I have a HP Deskjet 3050 printer. In the past (when i used windows) i installed this printer as a networkprinter. However now in Fedora 15 i cant get it to run.
View 2 RepliesI need to locate the IP of a network printer, as i need to add it to my Ubuntu computer.
Unfortunately the only computer i have access to, with connection to the printer run windows 7. And i have no idea how to obtain some real information from this computer.
I got a hp 3050J610 wireless all in one and hooked it up to my wireless network
and it works fine from windows vista from my hp notebook. I also run puppy 5.1
off a pen drive which runs fine on the laptop. Puppy sees my network fine and
goes on the internet from my satalite modem over the wireless network no problems.
I installed the wireless printer to puppy with the cups wizard without any errors or problems. Cups found the printer and correct ip address no problem. I used the 610c driver from the cups menu which I assume is the right one. I can't seem to find another one. It lists the printer and lists the right ip address. when I try to print it shows it is printing the print job but nothing happens at the printer. I look in the print manager and it shows the print job was done. I can ping the ip address and get a responce.
FC13-i686/KDE
Can't install a HP Deskjet F4140 in FC13.
I have installed;
1. All Cups rpm's
2. Gutenprint-cups
3. All the hplip rpms
4. hpijs
And I still can't get the HP Deskjet F4140 to show up in Selection Window. I have even run HP-Setup and it can't install the F4140 . HP-Setup can see the F4140 is on USB port but can't install it.
I went to the HP website and it says the printer is Supported in the hplip drivers
I have Ubuntu version 10.10 and I'm trying to install the HP DeskJet 1000 J110a printer. I have HPLIP version 3.11 (the latest version I believe). The printer shows up but when I try to print the error message reads: Printer requires the 'foomatic-rip-hplip' program but is not currently installed.
View 2 Replies View RelatedI have recently acquired me a HP all-in-one printer model HP Deskjet F2483. The printer works fine but am having issues getting the scanner to work. Following instructions I found to Google, this is what my shell looks like:
Code:
sh-4.0$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
[Code]...
I have an old, but still usable, HP Deskjet Plus inkjet printer that I have connected to the parallel port of my Fedora 13 box. I can (apparently) configure the printer using the usual print configuration tools, and have selected the recommend foomatic driver (HP DeskJet Plus Foomatic/pcl3 (recommended)) - but when I try to print the test page the job gets queued and nothing else happens. The jobs simply show as pending in the printer queue.
Current uri is parallel:/dev/lp0.
As a side note, my Epson printer on the USB port works fine, but it's using CUPS + Gutenprint v5.2.6 Simplified. Should I be trying something with a different (e.g. CUPS) driver, or a different way of specifying the foomatic driver, or what?
It's been awhile since I last used my printer in F12. There have been a lot of updates via yum done since whenever that last time was so I don't know precisely which update and when broke things. Attempting to use it today was a no go. It would appear to be a 'udev' issue according to last message logged into /var/log/messages.
My wife's Windows computer is connected to same printer via a parallel cable and it works fine for her so it's not a hardware failure.Consider this solved. Reason for printer failure: Major OP error. The solution was actually rather simple: sudo service cups start
I've installed F14 [32 bit] and trying to configure a HP DeskJet 812C on my local netowrk[lpd://192.168.1.35/PASSTHRU] However, the "New Printer" wizard calls KPackageKit that fails and reports, "Could not find printer driver in any configured software source". It is just a dead end!
View 2 Replies View RelatedI can't get the scanner to work. I get this:
[pedroski@fangshan ~]$ scanimage -L
device `v4l:/dev/video0' is a Noname USB2.0 1.3M UVC WebCam virtual device
device `hpaio:/usb/Deskjet_1050_J410_series?serial=CN0CN3H3CZ05HW' is a Hewlett-Packard Deskjet_1050_J410_series all-in-one
and this
[pedroski@fangshan ~]$ scanimage -d hpaio:/usb/Deskjet_1050_J410_series?serial=CN0CN3H3CZ05HW -T
scanimage: open of device hpaio:/usb/Deskjet_1050_J410_series?serial=CN0CN3H3CZ05HW failed: Device busy.
