I have installed Slackware 13 on one of the hard disks of my computer in order that I can get it working properly before changing over from 12.2.
My main problem is that I cannot get CUPS to change from 'Letter', which I presume is an American size, to A4, has anyone else had experience of this problem?
I have a printer configured on my Ubuntu server using CUPS amd made it available to the local network. The printer is recognized on my other Ubuntu machine without any problems.
But on my Suse laptop, the printer is not recognized. Using the YaST printer Configuations, I choose the option "Recieve Printer Information from Remote CUPS servers. But no printer is found.But... when I choose Do All Yout Printing Directly via One Remote CUPS server and enter the correct IP address (192.168.1.100), the printer is found andI am sure the printer info is broadcasted because it shows up on my second Ubuntu PC. But why is it not recognized by default on my Suse machine
I know this is listed somewhere but I cannot seem to find it -
How to I add a root users to access the 127.0.0.1:631 interface for CUPS?
Running: Ubuntu 10.10
I'm in a bind and I don't know how to get what I want. Nmap shows ipp running cups on port 631. Great, simple enough I uninstall cups, along with its dependencies. A new portscan reveals that the port is closed SUCCESS, but... Ubuntu Update Manager nags me @ every restart about the "important security" updates. I can't lock the version of cups in Synaptic, because cups is not installed! So you see I'm in a bind. If I have cups installed I have an open port, and if I uninstall cups the update manager nags me. What do I do? I've tried:
- stopping the cups service and issuing the chkconfig cups off command... (doesn't close the port)
- uninstalling cups... (update manager nags)
- fuser -k 631/tcp (great, but @ reboot the port is still open)
Please teach me how to close this port / stop this service / tell update manager to shove cups.....
cups does not start with the server. When I try to start from the terminal I get the error message
cupsd: Unable to read configuration file '/etc/cups/cupsd.conf' - exiting!
cupsd: Child exited with status 1!
The log files show nothing. cupsd.conf exists. It is user - root and group - root with permissions set at 0644.
My interpretation of this is that the program is not launching from either boot or terminal for a fundamental reason. I do not quite see what that reason is .
I've been trying to figure this out for longer than I care to admit. We upgraded our print server (sysadmin) to 64 bit lucid and that moved our cups server from 1.3.7 to 1.4.3. We have a remote server that is still 1.3.7 (printhost1) but version difference doesn't seem to be relevant to the problem.
If I'm on console on sysadmin and do an lpr to a printer on printhost1, everything is copacetic. However, If I'm on a host that specifies "ServerName sysadmin" in its "/etc/cups/client.conf" access_log on sysadmin shows:
172.16.10.52 - - [22/Mar/2011:11:11:40 -0500] "POST /printers/103_hp4250 HTTP/1.1" 200 306 Create-Job client-error-not-authorized
and error_log shows:
E [22/Mar/2011:11:11:40 -0500] Returning IPP client-error-not-authorized for Create-Job (ipp://localhost:631/printers/103_hp4250) from 172.16.10.52
We've been using this method of sharing printers between locations for years and years so it not working now is a surprise.
cupsd.conf on sysadmin looks like this and is as open as I can imagine:
ServerName sysadmin
ServerAlias *
ServerAdmin webmaster
FileDevice Yes
SystemGroup staff
LogLevel info
code....
Additional symptoms are that only printers locally defined on sysadmin show up when the client uses System>Administration>Printing in gnome. Same thing when you browse printers in windows on our samba domain controller that backends on CUPS.
I just know that it's something simple that's going to make me facepalm but I'm at a loss.
installed lenny and am trying to install brother dcp7010 again:
1) i can't start CUPS server with /etc/init.d/cups restart "file not found", there is a cups@ link in /etc/init.d.
2) when i install dcp7010 cupswrapper
dpkg -i cupswrapperDCP7010-2.0.1-2.i386.de
it ends with
" lpinfo: Verbindung zum Server nicht m�glich: Verbindungsaufbau abgelehnt
lpadmin: Verbindung zum Server nicht m�glich: Verbindungsaufbau abgelehnt"
(connection to server not possible, refused)
3)[URL] doesn't work.
4)foomatic-gui can't find the installed dcp7010 lpr-driver
brdcp7010lpr-2.0.1-1.i386.deb, (a couple of days ago it did)
This is frustrating because it worked in etch and worked for awhile in lenny. The dcp7010-scanner does work.
when i use the cups web interface to add a printer (administration -> add printer) cups starts looking for printers on the network. how do i make sure it does not do this (this annoys the switches at work and my port gets disabled)?
