I've just found that one of my email addresses with an auto-reply gets stuck in a loop when it receives email from senders who also have an auto-reply set up.Is there an easy way for me to set Postfix so that it only sends one auto-reply email or so that it only sends a maximum of 1 auto-reply message per day to the sender?
View 1 RepliesI have configured mail server using Centos. I have also used procmail and used squirrel mail as webmail browser. I want to provide auto reply facility to my users? What should I do?
View 5 Replies View RelatedHow to set outgoing mail limit? And what is the default value?
View 2 Replies View RelatedVery recently I started using Evolution as my mail client. Before that I was using MS Outlook. Everything seems to be OK with Evolution but I find 2 startling limitations.
1. How to set up out of office auto reply
2. What is the equivalent of mail archive.
I tried to google it and looks like many people have the same issue but no proper solution. Is this really a limitation with Evolution?
i have a mail server that uses Postfix as a mail server, it runs ok, but i need to add some features to a specific users only.what i need to add is Auto-reply message for some users only.
View 5 Replies View RelatedDoes anyone know of a way to configure dovecot for Auto-Reply Out of Office messages? Preferably one that clients can do on their own from their PCs.
View 1 Replies View RelatedHow do I make my postfix mail server auto delete mails from user mailboxes after say 1 or 2 months?
View 1 Replies View RelatedI have been trying to increase the message_size_limit on my Debian 2.4.26 box with postfix 2.3.8. For example, I set message_size_limit and mailbox_size_limit to 104857600 (100m) and restart postfix. Running postconf -n confirms that it has changed. However when I send a test message it kicks it back saying the message size limit is 16777216 (16m, which is, incidentally, the default value of the berkeley_db_create_buffer_size parameter)
View 10 Replies View RelatedI notice that when someone sends a message from my Postfix server & it can't find the destination server or if there is a incorrect domain recipient entered by mistake, it sits in my Postfix queue for days. I think perhaps 4-5 days for some reason. I was wondering if I could shorten the time so the sender gets a delivery failure message kicked back to them in 24 hours rather than waiting 4 or so days.
Code:
I upgraded postfix to 2.8 today after the security bulletin from the list.
now I get the following error:
'postfix/local[2442]: fatal: unable to determine open file limit'
I can receive/send mail, it just wont let me deliver locally
uname output: 2.6.37-1-686 #1 SMP Tue Feb 15 18:21:50 UTC 2011 i686 GNU/Linux
I'm working on a few servers running centos and using postfix. I don't know what the exact problem is, but we are having problems with the disk space being maxed out at 100 gigs. What we think the problem is...is that postfix is either caching or logging all the emails we send out. We sent 250k emails (500kb apiece) over the weekend and we were having trouble with that quantity. It seems some of those email were queued up for retry sending...but we didn't have sufficient disk space for that? Something broke - I'm not sure what.
What I want to do is to find and change the config file that has to do with postfix email retrying - possibly limit this (not sure if this will fix my problem). Or, turn off /limit any way that postfix logs/caches emails so that it won't take up all the disk space when queued up for retry... Again, I'm totally lost here (on both what's going on, and how to fix it). I'm not sure what more information is needed to address this problem
I have a problem concerning the vacation(auto response). I got a mailserver(smtp.mydomain.com), pop3/imap-server(mail.mydomain.com) webserver(www.mydomain.com, with postfixadmin on it). I use Debian 5.0 So it's like this, I receive mail to smtp.mydomain.com, it get checked for spam with amavisd-maia(Maia Mailguard), then delivered to the pop3/imap-server. I'm guessing there's something wrong with my postfix setup. I activate auto response for my account, when I get a mail it says this at smtp.mydomain.com:
[Code]...
I am new in linux,I installed apache-tomcat on fedora.I can view all web pages on localhost:8080 but when I try to view them by server's url address from another computer, I don't get respond.Can it be a firewall problem or something else?
View 4 Replies View Relatedmy command is the following:cp -LRuvp --reply=yes /mnt/filename /mnt/usbdrive/filename 2>/mnt/usbdrive/ error.log.i get "the reply option is deprecated try using i or f instead" the problem with the above is the only thing i get in my error log is: "the reply option is deprecated try using i or f instead" and if i use "i , f , /cp , etc..." nothing is generated in my log..what i want to do is copy file from source with "LRuvp" to destination and appened out put to "error.log"
View 14 Replies View RelatedHere is what i do: make clean make makefiles CCARGS='-DEF_CONFIG_DIR="/opt/product/postfix-2.6.5/etc"
-DEF_COMMAND_DIR="/opt/product/postfix-2.6.5"
-DEF_DAEMON_DIR="/opt/product/postfix-2.6.5/libexec"
-DEF_MAILQ_PATH="/opt/product/postfix-2.6.5/bin/mailq"
-DEF_DATA_DIR="/opt/product/postfix-2.6.5/lib"
-DEF_NEWALIAS_DIR="/opt/product/postfix-2.6.5/bin/newaliases"
[Code]...
make install then i got this error: postfix: fatal: chdir(/usr/libexec/postfix): No such file or directory make: *** [install] Error 1 I don't understand why it's checking the usr/libexec folder for the daemons although I've set the folder to /opt/product/postfix-2.6.5/libexec in the makefile. Here is also the cat of my makedefs.out:
[Code]....
