General :: Can't Print Pdf Files From The Ubuntu PDF Viewer On Printer
Aug 6, 2010
I can't print pdf files from the Ubuntu PDF viweer on my printer - I get a message that 'pdftorasterfailed'. My workaround is to print to file then print the postscript file. Annoying but it works. I did some searching and this is a known bug in cups for Ubuntu 10.04. The first thing I tried was a system update, that did update cups but it still fails. I found this link:
[URL]
and have the patch files, but how do I apply them?
View 8 Replies
ADVERTISEMENT
Jan 26, 2010
I cannot print pdf files. I click print in evince everything seems ok but nothing comes out on the printer. I receive no error. I have a HP printer (LasterJet 3005n) attached over a network. I am running 9.10 on a Dell Optiplex. I did not have this problem in 9.04. I had this problem immediately after I did a fresh install of 9.10. I can print open office documents without any problem, just not pdfs. I have the same problem with my serval laptop (also running 9.10).
View 8 Replies
View Related
Jan 12, 2010
My Ubuntu Karmic install has a very useful Print-to-File Printer configured which allows me to generate Postscript and PDF files.
I have Windows XP running on Virtualbox and I want to be able to generate PDF files using this printer but there appear to be no Printers configured.
View 1 Replies
View Related
Dec 26, 2010
My wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?
View 5 Replies
View Related
Jan 7, 2010
I'm new to Linux and Ubuntu, but have started migrating as I like what I see. However, I found a problem with Document Viewer. After downloading and viewing a PDF, when I try to print either the current page or a page range, it insists on printing the full document. I could not find this bug documented anywhere. I'm using Ubuntu 9.10 with the latest fixes etc.
View 2 Replies
View Related
Aug 23, 2010
I have just got some new sheet music; and I was wondering why it takes so long to print from Document viewer. I have a lexmark optra e312 which is connected to a windows network, and other programs seem to work just fine, but this one prints slowly whenever I:connect it to my computer directlyreinstall the printerreinstall ubuntu, even to other variantsMaybe someone could suggest another document viewer? I need to view .pdf, .ps, and .djvu as well as a few others if possible
View 4 Replies
View Related
May 1, 2011
Though I have to deal with a lot of new issues with respect to 11.04, I have a specific problem that I need to solve quickly. When I try to print to a pdf-file from a ps-file using Document Viewer, it appears a box that says:
"Failed to print document
Printing is not supported on this printer."
View 1 Replies
View Related
Jun 3, 2010
Document viewer 2.30.1 in fedora 13 does not print pdfs properly. Xpdf is working. I printed the same pdf with document viewer 2.28.2 in fedora 12 without any problems.
View 3 Replies
View Related
Jan 3, 2010
Ubuntu 9.10 54 bit
XSane 0.996
Document Viewer 2.28.1
Brother MFC 240c multi function scanner, printer, fax
So I am cleaning up some old paper records from 2009. I scanned about 25 pages of old medical receipts, prescription receipts etc. as a multi page project. The destination was a pdf file. The desired file is created and I can open it in the default Document Viewer. When I try to print to my Brother HL5170DN laser printer (just one page as a test) I get a message in the print queue window:
Processing Printer warning
com.apple.print.recoverable
and the job never prints. I can print pdf files from other sources such a printing a web page to a file/pdf, pdf files downloaded or created on other computers etc.
If I print the pdf created by XSane and viewed in Document Viewer to the MFC 240c ink jet printer, the pages are about 3/4 size, not the full size pages I scanned.
I am forced to do my scanning and pdf writing on an XP virtual machine running on the Ubuntu box under VMWare
View 5 Replies
View Related
Oct 27, 2010
I've tried to copy different tutorials so that I can put on paper everything prints except the important things(commands & script examples. Is this some kind of copy-right? If not issue with copy-right is it possible to have complete copy. Also I haven't seen in PDF form, I just need to copy so I can reference without having to be on computer.
View 4 Replies
View Related
Feb 5, 2010
I have an old desktop that I'm trying to set up as a home backup/print server. Backup was trivial, but am having issues getting the printing to work. The printer is connected to the server running Ubuntu Server 9.10 (no gui). If I access the printer via http://hostname:631/printers/, I am able to print a test page, so I know the printer is working; however, I am having no luck from Windows. Windows can see the printer when browsed via hostname, but I am unable to connect. Windows says "Windows cannot connect to the printer" without indicating why.