View 2 Replies View RelatedI connect my laptop to several different networks and need to print in each of them when I am connected there. In the past (ie 12.2 and earlier) I solved this by running a cups server on the laptop and having it poll the appropriate cups servers in each network.
I was thinking that perhaps in 13.0 I could bypass having the cups server on the laptop and that KDE would "see" the various cups servers available. However this does not seem to work...
I've been running Slackware 13.37 since RC1 (so I'm a relatively new Slacker!). I set up CUPS to start as a default service during my install process. I print once in a while, but my computer is not a print-server per se. Do I have to have it auto-started in order to just be able to print on-demand (like, from LibreOffice or Okular)?
View 3 Replies View RelatedAfter upgrading to Slackware64 13.1 BETA1 my USB printer stopped working. Blacklisting usblp fixed it. See this thread regarding problems with CUPS 1.4.x. It might be a good idea to blacklist it by default in 13.1, just like Nouveau, as this appears to be a problem that has come to stay...
View 5 Replies View RelatedWith the printer I am using, the text always extends part of the way into the margins, resulting in it getting cut off. Is there any way to change the margins for a printer?
View 7 Replies View RelatedI'm trying to setup a cups printing server, but I want the default admin to not be root. Google has given me a couple hints and the cups administration page a little further but I'm now stuck at the end.What I want is a user called admin who belongs to the group printadmin as cups server administrator.What I have done1) I have created a local user called admin user yast user interface , and a group called printadmin. Added admin to the group printadmin2) I changed the line in /etc/cups/cupsd.conf.SystemGroup sys roottoSystemGroup printadmin 3) Changed all instances of of Authtype from Basic to Digest (Allows me to have a file called passwd.md5 in /etc/cups/ with the name of the allowed cups admins inside)4) Ran the following command to create and add admin.Code:lppasswd -a -g printadmin dmin This is what I receive after running the commandlppasswd -a -g printadmin administratorEnter password:Enter password again:lppasswd: Die Kennwortdatei wird verwendet!
View 3 Replies View RelatedWhen I run:
# Ping 127.0.0.1
Returns nothing. As if expecting an answer that never comes. Then press Ctr + C and returns:
--- 127.0.0.1 ping statistics ---
117 Transmitted packets, 0 received, 100% packet loss, time 116009ms
I use 3g modem connection configured with the command:
# pppsetup
The internet connection is normal. But without the ping localhost also can not open the settings for CUPS.
Here is my /etc/resolv.conf (if it helps in something):
google.com search
nameserver 8.8.8.8
nameserver 8.8.4.
code....
I have an HP Photosmart USB printer that I configured with HPLIP (which seemingly "exports" into CUPS). All is well until the printer is turned off and then back on again sometime later: somebody, somewhere automagically adds the printer to CUPS so that I have two, count 'em, printers defined.
Code:
Some UDEV rule, some other thing?
I'm trying to get HP DeskJet 1050 working on Slackware 13.1. When I plug it in to USB I can see it in lsusb. I've installed CUPS started it and went to add printer - but printer is not found. Ok, so I wanted to choose the series I have but 1050 is not listed in HP (is this driver missing?). So I went on to google on it and I got to HP website telling me to install HPLIP. Ok downloaded extracted and ./configure should run but it is not there (automatic script run has no Slackware listed).
View 6 Replies View RelatedI have a 2010 model laptop running slackware 13.1, and after setting up a udev rule for my epson rx700 printer/scanner, this laptop can print to the rx700 without problems, and I can scan straight into gimp with xsane... I can even share the printer and scanner over my local lan.however when I pack up my laptop and hit the road, the other folks in the house cannot print or scan over the network anymore, so I tried to get an older desktop we have laying about to be the cups / sane server instead of my laptop.I tried a Dell Dimension 8300, and a Dell Optiplex GX 260. Both have USB 2.0 however, on fresh slackware 13.37 installs, even after the udev rule, neither old computer is successful finding the scanner with sane-find-scanner, although it is listed in output of lsusb.
does anyone know if there is a workaround on these older machines, or have there been some hardware changes in the last 8 years that the machines haven't undergone, and I should give up trying to get one to be cups/sane server for rx700..
My Canon S9000 wide format printer just died. I'm looking for a new one. Is there a wide format printer that works well with CUPs in Slackware?
View 8 Replies View Relatedafter looking at this thread [URL]... i found out that my printer is no longer working with the latest CUPS package (in -Current). I tried to delete the printer and re-adding it again with the same driver, but it failed with an error message: Bad device-uri "cnij_usb:/dev/usb/lp0"! I have tried to use the driver provided by Canon or by the automatic detection by CUPS, but it ended with the same results
View 1 Replies View RelatedI upgraded from 13.0 to 13.1 and now I have strange behaviors with the printer. It is an Epson Stylus Photo RX640. It was working well with the vanilla Gutenprint 5.2.2 that came in Slack 13.0. The printer is shared and used from other slackware boxes and a mac. Upgrade to 13.1 (gutenprint gets to be 5.2.4) ...
