A few months ago a client had me build a small file server running OpenSuse for them. They also had me install an HP Designjet 650C on the server and share it on the network for 2 desktops to print to. All went well and there have been zero problems. They use a few specialty apps that don't have good enough FOSS counterparts, so I couldn't talk them into switching the desktops to Linux, although they were very interested in it. One of the desktops runs Vista and has an XP Pro VM on it (they are considering a Linux VM to go with it so they can dip their toes in the water). There was a locally installed HP OfficeJet 5610 on the machine, but printing from the XP VM was a hassle because they had to tell virtualbox to pass the usb interface to the VM, effectively disabling it in Vista. Then to print in Vista again they had to release the interface back to the host OS. The other desktop (running XP) was also unable to print to it. They asked me to install the 5610 on the server and share it like I did the 650C.
Installing it on the server was easy. I just plugged it in and checked to make sure everything was neat and tidy in YaST. It printed flawlessly. I configured the share identically to the way I shared the 650C. I browsed the network from Vista, found the printer, and installed it using Vista's native driver. Then I sent a print to it from Vista and nothing happened. Vista is very slow to communicate with the printer compared to the 650C, but it will eventually report that the print job was successful. The printer never receives the print, though. Where are the print jobs going? The VM and other desktop are as big of a problem. XP does not natively support the 5610, so I have to download a driver from HP's site. The driver uses a stupid binary installer that will not allow the driver to be manually installed. Running the installer works, but the driver will not install until it sees the printer in a usb port. That won't work because we are connecting to it over a network path. Where can I find a driver that can be manually installed?
My setup is like this: i have a small office network and i bought yesterday a new multifunctional printer Samsung SCX-4521F. It is shared with samba and connected to the server with USB. In the network everyhing works well, users can log on to the domain, print from windows to the new shared Samsung printer and i even managed to enable network scannin. But when i try to print from MS DOS i wont get a single page. We have an accounting program in dos. All the other computers are XP Pro SP3. My server is running for 2 weeks the newest CentOS with all updates. I'v maped the network printer in windows witht the command "net use LPT1 \ServerSCX-4521F. I get a message that maping was completed succesfully. If i start a print job nothing happens. "Printing" or "warming up" flashes several times on the printer and thats it.
CUPS error log: I [02/Apr/2009:00:03:45 +0300] Adding start banner page "none" to job 125. I [02/Apr/2009:00:03:45 +0300] Adding end banner page "none" to job 125.
Yesterday I installed FC13.i636, Gnome 2.30.0, on my Dell Latitude D505 laptop. Fresh install from live CD, single partition. Installed all 400+ recommended updates last night. System is working *very* smoothly.I want to print (wireless connection) to my Canon MP160 printer, which is attached to my WinXP machine, and is set as a Shared printer in WinXP. I can print to it fine with my iBook.I used the System/Admin/Printing app to set up a networked printer, letting the app "find" the printer. Printer now shows in the app as:
lpd://192.168.1.108
I choose the appropriate driver and tried a test page. Test page job results in queue showing job "processing" but nothing comes from printer, even ten minutes later. Printer properties show:
I have a windows 2008 server that has 2 printers attached, both are shared in the same way with the same access rites. One printer I can print to without any issues, I get prompted for my domain username and password then the job is processed, the other I can't print to. When printing a test page cups just ques the job and I get errors in the logs :
E [08/Aug/2011:16:44:39 +1200] [Job 12] Session setup failed: NT_STATUS_LOGON_FAILURE E [08/Aug/2011:16:44:39 +1200] [Job 12] Session setup failed: NT_STATUS_LOGON_FAILURE E [08/Aug/2011:16:44:39 +1200] [Job 12] Tree connect failed (NT_STATUS_BAD_NETWORK_NAME)
my 64 bit XP/fedora 12 box prints fine to a shared printer when I am in XP. The HP color lasterjet CP1215 printer is hosted by a 32 bit vista machine. I can located the printer on the network from Fedora 12 using the add a pinter utility, but I cannot print. I get no error message on the linux machine, but the "submitted " dialog box never goes away (not sure if it is supposed to go away). On the vista machine in the printers dialog box it says "remote downlevel document" in the document name section and "0kb" in the size section, then goes away. the printer does not make any noise.
