General :: Hp 3050 Wireless Printer Don't Print From Puppy 5.1
Jul 24, 2011
I got a hp 3050J610 wireless all in one and hooked it up to my wireless network
and it works fine from windows vista from my hp notebook. I also run puppy 5.1
off a pen drive which runs fine on the laptop. Puppy sees my network fine and
goes on the internet from my satalite modem over the wireless network no problems.
I installed the wireless printer to puppy with the cups wizard without any errors or problems. Cups found the printer and correct ip address no problem. I used the 610c driver from the cups menu which I assume is the right one. I can't seem to find another one. It lists the printer and lists the right ip address. when I try to print it shows it is printing the print job but nothing happens at the printer. I look in the print manager and it shows the print job was done. I can ping the ip address and get a responce.
View 3 Replies
ADVERTISEMENT
May 6, 2011
I love Puppy linux, but installing the printer has defeated me. Could some kind soul step me through the install process.
View 2 Replies
View Related
Jun 20, 2010
I'm using Ubuntu 10.04 on a laptop in a wireless system at home. It's all working fine. I can browse the internet without any difficulties. The problem is that I cannot print to my HP Laserjet 1022nw. The IP for the printer is 192.168.2.2 and I can reach it (and print) from my windows machine. But, if I use the laptop it cannot reach the server at 192.168.2.2 and all print jobs freeze. It's odd because I used the Ubuntu network printer install AppSocket/HP JetDirect connection and it found the printer at socket://192.168.2.2:9100 and installed the correct Foomatic driver. But now the browser cannot get to 192.168.2.2 and it wont print. What am I missing?
View 5 Replies
View Related
Dec 14, 2010
Trying to print from my laptop to friends wireless printer. I see his printer "7600 Series" in Network - File Browser. How do I print to his printer. I have text document. I click on "Print", but only "Print to file comes up".
I did System -> Printing -> Help -> Troubleshoot
Got: CUPS Service Stopped
The CUPS printer spooler does not appear to be running. To correct this choose
system -> Administration -> Services
There is not "Services there"
What to do? Ubuntu 10.04 LTS
View 9 Replies
View Related
Mar 2, 2010
I'm fairly new to linux, I can't get puppy to connect to ANY wireless network, protected or not. The driver autodetected my wireless card (IBM high rate wireless LAN with modem II) as an Intersil Prism 2.5 chipset, but it will not work. I wonder if the driver is corrupted, or if I should just use ndiswrapper with the windows drivers. Obviously, I would prefer to use native linux drivers, but the wrapper will not tax the system too much if I use that option. I have heard that these laptops are very linux friendly, and I ran xubuntu on it for quite some time with no big problems. My home router is a Belkin F6D4230-4 V3. This thing will not show up at all, but my family's old linksys will, I can't connect to it either.
View 7 Replies
View Related
Dec 26, 2010
My wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?
View 5 Replies
View Related
Jan 21, 2011
I have recently downloaded live cd of Puppy Linux and boot successfully from it. But, I could not connect my BSNL EV-DO datacard as no wireless network connection is detected by Puppy. What should I do? How can I configure my BSNL EVDO Datacard over Pupply Linux? Plz.
View 1 Replies
View Related
Oct 27, 2010
I've tried to copy different tutorials so that I can put on paper everything prints except the important things(commands & script examples. Is this some kind of copy-right? If not issue with copy-right is it possible to have complete copy. Also I haven't seen in PDF form, I just need to copy so I can reference without having to be on computer.
View 4 Replies
View Related
May 1, 2010
Can CUPS print to a color printer? And also do I need a GUI running on my computer in order for CUPS to work?
View 1 Replies
View Related
Feb 15, 2010
I'm trying to get GS to print to network Windows printer, but somehow fail to do so . I managed to print through CUPS to that printer but if I use GS with -sDEVICE=cups nothing happens, nothing is printed, CUPS logs remain unchanged... I also found command using smbclient (gs ... | smbclient //machine/printer -U user ... -c 'printmode graphics;print-') but that one fails with "session setup failed: NT_STATUS_REQUEST_NOT_ACCEPTED" Here is why I need it, so maybe you know better way: We need to print thousands of PDF files in one print job (to prevent anybody else to send something else in while we are printing this). I was trying to develop small C program using GS API to achieve this but somehow I fail on something as trivial as print something on shared network printer.
