Hardware :: Adding HP Color LaserJet CM2320nf MFP To CUPS?
Jul 14, 2010
I'm trying to add an HP Color LaserJet CM2320nf MFP to a CUPS print server.
Cups Version: Common UNIX Printing System 1.3.7
I read somewhere that using foo2hp would work, so I simply selected
Code:
Printer Driver: HP Color LaserJet 1600 Foomatic/foo2hp (recommended)
but when I print to the device all I get is jibberish or blank pages.
What driver should I user or where can I get a ppd file? I've been looking for one for about an hour to no avail.
Notes:
Setup as AppSocket/HP JetDirect
Device URI socket://192.168.101.13:9100
View 3 Replies
ADVERTISEMENT
Jun 22, 2010
My printer is a HP laserjet 4 Plus. It used to work with the gutenprint drivers pretty much since always.I don't know when it broke, because I don't use it that often. I have tried with the generic postscript driver, with the gutenprint driver, with the j4dith driver and with the hplib driver. Basically, what happens is that all jobs never finish processing in the queue. On the other hand cups-pdf still works.
View 14 Replies
View Related
Feb 21, 2011
At work I've got a HP LaserJet P1505n printer that is used as network printer. It has an ethernet port and is plugged in directly into the network. Everybody in the office is using Windows and has no problems working with it. After a few hours of google-ing, I also managed to set it up with CUPS as a LPD printer, with some problems: every time I send a document to it, it goes into the "error" state, and I have to press the "green" button for the printer to start printing. Is there a way to work around these errors? I tried to google for these kind of errors, but couldn't find anything useful.
View 3 Replies
View Related
May 1, 2010
Can CUPS print to a color printer? And also do I need a GUI running on my computer in order for CUPS to work?
View 1 Replies
View Related
Jan 29, 2010
I've been switching out computers to the Ubuntu distro and so far it's been very successful until this recent snag! As I am trying to have a printer plugged in through USB on one computer and shared on the other! I have the USB on the second computer and it found the printer just fine, no problems and nothing else I had to install! I then went to the first computer and tried to add the printer through the CUPS website using all the proper addresses and queue names and I receive CUPS "client-error-not-possible". I have read other threads on this very same problem but to be honest they just make no sense whatsoever to me! I was thinking of just giving up and using a print server but I know that I will run into the same snag as even then I still need CUPS.
View 9 Replies
View Related
Mar 24, 2010
I have a Canon i560 printer, which is rather well supported by Gutenprint drivers. I have been using those for a while and they serve my regular printing needs. However, when I try to print a good quality photo on glossy photo paper, strange stuff happens.The colour doesn't come out nice, but somewhat faded. Worse, no matter how I specify that I want to make a print on 10x15 glossy paper, the actual print is always cut off, printed landscape when I specify portrait, etc. The printer is shared via CUPS and when my wife prints from her Windows XP machine, the printer works normally and the colours look brilliant so there's no problem with the machine itself, it has to be in the driver.
I googled this problem extensively and in my search, I found out that Canon does in fact have a Linux driver for this printer, though it can't be found through their website. It is on their ftp server, however: ftp://download.canon.jp/pub/driver/bj/linux/I installed the driver from there, following instructions that I found on the web and I have the printer working. But...the photo paper size that I want to print on (10x15 centimetres) isn't available in the ppd file. I can also not specify a custom paper size to print on in digikam or gwenview, since that option is greyed out...Since a ppd file is a text file, I decided to see if I could add a custom paper size. I googled some more and found this page: Adding Custom Paper Sizes to a Custom Printer File Using a Text EditorWith the help of that page, I thought I had it nailed. I added the following to my ppd file:
*PageSize photo/Photo 10x15: "<</CNPageSizeName(photo)/PageSize[283 424]ImagingBBox null>>setpagedevice"
*PageRegion photo/Photo 10x15: "<</CNPageSizeName(photo)/PageSize[283 424]ImagingBBox
[code]...
View 5 Replies
View Related
Jun 14, 2011
Kernel 2.6.21.5, Slackware 12.0
KDE 3.5.7
(Mozilla) Firefox 2.0.0.4
Do color settings in the desktop environment affect color in the web browser? Thanks.
View 2 Replies
View Related
Jan 12, 2011
Can GNOME Color be used to alter this change directory color in Ambiance theme? I'd rather have white.
View 4 Replies
View Related
Jul 6, 2009
I am using the screen app, and have set bce to on, and issued the following commands to set my background and foreground color: tput setab 4; clear; tput setaf 7; clear;
This temporarily sets everything properly on my screen. However, when I issue any commands that change or set their own background color (for example, when I issue an "ls" command with colorized output), the background color gets lost for any new output and I have to reissue the commands listed above in order to retrieve my background color.Ideally I'd like to keep my background color when issuing these commands, as it serves as a good way to remind me of what environment I am currently issuing commands in.
View 1 Replies
View Related
Feb 24, 2010
I have a printer configured on my Ubuntu server using CUPS amd made it available to the local network. The printer is recognized on my other Ubuntu machine without any problems.
