General :: Auto Delete Mails From Postfix Server After 1 Month?
Jun 21, 2010How do I make my postfix mail server auto delete mails from user mailboxes after say 1 or 2 months?
View 1 Replies
ADVERTISEMENT
General :: Fetchmail Does Not Delete Mails Received Mails From Server
May 2, 2011I use this command to fetching mail from gmail it work good but it does not retrieved mails from server as I read from manual.
Quote:
fetchmail -d0 -F -K pop.gmail.com
What is wrong and what should I do?
Server :: Postfix Rejecting Mails
May 17, 2011I've enabled popb4smtp in my mail server. Is this because of the IP 117.58.246.10 don't have a dns record? How can I sending email from this type of Ip which don't have dns entry?. But if I enable SMTP auth I can send email form this same ip. Another thing is I can connect to port 587 from the email client to send email but can't connect to port 25.
View 1 Replies View RelatedServer :: Unexplained Mails In Postfix Queue / Get Rid Of Them - Why Is So?
Jul 21, 2010On the postfix mailserver of our company I'm seeing several of these messages in the deferred queue (apologies for the terrible formatting, I couldn't get it any better) code...
looking at the headers, there is probably something wrong with our DNS-server, which we will investigate, but I still have some questions about the failure notice:
- why are the failure notices refused? Is that a fault on the sender side, for example sending the wrong return address?
- where does this mxcorp1.pacific.net.sg[192.169.41.21] come from anyway? I don't see it anywhere in the headers.
Server :: Postfix As Receiving Mails For Multiple Domains?
Nov 15, 2010I have configured postfix to send/receive mail from/to for two domains we manage. [URL] and [URL] Most of the cases there is no issue sending out or receiving emails. However, a few users of domainY.com complained that their senders were not able to sent them email. after much investigation, we started thinking that the mailserver failed to send us email may the failing on doing a SMTP Banner issue.
Is there anyone who knows how to deal with this SMTP banner issue with multiple domain. We want different SMTP banner when doing EHLO on different server.
530 mail.domainX.com ESMTP MailEnable Service, Version: 1.981-- denied access at 11/16/10 10:51:21
530 mail.domainY.com ESMTP MailEnable Service, Version: 1.981-- denied access at 11/16/10 10:51:21
Server :: Auto-Reply Incoming Mails
May 6, 2010i have a mail server that uses Postfix as a mail server, it runs ok, but i need to add some features to a specific users only.what i need to add is Auto-reply message for some users only.
View 5 Replies View RelatedServer :: Enable Ldap Users To Send Mails In Postfix?
Nov 7, 2010So, I have mail server ( posfix ) and ldap server, they works fine. I can add/delete users from posfix, and they can send / receive mails to/from any address. At same time my ldap server works fine, I have also users in it, my "simple" question would be...if I have user "test1" in ldap, what I have to do to connect--enable that user to send mails ?
View 1 Replies View RelatedServer :: Move Mails On Exim Server To Postfix Server?
Jan 12, 2010how can I best transfer my mails that are sitting on my old exim server to my new postfix server?
View 1 Replies View RelatedSoftware :: Virtual Users - In Postfix Server While Configuring Outlook For Receiving Mails?
Mar 21, 2011I have configured dns, postfix, dovecot, https, squirrel mail on fedora11 everything working very well. While configuring out look the same domain users getting mails the virtual users not receiving mails it showing pop3 error. But he can able to receive mails in his home directory.
View 1 Replies View RelatedGeneral :: Postfix And Gmail / Dropping Approx 50% Of Mails With An Error?
Nov 14, 2010I've setup postfox on Fedora 13 in order to send emails to and from gmail. I thought this was working, but it is dropping approx 50% of mails with an error. The other 50% work OK. It seems completely random.
I've read the link but I stil dont quite understand.
My machine is just a PC, on talktalk's network in the UK.
I use dyndns to allocate a DNS alias (well several actually) to my dynamic IP address - not sure if this is relevent.
Is it failing due to a reverse DNS lookup on the dyndns host? Or is it because it cannot resolve my localhost.localdomain?
I used to have this running on opensuse and swear it used to work 100% of the time.
What am I doing wrong?
Quote:
Nov 14 18:12:40 linuxserver1 postfix/smtpd[14619]: connect from localhost.localdomain[127.0.0.1]
Nov 14 18:12:40 linuxserver1 postfix/smtpd[14619]: 367D428388: client=localhost.localdomain[127.0.0.1]
Nov 14 18:12:40 linuxserver1 postfix/cleanup[14622]: 367D428388: message-id=<20101114181240.367D428388@linuxserver1.localdomain>
Nov 14 18:12:40 linuxserver1 postfix/qmgr[2834]: 367D428388: from=<myaccount@gmail.com>, size=3309455, code....
