Ubuntu :: Installed Sabayon And It's Boot Loader?
Jan 7, 2010I installed Sabayon Linux and it's bootloader, but I did not like it. How do I remove it and its bootloader so only Ubuntus remains?
View 1 Replies
ADVERTISEMENT
Ubuntu :: No Boot Loader Is Installed In The MBR Of /dev/sdb
Mar 26, 2011My problems with Ubuntu seem to always be caused by a problem with Windows.
My laptop has two hdd's with Windows XP on the first and Linux Mint 10 on the second.
I had to reinstall XP on the first and now mint won't load at all.
I ran the boot info script and her it is:
Code:
Ubuntu Installation :: Grub2 - No Known Boot Loader Installed In MBR
Mar 12, 2010I am trying to dual-boot windows xp and ubuntu 8.04LTS from two separate hard drives, on a compaq d510 evo SFF. With research, the best way to do that seemed to be to upgrade to Grub 2 and all would be well...not so much. I installed each OS with the other hard drive removed, fyi. I believe that this tells me that I SHOULD be able to boot off either drive, if I could get Grub 2 to recognize...
Code:
steve@Stewie:~$ sudo fdisk -l
Disk /dev/sda: 40.0 GB, 40060403712 bytes
255 heads, 63 sectors/track, 4870 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xb788b788 .....
Code:
steve@Stewie:~$ sudo update-grub
Updating /boot/grub/grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.24-27-generic
Found initrd image: /boot/initrd.img-2.6.24-27-generic
Found linux image: /boot/vmlinuz-2.6.24-26-generic
Found initrd image: /boot/initrd.img-2.6.24-26-generic
Found memtest86+ image: /boot/memtest86+.bin
done
I have also tried adding the proper code to the 40 custom file, and while I could at least get it to acknowledge my changes, I couldn't seem to find the magic code to get it right....
The other thing I tried was adding GRUB_DISABLE_OS_PROBER=false
to /etc/default/grub
and last but not least, here is my results.txt from the boot info script. I also tried uninstalling/reinstalling grub 2, perhaps I created issues there?
Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> No known boot loader is installed in the MBR of /dev/sda
=> Windows is installed in the MBR of /dev/sdb
Red Hat / Fedora :: Installed Over Windows Boot Loader ?
Jun 18, 2010I have two hard drives, one (hard drive C) is 250GB and is the first hard disk. The second (hard drive Z) is 1000 GB and is the second hard disk in order. There used to be windows XP on C and Windows 7 on Z.
Because I installed 7 to Z from XP which is on C, it put the Windows Boot Loader on hard disk C. I didn't know this until now.
When I installed Fedora, I gave it all of C to install on. That messed up something because the Windows Boot Loader was on that drive, so grub didn't list it in the OS's to load. I had to add it manually, and got it working correctly so it had an entry for the partition that Windows 7 was on. This didn't work however, because Windows 7 on drive Z didn't have it's NTLDR on that drive, so now I have a 7 installation without an NTLDR on Z and a Fedora install on C. I am sure grub is working properly because when I change the load order of the hard drives to load Z first, it gives the same error:
NTLDR is missing
Press Ctrl + Alt + Delete to restart
or something along those lines.
Is there a way to get Z to have an NTLDR again and be able too boot Windows 7? I really hope I didn't mess up my entire 7 installation because of this.
Slackware :: Lilo Cannot Installed On Windows 7 Boot Loader - MBR
May 8, 2010I have a WD 80GB ATAPI hard disk for my operatings systems.
The partition table is :
First i installed Windows and then Slackware.
The problem is that in MBR , looks that lilo never installed and when my pc starts, the lilo menu never load it . Boots directly to windows.
What i should do, in order to have the lilo menu in startup?
