I have Suse Ent 10 SP3 that when I reboot the server sometimes it won't... it behaves like this
up and running If I rebooted boots ok so up and running again and If I rebooted again it won't from Hadr Drives
What I can check on my boot/grub?
why sometimes boots OK and sometimes does not
but the way I was thinking it was the HBA attached but I removed them
OK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is
mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx
please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks
I initially had Red Hat 5 on my pc on my primary 40 hard drive, then i added a second hard drive as a secondary master and went on to install suse on it, now when suse boots it doesn't even give me the option to boot red hat, i did not touch any of the partitions on the red hat hard drive during the suse installation. Is there hope ???
View 3 Replies View RelatedI Would like to dual boot my computer for it to have suse linux and windows xp professional I have an 80 GB hard drive partitioned in NTFS is it possible to dual boot and what software do you suggest to partition the hard drive.
View 1 Replies View RelatedI am trying to install SuSe 9.3 from a Live CD onto an old laptop, and the base installation completes but the boot does not finish. It stops at the following:
Waiting for device /dev/hdc5 to appear: ......resume device /dev/hdc5 not found (ignoring)
Loading kernel/fs/reiserfs/reiserfs.ko
Waiting for device /dev/hdc1 to appear: ...... not found -- exiting to /bin/sh
sh: can't access tty; job control turned off
$
Hardware is: Sony Vaio PCG FX205K, 128Mb RAM, 850MhZ, 20G Hard drive.
Thinking of putting sab alongside suze 11.3, I wonder if the bootloaders are compatible (versions of grub) or if only native systems (apart from windows/apple) are acceptable.
View 1 Replies View RelatedI recently installed 11.3 on an external drive. After adding some software in yast (searched Kernel and checked every option), I was prompted to reboot but the no boot sector found error came up. Tried reinstalling with the same result. Grub is boot loader
View 8 Replies View RelatedMy Suse server is failing to boot and it is giving the following error:
Mellanox ConnectX Boot over IB v1.9.972
gPXE 0.9.6+ -- Open Source Boot Firmware -- [URL]
No more network devices
I have two network interfaces
Infiniband network and the Ethernet network.
It is a x6275 Sun server.
I'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
[Code]...
Is it possible to install rpms from SuSE 8.2 pro to run on SUSE 11.2 x86_64. I mean games and simple applications not system files.
View 1 Replies View RelatedTrying to upgrade my installed SUSE 9 version to version 11 but am having trouble.Do I need to delete the earlier version first and do a clean install
View 3 Replies View RelatedSo I've recently scrapped togehter a computer to use for running openSUSE, and I've downloaded the Live CD, as well as the full DVD. Whenever I turn on the machine with either, I get the DISK BOOT FAILURE error. I've made sure that it boots first from CDROM drive, and verified all of hte wiring, but I can't see to get this to boot up. I've heard its possible it's just an issue that the motherboard doesn't want to run it, but are there other things to do to test it out?
View 7 Replies View RelatedI installed open SUSE to dual boot with XP and have an interesting problem. When my computer rebooted to complete the SUSE install, it would not work at all. I rebooted and the GRUB came up with operating system choices, but when I chose one, absolutely nothing would happen. I tried to reinstall SUSE and nothing happened. I rebooted with the XP cd and nothing happened. I then rebooted with a bood cd I have and it showed the hard drive but could not test it and said it was absent.
After freaking out, I shut the computer all the way off and started it up again. Now it works. It seems that I cannot reboot the system for it to work. I have to turn it all the way off before it will work at all.
Windows runs as well but was a bit shaky to start. I think it's ok now.
Anyone know why a reboot will not restart the system and I have to shut it all the way down? Soft boot, hard boot, doesn't make any difference.
I have a SLES-10-SP2 installation with both a /boot and / directories. Is the MBR stored in the /boot or /.
View 3 Replies View RelatedThere is no prompt for choosing whether I boot windows or Linux it just takes me to Linux. I need to install and load some things from windows and can't figure it out.
