I have 2 hard drives "C" and "D", one for windows 7 pro (C) and the other with SUSE 11.2 (D). I have GRUB as the multi booter on the "C" drive. Everything is great and I am very impressed with Linux (first time). I now want to try Ubuntu but cannot find how to unistall GRUB and then SUSE, (or do I just reformat D and install Ubuntu?)
View 1 RepliesI have ubuntu server installed on an older 1700+ AMD machine with 512 DDR Ram and 40 GB HD. I don't know the first command to type in the Linux command line and from what I have read their is a GUI interface you can install but it's not recommended for security purposes. My question is can you install the GUI to setup the server and then uninstall it when your done and is there any downside to this approach?
View 2 Replies View RelatedI intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has
ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8
[code]...
Earlier today I installed SUSE 11.2 with KDE and everything worked fine at first. Then I started monkeying around. First I tried getting my XFI extremegamer to work right and that didn't go well. So I started from the install disk and repaired the install. That messed up GRUB so I couldn't choose to boot Windows 7. Tried fixing that with super GRUB disk (USB) and now GRUB gets error 22. I found that the most common cause is deleting the linux partition in windows.
I also need to install stuff, like drivers and other programs. The problem with my sound card is that I can't even hear anything out of it outside of the test sound. The included media player doesn't get anything, neither does online site like ...... On a side note, I'm thinking about just reinstalling linux and starting fresh. Considering that I'm such a linux n00b, would it be better to use KDE or GNOME?
I installed a suse 11.3 on my acer laptop and it worked just fine for two days.I was able to use internet as well though wi-fi driver i still had to figure out.This morning when i started it, it gave me an error like this:- Failed to load grub Error 18 now from what i understand is the solution is to downsize the harddisk partition used by the linux root to somewhat 10gb.Mine is about 40gb.
So i thought why not re-install the os again.But even after changing the bios setting to boot from cd-rom and putting in the suse dvd still its not booting from dvd and continously giving this error Error 18:Selected cylinder exceeds maximum supported by BIOS and then it comes to a command prompt like this grub>
I have a Dell Dimension 4400, 8 yrs old. It is set up to boot to either Open Suse 11 or Windows. I turned on the machine this morning, it booted very slowly. My screen says, "GRUB loading stage 1.5" then it says "Error 21." I can not go beyond this screen. My machine is stuck here.
View 4 Replies View RelatedI had install AVG 8.5 linux edition for ubuntu. And now I can't unistall it.
View 1 Replies View RelatedLooking for a little help uninstalling a program called bandwidthd. It recommends that i update before removal, but also doesn't work.
View 7 Replies View RelatedI'm having trouble booting a Dell PowerEdge 6650 Server running Suse 9 (RAID 5). Following the POST detection of firmware, processor, raid, etc., it displays:
------------
One logical drive found on host adapter
One logical drive handled by BIOS
GRUB _
------------
It will sit at the "GRUB _" prompt with a flashing cursor and will not boot to the OS.It's not a typical "grub>" prompt and I'm unable to type anything or ESC from it
how do we uninstall programs on opensuse linux by konsole?
View 1 Replies View RelatedI need to use xp, but I cant unistall ubuntu I dont why, I had tried a lot of thing and nothing, I put a iso in a cd but the cd doesnt boot, I put a iso to a usb , and it doesnt boot, I had tried to used super grub disk with unetbootin but nothing happen, I tried to gparted and delete but I cant
View 9 Replies View RelatedI am on squeeze with kernel 2.6.32-3-amd64 and I have installed nvidia driver :cat /proc/driver/nvidia/version NVRM version: NVIDIA UNIX x86_64 Kernel Module 190.53 Wed Dec 9 15:29:46 PST 2009 GCC version: gcc version 4.3.4 (Debian 4.3.4-8)
View 1 Replies View RelatedI tried to play a mpg file on a clean ubuntu 10.4 system which I guess laundhed totem movie player....it asked to me to download and install some packages which I accepted but unfortunately the quality of the movie isnt good (very black and red for all colors)...I want to un-install what I accepted previously and install the extended extra package found here:URl...
and hopefully that will set this as my default encoders and work better....however I dont know what I installed previously.does someone know what it was and how to un-install it?If there is another decoder anyone recommends for playing movies that would help as I am still at this point not sure the restricted-extras will fix my video.
maybe a dumb question but can you unistall the Email program that comes with Ubuntu, evolution and install KDE's Kmail?
View 1 Replies View Relatedill try to write in english as well as i can.So, my problem is this:Fedora has Nouveau drivers installed by default, and I want to install nVidia propietary drivers.When i try to install Nvidia propietary in runlevel 3, it says that ive to deactivate or unistall Nouveau.
Ok, i do that, but the next reboot, the tty doesnt work (black screen) and i cant access runlevel 3 correctly and i cant install propietary driver. I have looked this in google and i didnt find nothing, so i ask here.
I have a multiboot system chainloaded by SUSE grub. I have installed CENTOS on an extended partition thrice with various grub install options available in install media. I am unable to chainload CentOS with SUSE grub or PCLinuxOS grub.
Here is my menu.lst -
# Modified by YaST2. Last modification on Mon Sep 20 05:43:13 SGT 2010
# THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader
# Configure custom boot parameters for updated kernels in /etc/sysconfig/bootloader
default 0
[Code]....
How do I get CentOS to boot from openSUSE 11.2-11.3 grub.