Installed fedora/configued samba, shared printer and i am not able to access shared printer from any of the fedora machine. I am able to access the printer /shared folder from windows machine. I dont know the process of cups installation.
I am trying to set up printing on my Fedora 14 laptop, on my home network.
Details:
- Home network, single subnet, the desktops are connected to the switch portion of my Linksys via Ethernet and all have static addresses. Name resolution between them is via hosts file entries. The router is running wireless (WPA2/AES/DHCP) to accommodate my laptop which is dual boot XP Pro and Linux Fedora 14.
- The printer is an HP Deskjet F4180 printer. It is attached via USB to a Windows XP Pro box and shared. The XP box is wired and static ip.
- I am able to see all the shares and print to the shared printer from any of the Windows boxes, wired and wireless, including my laptop when I run Windows on it.
- My Fedora 14 is working fine on wireless, using Network Manager and KDE desktop. I am able to access all the Windows shares on both of my wired desktops. One desktop is XP Pro, the other is Windows 7.
This is what happens when I try to set up printing on Fedora:
- I go to Administration / Printing and click to Add a Printer. - I am prompted for the root password twice, which I put in. - I select Network Printer / Windows printer via samba and click on Browse... - It finds my WORKGROOUP and machine name mig29 and prompts for user ID and password which I type in.
[code]....
the user ID and logon on Fedora is different from the one on Windows. During setup I am prompted for credentials. It seems to me that somewhere down the line Fedora supplies not the credentials I supply but my local user ID and password and it obviously fails.
We are using lpr as a print server. What I want to do is, configure the lpd print server so that before it accepts any print job for some printer, it checks if the printer is available or not. If the printer is available, then only it is supposed to accept print jobs...if not, it should not accept the print jobs at all. How do I accomplish this feature?
I am sitting with a slight problem sharing some HP network printers (JetDirect) with my windows machines. I have cups 1.4.4 configured on my Debian PDC with samba 3.5.5. The printers in question, is configured in cups and is working perfectly, but for some reason when I try to add the printers from Win7 or Win Vista I get the following error:
"Connect to Printer Windows cannot connect to the printer Operation failed with error 0x00000006"
I had a look around and it seems that the above error code is tied in with incorrect drivers, but the strange thing is that if I create a new local port on the win machines and specify the shared printers they work. The problem then is that cups does not identify the jobs correctly. The job will be named something like "smbprn.00000264 Remote Downlevel Document" instead of the actual document name. One of the reasons for using cups is to be able to monitor printer usage so this option is a temporary solution in my mind. Can the print$ share be causing it although it is empty and no drivers has been uploaded? Neither the samba nor cups logs give me something concrete to work with (hopefully someone else can spot the problem).
Extract from samba log:
[2010/09/30 09:21:01.734938, 2] lib/access.c:406(check_access) Allowed connection from (192.168.1.20) [2010/09/30 09:21:01.740480, 2] lib/access.c:406(check_access) Allowed connection from (192.168.1.20)
Just recently got a few printers connected to the network at my shop and I've managed to get them connected in with samba for the linux clients. Whenever I try to print from one of the clients, the printer will click on and whiz away, but only prints on the first page stuff that looks like this:
Code: %!PS-Adobe-3.0 %%BoundingBox: 38 24 574 768 %%Title: Enscript Outpu %%For: User N
It seems to me that the printer isn't processing the postscript data properly (or I'm just not sending it in the right format) but I'm at a loss as to how to go about fixing it.