View 1 Replies View RelatedI had mounted the pen drive then dismounted. I found out that by putting the pendrive into my sat receiver recorder with Ext3 mad the machine go crazy and I have had to sort that out before this! To say my wife was mad as hell is an understatement, but this was what I was told to do on AVForum.But now this leaves me in a predicament. I have no OpenSues booting. It goes through all the loading and then it asks me for the password with all the script showing and not the desktop. It says repair boot after this. Is there a simple way to resolve it? I think it was looking for the pendrive. Well I had to reformat that back to FAT.
View 5 Replies View RelatedI am trying to install Suse 11 on my new laptop. The laptop has 250GB capacity. As I only use Linux for some scientific programming, I only needed to allocate about 20GB to Linux.
SDA1 is NTFS PQ Service 13.1 GB
SDA2 is NTFS Sys Reserved 101.9 GB
SDA 3 was the mainWindows user partition.
I shrunk this partition to 195GB using GPARTED.
I then tried to add 3 new Linux partitions to the unallocated disc space for usr home and a swap partition. GPARTED informed me that I would need to produce an extended partition to do this.
SDA4 became an extended partition 24.42GB
SDA5 EXT2 10.74 GB
SDA6 SWAP 1.46GB
SDA7 EXT2 11.21GB
When I started the SUSE install, all of the partitions were recognised correctly, but on the Grub details screen (Grub was allocated by SUSE to SDA4) I was warned that as this was beyond 128GB, my computer might not boot correctly. Is this likely to be the case, or do I need to alter something to get SUSE to install. The last thing i want with a new computer is a system that won't boot at all.
I'm running Suse 9 service pack 2. I have the recovery cd in the system and have issued the following command /sbin/mkinitrd -m "reiserfs aacraid mptscsih jbd ext3" -b /tmp/kevin/boot -d /dev/sda2
They system responded with : Root Device: /dev/sda2 (mounted on / as reiserfs) Module List: reiserfs aacraid mptscsih jbd ext3 You may have to update your boot loader configuration QUESTION: How do I update the boot loader from the where I am now?
Note: the reason that I need the bott information is because during maintenance the module reiserfs was left out the kernel file when the a previous mkiniterd command was issued cuasing /dev/sda2 not to mount and the system to go into a kernel panic.
I want to create RAID disk on machine_2. Next, I want to replace one of the RAID disk from machine_2 to with the RAID disk from macnine_1. Then I want to build the RAID disk from machine_1 with machine_2 data. This is my question:
How to determine the physical drive the system boots on in a RAID array?
Or
How to determine the RAID disk from machine_1 in machine_2?
After upgrade of 11.1 to 11.2 I noticed that most of the services that was started in 11.1 at boot are starting now in 11.2. I check run-level of services with
Code:
chkconfig --list
And everything is as like was before the upgrade. When I start services manually everything is OK, but on restart they do not starting.
Code:
cat /var/log/YaST2/y2logmkinitrd
Kernel image: /boot/vmlinuz-2.6.31.5-0.1-default
Initrd image: /boot/initrd-2.6.31.5-0.1-default
Root device: /dev/sda7 (mounted on / as ext3) .....
Running Suse 10.3, desktop box, Asus M2NPV-VM, Athlon 64 3800+, two HDD RAID 1 config. I was getting 'bad block' errors when logging into Root, ran a search for fsck to try and fix the problem. Found out not a good idea to run while the system is mounted, tried to boot from install DVD, could not boot to a command prompt, tried to open the Repair tool, got a 'repair failed' message. Rebooted again to the HDD, but now it hangs, tried to go to Failsafe mode, same thing.
Was able to boot to Recovery mode, but not sure where to go from here. I also noted when booting to the HDD in 'verbose' mode it was showing a lot of 'irrecoverable error's on the boot logs concerning the HDD.
pm-hibernate and pm-suspend only work the first time after booting into runlevel 5. This behavior is reproducable. pm-hibernate starts out correctly but then hangs the system bevore it gets to save the image from memory to disk. The computer locks up and does not power down.
pm-suspend: on wake up there is no signal on the screen (pm-suspend called from X environment or text terminal shows same result). I spent some time reading information on s2ram s2disk and added the follwing options:
S2RAM_OPTS="-f" in
/etc/pm/config.d/00meine.config
(display adapter is GForce4 nvidia with the closed source nvidia driver for accel)
splash = n in
/etc/suspend.conf - to get some more information during the suspend / hibernate.
