I have install ubuntu 9.04 on my machine. When I am trying to ping google.com, I do not get ping reply but I am able to browse Internet. Also, I am able to ping any of the local machine on LAN.
View 9 RepliesIf I type
Code:
$ ping [URL]
or even
Code:
$ ping google.com
should I receive a reply?
I have configured DNS on ubuntu server 8.10 and it is working fine. There is one question I have though. Everytime I ping a LAN device by name I get the reply from the server with only the IP Address.
View 2 Replies View RelatedI was using my ISP's DNS server. When I would ping something that doesn't exist, e.g. blahtest.com, it would reply anyway. When I tried to go to the site in a browser, it was some page like "I hope we can help you find what you're looking for". I thought that was ridiculous, so I changed to OpenDNS's DNS server.
View 4 Replies View RelatedI run an centos server. From the console I can ping google.com and get a reply. But when I ping another address say xyz.com, the IP address is resolved (11.22.33.44) but there is no reply. In the same network in our office from my desktop I ping [URL] and there is a reply.I turned of the firewall but still the same problem.
View 9 Replies View RelatedI am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
I am new in linux,I installed apache-tomcat on fedora.I can view all web pages on localhost:8080 but when I try to view them by server's url address from another computer, I don't get respond.Can it be a firewall problem or something else?
View 4 Replies View RelatedI have two machines on this network, one running Ubuntu and the other running Fedora.
When I'm using the Wireless network on the Ubuntu machine, I cannot ping the Fedora machine. Everything else works. I can browse the net fine.
If I switch over to the Wired Network then I can ping the other machine.
I don't understand why ping doesn't work only over the Wireless. I can ping the router so I'm guessing it's getting blocked by the router but I didn't block ICMP traffic.
I tried asking on IRC and they ran out of ideas too to find out where the problem is.
When i ping www.google.es, i get something like:Quote:
ping www.google.es
(wait 20 seconds)
64 bytes from 66.249.92.104: icmp_seq=2 ttl:53 time=80 ms
[code].....
This applies to my 2 opensuse PC's, my Windows PC is fine.I can ping a hostname, say "PC1" but I can not ping PC1.domain.local (even the host PC can not ping it's own FQDN). When I ping just the hostname the ping stats even list the FQDN.Onto the next issue, since all my PC's, have the domain prefix domain.local, my Synology can not. I can ping it's IP and that is it. I can resolve it's name with nmblookup just fine tho and that is what is killing me. How is this not resolving.Even weirder, I can browse to "Synology" in Network Servers under places on the slab.
View 3 Replies View RelatedEven ping google's ip address doesn't work. unknown host error using backtrack4 able to browse net with these settings.
My network settings:
What's the problem with these settings...
Ive got a problem on my server ....installed Debian 5 , Webmin and than syscp settung up syscp ready ....
I try to ping "localhost" ansver ping: unknown host
I try to ping "localhost." there is a host with IP 127.0.0.1
I need it to change it in "localhost"
Is that the bind9 maybe?
I have a debian server installed with a static ip. Now i am able to ping my ip, but when i try to configure a domain name with the nameserver as my ip, i am not able to ping the domain name
eg:
I just installed my first EVER bind DNS server. I am running bind9 on Ubuntu 10.04. Everything seems to be working great except one thing: If I ping a host that I have set up in bind by its HOSTNAME the pings take 5-6 seconds to reply/print to the screen between each echo response. If I ping by the host's IP address, they echo back very quickly.
I have read that IPv6 can cause this, but I have disabled it in /etc/sysctl.conf and the problem still exists.
I know everyone says this can't be a DNS issue, but this never was an issue with dnsmasq (which i was using prior), and it doesn't make sense that the ping are ONLY slow when pinging by hostname and not IP.
Configs below:
Ping by hostname - there is a 5-6 second delay between each one of the responses:
Code:
Ping by IP - the responses come VERY quickly one after the other:
Code:
/etc/resolv.conf:
Code:
Code:
rev.0.168.192.in-addr.arpa:
Code:
So, I have an Virtual Machine running CentOS 5.4. It sits behind a hardware firewall which also does NAT'ing. I've set up plenty of these, so I know for sure the firewall and NAT rules are set up correctly. From the host, I can ping anything in my subnet and the gateway. But I can't ping anything else beyond the gateway. I can perform DNS queries and when I try to ping, it finds the appropriate IP address.But from the outside, I can ping the PUBLIC address (It's a 1 public to 1 private address NAT, not 1 public to multiple private). I've tried it with IPTABLES on and off, with no change.
View 11 Replies View RelatedI have Mandriva One 2009.0 (192.168.1.100) on one box and Mandriva Free 2010.0 (192.168.1.118) on the other. I can ping router (192.168.1.1) from both of these boxes but I can't ping one box to the other and the other way around. What's going on?.
Do I have to change some settings in router?. Or is it firewall issue on those two machines?. Both of these boxes are connected by cable. Symbol of the router: TL-WR340G.
First of all I'd like to let you know that I'm not very experienced with Linux,and I am using Ubuntu 10.04.1 LTSI'm also not really sure if this is the proper section in which I should post.I'm running a Minecraft server,and I'm trying to make a PHP script grab the reply from a screen.Is there any way to do this?Is there any way to grab the names "name1", "name2" and "name3"?The amount of names can go up to 35 on my server
View 2 Replies View RelatedI posted a topic in another section and tried to reply. The message pane opens and the cursor is there, but when I start typing the cursor stays put and nothing shows up.What to do? I am doing this reply from Windows right now.