General :: Postfix Logs Flooded From Excessive Mails / Solution For This?
Apr 13, 2010I view my /var/log/maillog and see tons of lines like this code...
I think those are some kind of SMTP attacks from this host by I tried to block hit with Iptables but it seemes to peace them off and they keep coming...!
please some kind of postfix-configuration solution?
Server :: Copy / Backup Postfix Mail Queues And Paste Folder Back In After Done Migrating All Users And Mails To A New Mailserver?
Apr 25, 2010can i just copy/backup postfix mail queues in /var/spool/postfix and paste that folder back in after i done migrating all users and mails to a new mailserver?
View 3 Replies View RelatedFedora Servers :: Postfix Server "reputation" / Mails Are Blocked?
Apr 21, 2009I've got a Fedora postfix server that I just upgraded from 9 to 10 using preupgrade. Starting yesterday, some messages were rejected by servers because the IP address had a poor "reputation". The odd thing is, the IP address they're registering isn't the IP address the server is sending from.
When I look at the full headers of our outgoing e-mail, the e-mail is listed as coming from ***.***.***.11, which is the correct address. But these services are somehow tying the e-mails back to ***.***.***.12, which is used for a different purpose entirely. Since this *.12 address doesn't match the MX record, I'm assuming that's why the mails are being blocked, but I'm not sure how the mails are being identified as coming from that address in the first place. It's odd that this just started when I upgraded.
Server :: Postfix - Dovecot - Postfixadmin And Vacation (auto Response)
Feb 17, 2010I have a problem concerning the vacation(auto response). I got a mailserver(smtp.mydomain.com), pop3/imap-server(mail.mydomain.com) webserver(www.mydomain.com, with postfixadmin on it). I use Debian 5.0 So it's like this, I receive mail to smtp.mydomain.com, it get checked for spam with amavisd-maia(Maia Mailguard), then delivered to the pop3/imap-server. I'm guessing there's something wrong with my postfix setup. I activate auto response for my account, when I get a mail it says this at smtp.mydomain.com:
[Code]...
Server :: RHEL Auto Delete Files With Full Hard Drive
Jul 13, 2010I experienced a full hard drive yesterday due to a massive error_log. We took care of the errors, but later found out we were missing files, including a MySQL database table. Having a shopping cart and ecommerce stuff on the site, we found that some of those files were missing, too.Does RHEL 5 have some sort of feature for automatically deleting files when the partition is full? If it does, I want to turn it off.
View 4 Replies View RelatedGeneral :: Set An Auto-reply Limit For Postfix?
Jun 17, 2011I've just found that one of my email addresses with an auto-reply gets stuck in a loop when it receives email from senders who also have an auto-reply set up.Is there an easy way for me to set Postfix so that it only sends one auto-reply email or so that it only sends a maximum of 1 auto-reply message per day to the sender?
View 1 Replies View RelatedProgramming :: Bash - Use The Call Command (displays The Current Month And The Next Month)?
Mar 8, 2011how i can use the cal command so it displays the current month and the next month, i know you can use cal -3 9 2007 to show the previous current and next but i just want to display the current and next.
View 9 Replies View RelatedUbuntu :: Postfix Not Forwarding E-mails Properly
Sep 9, 2010I have Postfix set up to forward e-mails to two different addresses. This is my /etc/postfix/virtual:
Code:
I'm forwarding the message back to myself because that's the only way I know if the original message is even getting delivered in the first place.
The problem is that the e-mail isn't making it into my GMail inbox. I've checked my spam folder and it isn't there. And bafflingly, according to the logs, the message does seem to be getting sent:
Code:
Ubuntu Networking :: Traffic Monitor - How Much Data Downloaded/uploaded On An Interface This Month And Previous Month
Nov 20, 2010I'm looking for a powerful network traffic monitor that can do all of the following (or at least a combination of tools that can do the following):
Tell me how much data was downloaded/uploaded on an interface this month and the previous month tell me how the traffic was used throughout the monthshow which internal IPs (IPs in the 192.168.1.0/24 network) used how much traffic show which ports/protocols on those IPs used all that traffic
Hhow LIVE traffic flow statistics that can tell me total speed of traffic going through an interface as well asshow which internal IPs (IPs in the 192.168.1.0/24 network) are using how much of the traffic show which ports/protocols on those IPs are using that traffic
This tool will run on a linux router through which all my internal PCs are connected to the Internet. This means the tool(s) need to work with NAT (traffic being forwarded and not necessarily destined for the interfaced being monitored).
The distribution being run doesn't have a package manager so any packages or dependencies have to be manually compiled and SCPed over file by file. For this reason, the tool/tools need to be simple (things like vnstat, not things like ntop that have their own web interface).