Any ideas to get pm-hibernate / pm-suspend to work more than one time after boot??? Hibernate would be a great start for daily work and for energy saving.
horstausdemwald PS: In runlevel 3 pm-hibernate works various times from a text terminal. Under the same condition pm-suspend leads to a scrambled text terminal after resuming (some help on this: using vga=normal in Grub). The computer continues to work - though without visual aid - when the text terminal is scarambled. For example Runlevel 5 can be called blindly from the text terminal.
Now after my experiments with Open Indiana on another partition, I have rewrite my Suse Grub, that was as in / suse partition as in MBR. Suse partition is intact as well as files in /boot/grub, but in MBR is boot loader of Open Indiana as primary. How can I get back Suse boot loader. On Installation media under Rescue system I didn't find any option for re-installation of boot loader.
P. S. Now I can run Suse completely in Gui without any problem, because, I made some changes, in Open Indiana boot loader, but I would like return a Suse Grub.
Title is pretty self-explanatory. Suse 11.1 will not boot (or shutdown) past a certain point unless I constantly move the mouse around or press keys.
View 9 Replies View Relatedeeebuntu 4 beta uses grub2. If opensuse 11.x is installed as a multiboot, opensuse grub does not recognise eb4. In opensuse, contents of fdisk - l:
[code]...
How do I add eebuntu boot in opensuse?
I'm running SuSE 11.2, dual booted with Windows 7. SuSE installed fine, but when I rebooted, it went straight to windows and didn't give me the option of booting into SuSE. I reinstalled SuSE and went into the boot settings in Yast. When I rebooted, neither Windows nor SuSe would boot. I ran a system repair from the SuSE disk, at the boot loader settings, it displays the SuSE Linux partition and the Failsafe Linux recovery partition. I did not format any drives in the system repair. How do I add the Windows partition to the boot loader settings?
View 1 Replies View Relatedhow to remove the linux opensuse which are dual boot with window ?
View 1 Replies View Relatedhow to properly install Suse Linux 11 64 bit on my laptop (with AMD Turion x2 x64). Currently I have Windows XP Professional x64 as operating system and I will prepare a new partition for the Linux installation. Should I take care of something before/during the installation, or it will install itself and will setup automaticaly the dual-boot configuration? I am also thinking of installing BackTrack Linux for dual boot with xp x64, would there be some differencies by the installation?
View 4 Replies View RelatedThere was an option in openSUSE about booting an installed system if grub is deleted from the MBR. This option is no longer available and there is no option for automatic recovery. For these reasons, I want to boot an installed system from command line. I know how to mount the root partition where openSUSE 11.3 is installed, but how to proceed?
View 3 Replies View RelatedI've been running a Suse 11.2 and ubuntu 9.04 on an internal HDD in separate partitions for about 6 months on an Acer aspire with 756 meg ram. I installed Suse first then Ubuntu as I couldn't work out how to alter the partitions and keep Ubuntu when installing Suse first. Yesterday when I tried to boot Suse I got the message Error 15 no file found. I went into boot edit for and Suse this is what I found.
Root (HD0.0)
Kernel /boot/vmlinuz-2.6.31.5-0.1-default root=/dev/disk/by-id/ata-s
nitrd /boot/initro.2.6.31.5-0.1-default
Id like to be able to fix this so I don't lose either OS as I use them both for different things and until I learn all about Suse and can make a live cd of OS, I really love it but am not prepared to dump ubuntu. I've put a lot of time into both and don't want to start again. I've got a Suse studio account and really want to create my own dedicated Video/audio KDE Suse. I'm new to dealing with grub and the terminal other than cut and paste, so may be a bit dim until I can understand them.