General :: Cp Reply Option Is Deprecated Try Using I Or F Instead
Jan 5, 2010
my command is the following:cp -LRuvp --reply=yes /mnt/filename /mnt/usbdrive/filename 2>/mnt/usbdrive/ error.log.i get "the reply option is deprecated try using i or f instead" the problem with the above is the only thing i get in my error log is: "the reply option is deprecated try using i or f instead" and if i use "i , f , /cp , etc..." nothing is generated in my log..what i want to do is copy file from source with "LRuvp" to destination and appened out put to "error.log"
View 14 Replies
ADVERTISEMENT
Jan 6, 2010
I'm using Conky in my Ubuntu 9.10 Karmic. I have an error message like this:
Quote:
Conky: border_margin is deprecated, please use window.border_inner_margin instead
Conky: one or more $endif's are missing
Conky: desktop window (1a00065) is subwindow of root window (10d)
Conky: window type - override
code....
View 3 Replies
View Related
May 11, 2009
I am new in linux,I installed apache-tomcat on fedora.I can view all web pages on localhost:8080 but when I try to view them by server's url address from another computer, I don't get respond.Can it be a firewall problem or something else?
View 4 Replies
View Related
Jun 17, 2011
I've just found that one of my email addresses with an auto-reply gets stuck in a loop when it receives email from senders who also have an auto-reply set up.Is there an easy way for me to set Postfix so that it only sends one auto-reply email or so that it only sends a maximum of 1 auto-reply message per day to the sender?
View 1 Replies
View Related
Jun 27, 2010
Sam and I are going to the fair on sunday around 2 if anyone wants to join us. Lets get some deep fried butter.As you can see the first message is cut off in the last message, it just says Sam... no plus sign or anything for me to be able to view the whole message including everything that was said throughout multiple emails. This happens to every single one of my emails, if someone replied again to this the original message just would no longer be on the email at all and I'd have to search it out in previous emails which is a pain.
View 2 Replies
View Related
Jan 24, 2010
I have configured mail server using Centos. I have also used procmail and used squirrel mail as webmail browser. I want to provide auto reply facility to my users? What should I do?
View 5 Replies
View Related
Jul 24, 2009
This problem one day popped out of nowhere in my ubuntu 9.04 firefox browser that I could not submit my reply on any forums. So I changed my browser to epiphany and then to opera but all failed then I installed arora and it worked. I don't know what is the problem with other browsers I just cannot submit a reply on any forums.
View 8 Replies
View Related
May 10, 2010
Worked around the problems with OpenJDK causing slowness/crashes/CPU-hogging on my system by installing Sun JDK.
Why is Sun's Java deprecated? OpenJDK's buggier than an ant farm in my experience, and every time a Java applet starts in my browser, CPU immediately goes to 100%, and doesn't stop, even when I close the tab that the applet was running in. Only way to stop the CPU from getting hogged is to kill Firefox and restart it.
That or switch to Sun Java instead of OpenJDK.
View 1 Replies
View Related
Aug 27, 2011
I find network-manager inconsistent most of the times and hence use the /etc/init.d/networking script to bring the interfaces up. But for sometime now I have been getting these sort of messages :- $ sudo /etc/init.d/networking restart Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces ... (warning). Reconfiguring network interfaces...done. If its being deprecated, then who or what is going to be taking over those functions?
View 3 Replies
View Related
Jan 5, 2010
I see these boot.log warning and understand that the directory where these config files are kept has (or is) changing. Okay, but is the correct procedure to just move them over from the /etc/modprobe.conf dir to the /etc/modprobe.d file? I am wondering if some changes to those config files or those that they are related to must be also made? A portion of the boot.log is below.
[Code]....
View 14 Replies
View Related
Mar 1, 2010
i got this warning message while booting
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
View 4 Replies
View Related
Mar 5, 2011
Having not used Clive in over a year I went over to [URL]... and downloaded, built, and installed both Clive and URLgrabber. Here is error message when I tried to run Clive,
[code]...
