General :: Get Device ID CF Card Or All Information About CF Card?
Mar 5, 2010How to get Device ID CF Card or all information about CF card?
Info: I use USB card reader to connected CF card
ADVERTISEMENT
General :: See Hardware Information Of Sound Card?
Aug 4, 2010How can I see hardware information for my sound card in Linux?
View 3 Replies View RelatedGeneral :: How To Call Ethernet Card - By Device Name Or Nick Name ?
Jun 23, 2010I want to know that in my Linux box under "Network Configuration....>Devices" i can see Device eth1 and Nickname eth0.
The ambiguity in my mind is when we want to down network interface we should call it by device name or nick name
Example
Or
Code:
General :: Atheros Network Card Not Available - Eth0 No Such Device Exists
Apr 19, 2010I have setup a dual boot machine which has OS of Windows Vista (32 Bit) / RHEL 5. The LAN Card details are - Atheros L2 Fast Ethernet 10/100 Base T - Controller. The said Network Card works fine with the ADSL Connection in Windows OS, but does not seem to initialise in Linux. When I run "ifconfig" in terminal window it gives away the prompt - "eth0 no such device exists".Although it shoes the loopback adapter (lo) device working fine. I forgot to mention over here, I have just started with Linux. So, I request "the" Linux Gurus to help me out with this one.
View 1 Replies View RelatedGeneral :: Mount -t Vfat /dev/sda1 /var/card - No Device Or Address
Jun 23, 2010Found a raw device for my card when reading through the /proc/partition list but got a "no device" message when mounting the card - mount -t vfat /dev/sda1 /var/card though there is sda in the list.How to know if sda1 exists?
View 1 Replies View RelatedUbuntu Networking :: Get Information About The Broadband Modem SIM Card?
Jan 24, 2011How do I get information about the SIM card of my USB broadband modem, for example it's phone number, serial number and so on, in Ubuntu 10.04?Not about the usb modem itself - just the SIM card inside it.Is there a way to probe it from the terminal, like you probe for usb devices with lsusb?
View 3 Replies View RelatedUbuntu :: Get The Card Number And Device Number On System For Attched USb Audio Device?
Oct 1, 2010how to get the card number and device number on system for attched USb audio device?
View 3 Replies View RelatedDebian Hardware :: Connecting To Device With Ethernet Card
Mar 18, 2011I just did a fresh install of Squeeze with a KDE desktop on my computer. I use this computer to run an instrument in my lab. The instrument is connected to my computer through an ethernet card. Since my reinstall I cannot figure out how to get my computer and instrument communicating again. I'm guessing that I need to somehow tell my computer to connect to the device, but I don't know how. Here is my interface configuration:
[Code].....
I think my instrument is connected to eth2, which does not show any inet addr or Bcast ip, so I'm guessing that is a problem. How do I fix this?
Fedora :: Recover Data From EXT2 Device (Card Or Image)
Dec 25, 2009I was testing a bug in F12+Acer Aspire One and its 'suspend' feature (you can probably find the thread) and I ended with my SDHC card messed up. I formatted it as ext2 (or ext3, don't remember exactly) and apparently its superblock got corrupted. For one thing there is a single file I want to recover from the card (I don't mind formatting it afterwards). I am no expert using e2fsck or fsck, that's why I am asking here. In addition I used the "dd" command to create a backup of the drive in a file (so I can start tinkering with it). What is the best course of action to recover my files? Either from the card or from the image?
View 3 Replies View RelatedUbuntu Networking :: WG511 Wireless Card Not Available As Network Device
Feb 22, 2011I have just installed Ubuntu 10.10 on a Dell Laptop. It has a Netgear WG511 (made in China) PCI wireless card but I cannot see any connections other than the wired one. Entering in lspci in the terminal mode and removing/replacing the WG511 shows (I think) that something is being detected in the PCI slot "Network Controller: Intersil Corporation ISL 3890 [Prism GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] rev 01". Is this the WG511 and, if so, how do I get it to be detected as a network device?