OpenSUSE Install :: 11.3 - Red Error: "the Boot Loader Installed On A Partition That Does Not Lie Entirely Blew 128 GB .The System Maight Not Boot"
Mar 29, 2011i want to install opensuse on my new lap top i partition my hard (600gb) with 5 parts:
c: 97 gb
d: 150 gb
e: 150 gb
f: 100 gb
g: 50 gb
and 38 gb unlocated part
in opensuse instalation , the yast makes a 2gb for swap 14gb = root , 21 gb = home, but in Instalation Overview under Booting has a red error: the Boot loader Installed On a Partition that does not Lie Entirely Blew 128 GB .The system maight Not Boot;
General :: Windows 7 - Make A Boot Loader Load The Existing Boot Loader From The First Partition?
Jun 14, 2010I installed ubuntu using wubi and then I tried installing grub 2 but it failed. I need a way to reinstall the mbr sp it will load the windows 7 loader from the first partition.
View 1 Replies View RelatedGeneral :: Will Sabayon Dual Boot With Suse 11.3?
May 29, 2011Thinking of putting sab alongside suze 11.3, I wonder if the bootloaders are compatible (versions of grub) or if only native systems (apart from windows/apple) are acceptable.
View 1 Replies View RelatedUbuntu Installation :: Dual Boot Using Windows Boot Loader, Not GRUB?
Nov 8, 2010I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
Ubuntu :: Dual Boot - Changing Boot Loader Between Disks?
Jun 17, 2010Here's my current setup:
Disk 0 (500GB): Windows Vista
Disk 1 (1TB): Windows 7
Disk 2 (160GB): Ubuntu
My boot disk is Disk 0. Currently when I turn on the PC, GRUB loads from Disk 0. I can then choose either Ubuntu or Windows Loader. If I choose Windows Loader (also located on Disk 0), I can choose to load Windows Vista or Windows 7. I like this setup, but I would like to move the loaders (exactly as they are) to Disk 1 so that I can format Disk 0.
Ubuntu :: Dual Boot - Remove The Windows Boot Loader
Apr 26, 2011One thing I notice and hope someone here can steer me in the right direction. When I start up my computer I have the list of options to choose from, if I choose to boot into Win 7 I am the presented again with another boot menu from windows. I would like to remove the Windows boot loader.
View 4 Replies View RelatedUbuntu Installation :: How To Boot 10.04 Via Windows XP Boot Loader
Jul 28, 2010I have 2 HDDs:
HDD 1 (sda) with Windows XP installed on sda1 and four more partions.
HDD 2 (sdb) with three NTFS-Partitions (sdb1, 5 and 6) and Ubuntu 10.04 (sdb7) + Swap-Partition (sdb8).
I would like to boot Ubuntu using the Windows XP boot loader, i.e., having an entry there to choose Ubuntu and start my installation of Ubuntu 10.04. I have installed Ubuntu 10.04 on sdb7 and told the installer to install the grub2 boot loader to /dev/sdb (should it have been /dev/sdb7?). When using the boot selection option of my bios and choosing the second HDD Ubuntu starts without problems.
I used dd if=/dev/sdb of=bootsect.lnx bs=512 count=1 to copy the mbr of my second HDD and copied the file bootsect.lnx to my c: drive. Then added C:ootsect.lnk = "Ubuntu Linux" to my Windows boot.ini. When rebooting my computer I get the option "Ubuntu Linux" in the XP boot loader. Choosing it I come to a black screen with a blinking white cursor. All I want to do is not use Grub 2 as my primary boot loader but instead leave my WinXP installation untouched and start Ubuntu from within WinXP boot loader. This has been working just fine with my old Ubuntu installation.
General :: Grub Boot Loader With Puppy - Cannot Boot From My Hard Drive
Nov 1, 2010I'm trying out puppy linux, as I have an old system, and the new Ubuntus do not work on it.
Anyway,I cannot boot from my hard drive but only from the floppy.I'm just not too keen on always booting from the floppy.
Here is the Menu.ls file:
Debian :: Grub Boot Loader On A Dual Boot System?
