Ubuntu :: 10.10 Freezes Randomly - Keyboard And Mouse Stop Responding
Feb 4, 2011
I have installed Ubuntu 10.10 on other machines before and have not experienced this problem. Occasionally, the system will lock up. They keyboard and mouse stop responding (my keyboard status lights no longer respond, but my optical mouse light is still on). I can ssh to the machine, and it seems to work as normal. I kill processes that are open on my desktop through ssh, (i.e., Firefox), and I notice when I switch back, I still have the same frozen image on my screen. I have looked at the following files to determine any issues with the GPU:
[Code]...
View 2 Replies
ADVERTISEMENT
Jul 30, 2011
Hey folks. I'm not sure how to describe this properly but periodically Kubuntu 11.04 will stop responding to my mouse and keyboard EXCEPT that Plasma, or what I assume is Plasma, still responds to mouse events. I can launch and exit the desktop cube and desktop grid but can't access my panels or any application controls. The only fix I've found is to do a hard power cycle.
Does this behavior ring any bells for anyone? This is the last hurdle I've got between me and using Kubuntu 11.04 full time on my Samsung RV515.
View 2 Replies
View Related
Jul 15, 2011
My ubuntu session will freeze and stop working. For example, the mouse and the keyboard will stop responding and the screen sometimes get divided into 4 smaller quadrants of the current screen.The only thing I can do after it freezes is reboot the machine.Would anyone know what is causing this?Also, I keep having to move my optical mouse from the usb slot into a ps/2 slot.And the same thing with my keyboard. I have 2 keyboards, so I can plug in the old ps/2 keyboard instead of the new usb keyboard. (the devices keep flipping)My machine is an AMD 3400 with an Epox mobo. Nothing like this has ever happened before, and I have been using ubuntu for more than 4 years without any problems.
View 9 Replies
View Related
Jan 23, 2011
Today my keyboard and or mouse repeatedly stop responding some minutes after boot. Currently the mouse stops responding after a few seconds of movement immediately after boot. Yesterday I used the machine most of the day, yet this issue didn't arise. Today I used it for a few hours before the issue developed. I did a full system update from the fresh install yesterday night. It's therefore possible that this issue has arisen as a result of the update, and that today the onset was delayed for some reason.
Earlier today I had the same problem with the keyboard. I replaced the batteries thinking that this was the cause. Now it looks like both keyboard and mouse are affected by the same problem. When the mouse stops functioning and the keyboard remains active, I unplug the mouse and replug it in, but it still does not respond, and only the unplug, and not the replug, are detected and logged in dmesg. I noticed ever since I installed Fedora yesterday that plugging in new usb devices after boot did not result in them being recognised, and that if I unplugged a mouse or keyboard and plugged them in again they would not work (requiring a hard reset). Currently the machine isn't usable as I cannot use the mouse for more than a few seconds. I haven't tried a PS2 connection, and currently I have keyboard access.
Hardware:
Fujitsu LZ945230BH1 USB Mouse
Microsoft Arc Bluetooth Wireless USB Keyboard
Running Fedora 14.
I haven't tried PS2. My keyboard and mouse appear to be working again (25 mins and still responsive).I unplugged all USB devices except for the keyboard, mouse, and wifi dongle. This appears to have solved the problem. Other devices that were plugged in were a USB to SATA external HDD caddy (powered off), and a serial USB connection to a Sheeva Plug computer (mini server). how I can use all my USB ports in future without this issue arising?
View 1 Replies
View Related
Jun 17, 2010
I'm running Fedora 12 on a Shuttle SN78SH7. Updates are all current from the Fedora repositories. I'm using the Nouveau driver for the Shuttle's on-board Nvidia graphics adapter. At random intervals (1 to 5 times per day), my USB keyboard and the buttons on my USB mouse stop working and the desktop freezes (i.e. GKrellm graphical data stops updating, partially painted windows don't complete). However, I can still move the mouse pointer around the desktop. This only seems to happen when I am actually using the computer from the console. It has never happened while the system was turned on, but not being used.