View 9 Replies View RelatedCentOS 5 Networking :: NIC Card Not In Device Lists - Connect To The Internet?
Jul 24, 2009i finished installing CentOS 5 and managed to connect to the Internet. My Network Interface Card (NIC) is "Atheros L2 Fast Ethernet" and it is not in the device list. anybody can tells me what i should do now to be connected to the Internet?
View 8 Replies View RelatedUbuntu :: Setup A Lan Connection Using Wireless Pci Card On Entire System D-link DWA-510 Card?
Mar 31, 2011How can I setup a lan connection using wireless pci card on entire system D-link DWA-510 card I have .
View 5 Replies View RelatedDebian Hardware :: Graphics Card Is Overriding Built In Sound Card
Sep 5, 2011I just bought a new graphics card and installed it. it works perfectly although my sound worked perfectly this morning and I think the graphics card is overriding my built in sound card. I need help fixing the sound. The graphics card I bought is an ATI Radeon Cedar HD 5450 The sound I want to use is HDA VIA VT82xx
when I run alsamixer I get Card:
HD-Audio Generic
Chip: ATI R6xx HDMI
[Code]....
OpenSUSE Install :: Acpi Better / Card Went To Legacy What Version Still Has Ati Drivers For Card
Dec 6, 2009i have a little experience with ubuntu but i have had bugs that are not resolvable at this time in ubuntu. so instead of giving wild bill back my pc i am looking for a new distro. my concerns with ubuntu revolve around acpi. no fan control and high temp. the 2nd problem that is almost overlookable is the ata1 softreset error. it usually is no problem but occasionally have to do manual fsck to fix. so heres my laptop specs. toshiba a305d-s6848. amd turion x2 ati x1250 integrated. 3gb ram. 500gb hd vista and ubuntu 9.04 dual boot grub with 100gb ubuntu and the rest vista. so q1= what suse version would be best?
q2= is suse's acpi better? ubuntu runs all features but fan control
q3= is suse as easy to install? or harder
q4= ati graphics i know for my card went to legacy what version still has the ati drivers for my card
q5= is suse easier or harder to work with and get everything working.
i know no linux is or opsys is perfect. im just looking for one that is stable and works the pc correctly. i know its a big thing to ask. i know no one can tell me that. but just looking for suggestions. im thinking of downloading suse and does all the downloads support live sessions.
Ubuntu Multimedia :: Video Card Died New Card Boots To Black?
Jul 15, 2010My video card developed problems, so I followed the suggestion in this thread:
Quote: Boot into recovery mode, then choose root, for a command prompt and enter
Code: dpkg-reconfigure -phigh xserver-xorg
but my ubuntu 10.04 32-bit system still won't boot. Shortly after the ubuntu logo comes up, before the login, my screen goes black and there is no more video signal. What else can I do to reset the video configuration? The card only has this info on it: I could put the card back in the system, reboot, and then pre-configure the system to drop to the intel 865G on-board video, but the msi card has intermittent problems and will spontaneously re-boot several times during the first ten minutes of turning on the system.
Ubuntu Networking :: Can't Get My Wireless Card & Wired Card To Work At The Same Time
Aug 21, 2010I'm running Ubuntu 10.04 Server. I can't get my Wireless Card & Wired Card to work at the same time. My interfaces file is incorrect, when I comment out 1 of the interfaces the other works. I have attached my interfaces file.
View 2 Replies View RelatedUbuntu :: Star Tech Pci420usb Card - The Card/devices Just Stopped?
Jan 23, 2011I recently installed a startech PCI usb expansion card...All went well and all external devices connected show up without a hitch. However a day ago The card/devices just STOPPED. I rebooted and no avail. Rebooted a second time got a IRQ 19 failure error. Then on a third try It showed up and worked fine... This has happened twice. Here's my IRQ print after running cat /proc/interrupts
CPU0 CPU1
0: 132 3 IO-APIC-edge timer
1: 0 146 IO-APIC-edge i8042
7: 1 0 IO-APIC-edge
I am assuming that the second to the last entry is the pci usb card. Is there a way to home in more deriectly to find and troubleshot the problem and see if its module or IRQ?