How to configure samba, cups, whatever else is necessary to turn centOS into a print server that provides the print driver to any client adding a printer shared from the server? For example, I have a Xerox Phaser 6125n and I was able to configure my server to share the printer for clients on the network, but I still have to have the driver available on each client that uses the printer. I want to be able to put the driver on the server and provide it automatically to any client who installs the printer.
Also, this is not as important but rather just an annoyance, I am having an issue with samba that I can't figure out. I have user shares set up on the server but the first time any user accesses their personal share they need to provide their password. How can I set up user mapping between linux and windows accounts so that authentication is automatic? I've done this in the past with Fedora Core 2, but that was a long time ago and the same doesn't work on centOS.
I have an old desktop that I'm trying to set up as a home backup/print server. Backup was trivial, but am having issues getting the printing to work. The printer is connected to the server running Ubuntu Server 9.10 (no gui). If I access the printer via http://hostname:631/printers/, I am able to print a test page, so I know the printer is working; however, I am having no luck from Windows. Windows can see the printer when browsed via hostname, but I am unable to connect. Windows says "Windows cannot connect to the printer" without indicating why.
From /etc/samba/smb.conf: [global] workgroup = WORKGROUP dns proxy = no security = user
a newbe one, but its if my fifth try in using ubuntu for working with Architecture, so... my problem is...I have a plotter (xerox 2230ij) connected in a print server, i tryed to connect in lpt1 port and was sucessful with HP 750 plus driver... so.. yay! but my original intend is to connect in print server and all the computers (windows/ubuntu) use that.But when i connect in PS, i cant see the plotter, but i can acess the PS (Dlink)so.. what i have to do, to make thing working well? and i have virtualbox with windows XP, can XP acess that plotter as well?here a small scheme of my connections...
I am having FC11 with an HP prineter attached my firewall is disabled I trying to print from my laptops after I have setup samba and shared the printer , It was working fine when I was installing FC4 and FC5 I am not sure what is missing when I tried to print from the XP box I got "Test pge failed to print" error what I have really noticed in the xp and vista box is that when I go to the printer settings inside control panel , pressing the ports tab and checking to what port I am printing I see that the port "\samba-serverprinter" is not created there this is the log
I have a Synology DS110+ NAS which has print server feature. It is powered with a lightweight Linux version. I also have a Canon LBP2900 printer which is compatible with Linux, and I can use it with the proprietary driver if connected directly to my computer. As the NAS doesn't have this proprietary driver, it doesn't detect the printer as such when plugged in. How can I install this driver on the NAS?
I have been working through setting up a CUPS server on my Dell Dimension 2000 which is running Ubuntu 10.04. I have the server set up and the printer added and have gone through all of the steps the tutorials suggest to get the printer to be viewed on the network (set it to shared, allow other machines to view shared printers, etc). However, I can't find this printer on any of the other machine on my LAN (one machine running mac os x the other running Ubuntu 10.10).
My wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?
I have installed Canon ImageRunner 2018i on my linux box using CUPS web interface. When I try to install this as a network printer from a Windows XP machine, the windows XP machine keeps asking me for a device driver. Is there a way to configure the printer on CUPS/Samba so that when I try to install it on Windows XP machine as a network printer, it does not ask me for a device driver?
At present we are using windows print server getting user name and authenticated from domain server. I need your suggestion to configure linux printer server and how to share the printer to users and how to limit the user in taking printouts.
Our one remaining problem seems to be printing. She has an HP OfficeJet 6500 USB printer. We have the computer conntected. Strangely, when I boot from the CD the printer shows up as installed even though I did nothing to install it. After having submitted a print job it shows the printer status as "idle" and the print queue is empty. I tried deleting that printer and re-installing. The installation went as one would expect. However the results are the same. I'm beginning to think that somehow the problem is related to the fact that we are operating from the live CD. getting this thing to print from the live CD.
My LaserJet is connected to an old desktop machine that has it shared. The configuration on that desktop is correct, since I have been printing through it from other Windows machines for a long time (and it still works now).