I had Ubuntu 9.10 installed and working great. I wanted to check out SUSE because i heard it was better for laptops and wanted to test it out. Went through the install, which was a bit more complicated partition wise than I'd like, asking the begin and end segment shell or something. I changed them to give me a 5GB partition, deleted an old partition of gNewSense (wireless was just too difficult to implement ie. work) and tada... stuff broke. gNewSense still shows up in SUSE's "GRUB" but I can't boot to it. When I threw in my 9.10 cd to fix everything, it showed that 9.10 was still installed and gNewSense was not.
So, how can I fix this. Is there a way to just reinstall the 9.10 GRUB for the Ubuntu I already have installed? The sooner the better, Ubuntu was my primary OS and all my stuff is on it! FYI, do not recommend SUSE as far as installation goes
I multiboot with Suse Linux 9.2 with kernel 2.6.8 & Windows XP on my hard drive. I want to know how can I remove grub boot loader from the MBR of my hard drive safely to keep Windows XP running with no problems?
View 2 Replies View RelatedI have a poweredge t110 and am trying to install suse 11 on my server. I am getting a error 17 grub. It will not allow me to get any farther, I have three 250gb HD installed.
View 1 Replies View RelatedBefore installing OpenSUSE I shrunk my Win 7 partition down in half, then created 3 partitions out of the new free space for /root, /home and /swap. I installed opensuse and when it got to the bootloader section I kept getting Grub error 17 - cannot mount selected partition, and so on. I made sure it was writing to the MBR and also into /boot if that makes a difference, but I did get a prompt that said YaST couldn't make changes to /dev/sda (I'm paraphrasing and can't remember the exact error message). At the moment I have suse installed and my windows partition intact, but no bootloader (not even windows one) so all I can do is boot to Live CD.
Below is the output of fdisk -l. There's quite a few more partitions than it's showing, sda3, sda4 and sda5 are my /home, /root, /swap and the other ones are windows partitions, like the system recovery along with the win7 install. During the suse install I formatted the home and root partitions with ext4 filesystem.
[Code]...
Is it possible to install rpms from SuSE 8.2 pro to run on SUSE 11.2 x86_64. I mean games and simple applications not system files.
View 1 Replies View RelatedI've installed FreeBSD (sdc1) and DesktopBSD (sdc4). When I try to boot DesktopBSD it boots FreeBSD.here is menu.lst
###Don't change this comment - YaST2 identifier: Original name: other###
title FreeBSD 8.1
rootnoverify (hd2,0)
chainloader +1
###Don't change this comment - YaST2 identifier: Original name: other###
title DesktopBSD-1.7-amd64
[Code]...
I guess the chainloader boots 1st ufs slice and ignores the other. I've installed GrUB in FreeBSD and when I try to boot with different menu 'configfile /boot/grub/menu.lst' it returns error 17. This is probably due to inability reading ufs.
So I installed openSUSE 11.1, and got everything from yast2 and then finally got nvidia.ymp or whatever. Bascially, the one click install. When i did that, I couldn't boot into the SUSE GUI. I could boot into the command line but I couldn't start X server.When I did try the Ec2-openSUSE-2.62.27.9 option, I get grub error 13. It says that the ex2fs file system is not supported, only I did not format it with ext2. I am completely stumped and I'm a newbie.
View 3 Replies View Relatedadding Fedora Core 11 to opensuse's GRUB menu so that I can boot FC11 from it. Here's what fdisk -l shows:
Device Boot Start End Blocks Id System
/dev/sda1 1 13 102400 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
[code]......
I have a system running om vmware esxi with suse 9.3 i did an inplace upgrade to 10.2. i got the follwoing error during upgrade error occurred while installing grub (version 0.97) error 21 disk cannot be found. I ignore this error and the upgrade went fine. after a reboot the server works pretty fine. Except one thing GRUB.. i cannot install it on this system. i want to install grub on this system.
View 1 Replies View Relatedmy Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies View RelatedI dual booted opensuse along with vista. I installed opensuse in extended partition, with grub and gave the option as "boot from extended partition". Now everything is fine. I am able to boot into suse as well as vista. Now how can I restore my vista bootloader? I want to uninstall openSuse. When I try restore mbr from hard disk. There is absolutely no change!
View 1 Replies View RelatedWith the generous help from caf4926 and please_try_again, i was able to boot into Ubuntu 9.10 with suse's grub legacy.Now I have another problem that i'd need help on, I added a new IDE hard drive for storage and it became sda and the original sda with 3 OSes changed to sdb. Grub can't boot into any OSes except windows 7. Well, i can still boot into Ubuntu if i change the boot option from
Code:
root=/dev/sda2 ro quiet splash
to
[code]...
I've setup a dualboot-system. SUSE 11.2 starts automatically and works well all the time.
But when I want to use XP (yeah, sometimes I do that...), in about 40% of all cases it won't be loaded when chosen in GRUB. Just a black screen without anything else.Then I need to restart and in the 2nd trial it works!
I am unable to get a knoppix poor mans install to boot using grub and opensuse 11.3. I have tried the same method on another box, same opensuse 11.3 and it boots fine. However, no matter what partition I put the knoppix files in on the problem box, it is the same error. I also have several opensuse kernels listed in the grub menu that were added when the kernel was updated, so the knoppix grub entry is off the screen. I have to down arrow to list the knoppix entry. I read that with this kind of error using ubunto as the host system, that running update-grub will force grub to look for bootable kernels and add it to the menu of boot choices. Does the same fix apply to opensuse 11.3? I have two versions of puppy linux working on this box as a poor mans install, so I am at a loss why it will not see the knoppix kernel. Can it be a problem of too many kernels listed in the menu.lst file? This box is a live update from opensuse 11.0.
View 13 Replies View Related