I am using Ubuntu 9.04, I want to connect my Reliance ZTE cdma modem in ubuntu,could anyone give the steps in detail. i have run the following commands in the terminal and pasted the result for each command
sudo lshw -C network
lspci -nn
lsusb
[code]...
I tried connecting my reliance netconnect usb modem using mobile broadband in network connection but its unsuccessfull inspite of proper configuration.
View 9 Replies View RelatedI tried connecting my reliance netconnect usb modem using mobile broadband in network connection but its unsuccessfull inspite of proper configuration..
View 4 Replies View RelatedHere is a method for connect usb modem in linux system.
I've created step by step process to configure the TATA/Reliance modem over linux..Pls go thru the link
I used this method to configure TATA photon+ but I hope similar way will also work for Reliance NetConnect Brodband+
Huwaie/ZTE Modem
Command Mode:
1) Check your NetworkManager rpm for Correct Installation
2) Set SELinux in permissive mode and switch to ROOT user or you can also use sudo..
3) If wvdial is not installed already, you've to install it from Fedora Repository. yum install wvdial
4) Run below command, it will detect your modem....wvdialconf /etc/wvdial.conf
If this command can't detect your modem then try below commands
i) lsusb -v grep -i iManufacturer The above command will help you to know the manufacturer of you modem and to get its vendorId and productionid.
ii) lsusb -v From above command search the vendor id and product id your of modem and execute the below command
iii) modprobe usbserial vendor=XXXXXX product=XXXXXX This command will load your modem
Now run the command given in step 4.
5) Now open /etc/wvdial.conf file in your favourite editor. I used vim for this purpose.
vim /etc/wvdial.conf
Change your username and password with internet/internet. Save and exit.
6) Now try below command..
wvdial
7) Open /etc/resolv.conf or execute below command
You can also add some global DNS echo "nameserver 4.2.2.2" >> /etc/resolv.conf
8) try to ping any site
If you get the response then you are all set for the modem, ENJOY SURFING with high Speed
GUI Mode:
Right Click on the Netowk icon on your status bar
NetowkManager > Mobile Brodband > Add
Simply follow the instructions given in GUI and setup your modem
Then Left Click on NetworkManager ICON on status bar and choose your connection and connect,
If you face any problem then set SELinux ini permissive mode and then try.
I tested the GUI method for huawei modem but, for ZTE modem, it doesn't work, Please let me know if it works for you..
i can't connect the internet using Skytech CDMA USB modem in my ubunntu 10.10 (Super OS) i follow the instruction in this thread url.
1. Boot w/ out device,
2. connect the device,
3. open the terminal and type..
GC224PA-UUF:~$ usb-devices
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
code....
I think I have configured GLink usb modem so far. But when I run wvdial command, I got the following. But I can not browse the internet. Other problem is when I try to use Gnome PPP dialer, it could not connect. Modem type is listed as ttyS0 and so on while I have setting in wvdial.conf ttyUSB0 so it does not support.
chitra@chitra:~$ sudo wvdial
[sudo] password for chitra:
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATE0
--> Sending: ATQ0
OK
--> Re-Sending: ATE0
OK
--> Cannot get information for serial port .....
--> Initializing modem.
English :I'm a newbie please help me??? How to connect Modem GSM(3g-hsdpa) / CDMA in Ubuntu??
Indonesia : Aku newbie, tolong bantu saya??? Bagaimana mengkoneksikan GSM Modem (3g-HSDPA) / CDMA di Ubuntu?
Modem : Option Icon322 / GlobeTrotter Icon322
cdma usb modem recognized on as mass storage device.nstalled wvdialler and made appropriate lines to conf file and still does not work.
View 5 Replies View Relatedis there anyway that i can install my reliance netconnect lxu800 modem graphically(GUI). i am not well versed with command line interface. i just downloaded ubuntu desktop version and installed it alongside windows vista.
View 2 Replies View RelatedI've Reliance Broadband internet modem . very first time only it was connected but next onwards it's not connecting , I am trying last one month to connect internet , I am tired .I had seen lot of thread related to this problem but it's not connecting, my device is identified by network manager and i entered user name and password ,connecting process is going on but finally it's not connecting . i installed wv dial and usb modeswith data
View 3 Replies View RelatedSince few days I am trying to install my Reliance Netconnect Boradband ZTE AC8710 in ubuntu 8.04.i did similar things.in lsusb it showing usb device
root@rspatani-desktop:/dev# lsusb
Bus 004 Device 002: ID 03f0:4917 Hewlett-Packard
Bus 004 Device 001: ID 0000:0000
[code]...
Got this modem and now i'm struggling to get it working.Device: Pantech UM 175 (CDMA Wireless Broadband Modem) Driver: cdc_acm *Modem requires custom startup key
Code:
AT+CRM=1
Error: I get online for maximum 10 seconds, then i get disconnected and can't restart connection until i either replug the modem or disable mobile broadband conncetions via NetworkManager
What I've tried: google reconfigure modem use windows manual All the guides found on google are outdated SuSE version: 11.3 uname -a
Code:
Linux Gendalph.mhome 2.6.34.7-0.4-deskto #1 SMP PREEMPT 2010-10-07 19:07:51 +02 00 i686 i 686 i386 GNU/Linux
lsusb
Code:
Bus 002 Device 002: ID 106c:3714 Curitel Communications, Inc.
Logs:
dmesg
Code:
[ 314.420141] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 314.567174] usb 2-1: New USB device found, idVendor=106c, idProduct=3714
[ 314.567192] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 314.567204] usb 2-1: Product: PANTECH USB MODEM
[code]....