View 10 Replies
View Related
Jul 13, 2011
I am currently having issues with system freeze when unmounting portable hard drives. This happens almost every single time. Normal USB sticks are fine and do not produce the freeze. I am using kernel 3.0.0-rc6, however the issue also persists when switching back to 2.6.39. This is the error message i get when freeze occurs, reverting to terminal output:
WARNING! power/level is deprecated use power/control instead
Jul 13 18:26:49 destiny kernel: [ 6196.892776] Call Trace:
Jul 13 18:26:49 destiny kernel: [ 6196.892803] [<ffffffffa008feec>] ? scsi_setup_blk_pc_cmnd+0x15/0x104 [scsi_mod]
[Code]...
View 2 Replies
View Related
Aug 18, 2010
I have been trying to install this nice looking piece of software for the last 3/4 days, my lastest error is..
Code:
** Message: pygobject_register_sinkfunc is deprecated (GtkWindow)
** Message: pygobject_register_sinkfunc is deprecated (GtkInvisible)
** Message: pygobject_register_sinkfunc is deprecated (GtkObject)
INFO : Loading Exaile 0.3.2.0...
INFO : Loading settings...
** Message: pygobject_register_sinkfunc is deprecated (GstObject)
Traceback (most recent call last): .....
I have installed:
pygtk-2.16.0
pygobject-2.21.5
gst-python-0.10.19
dbus-python-0.83.0
pycairo-1.2.2
gobject-introspection-0.9.3
libffi-3.0.9
View 8 Replies
View Related
Jul 3, 2010
I've just updated my linux system (Debian) and went to compile some code I'm working on. However it causes some problems, presumable because of GCC up dates. I get many of my subject line errors for example
../../common/Version_Control.cpp: In function int VersionControl():
../../common/Version_Control.cpp:55: warning: deprecated conversion from string constant to char*
So I check up the error and it comes from my error handler code which is a function
extern void SetError(char *string,int error_number)
The net tells me all I need to do is convert char *string to const char *string, however when I do so and recompile I get the following error
Error_Control.cpp: In function �void SetError(const char*, int)�:
Error_Control.cpp:41: error: invalid conversion from �const char*� to �char*�
make: *** [Error_Control.o] Error 1
I think I've done exactly what's recommended ?
View 3 Replies
View Related
Jan 10, 2011
My problem is that the warning keeps apperaing when I run g++ compilation.
Say, I have a system runtime function with header (imaginary)sysruntime.h: void printfunction(char *line);
Then in my .cpp file, I will include the above header #include <sysruntime.h>
Then, I do the below:
Line12: char *linetoprint = "Print this line";
Line13: printfunction(linetoprint);
But, I will get the warning message "Line12: deprecated conversion from string constant to 'char*'". (Even though it compiles)
My question is how should I declare my char* so that I wont get this warning message, and can still run printfunction(char* line) correctly?
View 7 Replies
View Related
Nov 25, 2009
I'm using them to make a simple firewall on the girlfriends computer that is directly connected to the Internet. I wish to block everything except for a SSH port for me to admin with, and normal use things like a web browser. I grabbed an old template for the config and modified as needed. I'm getting an error that I'm not sure what is causing it. it is saying all incoming packets on any device is accepted. Or since there are explicit rules for eth0, that lines just means for any other device, which in her case there are none, so ends up meaning nothing?
[code]...
View 2 Replies
View Related
May 16, 2011
I am trying, using checkinstall to make eboard to enable use of this program with a DGT electronic chessboard (option not available in the program included in the repositories) according to the instructions given here. After the preliminaries, namely downloading and extracting the source from: [URL]-1.1.1.tar.bz2./configure runs fine but (after su-ing to root), both make install & checkinstall fail after numerous warnings about "deprecated conversion" like:
Code:
board.cc:55: warning: deprecated conversion from string constant to 'char*'
board.cc:157: warning: deprecated conversion from string constant to 'char*'
board.cc: In function 'gboolean board_expose_event(GtkWidget*, GdkEventExpose*, void*)':
board.cc:1414: warning: deprecated conversion from string constant to 'char*'
bugpane.cc:304: warning: deprecated conversion from string constant to 'char*'
View 4 Replies
View Related
Mar 18, 2010
I have install ubuntu 9.04 on my machine. When I am trying to ping google.com, I do not get ping reply but I am able to browse Internet. Also, I am able to ping any of the local machine on LAN.