Fedora came with 'Simple Scan' That also returns 'device busy'. Can this scanner work under Fedora? I have tried turning it off, then on. I have rebooted. I have hpijs and hplip installed also hplip-gui. I have put myself in the group lp.
I had set up a newly purchased HP F4488 using HPLIP, I installed it on my Fedora 10 desktop and it worked fine for the past 2 days. Suddenly, it is failing to print. The scanner works and the photocopier works. When a print job is initialized there is an error and the printer gets disabled.
View 3 Replies View RelatedI have problem with my printer HP Deskjet D1460. My printer is configured and works. When I send a file on the print, the printer clings a sheet of paper and starts to print, but a paper as was clean so clean and remains, after printing.
View 2 Replies View RelatedWhile installing openmpi it is requried to mount using following command:mount nfs yourmachineIP /mnt/nfs but executing this command gives following error: mount: directory to mount not in host:dir format although i m able to mount a folder using mount �t nfs yourmachineIP:/dir /mnt/nfs where /dir is specified in /etc/exports. Is it possible 2 mount only using IP? in that case what should be mentioned in /etc/exports?
View 1 Replies View RelatedI am running Fedora9 on a Dell Latitude D620. I am trying to install NIST-DYMO (the ad-hoc routing protocol) and am getting the following errors:nist-dymo/dymo.c:167: error: �NF_IP_PRE_ROUTING� undeclared (first use in this function)nist-dymo/dymo.c:174: error: �NF_IP_LOCAL_OUT� undeclared (first use in this function)Netfilter is installed, and I also have the kernel header files installed.
View 1 Replies View Relatedi don't have connection in my compuer write now so i whant to install RT2870 driver but i don't know how i found this tutorials [URL] but i can't install may be i have error in choise package this is my kernel version Linux Ouz3r4 2.6.35.10-74.fc14.i686 #1 SMP Thu Dec 23 16:17:40 UTC 2010 i686 i686 i386 GNU/Linux i found this driver too [URL] but how to install
View 1 Replies View RelatedWe have a network of 20 boxes and the router dealt with DHCP, but I'm planning to assign the DHCP task to the linux box. Any heads up? eth card configuration, network topology... etc.?
View 8 Replies View RelatedI had Fedora 7 which works fine with my PCI card Linksys WMP54G-EU (00:0b.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)).
It ran with ndiswrapper.1.51.
Yesterday I installed the live-CD Fedora 10 on a new partition in another hard drive and so I have Fedora 10 but WITHOUT Internet connection.
I tried to install Ndiswrapper but the 'make' command doesn't exist in my Fedora 10 !
What are all the things I need to download from Internet to ensure the several commands like 'make uninstall', 'make', 'make install'... and to ensure installing Ndiswrapper ?
just trying Fedora 15 and can't get the RT3062 driver to work, when i try Make command i get this:
Code:
make -C tools
make[1]: Entering directory `/home/raiden/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/tools'
gcc -g bin2h.c -o bin2h
make[1]: gcc: Command not found
make[1]: *** [all] Error 127
[Code]...
I updated to the recent 9.10 version of Ubuntu and found that my printer no longer works. When trying to print, the printer just blinks and *occasionally* makes a noise and prints out a partial line of text or whatever. It's a USB connecting HP Deskjet D1420 that is not a network printer and does not need to be networked.
[Code]...
I seem to be having on going issues with my printer. I was able to print a garbled test page but I get a result from terminal of printer HP-Deskjet-f2400 now printing HP-Deskjet-f2400-0. enabled since Mon May 31 15:45:04 2010 Connecting to printer... and it just sits there. Nothing is in error with the printer itself though.
I have enabled 2 screenshots.