Sam and I are going to the fair on sunday around 2 if anyone wants to join us. Lets get some deep fried butter.As you can see the first message is cut off in the last message, it just says Sam... no plus sign or anything for me to be able to view the whole message including everything that was said throughout multiple emails. This happens to every single one of my emails, if someone replied again to this the original message just would no longer be on the email at all and I'd have to search it out in previous emails which is a pain.
View 2 Replies View RelatedDoes anyone know if there's a way to make nano support auto-complete and auto-bracket closing?
View 1 Replies View RelatedI code primarily in jQuery/JavaScript, and I'm looking for a text editor for Linux that has auto-indent and auto-outdent (seems to be tough to find that). Any suggestions? I've checked Gedit, Cream, vim, Bluefish.None of them seem to have this feature.
View 2 Replies View Relatedmy secure log is flooding with these messages..
sudo: pam_limits(sudo:session): wrong limit value 'unlimited' for limit type 'hard'
Dec 28 22:42:29 yn54 sudo: pam_limits(sudo:session): wrong limit value 'unlimited' for limit type 'soft'
Dec 28 22:42:29 yn54 sudo: pam_limits(sudo:session): wrong limit value 'unlimited' for limit type 'hard'
This problem one day popped out of nowhere in my ubuntu 9.04 firefox browser that I could not submit my reply on any forums. So I changed my browser to epiphany and then to opera but all failed then I installed arora and it worked. I don't know what is the problem with other browsers I just cannot submit a reply on any forums.
View 8 Replies View RelatedI have a VPS server with 512 MB memory. The php.ini is set so script memory limit = 16 MB. However, I have noticed in my top report, instances like the following:
Quote:
5484 coldclim 25 0 46476 32m 5920 R 0.0 6.4 0:00.93 php
The bold number of 6.4 is the % of sever memory this process is using. 6.4 % of 512 MB of memory is about 32 MB of memory, so it appears that this isn't being limited by php.ini. Am I correct? This leads to the next question: Is there some way to limit the amount of memory a single suphp process can use? (Basically, something like the setting in php.ini which limits suphp processes in the same way.)
is there any HOWTO for configuring Webmin Postfix server with multiple postfix virtual hosts? Seems to be a tough challenge to set it up without any easy manual..
View 1 Replies View Relatedso i set out to change the default smtp port the server uses because my ISP blocks port 25 and i need the email to work in outlook. this morning i could receive email, but not send it. so i did some research and thought that i needed to edit the master.cf file in /etc/postfix/ by commenting out this line: smtp inet n - n - - smtpd -oand replace it with587 inet n - n - - smtpd (587 being the port i want to use)somewhere along the lines postfix server stopped running and now i cannot get it to start.if i try using SSH it crashes immediately and if i restart it in simple control panel nothing happens
View 7 Replies View RelatedI recently moved over user from an old box running postfix(v 2.0.16) over to rhel 6 running postfix (v mail_version = 2.6.6). ive tried to make sure all the files are of correct permissions and that the main.cf file is configured corectly. However there is something wrong as when i run postfix: service postfix server i get no error but when checking the status:service postfix status i get: master dead but pid file exists Looking into /var/log/mailog i find this line being the issue:
Feb 25 16:24:39 puny1 postfix/master[3517]: fatal: fifo_listen: create fifo public/pickup: Permission denied
I gather this is a file permission issue and ive tried to make sure the public folder in /var/spool/postfix is correctly set but still no avail.
I was trying to write a graph plotting program with c++. I need to convert the infix expression from user to postfix expression for quick evaluation. However, the evaluation of postfix is kind of interpreted, and thus kind of slow for evaluating huge number of values. Say if I plot an implicit function the penalty is quite huge. Is there a way that I can compile the infix expression from my running graph plotting application for high speed evaluation.
View 6 Replies View RelatedI have isntalled a server with Centos 5.2 OS, now I would like to switch from the default sendmail to postfix doing a yum install postfix I've noticed there is already available an rpm version for the OS but I would like to compile my own 2.5 version, I've noticed compiling from source does not allow me to use the mail switcher to tell to the system I'm gonna use Postfix instead of Sendmail as the default MTA while this is possible when I use the "official" rpm version of the package. Now my question is this, would this be a problem? There is some specific procedure/best practice I should follow? Or once compiled and configured Postfix I can safely disable/uninstall sendmail?
View 6 Replies View RelatedI would like to limit any process from using more than 500 MB of RAM. AFAIK this is done using RSS in /etc/security/limits.conf but the process called gnome-panel apparently is using 618436 kB of VmRSS. How can this be ?
Quote:
/etc/security/limits.conf
* hard rss 512000
Quote:
username@debian:~$ cat /proc/3002/status
Name:gnome-panel
State:S (sleeping)
Tgid:3002
[code]....
I have install ubuntu 9.04 on my machine. When I am trying to ping google.com, I do not get ping reply but I am able to browse Internet. Also, I am able to ping any of the local machine on LAN.
View 9 Replies View RelatedFirst of all I'd like to let you know that I'm not very experienced with Linux,and I am using Ubuntu 10.04.1 LTSI'm also not really sure if this is the proper section in which I should post.I'm running a Minecraft server,and I'm trying to make a PHP script grab the reply from a screen.Is there any way to do this?Is there any way to grab the names "name1", "name2" and "name3"?The amount of names can go up to 35 on my server
View 2 Replies View RelatedI posted a topic in another section and tried to reply. The message pane opens and the cursor is there, but when I start typing the cursor stays put and nothing shows up.What to do? I am doing this reply from Windows right now.
View 3 Replies View Related