I have a mail-account, which is checked every 10. Minute for new mails (via getmail), printed(via cups/lpr) and the file is deleted if successful.
My problem is that I dont want to print the texthtml, but what it looks like when rendered.
What is the best way of doing this ? html2ps or ?
Is it also possible to print the attachments( PDF) inside the mail, this way ?
Can CUPS print to a color printer? And also do I need a GUI running on my computer in order for CUPS to work?
View 1 Replies View RelatedI am hard time printing to one particular Canon IR8500 printer Red hat.WE are using CUPS to manager around 30 printers.when I try to start the printer from CUPS, it comes back immediately to Printer State: Stopped, accepting jobs..After I delete it and redefine it, the status says Idle, but as soon as I submit a job, the status change to 'Stopped'.
View 4 Replies View RelatedWhen I try to print something there is only some led blinks on printer and nothing is print. I am using drivers from brother(cupswrapper). I am using CUPS 1.3.11. I didn't have any problems on my previous installation of slackware(but I don't know which driver I've used).
View 11 Replies View RelatedI have a FC12 machine installed with CUPS and a CUPS-PDF printer. Printer are shared and works fine with this URL:
[URL]
I have both client machine Windows XP and Windows 7. Both has setup the above printer and print fine without any problem. I can get the PDF file from windows test print. The only problem is I face is wait for around 20 seconds for printer dialog prompt out when I press print button in Windows 7. However, my windows XP never t have this problem. The printer dialog prompt out immediately when I press print button.
Does anyone know how to set up an print-to-file-printer with an alternative system to CUPS? The quality suck on CUPS and there's NO solution, at least i didn't found anyone
View 3 Replies View RelatedTrying to print from my laptop to friends wireless printer. I see his printer "7600 Series" in Network - File Browser. How do I print to his printer. I have text document. I click on "Print", but only "Print to file comes up".
I did System -> Printing -> Help -> Troubleshoot
Got: CUPS Service Stopped
The CUPS printer spooler does not appear to be running. To correct this choose
system -> Administration -> Services
There is not "Services there"
What to do? Ubuntu 10.04 LTS
the remote printer appears in cups but if I try to do a test page i get a page not found error. it even says ready under yast printers.it is set up on a remote desktop using cups
View 8 Replies View RelatedI noticed that a bit after I had updated Ubuntu 10.04 through the Update Manager, I couldn't print at all! (I run ubuntu 10.04 on my laptop and have a networked HP Officejet 6110xi all-in-one printer connected to a comp running Windows XP home on the same LAN). Everything works when I boot up in windows vista, so the problem is definitely in Ubuntu.
First, I checked the printer jobs and it said that there was an error with a filter or something. Restarting the job didn't do squat, so I decided to try reinstalling my printer, but get the same CUPS error "error-client-not-possible" right after I click "Apply". I then Googled the issue but didn't find much of anything, so I thought I'd try reinstalling CUPS. No luck there either... Same error again and again.
My setup is like this: i have a small office network and i bought yesterday a new multifunctional printer Samsung SCX-4521F. It is shared with samba and connected to the server with USB. In the network everyhing works well, users can log on to the domain, print from windows to the new shared Samsung printer and i even managed to enable network scannin. But when i try to print from MS DOS i wont get a single page. We have an accounting program in dos. All the other computers are XP Pro SP3. My server is running for 2 weeks the newest CentOS with all updates. I'v maped the network printer in windows witht the command "net use LPT1 \ServerSCX-4521F. I get a message that maping was completed succesfully. If i start a print job nothing happens. "Printing" or "warming up" flashes several times on the printer and thats it.
CUPS error log:
I [02/Apr/2009:00:03:45 +0300] Adding start banner page "none" to job 125.
I [02/Apr/2009:00:03:45 +0300] Adding end banner page "none" to job 125.
[code]....
I initially had a problem accessing the CUPS interface (see my other post) and got that resolved by adding the user "cupsys". Now, everything "looks" ok, and when I print a test page, it shows it as completed (in CUPS). However, the page never prints.