From /etc/samba/smb.conf:
[global]
workgroup = WORKGROUP
dns proxy = no
security = user
[Code]...
View 5 Replies
View Related
Oct 14, 2010
I have a laptop running Ubuntu 10.04 and my basement computer running Windows 7. I want to be able to access files on on both computers from either. I also want to be able to print from my laptop to the printer attached to the basement computer. I finally got printing working. Then I tackled the filesharing. I finally get filesharing working and now, I can't get printing working again, even though I've gone back to the version of smb.conf that I had when I was able to print. So here is what I've got.
<->testparm
Testparm results.txt
<-> Printer State
When I look at my printer properties in Ubuntu I see the status: Idle - Unable to connect to CIFS host after (tried 3 times) Cups Error Log When I look at the Printer Error Log, I see: (partial) Printer log extract.txt I can ping the IP address of the windows box 192.168.0.5, but when I try to ping the name owner-pc it fails. This would lead me to beleive that the there is a name resolution problem.
View 1 Replies
View Related
May 1, 2010
Can CUPS print to a color printer? And also do I need a GUI running on my computer in order for CUPS to work?
View 1 Replies
View Related
Feb 15, 2010
I'm trying to get GS to print to network Windows printer, but somehow fail to do so . I managed to print through CUPS to that printer but if I use GS with -sDEVICE=cups nothing happens, nothing is printed, CUPS logs remain unchanged... I also found command using smbclient (gs ... | smbclient //machine/printer -U user ... -c 'printmode graphics;print-') but that one fails with "session setup failed: NT_STATUS_REQUEST_NOT_ACCEPTED" Here is why I need it, so maybe you know better way: We need to print thousands of PDF files in one print job (to prevent anybody else to send something else in while we are printing this). I was trying to develop small C program using GS API to achieve this but somehow I fail on something as trivial as print something on shared network printer.
View 3 Replies
View Related
Dec 20, 2010
Failed to print to HP printer from Ubuntu 10.10.. i get error - {'printer-state-message': u'/usr/lib/cups/filter/foomatic-rip failed', 'printer-state-reasons': [u'none']}
View 1 Replies
View Related
Jul 24, 2011
I got a hp 3050J610 wireless all in one and hooked it up to my wireless network
and it works fine from windows vista from my hp notebook. I also run puppy 5.1
off a pen drive which runs fine on the laptop. Puppy sees my network fine and
goes on the internet from my satalite modem over the wireless network no problems.
I installed the wireless printer to puppy with the cups wizard without any errors or problems. Cups found the printer and correct ip address no problem. I used the 610c driver from the cups menu which I assume is the right one. I can't seem to find another one. It lists the printer and lists the right ip address. when I try to print it shows it is printing the print job but nothing happens at the printer. I look in the print manager and it shows the print job was done. I can ping the ip address and get a responce.
View 3 Replies
View Related
Oct 25, 2010
I have a mail-account, which is checked every 10. Minute for new mails (via getmail), printed(via cups/lpr) and the file is deleted if successful.
My problem is that I dont want to print the texthtml, but what it looks like when rendered.
What is the best way of doing this ? html2ps or ?
Is it also possible to print the attachments( PDF) inside the mail, this way ?
View 3 Replies
View Related
Jul 15, 2011
Our one remaining problem seems to be printing. She has an HP OfficeJet 6500 USB printer. We have the computer conntected. Strangely, when I boot from the CD the printer shows up as installed even though I did nothing to install it. After having submitted a print job it shows the printer status as "idle" and the print queue is empty. I tried deleting that printer and re-installing. The installation went as one would expect. However the results are the same. I'm beginning to think that somehow the problem is related to the fact that we are operating from the live CD. getting this thing to print from the live CD.
View 9 Replies
View Related
Jun 5, 2010
i have custom programs written in Basis pro5. Standard output to a pdf virtual printer works fine. Using pdftk to overlay on to a form is hit or miss.... There are products out there like Unform that are just too expensive for my company. i have purchased another product from a company that prints the forms to the laser perfectly but i am incapable of capturing them and saving them as pdf's for archiving/emailing/faxing and i don't much care for this company.
