SUSE :: Installing NVIDIA Graphics Cards Gives Grub Error 13
Oct 27, 2009
So I installed openSUSE 11.1, and got everything from yast2 and then finally got nvidia.ymp or whatever. Bascially, the one click install. When i did that, I couldn't boot into the SUSE GUI. I could boot into the command line but I couldn't start X server.When I did try the Ec2-openSUSE-2.62.27.9 option, I get grub error 13. It says that the ex2fs file system is not supported, only I did not format it with ext2. I am completely stumped and I'm a newbie.
View 3 Replies
ADVERTISEMENT
Dec 11, 2008
I took the following path: Yast - Hardware - Graphics Card and Monitor; and it gave me message "the configuration is Framebuffer based and your system does not support changes for resolution and/or color settings". I verified my system's(dual boot system) graphics card using windows OS and it showed NVIDIA Quadro FX 570, but in X11 configuration it shows "Card: VESA Framebuffer Graphics" and the Properties tab is not active.
View 1 Replies
View Related
Apr 28, 2010
I revived my old desktop (failed psu), and installed debian squeeze using netinst. It has a nvidia geForce 7600GT card. The driver in squeeze does not work very well, so I downloaded nvidia driver-installer. When I run it, it comes back with an error saying the kernel (I assume the nvidia graphics kernel) is compiled with gcc4.3, but the system is using gcc4.4. Using synaptic manager, I installed gcc3.3, but same error.
Next I tried to uninstall gcc4.4 and it gave a warning the system might not be usable. I did not understand it, but I went ahead and uninstalled gcc4.4 and guess what, the system is not usable, and I have to re-install squeeze. Not a big loss, since I do not have much in it. How to install this nvidia driver, specifically, how do I get switch to gcc4.3 from gcc4.3? Also, the squeeze install gave me 2.6.33-trunk-amd64, and 2.6.33-3-amd64. How do I get rid of ...trunk-amd64? Do I just delete it from grub?
View 10 Replies
View Related
Sep 10, 2011
i just upgraded my pc to 12.1 milestone 5 when i went to play my fav game (Xonotic) it was all laggy at 1 fps. I realised the graphics card app wasnt working anymore.Can any 1 fix PS and i had to go on failsafe too. PS2 milestone 5 workes flawlessly apart from the gnome 3 bug at startup
View 2 Replies
View Related
Apr 11, 2010
After a PSU and motherboard failure, I'm about to spec out a new PC. The last time I looked, Nvidia was the preferred graphics chipset as they tended to support Linux better than ATI. Is this still the case?[url].... seem to have lots of ATI cards in stock but hardly any Nvidia (despite offering a similar sized range), but I don't want to get an ATI card if it's not preferred for technological reasons (or even FOSS ethical reasons!).
View 9 Replies
View Related
Dec 27, 2009
From what I've read there is no problem running one nvidia card on a crossfire motherboard, but not much information running two cards.Some context: I currently have a Core 2 Duo on a motherboard with an nForce chipset supporting SLI. I have 2 nVidia 9400 graphics cards not in SLI mode driving my 3 monitors.I'm toying with the idea of upgrading the CPU and motherboard (maybe the RAM if I go for DDR3), and am leaning (back) towards the AMD camp, however most of the motherboards for AMD CPUs that have 2 PCIe x16 slots also have Crossfire.
View 4 Replies
View Related
Nov 6, 2010
I have completed building gazebo, and everything was done successfully according to the following link [URL]... bot_Simulation , but when I tried to invoke gazebo using the command "gazebo /usr/local/share/gazebo/worlds/pioneer2dx.world" it returns the following error
[code]...
View 1 Replies
View Related
Aug 3, 2011
Before installing OpenSUSE I shrunk my Win 7 partition down in half, then created 3 partitions out of the new free space for /root, /home and /swap. I installed opensuse and when it got to the bootloader section I kept getting Grub error 17 - cannot mount selected partition, and so on. I made sure it was writing to the MBR and also into /boot if that makes a difference, but I did get a prompt that said YaST couldn't make changes to /dev/sda (I'm paraphrasing and can't remember the exact error message). At the moment I have suse installed and my windows partition intact, but no bootloader (not even windows one) so all I can do is boot to Live CD.