When the mouse and keyboard stop working, I can log in from another computer via ssh. Once the computer gets in this state, the only way to fix things is either to reboot remotely using ssh or to cycle power. I've run low level hardware diagnostics - everything checks out OK. This computer only has USB and firewire inputs. No PS2 jacks.
View 1 Replies
View Related
Feb 21, 2015
I am using Debian with a gnome desktop.
Code: Select alluname -a
returns
Code: Select allLinux app-server 3.2.0-4-amd64 #1 SMP Debian 3.2.65-1+deb7u1 x86_64 GNU/Linux
My desktop sometimes freezes and does not respond to keyboard or mouse. I initially thought the CPU was overheating but it froze tonight when my CPU temperature was 32C and it has been up to 50C without freezing. I am beginning to think it is a software issue rather than a hardware issue but do not know. I looked at the pm-powersave.log and user.log but did not see anything suspicious.
View 14 Replies
View Related
Mar 19, 2011
programs (especially Firefox, though I haven't used other programs much) stop responding rather frequently without warning and after some time they just start responding again. Apt-get also takes ages to unpack stuff when I'm upgrading/installing something, that might be related. According to top there is barely any cpu usage at all during these freezes. I had this issue on a stock Lucid install. When Maverick came out, I tried that one, and the issue still existed. On a fully upgraded Maverick system, it's still there as well. Windows works without a hitch, as does Ubuntu running under a VM on windows.
System specs:
CPU: Phenom 2 x4 945 @ 3 GHz
GPU: Radeon HD 5770 with fglrx
4 GB of ddr3 ram
Motherboard: Asus M4A89GTD PRO
Hard drives: 2 WD 1.5 TB drives running on a fakeraid 1 array
View 2 Replies
View Related
Jun 1, 2010
I upgraded to 13.1 from 13.0 a few days ago. I have a Toshiba Satellite L3655D that I leave on constantly. Twice now, I have woken up to windows (urxvt and firefox) that don't accept keyboard input. I can paste into them and they respond, clicking is fine, but the keyboard either barely sends or is completely ignored - if I tap a bunch of keys, one or two might go through, eventually. New windows work fine, so I have to replace everything I have open.
edit:I switched to XFCE for 2 days and the issue didn't appear, but my other laptop with the same fluxbox settings also did not have any problems. I switched the original laptop back to fluxbox (and happened to upgrade the ATI drivers around the same time) and haven't had it happen since. If this happens to you, try restarting X.
View 7 Replies
View Related
Jan 17, 2011
Kubuntu 10.04 all updates until today.
All of the sudden my keyboard and mouse are not working any more. At login window keyboard is working OK so I can login (mouse is not working), but after login, keyboard is not responding unless I press the key for few moments (perhaps a second) until a keyrepeat begins. Only then key is accepted and echoed on screen.
Funny thing is, if I login as some other user, everything works as expected.
I have already ran Xorg -configure as su, but it didn't resolve the problem.
View 8 Replies
View Related
May 10, 2010
I just upgraded from 9.10 to 10,4 via update manager and now when I switch on, the boot process seems to work but when I arrived to the login page, I can't use mouse or keyboard. The system is not freezed because I can see the watch on the lower right running properly.
View 3 Replies
View Related
Nov 3, 2010
It bounces on and off. No pattern, but mostly off. I have ran it off a live cd and off the hard drive, multiple live cd's and versions of ubuntu. Even a usb mouse does the same thing
View 2 Replies
View Related
Nov 12, 2009
I just installed the new OpenSuSE 11.2 release and after coming up in graphical mode the keyboard and mouse are not responding at all.
After that via a remote login force the machine back to runlevel 3 and this makes it able to login to the console and trying to start sax2 to make a new X configuration.
Well it doesn't read the old configuration but gets stuck as well.