View 3 Replies
View Related
Dec 20, 2010
Failed to print to HP printer from Ubuntu 10.10.. i get error - {'printer-state-message': u'/usr/lib/cups/filter/foomatic-rip failed', 'printer-state-reasons': [u'none']}
View 1 Replies
View Related
Feb 5, 2010
I have an old desktop that I'm trying to set up as a home backup/print server. Backup was trivial, but am having issues getting the printing to work. The printer is connected to the server running Ubuntu Server 9.10 (no gui). If I access the printer via http://hostname:631/printers/, I am able to print a test page, so I know the printer is working; however, I am having no luck from Windows. Windows can see the printer when browsed via hostname, but I am unable to connect. Windows says "Windows cannot connect to the printer" without indicating why.
From /etc/samba/smb.conf:
[global]
workgroup = WORKGROUP
dns proxy = no
security = user
[Code]...
View 5 Replies
View Related
Aug 6, 2010
I can't print pdf files from the Ubuntu PDF viweer on my printer - I get a message that 'pdftorasterfailed'. My workaround is to print to file then print the postscript file. Annoying but it works. I did some searching and this is a known bug in cups for Ubuntu 10.04. The first thing I tried was a system update, that did update cups but it still fails. I found this link:
[URL]
and have the patch files, but how do I apply them?
View 8 Replies
View Related
Oct 14, 2010
I have a laptop running Ubuntu 10.04 and my basement computer running Windows 7. I want to be able to access files on on both computers from either. I also want to be able to print from my laptop to the printer attached to the basement computer. I finally got printing working. Then I tackled the filesharing. I finally get filesharing working and now, I can't get printing working again, even though I've gone back to the version of smb.conf that I had when I was able to print. So here is what I've got.
<->testparm
Testparm results.txt
<-> Printer State
When I look at my printer properties in Ubuntu I see the status: Idle - Unable to connect to CIFS host after (tried 3 times) Cups Error Log When I look at the Printer Error Log, I see: (partial) Printer log extract.txt I can ping the IP address of the windows box 192.168.0.5, but when I try to ping the name owner-pc it fails. This would lead me to beleive that the there is a name resolution problem.
View 1 Replies
View Related
Oct 25, 2010
I have a mail-account, which is checked every 10. Minute for new mails (via getmail), printed(via cups/lpr) and the file is deleted if successful.
My problem is that I dont want to print the texthtml, but what it looks like when rendered.
What is the best way of doing this ? html2ps or ?
Is it also possible to print the attachments( PDF) inside the mail, this way ?
View 3 Replies
View Related
Jul 15, 2011
Our one remaining problem seems to be printing. She has an HP OfficeJet 6500 USB printer. We have the computer conntected. Strangely, when I boot from the CD the printer shows up as installed even though I did nothing to install it. After having submitted a print job it shows the printer status as "idle" and the print queue is empty. I tried deleting that printer and re-installing. The installation went as one would expect. However the results are the same. I'm beginning to think that somehow the problem is related to the fact that we are operating from the live CD. getting this thing to print from the live CD.
View 9 Replies
View Related
Jun 5, 2010
i have custom programs written in Basis pro5. Standard output to a pdf virtual printer works fine. Using pdftk to overlay on to a form is hit or miss.... There are products out there like Unform that are just too expensive for my company. i have purchased another product from a company that prints the forms to the laser perfectly but i am incapable of capturing them and saving them as pdf's for archiving/emailing/faxing and i don't much care for this company.
View 2 Replies
View Related
Jun 21, 2009
I am new to Linux and I am trying to install puppy on an old IBM thinkpad 600X (10gb hd, 196mb ram) When installing puppy from a cd, it loads up and does the kernel stuff before "Searching for Puppy files in computer disk drives" - this takes about 10 minutes before saying "pup_421.sfs not found. Dropping out to initial ramdisk console" then it goes to "/bin/sh can't access tty; jon control turned off". then it stays like that and doesn't continue.
View 8 Replies
View Related
Aug 7, 2011
I have a HP Deskjet 3050 printer. In the past (when i used windows) i installed this printer as a networkprinter. However now in Fedora 15 i cant get it to run.
View 2 Replies
View Related
Oct 20, 2009
I want to configure file printer (print to file) on my rhel-5 machine in such a way that if users fire print command from windows xp it should create an individual computer wise txt file on my linux machine. File name should be different for each printer.
View 2 Replies
View Related
May 24, 2010
I am looking for a wireless usb print server that will work with my netbook running ubuntu and my main pc running windows.
