Slackware :: Novatel USB760 CDMA Modem On 64-13.1?
Dec 29, 2010I am able to set up this modem on Ubuntu and Fedora but cannot get it to work on Slackware. I have tried many configurations, all with no success.
View 5 Replies
ADVERTISEMENT
Networking :: Dealing With The Novatel USB760 Internal CD
Apr 18, 2011I am using Ubuntu 10.04 and trying to get a Novatel USB760 to work. Initially,it is detected as a CD rather than a modem. So, I wrote a udev rule to eject it and that worked, but sometimes the CD comes back and remounts itself and then kicks the modem off and the connection dies. I tried various ways to fix this, but no luck. Finally, I just deleted all the cd files in the /etc/udev/rules.d and the /lib/udev/rules.d (if you don't delete these, udev recreates the files in /etc/udev/rules.d). That does work and now the cd reports hardware errors and does not mount and the modem works as it should.
Now, this works on the device that does not and never will have a CD or DVD attached to it, but on my laptop I don't want to do that as I would not have access to my DVD drive. Does anyone know of a way to make the udev rules ignore specific hardware and not try to create mounts or symbolic links for those devices. Ideally, I would like to blacklist the novatel CD part and not the modem, but I am unsure how or if this is possible.
Hardware :: System Does Not Detect My Modem Novatel Wireless / What To Do?
May 15, 2011I use modem novatel wireless ovation mc935d. when i try to use lsusb, my modem is detected. but when in network configuration manager is'not detected.
View 2 Replies View RelatedUbuntu Networking :: Install Sprint Mobile Broadband Novatel 3G Wireless Usb Modem?
May 7, 2010How do I installed a sprint novatel 3g modem? I see sprint under the mobile broadband tab when I create a new connection, and it shows all the right information, but I never can connect.
View 1 Replies View RelatedOpenSUSE Wireless :: Configuring OpenSuse To Work With Verizon USB760 Modem?
Jul 8, 2009I just purchased a Verizon USB 760 Modem.I purchased the Modem from Verizon because their web site stated that it supported all major OS including Linux.
My system specs are: HP Compaq 6715b Laptop
OS Information
OS: Linux 2.6.25.20-0.4-default i686
Current user: jraglin@Jada
System: openSUSE 11.0 (i586)
[Code]...
OpenSUSE Wireless :: CDMA Modem Pantech UM 175 On 11.3?
Oct 17, 2010Got this modem and now i'm struggling to get it working.Device: Pantech UM 175 (CDMA Wireless Broadband Modem) Driver: cdc_acm *Modem requires custom startup key
Code:
AT+CRM=1
Error: I get online for maximum 10 seconds, then i get disconnected and can't restart connection until i either replug the modem or disable mobile broadband conncetions via NetworkManager
What I've tried: google reconfigure modem use windows manual All the guides found on google are outdated SuSE version: 11.3 uname -a
Code:
Linux Gendalph.mhome 2.6.34.7-0.4-deskto #1 SMP PREEMPT 2010-10-07 19:07:51 +02 00 i686 i 686 i386 GNU/Linux
lsusb
Code:
Bus 002 Device 002: ID 106c:3714 Curitel Communications, Inc.
Logs:
dmesg
Code:
[ 314.420141] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 314.567174] usb 2-1: New USB device found, idVendor=106c, idProduct=3714
[ 314.567192] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 314.567204] usb 2-1: Product: PANTECH USB MODEM
[code]....
Networking :: Unable To Find CDMA 1x Modem
May 24, 2010I have a ZTE CDMA 1x Modem (Reliance Netconnect). The modem has a USB interface and it works as a PLUG-&-PLAY device on windows (and has a Flash Storage too for driver information for windows.) I am unable to find my modem on Linux machine so that i can use wvdial for getting connected to internet on my linux machine. This the dmesg output for my modem.
[Code].....
General :: Connect Reliance ZTE CDMA Modem In Ubuntu?
Sep 17, 2009I am using Ubuntu 9.04, I want to connect my Reliance ZTE cdma modem in ubuntu,could anyone give the steps in detail. i have run the following commands in the terminal and pasted the result for each command
sudo lshw -C network
lspci -nn
lsusb
[code]...
Ubuntu Installation :: Could Not Connect The Internet Using Skytech USB CDMA Modem?
Oct 31, 2010i can't connect the internet using Skytech CDMA USB modem in my ubunntu 10.10 (Super OS) i follow the instruction in this thread url.
1. Boot w/ out device,
2. connect the device,
3. open the terminal and type..
GC224PA-UUF:~$ usb-devices
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
code....
Ubuntu Networking :: Glink - CDMA USB Modem Could Connect Internet
Jan 13, 2011I think I have configured GLink usb modem so far. But when I run wvdial command, I got the following. But I can not browse the internet. Other problem is when I try to use Gnome PPP dialer, it could not connect. Modem type is listed as ttyS0 and so on while I have setting in wvdial.conf ttyUSB0 so it does not support.
chitra@chitra:~$ sudo wvdial
[sudo] password for chitra:
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATE0
--> Sending: ATQ0
OK
--> Re-Sending: ATE0
OK
--> Cannot get information for serial port .....
