it again w/ the installation disk of the wireless card). however, even in my research i've seen there seem to be a difficulty in getting this particular driver to work? (netgear wg311v3 - wireless g pci adapter) how i can over come this problem? i'm kinda new @ linux, but i like the challenge. it doesnt matter wat linux system (the responder) i'll download it. but i'm really trying to get 1 online cuz i have to learn how to work the packaging systems.
View 4 Replies View RelatedI have a problem with recognising my mobile phone's memory card in Ubuntu 9.10. When I plug the phone in it starts the mass storage mode, but nothing happens in the PC. I suspect that I may have deleted phone's icon from the desktop, and I don't know how to bring it back. Also the memory card doesn't appear anywhere: nor in the Places tab, nor in Media folder.The phone is Samsung U900 Soul.
View 2 Replies View RelatedI had Karmic a while back, but i got rid of it becasue of my Bcm4312 Wireless Card would not recognize the STA driver, or bcm43xx.In that time i learned a bit of command line stuff. anyways now that I have my internet working, I was just wondering What I could do with ubuntu. I am interested in the command line and Programming. Where could I learn more about the 2 subjects?
View 6 Replies View RelatedI have a sandisk sd card with 3 partitions two ext2 and one fat 32 partition for some reson Ubuntu only automounts two ext2 partitions. I've tried inserting another card with only one fat32 partition and the system doesn't mount it. Both cards are visible in gparted byt not in "Places" menu.
View 4 Replies View RelatedI'm running Joli Cloud 1.2 on my HP dm1z netbook and for some reason, it doesn't seem to recognize my wireless card. Because the HP dm1z has no ethernet port, I had to use a USB adapter to connect to the internet.
View 2 Replies View RelatedHow do i get debian to recognize my wireless card? i have one built right into my laptop
after some messing around on the terminal i believe it is a code...
Do I need to install drivers or something to get it to recognize that my laptop is equipped with wireless? It's a Toshiba Satellite L505-S5990.
View 9 Replies View Relatedim new in all this, i already found a lot of drivers for my pc but this is annoying me xD fedora does not recognize sd memory/card
View 1 Replies View RelatedI can't get on the Internet at all not even through Ethernet. (It recognized my Ethernet hardware but doesn't connect.) I got the broadcom-wl drivers from Packman and installed those and it still was a no go. I tried to get the drivers straight from Broadcom and those didn't work. I couldn't compile the source code from the Brodcom site because i could not get build installed (got make installed but build just didn't install.)
Info:
Card
BCM4322
When I enter /sbin/lspci -nnk
Code:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory
[Code]....
according to this, the radeon kernel module is not recognizing my card. This is disabling DRM in Xorg.
Here are the Xorg errors:
Code:
(II) Loading extension XFree86-DRI
(II) Loading extension DRI2
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
[dri] Disabling DRI.
[Code]....
I just did a new install of slack 13.1 and i cant seem to be able to get my wireless card up. my system is a new ish dell laptop,a vostro 3700 to be honest im not even really sure where to start here. if i ifconfig i only get my ethernet and my loopback and if i "iwconfig" i just get told that i have no wireless extensions. yeah not sure what else to add.
View 4 Replies View Relatedi have installed centos 5.1 but it won't recognize 2nd nic card (eth1). i was unable to install the driver supplied by the cd. i am using intellinet gigabite pci network card. the network card recognize by centos 5.3 but i need to use centos 5.1. i also tried another intel gigabite adopter but it also won't recognize by centos 5.1.
View 2 Replies View RelatedI got a new EDUP Wireless Lan PCMCIA Adapter to replace a busted SMC wifi card. I am running Ubuntu 9.10 on a Dell laptop. The OS will not recognize the new card. Here is some output code...
View 1 Replies View Related