The printer is a Canon MP600 (using the canonmp600en.ppd file to configure it). Here's the output of my conf file.
Code:
# Show troubleshooting information in error_log.
LogLevel debug
[code]...
Not sure when CUPS started acting up. I have the latest 13.1 current software installed.The first page to print is always OK, but all succeeding pages are overwritten. The second page shows the first page on top of it, and the third shows the preceding pages on top of it - and so on. Has anyone else seen this problem?I guess the printer buffer is not getting flushed correctly. If my configurations were trashed in some way, I don't know where to look for a fix.
View 14 Replies View RelatedI have cups 1.4.1 on ubuntu that act as print server that receive print request from Oracle Applications 11i on hp-ux and sends them to windows clients.
Clients printers are from different vendors like Samsung, HP and Kyocera.
Some printers print request with Cover Page with content of "job-id job-name job-originating-user-name job-originating-host-name job-billing" like Samsung ML-2250 or HP Laserjet 1100
but in Kyocera print without banner.
Im trying to set up a print server using Fedora 12 and CUPS.
It recognized the printer, and i can print from the linux box. When i try to install it on my Win 7 64-bit box i can install the printer itself by giving it the IP address and port number of the linux box but i cant sent anything to it to print. I apologize im a little rough on the details, im not at home right now. I believe the printer i have is a HP PSC 1500. I opened the cups port on the linux firewall, and i shared the printer through the cups admin browser page.
I configured cups and I managed to print successfully with generic text only but my problem is that the printout always comes out as 80 columns. anything more than 80 colums wraps on the next page. I tried changing the pagesize at the textonly.ppd but it didn't work.my textonly.ppd is
*PPD-Adobe: "4.3"
*%
*% Text-only printer definition
[code]...
Since last few weeks i am struggling to setup printer connected to print server.
Here is the setup that i have:
I have Red Hat Linux machine from which i want to issue print jobs.
I have Windows Print Server having multiple printers connected to it.
I am able to print jobs from Windows client to any of these printers. But i am not able to print from Red Hat Linux. (i have verified that i can print using smbclient utility, but based on my reading, CUPS API could be used from application to discover, print and issue print jobs.)
I am not able to get the correct configuration for setting up CUPS client.
I have installed centos 5 and can print small to medium lpr files using cups fine (1 to 20 pages), but when i tried to print a file of 95 pages the printer just stops, I have to power off the printer and turn it back on and it will start printing again. It looks like some data is lost in this process. It may print 20 pages and stop. When restarted it may print 20 or 40 or complete the report.I can print to the devicectly and it works fine. It is only when the large print jobs are run through the spooler.I have tried on different printers and the same results, that's what makes me think it is a spooler problem.
View 2 Replies View RelatedI am running Slackware 13.1 64bit and the cupsd config is the one pretty much the default. I can connect to it from my browser at http://localhost:631 and play around with the options with no problem. I have been following a previous post on configuring a PDF printer [URL]. I am at the point of using lpadmin on the command line to create the pdf printer with the adobe distiller ppd file. When I try to do so it just hangs and eventually I get a connection timeout. When I do an lpinfo -v I get the same thing. If I try lpinfo -h localhost:631 the request returns immediately with nothing. I tried to create the PDF printer through the cups web ui but I did not get far.
View 2 Replies View RelatedI'm running Red Hat Linux and CUPS 1.2.4. I can print a test page to a Win 7 shared printer ok. However, when I issue the lpr command from a user or root, it won't print. The CUPS message is "Remote host did not accept data file (1)" and the job just hangs till I cancel it. The only thing I can tell that is different is that when the test page from CUPS is generated, it uses user "guest". When I try to print it using the lpr command, the user is "eddie" or "root". I tried adding a user account named "eddie" to the Win 7 box, I can print successfully from both CUPS and users on several other Win XP boxes.
