General :: Windows Can See Ubuntu Server Printer, But Can't Print To It?
Feb 5, 2010
I have an old desktop that I'm trying to set up as a home backup/print server. Backup was trivial, but am having issues getting the printing to work. The printer is connected to the server running Ubuntu Server 9.10 (no gui). If I access the printer via http://hostname:631/printers/, I am able to print a test page, so I know the printer is working; however, I am having no luck from Windows. Windows can see the printer when browsed via hostname, but I am unable to connect. Windows says "Windows cannot connect to the printer" without indicating why.
From /etc/samba/smb.conf:
[global]
workgroup = WORKGROUP
dns proxy = no
security = user
[Code]...
View 5 Replies
ADVERTISEMENT
Oct 14, 2010
I have a laptop running Ubuntu 10.04 and my basement computer running Windows 7. I want to be able to access files on on both computers from either. I also want to be able to print from my laptop to the printer attached to the basement computer. I finally got printing working. Then I tackled the filesharing. I finally get filesharing working and now, I can't get printing working again, even though I've gone back to the version of smb.conf that I had when I was able to print. So here is what I've got.
<->testparm
Testparm results.txt
<-> Printer State
When I look at my printer properties in Ubuntu I see the status: Idle - Unable to connect to CIFS host after (tried 3 times) Cups Error Log When I look at the Printer Error Log, I see: (partial) Printer log extract.txt I can ping the IP address of the windows box 192.168.0.5, but when I try to ping the name owner-pc it fails. This would lead me to beleive that the there is a name resolution problem.
View 1 Replies
View Related
Aug 8, 2011
I have a windows 2008 server that has 2 printers attached, both are shared in the same way with the same access rites. One printer I can print to without any issues, I get prompted for my domain username and password then the job is processed, the other I can't print to. When printing a test page cups just ques the job and I get errors in the logs :
E [08/Aug/2011:16:44:39 +1200] [Job 12] Session setup failed: NT_STATUS_LOGON_FAILURE
E [08/Aug/2011:16:44:39 +1200] [Job 12] Session setup failed: NT_STATUS_LOGON_FAILURE
E [08/Aug/2011:16:44:39 +1200] [Job 12] Tree connect failed (NT_STATUS_BAD_NETWORK_NAME)
[code]...
View 6 Replies
View Related
Oct 21, 2010
Yesterday I installed FC13.i636, Gnome 2.30.0, on my Dell Latitude D505 laptop. Fresh install from live CD, single partition. Installed all 400+ recommended updates last night. System is working *very* smoothly.I want to print (wireless connection) to my Canon MP160 printer, which is attached to my WinXP machine, and is set as a Shared printer in WinXP. I can print to it fine with my iBook.I used the System/Admin/Printing app to set up a networked printer, letting the app "find" the printer. Printer now shows in the app as:
lpd://192.168.1.108
I choose the appropriate driver and tried a test page. Test page job results in queue showing job "processing" but nothing comes from printer, even ten minutes later. Printer properties show:
Printer state: Idle - /usr/lib/cups/backend/lpd failed
How do I fix the "failed" problem?
View 14 Replies
View Related
Apr 10, 2011
Using openSUSE 11.4 and winXP pro sp3I am a complete noob to linux.I went into YAST2 and added a printer--none were found. I used the connection wizard and selected Print Via Print Server Machine>>Windows or Samba.i entered the winxp info
server: daddy
Printer Share Name: HP4200
Workgroup: MSHOME
[code]...
View 9 Replies
View Related
Aug 30, 2010
I'm giving up in ever hoping that I'll get printing working with windows 7 with the strange comments I've found on the net. Basically I have a samsung ML2240 printer shared on the network, everything can print to it fine except for my windows 7 laptop. It's shared via Samba.
Quote:
Once you have extracted the driver files, copy the 32-bit drivers to the /usr/share/cups/drivers directory and the 64-bit drivers to the /usr/share/cups/drivers/x64 directory exactly as named below:
[Windows 2000 and higher]
ps5ui.dll
pscript.hlp
pscript.ntf
pscript5.dll
However after checking this, I dont have the files named within int he correct folder on my windows system :
%WINDIR%SYSTEM32SPOOLDRIVERSX643 folder for 64-bit drivers.I've tried installing the printer via the windows installer, however this adds the driver then tells me its not working and fails to print. I really dont know where to turn with this one. I've tried installing the samsung supplied drivers from the website. However they still fail to connect.