View 3 Replies View RelatedI've noticed that after the initial startup and updates, if I shut down ubuntu I cannot get back on. The loader just gets stuck at the "Logo screen".When run in recovery mode I recieve the following errors (a few in duplicate):"mount all main process (556) terminated with status 2"."mount all-shell (559) terminated with status 2"."could not get password database information for UID of current process: user '???' unknown or no memory to allocate password entry".After this I'm left without even a command line and nothing I type does anything.I've never had problems with ubuntu in the past after using it for about 6 months but this is the first time I've tried running it alongside windows 7, could that be the cause?
View 6 Replies View RelatedVery recently I started using Evolution as my mail client. Before that I was using MS Outlook. Everything seems to be OK with Evolution but I find 2 startling limitations.
1. How to set up out of office auto reply
2. What is the equivalent of mail archive.
I tried to google it and looks like many people have the same issue but no proper solution. Is this really a limitation with Evolution?
anyone can explain me why whois sometime does not reply for some ip only ?
View 4 Replies View Relatedmy command is the following:cp -LRuvp --reply=yes /mnt/filename /mnt/usbdrive/filename 2>/mnt/usbdrive/ error.log.i get "the reply option is deprecated try using i or f instead" the problem with the above is the only thing i get in my error log is: "the reply option is deprecated try using i or f instead" and if i use "i , f , /cp , etc..." nothing is generated in my log..what i want to do is copy file from source with "LRuvp" to destination and appened out put to "error.log"
View 14 Replies View RelatedThis is the issue: when replying to someone, the cursor defaults to the beginning of the date line (on date this and this, that and that wrote:...), and I have to press enter twice, and then up-key twice, to bring it to a proper situation where I can start replying.
Today the issue is a bit better, since I am using GVIM for editing, so I can just press O (or make any other good mapping for my needs), but I am using GVIM only for English emails (since with Hebrew it is not really... hmm... useful, still), so the problem remains.
I know it is a very "little" issue - but come on, 9 years and no solution?!
In general, it would be nice to allow one to customize completely the "date line"; for example, to allow one to decide that his reply line will begin like this:
(two empty lines, after the cursor!)
=====
Am Sonntag, den 09.05.2010, 13:04 schrieb Asaf Chertkoff:
> ...
> ...
Since upgrading to 11.04 yesterday, nauilus has been acting strangely. It takes about 30 seconds for a right click on the desktop to respond, whereas before it would've taken 1 or 2. Also, when trying to open a directory, say, the Home direcotry accessible from the launcher,it takes about a minute to open, which is odd,because all of my other applications (Chrome, Banshee etc) ares all running smoothly. And when the direcotry windowe does open, within 10 sconds it will turn grey and prompt me to force quit. When i try to open nautilus from a terminal, it comes back with the message
Code:
(nautilus:3508): Unique-DBus-WARNING **: Error while sending message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
I have connected xp and fedora through crossover cable . xp has ip address 192.168.0.1/24 (manually assigned) fedora has 192.168.0.2/24 with default route equal to 192.168.0.1
I can ping fedora from xp computer but i can't able to ping xp from fedora computer.
I have manully edit the /etc/sysconfig/network-scripts/ifcfg-eth0 file with correct subnet mask and ip address because when i tried to give ip address manully in network manager the subnetmask is replaced with gateway address don't know why.
Now i want to share internet through crossover cable . xp is connected to internet through wireless usb adapeter.
I am running Debian Squeeze with XFCE. I have installed gdebi, but when I try to run it as gdebi-gtk it gets to the point of password entry, lets me do this then closes before installing the package. It worked fine for the first few, and it works as gdebi from the command line, so I can only guess that it is linked to something with gtk graphical front end. I tried removing using apt-get remove and reinstalling as well as purging the cache and checking for broken dependencies.
This is the output when I run gdebi-gtk from terminal
(gdebi-gtk:3582): GVFS-RemoteVolumeMonitor-WARNING **:
cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply:
Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Traceback (most recent call last):
File "/usr/lib/python2.6/dist-packages/GDebi/GDebi.py", line 475, in on_button_install_clicked
self.dialog_deb_install)
File "/usr/lib/python2.6/dist-packages/GDebi/GDebi.py", line 736, in __init__
super(FetchProgressAdapter, self).__init__()
NameError: global name 'FetchProgressAdapter' is not defined
I've just found that one of my email addresses with an auto-reply gets stuck in a loop when it receives email from senders who also have an auto-reply set up.Is there an easy way for me to set Postfix so that it only sends one auto-reply email or so that it only sends a maximum of 1 auto-reply message per day to the sender?
View 1 Replies View Relatedi have a mail server that uses Postfix as a mail server, it runs ok, but i need to add some features to a specific users only.what i need to add is Auto-reply message for some users only.
View 5 Replies View RelatedI Installed Cinelerra on my 13.37 64 machine , compiled OK with all dependencies Here is the deal breaker its totally dodgy crashes on any file and is just basically unusable
Or someone give me a working slackbuild that's less flacky Now is this normal for Cinelerra or is this Slackware related or is the build just old Tried to contact the slackbuild maintainer but have yet to receive a reply
I recently updated my iPod touch to the 4.2.1 firmware. So I get the usual
DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) Error. Yes I've tried the old "sudo apt-get update;sudo apt-get dist-upgrade"
but that was to no avail. way to fix this? Now click 'back'.