View 11 Replies View RelatedI have printer in CUPS that due driver problems (hp 1010) form time to time goes into pause. I would like to write a shell script that will be once per hour resuming printer in cups.But I have no idea after googling for couple of minutes how to resume printer from shell command line.
View 5 Replies View RelatedI have a client.conf in /etc/cups that points to a CUPS server. I don't have u/p access to this server. I also want to print to a local printer (USB), but I can't set it up - ALL attempts bring me back to the CUPS server password prompt. Is there some line I can add to the client.conf to allow me to use a local printer?
View 4 Replies View RelatedHow to enable Printer in CUPS using Command Line?
View 3 Replies View RelatedMy wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?
View 5 Replies View RelatedI've tried to copy different tutorials so that I can put on paper everything prints except the important things(commands & script examples. Is this some kind of copy-right? If not issue with copy-right is it possible to have complete copy. Also I haven't seen in PDF form, I just need to copy so I can reference without having to be on computer.
View 4 Replies View RelatedI'm trying to get GS to print to network Windows printer, but somehow fail to do so . I managed to print through CUPS to that printer but if I use GS with -sDEVICE=cups nothing happens, nothing is printed, CUPS logs remain unchanged... I also found command using smbclient (gs ... | smbclient //machine/printer -U user ... -c 'printmode graphics;print-') but that one fails with "session setup failed: NT_STATUS_REQUEST_NOT_ACCEPTED" Here is why I need it, so maybe you know better way: We need to print thousands of PDF files in one print job (to prevent anybody else to send something else in while we are printing this). I was trying to develop small C program using GS API to achieve this but somehow I fail on something as trivial as print something on shared network printer.
View 3 Replies View RelatedFailed to print to HP printer from Ubuntu 10.10.. i get error - {'printer-state-message': u'/usr/lib/cups/filter/foomatic-rip failed', 'printer-state-reasons': [u'none']}
View 1 Replies View RelatedI'm trying to set up Getmail with Alpine. This is because I have a pop mail account, and I want to be able to recieve and reply to mail without beeing online.
My question is what to type under the [destination] paragraph. I don't know what type mailbox Alpine uses and where the INBOX is located, that is where Getmail should deliver the mail?
I have an old desktop that I'm trying to set up as a home backup/print server. Backup was trivial, but am having issues getting the printing to work. The printer is connected to the server running Ubuntu Server 9.10 (no gui). If I access the printer via http://hostname:631/printers/, I am able to print a test page, so I know the printer is working; however, I am having no luck from Windows. Windows can see the printer when browsed via hostname, but I am unable to connect. Windows says "Windows cannot connect to the printer" without indicating why.
From /etc/samba/smb.conf:
[global]
workgroup = WORKGROUP
dns proxy = no
security = user
[Code]...
I can't print pdf files from the Ubuntu PDF viweer on my printer - I get a message that 'pdftorasterfailed'. My workaround is to print to file then print the postscript file. Annoying but it works. I did some searching and this is a known bug in cups for Ubuntu 10.04. The first thing I tried was a system update, that did update cups but it still fails. I found this link:
[URL]
and have the patch files, but how do I apply them?
I have a laptop running Ubuntu 10.04 and my basement computer running Windows 7. I want to be able to access files on on both computers from either. I also want to be able to print from my laptop to the printer attached to the basement computer. I finally got printing working. Then I tackled the filesharing. I finally get filesharing working and now, I can't get printing working again, even though I've gone back to the version of smb.conf that I had when I was able to print. So here is what I've got.
<->testparm
Testparm results.txt
<-> Printer State
When I look at my printer properties in Ubuntu I see the status: Idle - Unable to connect to CIFS host after (tried 3 times) Cups Error Log When I look at the Printer Error Log, I see: (partial) Printer log extract.txt I can ping the IP address of the windows box 192.168.0.5, but when I try to ping the name owner-pc it fails. This would lead me to beleive that the there is a name resolution problem.