View 1 Replies
View Related
Jan 26, 2010
I cannot print pdf files. I click print in evince everything seems ok but nothing comes out on the printer. I receive no error. I have a HP printer (LasterJet 3005n) attached over a network. I am running 9.10 on a Dell Optiplex. I did not have this problem in 9.04. I had this problem immediately after I did a fresh install of 9.10. I can print open office documents without any problem, just not pdfs. I have the same problem with my serval laptop (also running 9.10).
View 8 Replies
View Related
May 18, 2010
I have 2 desktop PC's both running 10.4, both connect to internet thro a wireless router. One PC has a printer attached and I would like to be able to print from the PC without the printer attached, what is the easiest way to achieve this?
View 1 Replies
View Related
Sep 24, 2010
I've tried lpr [FILE] didn't work I've tried cat [FILE] > /dev/lp0 couldn't figure out how to get to the root prompt and I googled until my googler was sore. All I got was lengthy and confusing user manuals for cat. besides going through the trouble of loading GIMP everytime I want to print something?
View 4 Replies
View Related
Nov 9, 2010
I've looked at all the threads that I can find on the HP Deskjet D1660. I am unable to print. I've also tried to manually install the hplip files with no help. The only thing that I can find says to use a driver 3.10.2 but all I can find is 3.10.6 and 3.10.6.15. But non of this is working. XP prints fine but I want Ubuntu to work fine too. This is why I bought this printer in the first place.
I am running Ubuntu 10.10 on an emachine with a celeron micro processor and it has 2 gig memory. I have tried the usb cable in every usb slot available and ever thing else. When I go go print a job the hp panel shows that job is sent to printer and that the printer is printing it. Unfortunately it never get printed. I have tried even removing cups and hplip using synaptic and reinstalling them but no help.
View 6 Replies
View Related
Apr 10, 2011
I have recently bought a printer hp deskjet d1663 but I can not print with ubuntu 10.04. The computer recognition the printer and it say printer ready to print but then it does not print. What can I do?
View 9 Replies
View Related
Aug 11, 2009
my epson printer on my system consists of: ASUS A8N32-SLI DELUXE. THE printer CX8400 using usb port does not print it, only spools out paper with suse 11.1
View 4 Replies
View Related
Jan 20, 2010
I have 2 computers, a linux and winXP , connected in a SAMBA network.
the winXP machine has a printer, and the drivers for that printer does not exist for linux.
so, how can i print to that printer from the linux machine??
samba allows me to do it in some GENERIC way? at leat in TEXT ONLY MODE??
View 3 Replies
View Related
Jun 26, 2009
A few months ago a client had me build a small file server running OpenSuse for them. They also had me install an HP Designjet 650C on the server and share it on the network for 2 desktops to print to. All went well and there have been zero problems. They use a few specialty apps that don't have good enough FOSS counterparts, so I couldn't talk them into switching the desktops to Linux, although they were very interested in it. One of the desktops runs Vista and has an XP Pro VM on it (they are considering a Linux VM to go with it so they can dip their toes in the water). There was a locally installed HP OfficeJet 5610 on the machine, but printing from the XP VM was a hassle because they had to tell virtualbox to pass the usb interface to the VM, effectively disabling it in Vista. Then to print in Vista again they had to release the interface back to the host OS. The other desktop (running XP) was also unable to print to it. They asked me to install the 5610 on the server and share it like I did the 650C.
Installing it on the server was easy. I just plugged it in and checked to make sure everything was neat and tidy in YaST. It printed flawlessly. I configured the share identically to the way I shared the 650C. I browsed the network from Vista, found the printer, and installed it using Vista's native driver. Then I sent a print to it from Vista and nothing happened. Vista is very slow to communicate with the printer compared to the 650C, but it will eventually report that the print job was successful. The printer never receives the print, though. Where are the print jobs going? The VM and other desktop are as big of a problem. XP does not natively support the 5610, so I have to download a driver from HP's site. The driver uses a stupid binary installer that will not allow the driver to be manually installed. Running the installer works, but the driver will not install until it sees the printer in a usb port. That won't work because we are connecting to it over a network path. Where can I find a driver that can be manually installed?
View 8 Replies
View Related
Jan 30, 2009
I am hard time printing to one particular Canon IR8500 printer Red hat.WE are using CUPS to manager around 30 printers.when I try to start the printer from CUPS, it comes back immediately to Printer State: Stopped, accepting jobs..After I delete it and redefine it, the status says Idle, but as soon as I submit a job, the status change to 'Stopped'.
View 4 Replies
View Related