View 9 Replies
View Related
Jan 17, 2011
First of all I'd like to let you know that I'm not very experienced with Linux,and I am using Ubuntu 10.04.1 LTSI'm also not really sure if this is the proper section in which I should post.I'm running a Minecraft server,and I'm trying to make a PHP script grab the reply from a screen.Is there any way to do this?Is there any way to grab the names "name1", "name2" and "name3"?The amount of names can go up to 35 on my server
View 2 Replies
View Related
May 16, 2011
I posted a topic in another section and tried to reply. The message pane opens and the cursor is there, but when I start typing the cursor stays put and nothing shows up.What to do? I am doing this reply from Windows right now.
View 3 Replies
View Related
Dec 2, 2010
anyone can explain me why whois sometime does not reply for some ip only ?
View 4 Replies
View Related
Mar 10, 2010
I've noticed that after the initial startup and updates, if I shut down ubuntu I cannot get back on. The loader just gets stuck at the "Logo screen".When run in recovery mode I recieve the following errors (a few in duplicate):"mount all main process (556) terminated with status 2"."mount all-shell (559) terminated with status 2"."could not get password database information for UID of current process: user '???' unknown or no memory to allocate password entry".After this I'm left without even a command line and nothing I type does anything.I've never had problems with ubuntu in the past after using it for about 6 months but this is the first time I've tried running it alongside windows 7, could that be the cause?
View 6 Replies
View Related
Aug 11, 2010
I am running Debian Squeeze with XFCE. I have installed gdebi, but when I try to run it as gdebi-gtk it gets to the point of password entry, lets me do this then closes before installing the package. It worked fine for the first few, and it works as gdebi from the command line, so I can only guess that it is linked to something with gtk graphical front end. I tried removing using apt-get remove and reinstalling as well as purging the cache and checking for broken dependencies.
This is the output when I run gdebi-gtk from terminal
(gdebi-gtk:3582): GVFS-RemoteVolumeMonitor-WARNING **:
cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply:
Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Traceback (most recent call last):
File "/usr/lib/python2.6/dist-packages/GDebi/GDebi.py", line 475, in on_button_install_clicked
self.dialog_deb_install)
File "/usr/lib/python2.6/dist-packages/GDebi/GDebi.py", line 736, in __init__
super(FetchProgressAdapter, self).__init__()
NameError: global name 'FetchProgressAdapter' is not defined
View 1 Replies
View Related
Sep 15, 2010
Very recently I started using Evolution as my mail client. Before that I was using MS Outlook. Everything seems to be OK with Evolution but I find 2 startling limitations.
1. How to set up out of office auto reply
2. What is the equivalent of mail archive.
I tried to google it and looks like many people have the same issue but no proper solution. Is this really a limitation with Evolution?
View 2 Replies
View Related
May 6, 2010
i have a mail server that uses Postfix as a mail server, it runs ok, but i need to add some features to a specific users only.what i need to add is Auto-reply message for some users only.
View 5 Replies
View Related
May 17, 2011
I Installed Cinelerra on my 13.37 64 machine , compiled OK with all dependencies Here is the deal breaker its totally dodgy crashes on any file and is just basically unusable
Or someone give me a working slackbuild that's less flacky Now is this normal for Cinelerra or is this Slackware related or is the build just old Tried to contact the slackbuild maintainer but have yet to receive a reply
View 3 Replies
View Related
Jul 31, 2009
I was using my ISP's DNS server. When I would ping something that doesn't exist, e.g. blahtest.com, it would reply anyway. When I tried to go to the site in a browser, it was some page like "I hope we can help you find what you're looking for". I thought that was ridiculous, so I changed to OpenDNS's DNS server.
View 4 Replies
View Related
Apr 8, 2010
If I type
Code:
$ ping [URL]
or even
Code:
$ ping google.com
should I receive a reply?
View 9 Replies
View Related
May 2, 2010
I have configured DNS on ubuntu server 8.10 and it is working fine. There is one question I have though. Everytime I ping a LAN device by name I get the reply from the server with only the IP Address.
View 2 Replies
View Related