I recently started dual-booting Ubuntu 10.10 on my otherwise Windows laptop, and I've gotten everything basically working how I like it, except that I can't get connected to that printer.
The Vista machine is at IP address 192.168.0.103, and the printer is shared as LaserJet. It's set up with workgroup MSHOME.
When I go to add a printer in Ubuntu, I click the Browse button under "SMB Printer," and I see the MSHOME workgroup, but when I try to expand it, there's nothing inside.
If I try to type in the address directly (smb://192.168.0.103/LaserJet), the Verify button tells me "Print Share Inaccessible, Connection timed out." Note that I can ping 192.168.0.103 fine. I can continue through the rest of the wizard, but I obviously can't print anything out after I finish the setup, since the connection is failing for some reason.
There is no username or password required to see the shared printer.
Any idea what could be going on here? I'm kind of at wit's end here, and I'd love to be able to ditch Windows--with the obvious exception of Starcraft II, of course
I had a box running 9.04 that I upgraded to 9.10 and I cannot print or browse to shared drives from my iMac. I have several other Macs and PCs that work fine. This was the first that I setup to print on 9.04. I have attempted everything that I can find including installing in CUPS, using the ip address, etc. I can browse to workgroup and I see the computer but when I try to use either USERID guest or userid/passwd - I get no response.
I looked in the /var/log/samba for this computer and here is what I am getting for an attempt: [2010/02/04 12:09:08, 1] ../librpc/ndr/ndr.c:374(ndr_pull_error) ndr_pull_error(11): ndr_pull_advance by 469762046 failed [2010/02/04 12:09:08, 1] ../librpc/ndr/ndr.c:374(ndr_pull_error) ndr_pull_error(11): Pull bytes 2 [2010/02/04 12:09:08, 0] rpc_server/srv_pipe.c:2332(api_rpcTNP) api_rpcTNP: srvsvc: SRVSVC_NETSHAREENUMALL failed.
I have a file server running 11.04 w/ a shared printer connected to it, all my windows machines see it as shared & connect to it no prob. My laptop running the same OS 11.04 can see all the shares but no printer?
I cannot print pdf files. I click print in evince everything seems ok but nothing comes out on the printer. I receive no error. I have a HP printer (LasterJet 3005n) attached over a network. I am running 9.10 on a Dell Optiplex. I did not have this problem in 9.04. I had this problem immediately after I did a fresh install of 9.10. I can print open office documents without any problem, just not pdfs. I have the same problem with my serval laptop (also running 9.10).
I have 2 desktop PC's both running 10.4, both connect to internet thro a wireless router. One PC has a printer attached and I would like to be able to print from the PC without the printer attached, what is the easiest way to achieve this?
I've tried lpr [FILE] didn't work I've tried cat [FILE] > /dev/lp0 couldn't figure out how to get to the root prompt and I googled until my googler was sore. All I got was lengthy and confusing user manuals for cat. besides going through the trouble of loading GIMP everytime I want to print something?
I've looked at all the threads that I can find on the HP Deskjet D1660. I am unable to print. I've also tried to manually install the hplip files with no help. The only thing that I can find says to use a driver 3.10.2 but all I can find is 3.10.6 and 3.10.6.15. But non of this is working. XP prints fine but I want Ubuntu to work fine too. This is why I bought this printer in the first place.
I am running Ubuntu 10.10 on an emachine with a celeron micro processor and it has 2 gig memory. I have tried the usb cable in every usb slot available and ever thing else. When I go go print a job the hp panel shows that job is sent to printer and that the printer is printing it. Unfortunately it never get printed. I have tried even removing cups and hplip using synaptic and reinstalling them but no help.
I have recently bought a printer hp deskjet d1663 but I can not print with ubuntu 10.04. The computer recognition the printer and it say printer ready to print but then it does not print. What can I do?
my epson printer on my system consists of: ASUS A8N32-SLI DELUXE. THE printer CX8400 using usb port does not print it, only spools out paper with suse 11.1