Below is the output of fdisk -l. There's quite a few more partitions than it's showing, sda3, sda4 and sda5 are my /home, /root, /swap and the other ones are windows partitions, like the system recovery along with the win7 install. During the suse install I formatted the home and root partitions with ext4 filesystem.
[Code]...
View 9 Replies
View Related
Jan 26, 2010
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies
View Related
Oct 3, 2010
I am having problems installing the graphics driver (from the Nvidia website) for my Nvidia Vanta card on Ubuntu 10.04. I disabled X via terminal and then I ran a Virtual Console. With the virtual console I ran the chmod command and the went through the installation. It did bring up a message with something about my distro not having a pre-configured script (or something like that) and asked me if I would like to continue anyway. I choose Yes and the installation failed.
View 2 Replies
View Related
Jul 25, 2010
I have Nvidia 8400 GS graphics card. I am using Fedora 13 on AMD phenom processor. I want to install drivers for my graphics card on fedora 13.
View 4 Replies
View Related
Jan 3, 2011
when i start uubuntu it automatically goes to tty with out letting me login. then when i press startx it says:
NVIDIA: failed to initialize the nvidia graphics device pci:0:13:0
nvidia: please check your systems kernal log for additional erroe
nvidia: messages and refer to chapter 8
nvidia: failed to initialize the nvidia graphics device!
nvidia: screen found, but none have a usable configuration
fatal screen error: no screen found
right before this i had activated a nvidia graphics device
View 9 Replies
View Related
Jan 14, 2010
im having an intel E2180 processor with 2 gb RAM and an nvidia 8400gs graphics card. Lately i installed Fedora 12 on my system and found that with default settings the desktop 3d is not working. so installed the kmod-nvidia using yum after following the instruction.i also edited the grub.conf file to rdblacklist=nouveau to blacklist nouveau drivers.
Then once i rebooted i found two kernels in grub ie the old one and the one with PAE extension. when i booted into the old kernel its Xwindows failed to load showing a black screen and when i tried the new PAE kernel it booted in 640 x 480 resolution. {earlier i was getting a resolution of 1440 x 900 on my 17" widescreen monitor}. it also showed that the nvidia drivers failed to load. I also read in some forums that the PAE kernels are for systems with 4gb+ of ram. So i thought it better to reinstall the whole thing.
then i reinstalled the whole operating system using my fedora 12 dvd and performed the 'upgrade or replace the existing linux distribution'. interestingly now my older kernel has disappeared and the PAE kernel is the one that is remaining.
[Code]...
View 1 Replies
View Related
Mar 16, 2011
Sometime back my Nvidia card blew up and I had to order a new one -problem was I had to run in Failsave graphics. If you have not change /etc/X11/xorg.conf and have not install any graphics drivers,
[Code]...
I started in Failsave graphics each fresh boot. New Nvidia card arrived today and installed but I cannot loaded the drivers. System/Admin/Additional Drivers tells me I have the Recommended Driver installed but when I go System/Admin/Nvidia Server Settings I'm informed You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server. I open terminal as root and type nvidia-xconfig and I get:
[Code]...
View 4 Replies
View Related
Jul 28, 2010
Re: nVidia latest Drivers - im trying to install a 9800gt nvidia graphics card on my ubuuntu i have been reading forums for the last 5 days and still no luck i managed to do a install and it is giving me the following errors distribution pre install script failed install failed /var/log/nvidia-installer.log unable to load kernal module 'nvidia,ko,
View 10 Replies
View Related
Apr 1, 2010
I installed a new graphics card (Nvidia GeForce GT240 1 Gb, 128bit DDR3) on my gigabyte VA900M motherboard, with my computer running a dual boot of windows 7 (64 bit) and ubuntu 9.10 (64 bit). The computer would not boot past the memory test stage. To solve this, i flashed the BIOS with the latest upgrade for the motherboard from the Gigabyte website. This still did not work, so, doing the usual "testing hardware combinations by unplugging and replugging", I removed 1 Gb of RAM, which solved the problem of booting past memory test (a case of too much memory?)
Problem: The problem now is, GRUB wont boot from the HD, unless I have the Windows 7 disk (or Ubuntu Live) in the DVD drive. If i dont press a key to boot from the disk, Grub will then load. how to make GRUB boot from the HD? Do I need to redirect/reinstall GRUB? Im pretty sure it is not a BIOS problem.