View 2 Replies
View Related
Jun 5, 2011
I cannot print pdf files. I have tried using okular and xpdf. The documents display in the program, but print preview shows a blank page. The printer then sends out blank pages. I have tried printing on 2 different printers using usb cables. Using terminal to process the commands shows error:
Quote:
xxx@xxx:~$ xpdf
***** MediaBox = ll:0,0 ur:611.976,791.968
***** CropBox = ll:0,0 ur:611.976,791.968
***** Rotate = 0
Segmentation fault
Converting to .ps also is blank.
View 6 Replies
View Related
May 18, 2010
I have 2 desktop PC's both running 10.4, both connect to internet thro a wireless router. One PC has a printer attached and I would like to be able to print from the PC without the printer attached, what is the easiest way to achieve this?
View 1 Replies
View Related
Sep 24, 2010
I've tried lpr [FILE] didn't work I've tried cat [FILE] > /dev/lp0 couldn't figure out how to get to the root prompt and I googled until my googler was sore. All I got was lengthy and confusing user manuals for cat. besides going through the trouble of loading GIMP everytime I want to print something?
View 4 Replies
View Related
Nov 9, 2010
I've looked at all the threads that I can find on the HP Deskjet D1660. I am unable to print. I've also tried to manually install the hplip files with no help. The only thing that I can find says to use a driver 3.10.2 but all I can find is 3.10.6 and 3.10.6.15. But non of this is working. XP prints fine but I want Ubuntu to work fine too. This is why I bought this printer in the first place.
I am running Ubuntu 10.10 on an emachine with a celeron micro processor and it has 2 gig memory. I have tried the usb cable in every usb slot available and ever thing else. When I go go print a job the hp panel shows that job is sent to printer and that the printer is printing it. Unfortunately it never get printed. I have tried even removing cups and hplip using synaptic and reinstalling them but no help.
View 6 Replies
View Related
Apr 10, 2011
I have recently bought a printer hp deskjet d1663 but I can not print with ubuntu 10.04. The computer recognition the printer and it say printer ready to print but then it does not print. What can I do?
View 9 Replies
View Related
Oct 20, 2009
I want to configure file printer (print to file) on my rhel-5 machine in such a way that if users fire print command from windows xp it should create an individual computer wise txt file on my linux machine. File name should be different for each printer.
View 2 Replies
View Related
Jan 1, 2010
I am running ubuntu 9.04 and am having trouble printing. My Brother DCP 330c printer is detected however I have to manually chose a printer driver all of which do not work with the printer. I have tried downloading a printer driver from the brother website and tried to install it.
View 2 Replies
View Related
Mar 15, 2010
I am trying to print to a network printer from my 9.10 install. The printer is Canon_MF4360-4390, when browsing for printers, cups finds it immediately. I found drivers for this printer online (driver is called UFR_II_Printer_Driver_for_Linux_V200_uk_EN). The drivers installed without any problems.
I can go through cups and add the printer successfully. I can even print a test page that shows up in the queue as completed. However, nothing comes out of the printer. Also, there is nothing in /var/log/cups/error_log to show that an error has occurred.[URL]..
View 3 Replies
View Related
Sep 6, 2010
The printer is connected to a networked XP machine that is accessible from Ubuntu.
I have set up the printer as instructed in this help file...
https://help.ubuntu.com/community/WindowsXPPrinter
SAMBA sees the printer on the network , verifies the printer and the driver loads.
Everything goes along just fine until "print test page" No go.
The printer shows up in the "Printing -local host" window.
Under "printer properties" the "Make and Model"are showing the correct device in the correct location.
The "Printer State" shows "idle - /usr/lib/cups/filter/foomatic-rip failed"
Is there something I might have missed in the set-up?
View 9 Replies
View Related
May 19, 2011
I have an HP deskjet f4580 and I downloaded hplip and the printer prints when its plugged into the usb but not wirelessly. And I noticed an hp setup adhoc on my network connections but I couldnt get on it. I'm nearly certain its something I am missing just don't know what..? and I have Ubuntu 11.04
View 9 Replies
View Related
Feb 17, 2011
My question is that i have a laptop with windows vista on it and my main box ubuntu 10.04.
I know there is a way to set up the printer on the vista laptop to print through my box.
I remember part of it, something like :640/my printers/linux printer/hp?
Also how do i set up the linux box to allow the vista machine see the printer?
View 1 Replies
View Related