I recently installed Ubuntu 10.04 on my computer. Everything works except for my HP Deskjet D2660 printer. The printer is recognized, but it will not print. HP-check shows no errors or warnings. The printer works fine on another computer with Ubuntu 9.10
View 4 Replies View RelatedWhen I go to System->Administration->Printing no window pops up. Down on the bottom panel it says "Starting Printing" and then goes away. I'm trying to install my HP Deskjet printer,
View 3 Replies View RelatedI have spent a few hours on this, trying various combinations of instructions. The nearest I got was when I followed the instructions from the HPLIP site, but it ended up with telling me some dependencies were not installed. I installed them using the Mintinstall tool, but still no go.
Before I spend any more time on this, I would like to know if there is a user out there who has got this particular printer to run on the Mint 7 distribution? If somebody has, then I know it is at least possible, and I will persevere!
We recent got this printer as the three others are old, hard to maintain, and don't work. However, there's been no end of trouble. We've had to initially install it under Windows, which is no trouble. Intending to put it to wireless use, I've hit a problem. The HP printer tool in Slackware 13.0 claims that CUPS either isn't installed (which it is) or isn't running (which it is)
So I kept it on USB and shared it, providing yet more trouble. Slackware again seems to have trouble with CUPS (using the Printing tool from GSB). Now, Ubuntu Jaunty, the other Linux on the network, can see this printer, but doesn't have a driver for it, meaning it can't use it.
What I'd like to do is switch it to wireless. I can do that, but I don't know what to install on the two Ubuntu PCs to get the HP printer tool, or if on Jaunty, it still needs to be given the drivers for it, and on Slackware, CUPS is the problem (Though may be solved with an install of something else before long)
I tried setting up my printer, HP Deskkjet D2660, using CUPS. I enabled the CUPS service and configure the printer through it. But when I try to test print, my printer wont print.
Now, i tried to look at the net for possible answer and somewhere, I read that my printer needs the newer version of hplip than the one included with the default slackware 13.0 install.
1. Do i really need to update hplip just to make my printer work? Do anyone uses the same printer model and make it work without updating the said package?
2. If i really have to update it, is there any Slackbuild script I can use to make the hplip-3.10.6.tar.gz into slackware package? I prefer creating package than installing using make.
On one of my F10 boxes yesterday, I installed several NM packages with yum update after being advised of their availability. Today, (the first reboot since installation) I no longer have network access on that box.
View 2 Replies View RelatedI installed Nvidia drivers according to the post in HowTos section. It downloaded a different version of the existing kernel, i guess. And the kernel using which I downloaded, when shows up GUI, looks like a Safe Mode of Windows. So I boot the kernel that it downloaded. And there the problem is that in Network Manager applet, it doesn't show me the wireless connections. It doesn't even show the Enable Wireless checkbox upon right clicking it. How to get it back?
View 4 Replies View RelatedIm just after installing fedora 12 dual boot with windows 7. When I try to find my wireless network the laptop doesn't seem to picking it up. It works perfectly when I connect with a LAN cable.
View 2 Replies View RelatedI installed the Printer, but Xsane does not recognize the scanner, how can i acivate the scanner. my system is Debian Lenny 507 Kde i386. I have looked through the posts in the forum, but found nothing that can help me. can somebody point me in the right
View 14 Replies View RelatedI am attempting to install my hp Deskjet D1660 printer and I am getting a dependency error that states I am in need of the GNU gcc C+ or C++ compiler. I know I have the latest gcc compiler installed on my system already. I am running SUSE 11.3.
Code:
warning: Missing REQUIRED dependency: gcc (gcc - GNU Project C and C++ Compiler)
warning: This installer cannot install 'gcc' for your distro/OS and/or version.
error: Installation cannot continue without this dependency. Please manually install this dependency and re-run this installer.
Code:
# zypper install gcc
Loading repository data...
Reading installed packages...
'gcc' is already installed.
No update candidate for 'gcc-4.5-4.2.i586'. The highest available version is already installed.
Resolving package dependencies...