View 4 Replies
View Related
Mar 18, 2010
I have a FC12 machine installed with CUPS and a CUPS-PDF printer. Printer are shared and works fine with this URL:
[URL]
I have both client machine Windows XP and Windows 7. Both has setup the above printer and print fine without any problem. I can get the PDF file from windows test print. The only problem is I face is wait for around 20 seconds for printer dialog prompt out when I press print button in Windows 7. However, my windows XP never t have this problem. The printer dialog prompt out immediately when I press print button.
View 2 Replies
View Related
Jun 26, 2009
A few months ago a client had me build a small file server running OpenSuse for them. They also had me install an HP Designjet 650C on the server and share it on the network for 2 desktops to print to. All went well and there have been zero problems. They use a few specialty apps that don't have good enough FOSS counterparts, so I couldn't talk them into switching the desktops to Linux, although they were very interested in it. One of the desktops runs Vista and has an XP Pro VM on it (they are considering a Linux VM to go with it so they can dip their toes in the water). There was a locally installed HP OfficeJet 5610 on the machine, but printing from the XP VM was a hassle because they had to tell virtualbox to pass the usb interface to the VM, effectively disabling it in Vista. Then to print in Vista again they had to release the interface back to the host OS. The other desktop (running XP) was also unable to print to it. They asked me to install the 5610 on the server and share it like I did the 650C.
Installing it on the server was easy. I just plugged it in and checked to make sure everything was neat and tidy in YaST. It printed flawlessly. I configured the share identically to the way I shared the 650C. I browsed the network from Vista, found the printer, and installed it using Vista's native driver. Then I sent a print to it from Vista and nothing happened. Vista is very slow to communicate with the printer compared to the 650C, but it will eventually report that the print job was successful. The printer never receives the print, though. Where are the print jobs going? The VM and other desktop are as big of a problem. XP does not natively support the 5610, so I have to download a driver from HP's site. The driver uses a stupid binary installer that will not allow the driver to be manually installed. Running the installer works, but the driver will not install until it sees the printer in a usb port. That won't work because we are connecting to it over a network path. Where can I find a driver that can be manually installed?
View 8 Replies
View Related
May 24, 2010
I am looking for a wireless usb print server that will work with my netbook running ubuntu and my main pc running windows.
View 1 Replies
View Related
Apr 22, 2010
a newbe one, but its if my fifth try in using ubuntu for working with Architecture, so... my problem is...I have a plotter (xerox 2230ij) connected in a print server, i tryed to connect in lpt1 port and was sucessful with HP 750 plus driver... so.. yay! but my original intend is to connect in print server and all the computers (windows/ubuntu) use that.But when i connect in PS, i cant see the plotter, but i can acess the PS (Dlink)so.. what i have to do, to make thing working well? and i have virtualbox with windows XP, can XP acess that plotter as well?here a small scheme of my connections...
Code:
router -----------------------------------
| |
[code]...
View 1 Replies
View Related
Nov 23, 2009
I just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
View 6 Replies
View Related
May 21, 2010
We are using lpr as a print server. What I want to do is, configure the lpd print server so that before it accepts any print job for some printer, it checks if the printer is available or not. If the printer is available, then only it is supposed to accept print jobs...if not, it should not accept the print jobs at all. How do I accomplish this feature?
View 3 Replies
View Related
Jul 22, 2009
I am having FC11 with an HP prineter attached my firewall is disabled I trying to print from my laptops after I have setup samba and shared the printer , It was working fine when I was installing FC4 and FC5 I am not sure what is missing when I tried to print from the XP box I got "Test pge failed to print" error what I have really noticed in the xp and vista box is that when I go to the printer settings inside control panel , pressing the ports tab and checking to what port I am printing I see that the port "\samba-serverprinter" is not created there this is the log
[code]...
View 1 Replies
View Related
Apr 9, 2011
I have a Synology DS110+ NAS which has print server feature. It is powered with a lightweight Linux version. I also have a Canon LBP2900 printer which is compatible with Linux, and I can use it with the proprietary driver if connected directly to my computer. As the NAS doesn't have this proprietary driver, it doesn't detect the printer as such when plugged in. How can I install this driver on the NAS?