The install was an update from OpenSuSE 11.1.
View 9 Replies
View Related
Feb 5, 2010
On our SuSe 11.1 PC keyboard and mouse are no more responding although it did work properly until yesterday. We shut down the computer yesterday evening and today they do not work anymore. But it is not a hardware problem, we can use keyboard and mouse until Grub bootloader, but as soon as we start a Linux session (doesn't matter if normal or failsave mode) the keyboard and mouse are disabled, we can see that because the NumLock and CapsLock LEDs are switched off immediately.
We have no idea what happened. We booted from CD into rescue mode and mounted the hard disk manually and checked some logfiles, but the boot.log tells us that USB keyboard and mouse are detected, as well as the Xorg.0.log file. And we found no indication that keyboard or mouse are disabled or something like that.
View 1 Replies
View Related
May 2, 2011
Is anyone else having issues with their mouse/keyboard responsiveness via Synergy after upgrading to 11.04?
If I plug mouse and keyboard directly into the desktop the issue goes away. But when I connect via QuickSynergy and share my mouse/keyboard the mouse is very slow and has low sensitivity.
View 4 Replies
View Related
Apr 14, 2011
I've just installed Debian Testing XFCE, and mouse & keyboard don't respond to any inputs. The keyboard works just fine in the Recovery Shell, that's why I suspect a problem with the XServer.
View 9 Replies
View Related
Mar 7, 2010
I recently installed suse 11.2 on my system and during the install the keyboard (Microsoft internet keyboard PS/2) and mouse (Microsoft optical mouse USB with scroll wheel) worked perfectly, but once I reached the login screen they both became unusable.
I also tried rebooting into failsafe mode but once reaching the login screen the same happened again, the only key that seems to work is the 'F Lock' key and the optical light appears on the mouse.
View 1 Replies
View Related
Apr 5, 2011
I've been an Ubuntu user for a couple of years. I have a Sony Vaio VPCCW-2S1E laptop, with an Nvidia GT330M graphics card. I had worked with Karmic, Lucid and Maverick on this laptop without any problems, until recently, when I had to re-install Maverick.
Now my laptop keeps freezing entirely (no response whatsoever), with two keyboard lights blinking. This happens randomly: sometimes I'm doing something, other times the laptop's completely idle. Sometimes the screen display turns off on freezing, other times not.
View 1 Replies
View Related
Jul 26, 2011
My trusty 11.04 x64 Ubuntu desktop machine stopped booting up properly about 2 weeks ago - it goes through Grub and into Plymouth, but then freezes and stops responding to keyboard input either on a dark purple screen, or less often the same but with the Ubuntu logo and the 5 boot progress circles but with none of them lit up. I can hit escape early on after grub and see initialisation reports showing everything successful (other than a fail on "Automatic crash report generation") - up to a line saying "Stopping System V runlevel compatibility [OK]", at which point it freezes.
Going into recovery mode allows me to fsck the disk (which is fine, and smartctl reports all attributes as fine), fix packages (which I have done a number of times, to no avail) and boot into safe graphical mode, which works fine, albeit only on one monitor and with very poor graphics performance, obviously. As the machine was borked and everything was backed up on my fileserver anyway, I decided to nuke it and give Fedora a go (I've been using Ubuntu since Feisty and it was a good time to try something else). Fedora was fine (and worked with the default nouveau driver), but I didn't like it, so after less than 24 hours away from the fold I decided to come back to Ubuntu.
At least a reinstall should fix the problem with booting, right? Wrong! The live CD worked fine, installed perfectly, and the machine behaved itself upon first reboot - at which point I ran apt-get dist-upgrade, restarted, and blam - right back where I started. Updated vanilla Ubuntu 11.04 will not boot. Has Ubuntu released a dodgy package that has broken my x server? I don't want to have to go back to 10.10 -
[Code]...