Networking :: Lucent WavLAN Card, Xubuntu / Dongle For The Wired Card?
Jun 15, 2010I recently installed Xubuntu on my old P3 laptop (Compaq Armada E500 if anyone is familiar). The laptop is a bit old, so both wired and wireless networking is done via PCMCIA cards. I have 2 cards installed, one for each purpose. I can't find the dongle for the wired card right now, so I am trying to use the wireless card. I am able to find the network I want to connect to, and type in the password since the network is secured. It tries to connect but then pops up again asking for the password (I know it is correct). Is this card supported by linux/compatible? I tried finding drivers online but the sites that had drivers were down.
View 1 Replies View RelatedHardware :: Card Reader/writer That Will Support Most Current Card Types?
Jan 20, 2010Looking for a card reader/writer that will support most current card types. I am running Fedora 12 x86_64 on a home-grown desktop. Are there any gotchas, that I need to watch for?Also, Internal vs. external, any benefits of one over the other, or is it just personal preference?
View 5 Replies View RelatedCentOS 5 :: Will 5.3 Support My X3100 Graphics Card And Bcm 4311 Wlan Card
Mar 30, 2009very much like everybody i am also waiting for centos 5.3, because 5.2 could not sit on my notebook due to obvious driver issues. would anybody tell if centos 5.3 support my x3100 graphics card and bcm 4311 wlan card?
View 5 Replies View RelatedFedora Installation :: Installing On A SDHC Card - Installer Appears To Want To Install To Both SD Card And Also USB Stick
Jul 21, 2010I have an EeePC 4g netbook which only has a 4Gb hard drive and I thought I would like to install Fedora 13 on an 8 Gb SDHC card and use it to boot the netbook.
As neither the netbook nor I have an optical drive, I made a bootable USB memory stick using Unetbootin which boots the netbook and could be used like a live CD to install Fedora.
On booting with the live USB stick, with the blank SD card in place, and clicking on the install icon, the installation starts but then there are 2 problems; the first is that the installer appears to want to install to both the SD card and also the USB stick. There is a tick in the box beside the USB stick which I can't remove.
I decided to ignore that and put a tick in the box beside the SD card but when it got to the point where it creates partitions it said "Could not find enough free space for automatic partitioning. Please use another partitioning method"
Surely 8 GB is more than enough space for partitioning, so where am I going wrong and why does it want to install on the USB stick as well?
Fedora Networking :: 14 Can't Connect To SpeedTouch 585 - Either Wireless Broadcom Card Or The Wired Ethernet Card
Dec 4, 2010Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
Fedora :: Getting Smart Card Reader Added As Security Device In Firefox?
Jun 10, 2009Anyone running fedora 11 have any luck getting a smart card reader added as a security device under firefox?
Specifically from firefox: Edit-Preferences-Advanced-Encryption tab-Security_Devices-Load;
Enter arbitrary name and "/usr/lib64/libcoolkeypk11.so" as the module.
This worked fine in fedora10 and was the necessary step to getting a card reader to work with firefox. In fedora11 (with firefox beta) the browser just comes back with nothing, it doesn't even respond. Note I am familiar with the concept of pki and certificates as well as certutil, pkcs11_inspect, pklogin_finder, etc. Also note utlities like pkcs11_inspect and pklogin_finder and esc all work and communicate with the reader and read the contents of the card but smart card login configured via the authentication applet (as working in fedora 10) is not working either.
Fedora :: USB Sound Card Appears Twice In KDE Multimedia Device Preference List?
Oct 20, 2009My USB sound card used to work perfectly, but after i unplugged it, there seems to be a problem. When it is unplugged it is in the multimedia device preference list, but it is greyed out. When i plug the sound card in, nothing happens to the greyed entry, instead a new device shows up with the same name.