View 2 Replies
View Related
May 8, 2009
I am using fedora10 in my notebook. I installed nvidia-graphics driver as follows.
su -c 'rpm -ivh http://download1.rpmfusion.org/free/...ble.noarch.rpm'
su -c 'rpm -ivh http://download1.rpmfusion.org/nonfr...ble.noarch.rpm'
su -c 'rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-*'
Then i installed kmod-nvidia with yum su -c 'yum install kmod-nvidia' When i tried to open NVIDIA control panel, i got a message that nvidia-driver should be configured. Then i issued the following command as root.
nvidia-xconfig. The i rebooted the system. Now in the boot menu, i see two kernel informations as follows
Fedora (2.6.27.21-170.2.56.fc10.i686)
Fedora (2.6.27.5-117.fc10.i686.PAE)
If i boot my linux with first one, x windows starts, if i boot with the second one (previously default), the x-windows is not opening. Why this happens? So i booted my system with first option in the boot menu. The system booted and x.windows started but i am not able to use any software that uses opengl window. The glxinfo command gives me the following error.
[Code]....
View 3 Replies
View Related
Mar 15, 2010
So I've searched across these forums and haven't quite found the same problem I'm having. For the record, I'm running Ubuntu 9.10 So I built my new box, and my video card is a Gigabyte Nvidia GeForce 9600GT (GIGABYTE GV-N96TZL-1GI). I go to System > Administration > Hardware Drivers to install the drivers so I can use those fancy 3D effects. It tells me I need to restart, so I do.
When it comes up though, I get an error message about running in low graphics mode, the top 5th of my screen is blacked out, and the screen has been shifted so that the left boundary is in the middle, and the right boundary goes off the screen and back to the left side. It goes back to working fine (but without the fancy 3D effects) when I remove the drivers. Both drivers in the hardware drivers (185 and 173) have this problem. I'd post log files and such, but I'm at work right now.
View 14 Replies
View Related
Oct 20, 2010
I have a Slackware 13.1/64-current system running the 2.6.35.6 kernel that I have installed the most recent nvidia drivers for (as of yesterday or day before) 260.19.12. If I boot up into run level 4 after running nvidia-xconfig in a console and run glxinfo as root I get:
Quote:
bash-4.1# glxinfo
name of display: :0.0
Error: couldn't find RGB GLX visual or fbconfig
If I edit /etc/profile or /home/username/.bash_profile and add the following:
Quote:
export LIBGL_ALWAYS_INDIRECT=X
I have set both X=0 and X=1 as reported by [URL] I get the screen of information except it says
Quote:
direct rendering: No (LIBGL_ALWAYS_INDIRECT set)
my lspci -v for the graphics card looks like this:
05:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8500 GT] (rev a1) (prog-if 00 [VGA controller])
Subsystem: XFX Pine Group Inc. Device 2353
Flags: bus master, fast devsel, latency 0, IRQ 16
[code]....
I am sure I missing something from my xorg.conf but at this point I am not sure what I have been searching on this for days to no avail. From the log the only thing that looks like is a problem is it doesn't load the keyboard and mouse but it gets loaded later on in the file.
View 13 Replies
View Related
Feb 13, 2011
Before we start, I wanted to say I noticed the "Ubuntu cannot fix or improve these drivers." Please read anyways.
I've tried to activate the "ATI/AMD Proprietary FGLRX graphics driver" from the System>Administration>Additional drivers and it has an error halfway through the process.
I use an ATI/AMD Radeon HD 5770 in my computer (if that helps), and Ubuntu is on my USB(8GB).
The error message I receive (after awhile of waiting) is :
SystemError: installArchives() failed
View 1 Replies
View Related
Oct 23, 2010
Suse 11.0 nvidia software repository not working when the updater is run, and it gives an error message which indicates it must be out dated and no longer used. Here is the site in my repository for nvidia; [URL], I did try to add a new nvidia repository site with that Yast tool, but I could not get it to fully work. The new one I did find was as a ftp type, not [URL]. With this older Suse 11.0, and kernel 2.6.25.20-0.7-pae, then is it true that there may not be any more nvidia display driver updates available.? So then I should just remove that nvidia repository from the list, and be okay if the kernel does not update too much newer version, right ?
View 4 Replies
View Related
Jan 14, 2010
Earlier today I installed SUSE 11.2 with KDE and everything worked fine at first. Then I started monkeying around. First I tried getting my XFI extremegamer to work right and that didn't go well. So I started from the install disk and repaired the install. That messed up GRUB so I couldn't choose to boot Windows 7. Tried fixing that with super GRUB disk (USB) and now GRUB gets error 22. I found that the most common cause is deleting the linux partition in windows.