Dec 16, 2010This is the third time I try unsuccessfully to install Debian as a second OS on a hard drive. When it gets to the end of the installation process the installer asks whether I want to go ahead with the Grub Boot Loader, I choose yes. The end result is however that I can't boot that partition within the hard drive -- i.e., Debian. Can someone tell me what is going on? Should I not use the Grub Boot Loader when I have more than one operating system on a machine? Should I not install Grub on the Master Boot Record (MBR)?
View 3 Replies View RelatedFedora Installation :: Repair To The Grub Boot Loader To Boot Into Win 7 ?
Oct 23, 2009I have XP, Win7 Pro and F 11 installed. Before I installed F 11, Win 7 boot mgr was working fine. I then installed F 11 and I went to System/Admin/bootloader to edit it and it wouldn't bring up the boot loader. In the attachment was the error msg. Now my only option when I boot up is F 11.
I do not have access to the Win 7 DVD only the F 11 install disk since I am on a fishing trip and need to use Win 7. How can I repair to the grub boot loader to boot into Win 7?
Fedora Installation :: Multi Boot System - Set Up The Boot Loader ?
Mar 18, 2010I'm trying to install Fedora onto a computer that has Windows XP on the first of two SATA drives. Windows 7 is on the second drive.
I installed Fedora no problems on a 14 gig free space I created on the first drive and told it where and what my other OS's were. Fine so far. I didn't tell it to overwrite the MBR on the XP (first) drive. I took the second option which I "think" put the boot loader on the fedora partition.
All good - till I rebooted and I just saw my Windows 7 loader with my options for XP and Windows 7 but no Fedora.
So, if I overwrite the MBR on the first drive, will that mean I can't access my Windows 7 installation?
How SHOULD I set up the boot loader?
Ubuntu :: Can't Boot To Grub Boot Loader
Feb 26, 2011I can't boot to the grub boot loader now. It only boots into the grub command prompt. What should i do?I understand grub is the bootloader but I don't know what else to call the command prompt
View 9 Replies View RelatedHardware :: Random Freezes In Ubuntu / Sabayon And Others
Jul 27, 2010I had Linux Mint installed and it became subject to random freezes. The system was never under any serious strain at the times that this occurred. I went to the Ubuntu forums and discovered that this is a relatively common problem with Ubuntu and that there's no fix available. I tried almost all advice offered there, without any remedy. These included disabling Flash, Java, Compiz, Nvidia drivers etc etc.
I decided to try another distro. Since then I've had random freezes in Suse, Sabayon and even with a Fedora live disc. Oddly enough, I never have this issue with Win 7 (I dual boot). If this is a hardware problem, why does it never occur under Win 7? If it is, as I suspect a hardware issue, how can I identify the source of the problem and resolve it?
Software :: Install Jdk On Sabayon?
May 20, 2011How do i install jdk on sabayon?
View 2 Replies View RelatedFedora :: Boot Loader Won't Boot WinXp
Mar 2, 2011i have a dual boot system running Fedora14 as the main OS and WinXp as a secondary OS. On the boot up screen i choose to boot windows XP and all i get is a black screen. i am assuming the boot-loader has a small glitch and won't boot WinXp. i am stressing because i need to use MS office Access to finish a crappy school project due tomorrow.
View 7 Replies View RelatedUbuntu :: Sabayon User Manager Launchers Not Trusted?
Jan 30, 2010I'm working on setting up a computer lab for my kids' school, and am planning to use Ubuntu LTSP and Sabayon User Manager to lock things down.
When I edit a profile in Sabayon, and create the default desktop icons I'd like them to have (Firefox for example), when the user logs in the icon is generic and when clicked says:
"The application launcher Firefox.desktop is not marked as trusted. If this application launchers source is unknown to you then it may be unsafe to launch."
If I click "Mark as Trusted", the Firefox icon pops up and all is well. However whenever a new user logs in, they have to go through this process and I'm worried it may confuse them.
Why are application launchers created by Sabayon not trusted by my LTSP users?