I have a ZTE CDMA 1x Modem (Reliance Netconnect). The modem has a USB interface and it works as a PLUG-&-PLAY device on windows (and has a Flash Storage too for driver information for windows.) I am unable to find my modem on Linux machine so that i can use wvdial for getting connected to internet on my linux machine. This the dmesg output for my modem.
[Code].....
I am able to set up this modem on Ubuntu and Fedora but cannot get it to work on Slackware. I have tried many configurations, all with no success.
View 5 Replies View RelatedI have ubuntu 11.04 in my netbook and when I inserted reliance netconnect broadband usb modem,it automatically detected and after giving the necessary details it was connected..But I am not able to access any websites..On googling I found that I have to make changes to /etc/resolv.conf..But resolv.conf file is missing.
View 9 Replies View RelatedI have fedora 14 and reliance netconnect Huawei EC325 modem. I am not enable to configure it. How to configure the modem by providing step-by-step instruction
View 1 Replies View RelatedI'm using a 'ice.net' D-50 (CDMA EV-DO rev A) mobile broadband USB modem, also sold as Cmotech CNU-680 in other areas. The modem is connected to a USB port on a hp8710w mobile workstation.
As the 11.2 Gnome Network Manager won't connect this modem to Internet (see my first post here), I have downloaded and installed a 'D50 Modem Manager program' from [url]
After unpacking and installing this cmotech-qtmodem-1.6-1.i586.rpm package for suse on 11.2 x86_64, the gui application 'D-50 Modem Manager' is found in the Internet Group.
However, neither this program does connect the D-50 modem really on 11.2 x86_64 (as it did on 11.1 x86_64). Tried both traditional network setup and with Network Manager.
Any idea and suggestion how to trobleshoot this further? I think I've seen that a newer version cmotech-qtmodem 1.9 has been mentioned on the web, but without being able to find and download this version.
Command output as follows:
As normal user:
On the Modem Manager gui: D-50 modem is ready
From Login script Debug window:
As root:
It seemed like the modem connected, but Firefox was not able to connect afterwards (Server not found)
I am unable to install a ZTE AC8710 CDMA Hi Speed Modem on Fedora 10.I have somehow found the Linux Drivers but am unable to compile them as I do not have the required Kernel Headers which I can't download in Linux because my Internet is not working.I have tried the entire process of trying to add the Device ID and setting up xvdial but I am unable to find the ttyUSB or USBtty or USBacm in /dev.
View 7 Replies View RelatedI use ubuntu on my laptop..and i use reliance net connect data card for accessing the internet..
is there any way by which i can share the reliance netconnect internet connection to another pc to which i am connected through lan?
that pc uses microsoft windows xp..
so that whenever i use my reliance netconnect..that pc connects to me through lan..and is able to use the internet connection as well..
i have satanic ubuntu 8. i was trying to connect to my reliance netconnect broadband+ via the following method. the process failed. its a usb broadband dongle thing.
Code:
theunknowndoor@theunknowndoor:~$ SU
bash: SU: command not found
theunknowndoor@theunknowndoor:~$ su
Password:
su: Authentication failure
[Code]...
i am beginner to this field of ubuntu(linux)...last week i have installed ubuntu 11.04...alongside windows xp...but i couldnt configure my net connection...i am using reliance LG LXU800 modem(cdma)intially it was working after using this commansudo modprobe usbserial version=0xeab product=0x9357that time my linux version is 2.6.38.7but now it gives fatal error and it isFATAL: Error inserting usbserial (/lib/modules/2.6.38-8-generic/kernel/drivers/usb/serial/usbserial.ko): Unknown symbol in module, or unknown parameter (see dmesg)
View 5 Replies View RelatedI have installed ubuntu 32 bit version on my HCL netbook. I use reliance netconnect (Huwai EC 1260 or 168c). I have configured it and it works well. But the only problem is that I have to connect the netconnect device before booting. If I connect it when its ON, the networkmanager does not connect automatically. even on the right on the tray icon, enable mobile broadband option is not there.
View 2 Replies View Relatedjust finished installing Ubuntu to my dell mini 10v netbook. I really like it so far but I have hit a problem that may be a potential deal breaker. I have a CDMA HTC Hero phone that I have rooted. I installed the "wireless tether for root users" app on my phone and use it ALL the time to go online on my netbook through my phone on windows. However Ubuntu 9.10 does not seem to connect to my phone running this app. It sees the SSID, and i tell it to connect, and then I just get that circle thing for a couple of minutes then it gives up and connects to my main router if its in range.
View 3 Replies View RelatedHow to connect huawel ETS2252+ Cdma phone to Fedora 12
View 1 Replies View RelatedI'm using ubuntu karmic and I'm not able to connect to the internet with my reliance netconnect data card using network manager. Other distros like fedora, opensuse n sabayon connected easily with nm. Ubuntu detects the data card flawlessly but just doesnt connect.This problem has been persistent even in previous ubuntu versions, n I used to use wvdial. But downloading wvdial on some other comp with every dependency is really cumbersome.
View 6 Replies View Relatedi'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
how to connect 3g modem with ubuntu 10.04
View 1 Replies View RelatedI've tried setting usb_modeswitch wvdial etc .. modem has been detected as a modem fff1 but still could not connect to the internet ... I try to use the network connection settings still can not ..so what should I do?
View 2 Replies View RelatedCan I connect my Linux PC to the Internet with a Nokia E71? I've looked for answers elsewhere but everything I've found refers to file synchronization, sending SMSs, playing with the address book, etc. I just want the Internet!
View 1 Replies View Relatedi try to connect vodafone usb modem on it but m unable to connect
View 1 Replies View Related