View 2 Replies
View Related
Nov 7, 2010
I had been happily on Jaunty Jackalope until they stopped supporting it so I took the forced upgrade and it's HORRIBLE!
I feel like I'm back in Windows land. Within an hour of my first load I had my very first Ubuntu total-lockup. Just like Windows. In the 18 months I'd been using Jackalope I had not had a single crash. Not one.
It's slow, jerky, and has odd freezes. Just like Windows. Applications randomly stop working and die. Just like Windows.
Is there any way to fall back to Jackalope or is there any hope of them fixing Koala? 'Cause this is wretched.
I see there's another version out there...10.04.01.LTS. I'll try that. It can't be much worse.
View 9 Replies
View Related
Feb 12, 2010
i'm using ubuntu since 8.04, and the current (9.10) is a fresh install on new hdd.the problem was the same each version (8.04, 8.10, 9.04, 9.10) - while i'm playing the video (no matter if i use mplayer [smplayer], gstreamer [totem] or adobe flash plugin [videos]) the playback freezes randomly for about 5-10 sec. during the freeze the movie is still played, i can hear the sound is ok. if i press [space] in smplayer it pauses the playback, so the responses for keyboard actions are ok. not for the mouse clicks however. i can still move the cursor around the screen but it seems the system is not aware of it (clicking on the "pause" button doesnt pause the movie). except the cursor, nothing changes on the screen (if the im [pidgin] window was blinking because of new message, it freezes etc etc).
is there any kind of log i could look into just to try figuring out the problem?it is impossible to watch any movie on my pc (currently i don't have tv)i installed windows on external hdd once and it played videos fine so i suppose it's not hardware problem .
View 3 Replies
View Related
May 12, 2010
I just upgraded from 9.10 to 10.04 using the distro upgrade feature. Everything was upgraded without errors.
However, my mouse/keyboard now freezes after 10+ minutes of use. Both are unresponsive, and the keyboard lights does not change with the use of caps-lock, etc.
The system didn't crash though. I had a download running which was completed despite the mouse/keyboard hang.
The computer is barely usable now, I really wished I didn't upgrade...
View 2 Replies
View Related
Nov 11, 2010
I've had these problems ever since upgrading to 10.10Boot up goes nowhere unless I touch the trackpad or keyboard. My clock says it's 10:00am but it's three in the afternoon, so I'm always having to resync with NTP. Music and video stutters with playback unless I touch the trackpad.I'm on a Toshiba NB205 netbook.These are pretty big problems. And I'm sure I'm not the only one using 10.10. Is there no fix out for this yet?
View 2 Replies
View Related
Jun 7, 2010
I was having a problem with the mouse and keyboard randomly failing to work after upgrading to version 10.04. I tried both the 32 and 64 bit versions. The problem went away after I edited the file /etc/default/grub and changed the following line:
from
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
to
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash noapic nolapic"
If you are unable to open a terminal window, try doing the following
Ctrl+Alt+F1
Log into you account.
sudo nano /etc/default/grub
After saving your changes and exiting nano you can reboot by using the halt command.(FYI Ctrl+Alt+F7 gets you back into X server -- but you need to reboot for the change to take effect) Update: problem recurred. I had to do Ctrl+Alt+F1 to log into a console. I executed 'ps aux | more' to find the PID for X.Using the PID I restart X with 'sudo kill -S SIGTERM <PID>'.Once it started up again it was fine.
View 1 Replies
View Related
Jan 11, 2010
System was running fine under 8.04 but decided to update. The live CD works fine but after install, the Mouse and Keyboard stop working under 9.10. Even the keyboard power button is off. Disconnecting and reconnecting the keyboard or the mouse does not . AMD Athlon 64 X2 3800+ PS/2 Keyboard and PS/2 mouse
Everything else seems OK but how would I know without the keyboard or mouse. The keyboard turns off right before the first Ubuntu screen. The Numlock will go off and then nothing. Tried to run dpkg - fix broken packages after booting to repair. All I get is fail to fetch http: (whatever )Could not resolve us.archive.ubuntu.com. Update: Alt-F3 ... then Booting to terminal mode does not disable the keyboard.