Ubuntu 9.10 by the way.
Software :: Web Page Creator For Sabayon 5.3
Sep 25, 2010Does anyone know of a good web page creator that is easy to install on Sabayon 5.3?? I'm new to Linux and web page creating, so be gentle! I have registered a web address and a host, now all I have to do is get the info to the world.
View 3 Replies View RelatedProgramming :: Setup Github On Sabayon ?
May 18, 2011How do setup github on sabayon. And i try to connect to git git@github.com i get ths error. PTY allocation request failed on channel 0
View 2 Replies View RelatedUbuntu :: Use Grub Instead Of Win 7 Boot Loader ?
Aug 26, 2010Every dual boot guide and every dual boot I've set up I've done the same way. Always install Windows first then install Ubuntu. Well, this time Windows didn't let go of the bootloader it seems like. I have kind of an awkward setup for hard drives...32gb SSD /2X250gb raid1 /home 3gb(at beginning of 1tb HDD) swap
The rest of the TB is Windows 7 Home Premium. I installed Windows 7 without problems the installed Ubuntu 10.04 x64 without problems. It asked if I wanted grub to overwrite mbr I said yes. Computer rebooted... Straight into Windows. I downloaded EasyBCD and added grub to Windows boot menu. The option works great, goes straight into grub. Grub even has Windows listed.
Why is my computer using Windows boot manager and how do I switch it to grub?
Ubuntu :: Boot Loader Is FUBAR
Dec 6, 2010I've got a dual boot Ubuntu/XP system (two separate HDs) that I've really hosed up and Here's the sad tale:
1. When rebooting recently, the bios prompted me to confirm a change to my system configuration... the query you get when you add a new HD, for example. I didn't add anything to the system, but stupidly hit F1 to apply the changes in my haste.
2. I could then boot into Ubuntu, but not Windows. When I tried the latter, I got the "NTLDR is missing" message.
3. Based on reading some online help tips, I booted into the recovery console and tried fixboot.
4. Now, I can't boot into either system! I get something like this when I choose Ubuntu from the Grub menu:
[Code]....
Ubuntu :: Can't See Boot Loader Menu
Jul 7, 2011Just installed ubuntu 11.04 for the first time and it works fine except when i start the computer up the screen goes to the no signal adjust to 1600 x 900 screen. if i wait 30 seconds or so it boots into ubuntu or i can hit the down arrow 4 times and hit enter to load windows so grub must be running but isn't sending out a video signal or at a resolution the monitor can't display so does anyone know how to solve this?
View 2 Replies View RelatedUbuntu :: Boot Loader Not Loading Xp?
Aug 27, 2009after installing Xp i recover boot loader. but it not boot Xp. it seen Xp but not going to it. only load Ubunto (9.04) here is my grub loder file
# menu.lst - See: grub(, info grub, update-grub(
# grub-install(, grub-floppy(,
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
[code]....
Ubuntu :: What Is Default Boot Loader
Jan 31, 2010I installed hardy heron in my system recently.I wonder what is the default boot loader that is shipped with installation.Because I could not find LILO installed and saw GRUB in my update manager?Then there must be some other boot loader that was used to dual boot in my system?What is the default boot loader that is shipped with ubuntu?
View 1 Replies View RelatedUbuntu Installation :: Remove The Boot Loader?
Jan 7, 2010I have my ubuntu removed but not the boot loader. How can I remove it ?
View 3 Replies View RelatedUbuntu :: Can't Boot Windows 7 From The Grub Loader?
Jan 14, 2010i've a little problem with the grub loader. I've two OS in my laptot: Ubuntu 9.10 Karmic Koala 64bit and Windows 7 64bit. But i can't boot Windows 7 from the grub loader. The grub still load the /dev/sda1 partition that is the recovery partition of the laptot, while windows 7 is in the partition /dev/sda6. I tried to modify the path in the grub.cfg, but still load the wrong partition, how i can do?
View 2 Replies View Related