When press test on the new entry, it works fine, but it's like pulseaudio dosn't recognize the USB sound card, and the sound just comes out of the internal speakers. Also, if i move the new entry up in the list, it has none effect at all. Sound still comes out of the internal speaker. Does anyone know how i can fix this?
Hardware :: SD Card - Debian Sid - Mmcblk Device Dies Under A Heavy Load
Feb 24, 2010Is there a way to switch a internal card slot from /dev/mmcblk0** to /dev/sd** ? I'm backing up (via rsync) an ebook directory (1.9gb) to sd card and get massive i/o errors, card turning read-only,etc. This is via a built-in slot on a toshiba laptop. When I use a card reader, the card attaches to /dev/sdd1 and all is fine.
This is a new Sid install. The laptop's card slot worked fine under Ubuntu 9.04 and still works if the amounts of data are small. All I can figure is that the mmcblk device dies under a heavy load...
Networking :: Unable To Configure The Network Card Because The Kernel Device Is Not Present
Jan 28, 2010I have installed Linux SuSE 10.3 on a PC (Lenovo Thinkstation A58). However, when I start the computer I get the following error message:
"No valid Host_ID or host-name found."
I then use YaST to set up the network. I get the following error message:
"Unable to configure the network card because the kernel device is not present."
The computer has Windows 7 installed and everything seems to work fine. The LED on the Ethernetplug is blinking when using Windows, but not when using Linux. I guess this means that there is no driver for the Ethernet card (Marvell Yukon 88E8057). I have not found any driver for the card and am considering buying a new one. Which PCI card works with SuSE Linux 10.3?
Ubuntu / Apple :: Does Recognize The Intel Card And Can Use It Over The NVidia Card
Sep 16, 2010I have been waiting on installing ubuntu on my mid 2010 MBP 15' for a while now. I was wondering if the dynamic GPU switching was supported yet. Does Ubuntu recognize the intel card and can I use it over the nVidia card?
View 1 Replies View RelatedCentOS 5 Hardware :: Lspci Shows Lan Card But Lan Card Not Working
Jun 15, 2010If i run lspci it shows lan card model, but lan card is not working. How do i check my lan card driver is installed or not?
Is there any way to list all installed drivers with hardware information like we have device manager in windows.
OpenSUSE Hardware :: Switch From Video Device Built Into Mother Board To Card?
Mar 29, 2010I am trying to switch from the video device built into the mother board, to a card i just put into my machine. I'm using gnome and don't know where to start. I shouldn't need new drivers (based on a possible misunderstanding) because I am going from a nvidia 6100 to a 8600. I have looked in various places like the control center but haven't had any luck. I just started using linux and have very little experience in the terminal. Issues with the current card are stopping me in my learning process.
View 9 Replies View RelatedFedora Hardware :: Conflict Between Sound Card And Tv Card?
Dec 30, 2009My soundcard (a Creative X-Fi Xtreme Music) is running with the unix-driver offered by Creative. But after a restart (without switching power off) I have to switch the sound device in xmms from ALSA to OSS. Also my tv card (an hybrid card from Hauppauge, WIN-TV HVR-1300) is only getting a signal after a restart, before there is no signal found. To get sound while watching tv I'm using one of the following lines, it seems to be random wich of them is working without error:
> sox -r 48000 -c 2 -t ossdsp /dev/dsp1 -t ossdsp /dev/dsp
> sox -r 48000 -c 2 -t ossdsp /dev/dsp -t ossdsp /dev/dsp1
So it looks like a problem in loading the modules in correct order, but I'm not sure. Perhaps there is also a problem with my nvidia graphic card (see list below for the kind of card), that I have installed with the unix-drivers from nvidia's webpage. To solve this problem I'm now searching since september, when I got my new computer, including:
-graphics: Lead896 D3 X GTX260 Extreme+
-CPU: Intel Core2Duo E8500, 3166 MHz, FSB 775
-mainboard: Asus P5Q-E, P45 F G SA
[code].....