I know that vnstat can tell me the first bullet point so it's only there incase there's a tool out there that can do everything. If there's a tool that can only do the second or third bullet point, that's great too - I'll just keep using vnstat and look for something else to do the other task.
Networking :: Block Sending Mails Via Telnet In Postfix?
Jun 16, 2011I implemented postfix as mail gateway but i need to block the ability to send
mails via telnet
How can i achive this?
Networking :: Postfix - Accepting Mails For A Concrete Recipient?
Sep 4, 2009we have a Postfix mail relay server. Not to be an open relay we use check_sender_access restriction with allowed sender domains. Is there a way how to configure postfix to accept mails from any domain for a specified recipient? Something like
Code:
if (recipient_address==host@mydomain.com) accept; We have an admin mailbox and we need it to be accessible from everywhere.
Software :: Postfix -- Mails Duplicating Due To Lock Files?
Mar 3, 2010Today I got a call from our chairman saying that he gets duplicate mails. When I checked the postfix logs, I found that it is the locks that are creating problems. The mail which duplicated was to an alias which included our chairman. In that alias, the mailbox of a user was locked since he was receiving his mails (I use dovecot for mail distribution), and hence the lock was on for that mailbox. When postfix tried to deliver the mails, it encountered the lock and the mail delivery was stopped, thus by requeuing the specific mail. While postfix retried the delivery, it found another lock with another mailbox and again the delivery was stopped, thus sending the mail back to queue
View 5 Replies View RelatedSoftware :: Postfix Not Forwarding E-mails Properly / Sort It Out?
Sep 9, 2010I have Postfix set up to forward e-mails to two different addresses. This is my /etc/postfix/virtual:
Code:
jason@woollymammothlabs.com jason@woollymammothlabs.com, jason.swett@gmail.com
I'm forwarding the message back to myself because that's the only way I know if the original message is even getting delivered in the first place.
The problem is that the e-mail isn't making it into my GMail inbox. I've checked my spam folder and it isn't there. And bafflingly, according to the logs, the message does seem to be getting sent code...
General :: How To Block User From Sending Out Mails But Still Able To Receive Mails
Mar 19, 2010am using qmail and have webmin, all is running smoothly, but i have users spamming other staff accounts.The question: How do I block a user from sending out mails but still able to receive mails. Just denying access to sending mails?if anyone can guide me to do it via terminal as well as webmin.Why webmin you ask, because I have tried it once it works but sadly it block both incoming and outgoing mails.
View 3 Replies View RelatedGeneral :: Send Mails From Server With One Attachment?
Apr 5, 2011My requirement is i want to send mails from server to all my employess with one attachment file for every monday and friday like scheduler.. how it is possible through bash script.
View 7 Replies View RelatedGeneral :: Stopping Duplicate Mails Being Sent From A Server?
May 11, 2010I have report running through a Unix server. In this it takes out certain data of the database and sends it to each of the user's mailbox. But if some user replies or has set his out of office reply then this server keeps on sending h the same mail again and again. I need stop it.
View 5 Replies View RelatedGeneral :: Configuration Required To Send Mails From Server
Nov 17, 2010I have a linux database server (ver 2.6.18-92.el5xen) which i want to configure for sending mails as and when some errors are written into some log files by an oracle process.when i just try to run this command mailx -s "test.it just does n't show any output and kind of hang.Pls tell me the step by step process for configuring the server so as to send mails from it. Also I am not aware if the required rpm are installed in the machine or not.
View 9 Replies View RelatedServer :: Keeps One Month Data - Rsync?
Jul 19, 2011My rsync takes backup of everything from the differenct linux servers to my backup device which is 2 TB only .Since it takes almost full backup of source , it consumes space lot in the backupdevice. So i wanted to keep all my backup files of one month old latest files in backup device, it should remove all files more than one month data.
View 2 Replies View RelatedUbuntu :: Configuring Webmin Postfix Server With Multiple Postfix Virtual Hosts?
Sep 25, 2010is there any HOWTO for configuring Webmin Postfix server with multiple postfix virtual hosts? Seems to be a tough challenge to set it up without any easy manual..
View 1 Replies View RelatedCentOS 5 :: Postfix Mail Server Will Not Start Tried To Change Postfix Smtp Port?
Oct 4, 2010so i set out to change the default smtp port the server uses because my ISP blocks port 25 and i need the email to work in outlook. this morning i could receive email, but not send it. so i did some research and thought that i needed to edit the master.cf file in /etc/postfix/ by commenting out this line: smtp inet n - n - - smtpd -oand replace it with587 inet n - n - - smtpd (587 being the port i want to use)somewhere along the lines postfix server stopped running and now i cannot get it to start.if i try using SSH it crashes immediately and if i restart it in simple control panel nothing happens
View 7 Replies View Related