View 8 Replies
View Related
Dec 26, 2010
My wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?
View 5 Replies
View Related
May 24, 2011
Since last few weeks i am struggling to setup printer connected to print server.
Here is the setup that i have:
I have Red Hat Linux machine from which i want to issue print jobs.
I have Windows Print Server having multiple printers connected to it.
I am able to print jobs from Windows client to any of these printers. But i am not able to print from Red Hat Linux. (i have verified that i can print using smbclient utility, but based on my reading, CUPS API could be used from application to discover, print and issue print jobs.)
I am not able to get the correct configuration for setting up CUPS client.
View 3 Replies
View Related
Sep 18, 2009
I have a Centos 5.3 server with Samba file shares and a shared Samba printer. I am not running a domain.
I recently changed my windows desktop pc from an XP machine to a vista 64 machine... It has a different user name. Everything went pretty smoothly - and the and the vista machine found the smba printer - and even downloaded the driver from the samba server. he printer works OK - and the file shares are fine.
The only thing which is quite odd - is that the Printer Properties dialogue takes more than 30 seconds to come up - and every action you attempt with the dialogue takes a similar amount of time.
I will include below the essence of my smb.conf:
View 3 Replies
View Related
Apr 1, 2009
My setup is like this: i have a small office network and i bought yesterday a new multifunctional printer Samsung SCX-4521F. It is shared with samba and connected to the server with USB. In the network everyhing works well, users can log on to the domain, print from windows to the new shared Samsung printer and i even managed to enable network scannin. But when i try to print from MS DOS i wont get a single page. We have an accounting program in dos. All the other computers are XP Pro SP3. My server is running for 2 weeks the newest CentOS with all updates. I'v maped the network printer in windows witht the command "net use LPT1 \ServerSCX-4521F. I get a message that maping was completed succesfully. If i start a print job nothing happens. "Printing" or "warming up" flashes several times on the printer and thats it.
CUPS error log:
I [02/Apr/2009:00:03:45 +0300] Adding start banner page "none" to job 125.
I [02/Apr/2009:00:03:45 +0300] Adding end banner page "none" to job 125.
[code]....
View 3 Replies
View Related
Jul 26, 2010
I am trying to configure linux printer Server.
Setup : Using Centos 5.3
Printer : hp 4350
At present we are using windows print server getting user name and authenticated from domain server. I need your suggestion to configure linux printer server and how to share the printer to users and how to limit the user in taking printouts.
View 1 Replies
View Related
Oct 27, 2010
I've tried to copy different tutorials so that I can put on paper everything prints except the important things(commands & script examples. Is this some kind of copy-right? If not issue with copy-right is it possible to have complete copy. Also I haven't seen in PDF form, I just need to copy so I can reference without having to be on computer.
View 4 Replies
View Related
Apr 13, 2011
Two users on both Ubuntu server and Windows 7. Both users admins on Windows. Used SWAT to set up Samba. Printer is local to Ubuntu server. User A can access both file share and printer on Ubuntu server from Windows. User B can access the file share but can only see the printer, not use it. Have looked everywhere I can think of to find out why one user has access and the other doesn't on both Windows side and Ubuntu side. As far as I can tell, they are set up the same. Can anyone provide some direction on what I should look at to find out what might be preventing User B from being authorized to use the printer on Ubuntu?
View 2 Replies
View Related
Aug 6, 2010
I can't print pdf files from the Ubuntu PDF viweer on my printer - I get a message that 'pdftorasterfailed'. My workaround is to print to file then print the postscript file. Annoying but it works. I did some searching and this is a known bug in cups for Ubuntu 10.04. The first thing I tried was a system update, that did update cups but it still fails. I found this link:
[URL]
and have the patch files, but how do I apply them?
View 8 Replies
View Related
May 1, 2010
Can CUPS print to a color printer? And also do I need a GUI running on my computer in order for CUPS to work?