View 9 Replies
View Related
Nov 3, 2010
Keyboard and sometimes mouse stops functioning whilst using oowriter - it only happens with writer. I lose control for up to 30 secs and then it comes back - but it keeps happening. This is on a 10.10 machine with standard install. I have changed keyboard from wireless to wired and back to wireless with new batteries. I have uninstalled Office, rebooted and re-installed but it is still happening on native odt docs. Is this a common recent issue?
View 1 Replies
View Related
Mar 15, 2011
whenever I try to hibernate/sleep my computer and I come out of the sleep, the keyboard is not recognized and stops working altogether and requires a reboot. Changing the USB port does nothing either.
View 5 Replies
View Related
Aug 27, 2011
I just install CentOS 5.6 on my computer. My mouse and keyboard stops working in 2 cases: 1. copy files from usb (FAT and NTFS); 2. update my system (specifically, when downloading update packages). But the system's still working. It seems weird but I can do nothing but reboot every time.
View 3 Replies
View Related
Jul 29, 2010
Ubuntu 10.04 64 bit, GNOME desktop. Previous install (same OS) gave an error when switching users. Did a fresh install, and now the keyboard and mouse freeze. This happens almost every session. I have to force shutdown. Sometimes it happens in 5 minutes, other times it happens in 4 hours. I don't want to sound like a jerk, but the Ubuntu problems are starting to get to me. I really want to use this. I like it, but I'm getting frustrated. 9.10 had wireless problems, and now I'm getting this freezing thing. Both the keyboard and mouse are USB connections. Everything else works when the freeze occurs, i.e., video's still play, web browser is still displaying gifs, etc. Only the mouse and keyboard freeze. All other operations seem normal.
View 3 Replies
View Related
Aug 18, 2010
I have been battling this issues for about a year now. Kind of got tired of dealing with it, but inevitably I go away for vacation or something and I lose power at the fort then the system will not come back up on its own.
Every time (100%) I power my system on with the single USB cable connected to it, my system hangs. It did it on 8.x, 9.x and all versions of 10.x. I have asked the questions before, but never get anywhere with it. Finally I have found this Forum and figured out how to ask questions Weird, I know
Anyway.
The system goes through the BIOS check and gets to the GRUB loader. If I do nothing, it hangs with a black screen just after it says that it is loading the kernel.
If I change the kernel commands to include the noacpi=apic or most other common fixes for what I have been told, USB, I get to the same place seemingly.
In reading through the forums and a little testing, I find that if I remove the splash and the quiet commands (obviously snicker), I am able to see where it is really stopping, but does not make sense to me.
The last informational text that appears to be processed is one of
Registered Protocol Family 1
There is nothing in the SYSLOG, MESSAGES or DMESG at all for this boot. I would assume that the system is not to a point where we can log this data
This is an AMD Phenom II x4 running 10.04 64bit Ubuntu. The USB connected device is an Avocent KVM 4 port with Audio and USB.
View 1 Replies
View Related
Aug 28, 2009
I randomly started up my laptop one day and the mouse and keyboard stopped responding once GDM's login screen came up. Everything works fine from the console, but even if I run startx from the login shell the mouse and keyboard do not work, even though everything else in GNOME runs perfectly.
I am using an HP dv6426us laptop running Ubuntu 9.04 (i686 architecture with the 2.6.28-15-generic kernel). Below is a copy of my xorg.conf file, just in case there might be something wrong with that. I will try and put more information on, but seeing as I have to use a different computer to post this thread, copying over log files and stuff is difficult for the moment (though I am going to try and copy them over to a flash drive).
Code:
Section "Monitor"
Identifier "Configured Monitor"
Endsection
[code]....
View 2 Replies
View Related