Now when I print from the machine that has the printer attached I get full black pages, and cups shows errors. The Mac is still able to print well (probably because it is using its own PPD and passing through directly to the printer). I then removed gutenprint, and then removed the 5.2.2 PPDs (that were still in the system). Reinstalled gutenprint from the Slackware 13.1 distro. And the problem persists.
[Code]....
Not sure when CUPS started acting up. I have the latest 13.1 current software installed.The first page to print is always OK, but all succeeding pages are overwritten. The second page shows the first page on top of it, and the third shows the preceding pages on top of it - and so on. Has anyone else seen this problem?I guess the printer buffer is not getting flushed correctly. If my configurations were trashed in some way, I don't know where to look for a fix.
View 14 Replies View RelatedSo it looks like the CUPS package provided by Fedora is not compiled with SSL support. I'm getting an error while trying to print via IPP over URL...Is there a way to enable SSL without rebuilding the package? If no, how do I rebuild the package?
View 5 Replies View RelatedI'm trying to setup a headless CUPS server, but no matter what I do, I can't add a new printer. Not using the web interface, or the GUI of another computer connected to the CUPS server.I always get to the point shown in the attached screenshot, and then I am asked for a password, which never works. I've practically slaughtered my cupsd.conf, and it now looks like this:
Code:
LogLevel info
# Allow remote access
Port 631
Listen /var/run/cups/cups.sock
[code]....
it looks like the above should tell CUPS to never ever ask for authentication, but as you can see in the second screenshot, it still does!
Cups is disabled by default on backtract 5 (kubuntu 10.04), I can start the service running this command
Code:
/etc/init.d/cups start
but I would like cups to load at start up always, I'm sure the fix is just some file editing but don't know which.
I have a wire network connection to a printer over my Lan. It is an HP 3210 All-in-One series. Can someone tell me whether cups is capable of printing to this printer? Or do I need to use HP's drivers (:::shudder::?
View 8 Replies View RelatedI noticed that on my server, I keep getting the same error flooding my logs:
Code:
We don't use CUPS but I'm sure that package is a dependency of something else. It seems like this is Samba trying to share out to the local CUPS server. How can I disable this from flooding my logs? Samba should not be sharing out any printers at all.
Is it possible to setup a printer without cups, most of Linuxes try to setup cups, which is basically for Notworks, but it really doesn't help much with a stand alone and more of nuisance and a hindrance.
View 4 Replies View Relatedwhose still learning the ropes, I've installed a new printer on my Debian (2.26 version, unstable, tho' duly updated ) - a HP Photosmart C4600 ,through CUPS and all [b]seemed[/b] well ... applied /etc/init.d/cups restart.Result: it appears to oblige for a moment then straight back to 'STOP' mode so that I can't even get a test page printed.I'm at a loss to know what the issue might be, except if the message coming up on the CUPS admin page - "Filter "foomatic-rip-hplip" for printer "Printer" not available is of any pertinence: I've tried getting/installing/enabling such but -no joy.s
View 7 Replies View RelatedNot sure if this is hardware or software so I am raising the question here. I have an Ithaca 280 printer that worked great on fedora 8 with cups 1.3.3. When I upgraded my server and installed Fedora 12 with cups 1.4.2 i noticed a 5 second delay between sending a print job to the printer and it actually printing. This issue doesnt happen with laser printers, just the ithaca thermal printer. I have tested this with 10 other ithaca 280 printers and all of them have the same result. I am using a raw driver, and it is an IP based printer setup for Jetdirect in cups. The setup is identical on a Fedora 8 server as it is on this Fedora 12 server. I have even taken the steps to upgrade to cups 1.4.4 just to see if it was corrected in a newer version, but the issue is still there. I have a utility that writes the raw text directly to the printer which i used to test that it wasnt an issue with the printer or its internal print server. That utility allows the document to print immediately.
what is causing this delay and how to correct it? If not, does anyone know how to print directly to the printer using cups instead of letting it go to the queue first like cups normally does for print jobs?
I have, on numerous times, tried to set up a wireless printer using CUPS. with each attempt it repeats a query asking for the username and password (root password). After entering both the window disappears, pauses and again repeats the same request. It appears that it will not accept the root password even though it works in other cases such as becoming a root user.
View 2 Replies View Related