View 1 Replies
View Related
Feb 15, 2010
I'm trying to get GS to print to network Windows printer, but somehow fail to do so . I managed to print through CUPS to that printer but if I use GS with -sDEVICE=cups nothing happens, nothing is printed, CUPS logs remain unchanged... I also found command using smbclient (gs ... | smbclient //machine/printer -U user ... -c 'printmode graphics;print-') but that one fails with "session setup failed: NT_STATUS_REQUEST_NOT_ACCEPTED" Here is why I need it, so maybe you know better way: We need to print thousands of PDF files in one print job (to prevent anybody else to send something else in while we are printing this). I was trying to develop small C program using GS API to achieve this but somehow I fail on something as trivial as print something on shared network printer.
View 3 Replies
View Related
Dec 20, 2010
Failed to print to HP printer from Ubuntu 10.10.. i get error - {'printer-state-message': u'/usr/lib/cups/filter/foomatic-rip failed', 'printer-state-reasons': [u'none']}
View 1 Replies
View Related
Feb 20, 2011
I am trying to set up printing on my Fedora 14 laptop, on my home network.
Details:
- Home network, single subnet, the desktops are connected to the switch portion of my Linksys via Ethernet and all have static addresses. Name resolution between them is via hosts file entries. The router is running wireless (WPA2/AES/DHCP) to accommodate my laptop which is dual boot XP Pro and Linux Fedora 14.
- The printer is an HP Deskjet F4180 printer. It is attached via USB to a Windows XP Pro box and shared. The XP box is wired and static ip.
- I am able to see all the shares and print to the shared printer from any of the Windows boxes, wired and wireless, including my laptop when I run Windows on it.
- My Fedora 14 is working fine on wireless, using Network Manager and KDE desktop. I am able to access all the Windows shares on both of my wired desktops. One desktop is XP Pro, the other is Windows 7.
This is what happens when I try to set up printing on Fedora:
- I go to Administration / Printing and click to Add a Printer.
- I am prompted for the root password twice, which I put in.
- I select Network Printer / Windows printer via samba and click on Browse...
- It finds my WORKGROOUP and machine name mig29 and prompts for user ID and password which I type in.
[code]....
the user ID and logon on Fedora is different from the one on Windows. During setup I am prompted for credentials. It seems to me that somewhere down the line Fedora supplies not the credentials I supply but my local user ID and password and it obviously fails.
View 8 Replies
View Related
Jul 24, 2011
I got a hp 3050J610 wireless all in one and hooked it up to my wireless network
and it works fine from windows vista from my hp notebook. I also run puppy 5.1
off a pen drive which runs fine on the laptop. Puppy sees my network fine and
goes on the internet from my satalite modem over the wireless network no problems.
I installed the wireless printer to puppy with the cups wizard without any errors or problems. Cups found the printer and correct ip address no problem. I used the 610c driver from the cups menu which I assume is the right one. I can't seem to find another one. It lists the printer and lists the right ip address. when I try to print it shows it is printing the print job but nothing happens at the printer. I look in the print manager and it shows the print job was done. I can ping the ip address and get a responce.
View 3 Replies
View Related
Oct 25, 2010
I have a mail-account, which is checked every 10. Minute for new mails (via getmail), printed(via cups/lpr) and the file is deleted if successful.
My problem is that I dont want to print the texthtml, but what it looks like when rendered.
What is the best way of doing this ? html2ps or ?
Is it also possible to print the attachments( PDF) inside the mail, this way ?
View 3 Replies
View Related
Jul 15, 2011
Our one remaining problem seems to be printing. She has an HP OfficeJet 6500 USB printer. We have the computer conntected. Strangely, when I boot from the CD the printer shows up as installed even though I did nothing to install it. After having submitted a print job it shows the printer status as "idle" and the print queue is empty. I tried deleting that printer and re-installing. The installation went as one would expect. However the results are the same. I'm beginning to think that somehow the problem is related to the fact that we are operating from the live CD. getting this thing to print from the live CD.
View 9 Replies
View Related
Jun 5, 2010
i have custom programs written in Basis pro5. Standard output to a pdf virtual printer works fine. Using pdftk to overlay on to a form is hit or miss.... There are products out there like Unform that are just too expensive for my company. i have purchased another product from a company that prints the forms to the laser perfectly but i am incapable of capturing them and saving them as pdf's for archiving/emailing/faxing and i don't much care for this company.
View 2 Replies
View Related