I also need to install stuff, like drivers and other programs. The problem with my sound card is that I can't even hear anything out of it outside of the test sound. The included media player doesn't get anything, neither does online site like ...... On a side note, I'm thinking about just reinstalling linux and starting fresh. Considering that I'm such a linux n00b, would it be better to use KDE or GNOME?
View 10 Replies
View Related
May 9, 2011
My situation is like so: I have two NVIDIA GTX 460 graphics cards running the latest (260.19.06) proprietary drivers. I SLI these together under Windows 7 for gaming. However, for day to day usage I have Ubuntu 10.1 running on my two monitors using twinview.
My problem is that the xserver refuses to load (I get the "screens found, but none have a usable configuration" error) when both my graphics cards are plugged in and powered; if I remove the power to one, the system works fine. If I was just using Ubuntu, I would simply leave one unplugged but, because I'm not, its a pain to have to plug/unplug one every time I want to switch operating system.
I have tried every modification to the xorg.conf file that I can think of and a few more found in the documentation and via google, all to no avail. I have also tried everything again with twinview disabled and only one monitor plugged in.
I am aware that SLI isn't compatible with twinview, I don't really need to use it, although it would, of course, be nice.
View 3 Replies
View Related
Aug 11, 2010
I am installing SLES on a new server with raid 05, after I went with the setup it copies all the files until It gets to install grub. It gets me an error message installing grub and it wont let me move forward.
[code]...
View 5 Replies
View Related
Feb 23, 2010
Is it possible to run a box with 2 graphics cards in it with one card being a PCIe x16 and the other being a PCIe x1?
Unsure whether this would cause all sorts of problems with ubuntu and/or the nvidia drivers (2 quatro NVS 290's).
View 1 Replies
View Related
Jan 9, 2010
I know ATI cards have not worked well with Linux in the past, however this may have changed since AMD bought out ATI and their being improvements in the OpenGL platform. (version 3.1/3.2) So... I am wondering. Is AMD planning to add more features to their cards by offering customer good solid drivers for use on the Linux platform(s)? I know that has always been one of their pros making good CPU chips that work well with Linux. But my main question is, do the 5xxx series cards work (well) in Linux? Has anyone every tried Linux with one of these card or are their any drivers out there?
View 4 Replies
View Related
Jun 28, 2009
Is there a list of supported hardware anywhere?Ubuntu directed me to Gentoo-Wiki, but there was no page with the name...Anyway, I have Intel extreme graphics, whih I know isn't the best, based on the new ones out there,Does anyone know if it's supported for desktop effects?Or will I Have to buy a new one..I'm Okay if it's a bit slow, but I just want to know if it will run..
View 1 Replies
View Related
May 21, 2009
I'm using Ubuntu 9.04 with 2 graphics cards (ATI X1300 both).After installation 1 monitor on one card worked fine.I also managed to start Ubuntu with dual monitor support (on one graphics card).Now I want to activate my 2nd graphics card in order to use my 3rd monitor too.
View 2 Replies
View Related
May 7, 2010
I have an ACER Veriton 7600GT, with an internal Intel 82865G, which drives the main monitor and a Radeon 9250 which drives a second monitor (on its first port) - it all works fine under XP.I've had no luck at all trying to get any version of linux to cope with this. I've been trying live cds..PCLinuxOS and Mandriva will not boot except in 'safe mode' and then run with the wrong resolution for the main monitor and ignore the second one.
Ubuntu boots OK for primary but ignores the second monitor (I'm not keen on ubuntu anyway because of instability on other machines).OpenSUSE boots OK for primary and seemed to offer some hope of setting up the second monitor. However, after this discussion it seems to have come down to trying the latest development milestone.There is quite a lot of diagnostics in the above discussion and I'm wondering if anyone here has any experience of this sort of thing? The problem seems very fundamental in the sense that (even with all the tests) I've never seen the second monitor even receive a signal and wake up under any version of linux.
View 4 Replies
View Related
Jul 20, 2010
I have a poweredge t110 and am trying to install suse 11 on my server. I am getting a error 17 grub. It will not allow me to get any farther, I have three 250gb HD installed.
View 1 Replies
View Related