But on my Suse laptop, the printer is not recognized. Using the YaST printer Configuations, I choose the option "Recieve Printer Information from Remote CUPS servers. But no printer is found.But... when I choose Do All Yout Printing Directly via One Remote CUPS server and enter the correct IP address (192.168.1.100), the printer is found andI am sure the printer info is broadcasted because it shows up on my second Ubuntu PC. But why is it not recognized by default on my Suse machine
View 2 Replies
View Related
Feb 26, 2010
I know this is listed somewhere but I cannot seem to find it -
How to I add a root users to access the 127.0.0.1:631 interface for CUPS?
View 1 Replies
View Related
Feb 27, 2011
Running: Ubuntu 10.10
I'm in a bind and I don't know how to get what I want. Nmap shows ipp running cups on port 631. Great, simple enough I uninstall cups, along with its dependencies. A new portscan reveals that the port is closed SUCCESS, but... Ubuntu Update Manager nags me @ every restart about the "important security" updates. I can't lock the version of cups in Synaptic, because cups is not installed! So you see I'm in a bind. If I have cups installed I have an open port, and if I uninstall cups the update manager nags me. What do I do? I've tried:
- stopping the cups service and issuing the chkconfig cups off command... (doesn't close the port)
- uninstalling cups... (update manager nags)
- fuser -k 631/tcp (great, but @ reboot the port is still open)
Please teach me how to close this port / stop this service / tell update manager to shove cups.....
View 8 Replies
View Related
Feb 24, 2011
cups does not start with the server. When I try to start from the terminal I get the error message
cupsd: Unable to read configuration file '/etc/cups/cupsd.conf' - exiting!
cupsd: Child exited with status 1!
The log files show nothing. cupsd.conf exists. It is user - root and group - root with permissions set at 0644.
My interpretation of this is that the program is not launching from either boot or terminal for a fundamental reason. I do not quite see what that reason is .
View 2 Replies
View Related
Mar 22, 2011
I've been trying to figure this out for longer than I care to admit. We upgraded our print server (sysadmin) to 64 bit lucid and that moved our cups server from 1.3.7 to 1.4.3. We have a remote server that is still 1.3.7 (printhost1) but version difference doesn't seem to be relevant to the problem.
If I'm on console on sysadmin and do an lpr to a printer on printhost1, everything is copacetic. However, If I'm on a host that specifies "ServerName sysadmin" in its "/etc/cups/client.conf" access_log on sysadmin shows:
172.16.10.52 - - [22/Mar/2011:11:11:40 -0500] "POST /printers/103_hp4250 HTTP/1.1" 200 306 Create-Job client-error-not-authorized
and error_log shows:
E [22/Mar/2011:11:11:40 -0500] Returning IPP client-error-not-authorized for Create-Job (ipp://localhost:631/printers/103_hp4250) from 172.16.10.52
We've been using this method of sharing printers between locations for years and years so it not working now is a surprise.
cupsd.conf on sysadmin looks like this and is as open as I can imagine:
ServerName sysadmin
ServerAlias *
ServerAdmin webmaster
FileDevice Yes
SystemGroup staff
LogLevel info
code....
Additional symptoms are that only printers locally defined on sysadmin show up when the client uses System>Administration>Printing in gnome. Same thing when you browse printers in windows on our samba domain controller that backends on CUPS.
I just know that it's something simple that's going to make me facepalm but I'm at a loss.
View 6 Replies
View Related
Feb 25, 2011
What is your favorite 256-color color scheme for vim?
View 6 Replies
View Related
Feb 12, 2010
I have installed Slackware 13 on one of the hard disks of my computer in order that I can get it working properly before changing over from 12.2.
My main problem is that I cannot get CUPS to change from 'Letter', which I presume is an American size, to A4, has anyone else had experience of this problem?
View 9 Replies
View Related
Jan 21, 2010
installed lenny and am trying to install brother dcp7010 again:
1) i can't start CUPS server with /etc/init.d/cups restart "file not found", there is a cups@ link in /etc/init.d.
2) when i install dcp7010 cupswrapper
dpkg -i cupswrapperDCP7010-2.0.1-2.i386.de
it ends with
" lpinfo: Verbindung zum Server nicht m�glich: Verbindungsaufbau abgelehnt
lpadmin: Verbindung zum Server nicht m�glich: Verbindungsaufbau abgelehnt"
(connection to server not possible, refused)
3)[URL] doesn't work.
4)foomatic-gui can't find the installed dcp7010 lpr-driver
brdcp7010lpr-2.0.1-1.i386.deb, (a couple of days ago it did)
This is frustrating because it worked in etch and worked for awhile in lenny. The dcp7010-scanner does work.
View 13 Replies
View Related
Feb 2, 2010
I have an HP color laser printer and I am looking for a way to print black as black instead of using tri-color. For example If I print a document that has colored text then any black text is printed using the color cartridges rather then using black. I have been surviving by using windows XP in virtualbox but I'm hoping someone can help me with this. I've looked all over then net for a solution but I've found nothing. I remember having similar problems like this with older Macs because of postscript printing and I'm thinking this is the same problem but I don't know how to fix it. I've searched the forums as well but no joy.
View 3 Replies
View Related
Jul 26, 2010
Under Fedora 12, the HP laserjet p2035 is supported. It appears under HP>Laserjet as a dirver option when setting up the printer. But all the HP driver options except two havedisiappeared under Fedora 13 (64 bit version).
I may be missing some package, but if so I don't know what. I didn't have to do anything special, I think, for Fedora 12.
Also, I can't set up the printer as a windows printer. I don't know if it is because none of the driver options work or because of something else. I often have problems setting up remote printing with a new release, so I expected this. But I'm not sure where to begin troubleshooting.
View 10 Replies
View Related
Aug 5, 2011
Who know how confiure a HP LaserJet P1102w on bebian 6?
View 3 Replies
View Related
Aug 31, 2010
how can i setup the HP Laserjet P1005 on slackware 13.1 ?
View 5 Replies
View Related
Jul 7, 2010
Is anyone else having problems with HP LaserJets and Ubuntu 10.04? I have a HP LaserJet 3015 and am running a dual boot with Windows 7.
Printer is automatically detected and works fine on: Windows 7, Windows XP, LinuxMint, and older versions of Ubuntu.
But when I'm running Ubuntu 10.04, when I try to print it just adds the job to the print queue and it never prints. After awhile I get a message saying that Ubuntu is unable to communicate with my printer. (or something to that effect). I can't even print a test page.
I have tried installing HPLIP following the directions given, but get the same behavior (can't communicate with the printer). I have tried unplugging the power cord and usb cable and plugging them back in (as per the directions I am following). But still not communicating.
View 7 Replies
View Related
Feb 2, 2010
I have tried to download the latest version of CUPS but do not know how to install it properly using command line commands above 'sudo' and 'sh', and I have tried to install HPLIP but it needs 'cups-devel' installed apparently. My Debian can see the 1020 clearly enough to identify it and give its status as idle, via the CUPS interface. When I try and print a Test page it goes to the spooler, says it is printing OK, but nothing prints. The job then disappears and appears on CUPS as completed. In the old days we would have sent a eof() to make the printer work. Have I got a bug in my HP Laserjet 1020 driver? Or am I missing the great plug-in that is not on the Synaptic Package Manager The SPM says I have HPLIP installed.
View 5 Replies
View Related
Nov 13, 2009
I've searched these forums high and low, but I can't seem to find a way to fix it. I had a similar problem in F10, but that was fixed. The problem I'm having now is a little bit different. If I open the print que before I print something like a test page, and then start printing, an item with appear in the que for a second then disappears, and the printer will do nothing. I've run out of ideas on how to get it to work, I did try to apply the original fix for my first problem since it seemed that the drivers for the Printer that were available via HP weren't quite right, but that didn't work. I tried to run -c 'yum install foo2zjs' and that didn't do anything either.
View 2 Replies
View Related
Sep 6, 2010
I have a hp officejet on my fedora 13 pc. I tried to configure it as a network printer. I disabled selinux and then i opend the door in the firewall.. the printer is seen in the network but when I try to print from a client it says "printer description not available" . I disabled then firewall both on server and on client. then rebooted both. but no luck. the printer is available on the network but it prints only from the server.
View 2 Replies
View Related
Apr 23, 2011
I am running F15 Beta i686 (Gnome3) Desktop on a dual-core, 4 Mb DDR2 system. I already installed hplip and hpijs drivers and connected HP LaserJet 5MP printer to the parallel port of my PC. Set up was by running "system-config-printer", adding device URI=parallel:/dev/lp0, and selecting approriate driver (CUPS+Gutenprint (en) for the printer. However, when I chose to print a test page, nothing came out and the printer window says the printer is not connected. This is even though I can print from Fedora14 installed on the same PC.
View 2 Replies
View Related
Jun 3, 2011
I am having problem printing some urgent documents. My fc14 machine cannot seem to see the printer. I remember on an earlier version it was a breeze ...I connected the printer and immediately the machine recognized it.I spent 2 hours trying to install hplip-gui.i686 0:3.11.5-1.fc14 successfully but yet the machine cannot see the printer.---------- Post added 3rd June 2011 at 08:16 AM ---------- Previous post was 2nd June 2011 at 11:59 PM ----------
View 8 Replies
View Related
Aug 17, 2010
I'm converting my coworker to Linux (who loves it) and I've gotten everything working but this %$#@ printer! I've tried the various solutions posted on these forums (over the past 4 or 5 years). But none of them seem to work.Has anyone solved this problem with Lucid (10.04)? Are there some new steps that pertain to 10.04?
View 2 Replies
View Related
Oct 21, 2010
I have been given a HP laserjet 1320 printer. how to make it work?
View 9 Replies
View Related
Dec 9, 2010
I've just received my hp laserjet pro m1212nf printer / fax /scanner device. It's installed as a Ethernet printer. First I had troubles with the printer. I could solve it by running
Code:
$ sudo hp-plugin
and then reinstalling the printer from the HP Device manager utility.
During the installation the tool also told me:
Code:
Unable to locate the HPLIP Fax PPD file:
HP-Fax3-hpcups.ppd.gz
Fax setup has been disabled.
[Code]...
View 9 Replies
View Related