--> Initializing modem.
General :: Usb Cdma Qualcomm Modem Not Working In Ubuntu Natty 11.04?
Jul 19, 2011cdma usb modem recognized on as mass storage device.nstalled wvdialler and made appropriate lines to conf file and still does not work.
View 5 Replies View RelatedOpenSUSE Wireless :: CDMA Mobile Broadband USB Modem Manager Program
Apr 10, 2010I'm using a 'ice.net' D-50 (CDMA EV-DO rev A) mobile broadband USB modem, also sold as Cmotech CNU-680 in other areas. The modem is connected to a USB port on a hp8710w mobile workstation.
As the 11.2 Gnome Network Manager won't connect this modem to Internet (see my first post here), I have downloaded and installed a 'D50 Modem Manager program' from [url]
After unpacking and installing this cmotech-qtmodem-1.6-1.i586.rpm package for suse on 11.2 x86_64, the gui application 'D-50 Modem Manager' is found in the Internet Group.
However, neither this program does connect the D-50 modem really on 11.2 x86_64 (as it did on 11.1 x86_64). Tried both traditional network setup and with Network Manager.
Any idea and suggestion how to trobleshoot this further? I think I've seen that a newer version cmotech-qtmodem 1.9 has been mentioned on the web, but without being able to find and download this version.
Command output as follows:
As normal user:
On the Modem Manager gui: D-50 modem is ready
From Login script Debug window:
As root:
It seemed like the modem connected, but Firefox was not able to connect afterwards (Server not found)
Hardware :: Unable To Install ZTE AC8710 CDMA Hi Speed Modem On Fedora 10 X86?
Mar 22, 2009I am unable to install a ZTE AC8710 CDMA Hi Speed Modem on Fedora 10.I have somehow found the Linux Drivers but am unable to compile them as I do not have the required Kernel Headers which I can't download in Linux because my Internet is not working.I have tried the entire process of trying to add the Device ID and setting up xvdial but I am unable to find the ttyUSB or USBtty or USBacm in /dev.
View 7 Replies View RelatedUbuntu Networking :: How To Connect Modem GSM / CDMA In Ubuntu?
Aug 12, 2010English :I'm a newbie please help me??? How to connect Modem GSM(3g-hsdpa) / CDMA in Ubuntu??
Indonesia : Aku newbie, tolong bantu saya??? Bagaimana mengkoneksikan GSM Modem (3g-HSDPA) / CDMA di Ubuntu?
Modem : Option Icon322 / GlobeTrotter Icon322
Fedora Networking :: Novatel U760 USB Internet Stick?
Sep 5, 2009I am running FC11 and I recently purchased an internet stick from Bell Canada.I have searched/googled and searched again for setup help, to no avail.When, I insert the USB Internet stick, it shows up on my computer as a MMC storage device.FYI, the light on the Stick is green, which would indicate all systems go, but it simply won't connect.
View 3 Replies View RelatedFedora Networking :: Novatel Ovation U720 Native In FC11?
Aug 28, 2009Finally, my mobile broadband is native to Fedora. Just finished clean install of FC11 and it found the device, started it, and it works, just like it did in WIndows. ZeroConfig FTW! Great job Fedora team on this. FC10 it didn't work at all and FC6, 7, and 8 it took a lot of tinkering to make it fully functional.Also, NM is working MUCH better now with static IPs over the previous FC10 version. Set it up first run and had no issues with running my laptop on the network.
View 6 Replies View RelatedUbuntu Networking :: Auto Dial Kppp And Novatel 760 Broadband?
Mar 31, 2011I have a Novatel 760 broadband USB device and I use kppp to connect though it is extremely slow (ping takes 100ms). What I need is a way to make kppp connect on reboot without any interaction from the user. I have looked on the Internet, but I did not find anything useful. I am using kppp because I could not get gnome-ppp to connect and it does not seem to have the features of kppp.
View 1 Replies View RelatedNetworking :: Can't Get Slackware Online With New Modem
Apr 5, 2010A couple of months ago, I replaced a broken down modem for my DSL connection. I've learned time and again that Verizon is completely of no help to Linux customers, and so any problems I ever experience, I''m pretty much on my own. These days, I am running no windows whatsoever. Previously, when I got a new modem I would run verizon's windows software to set up the modem for DHCP, and then any distro I chose to run wo0uld connect automatically.
Well, without the ability to run windows, it's a lot more problematic. I have only managed to get some debian-based distros online by running an application called pppoeconf or pppoe-config. No slackware, and since a few months ago I released my own live CD that's based on Slax, this is embarassing and frustrating to say the least. DNS, pppoe, TCP/IP... this is not my thing.
Now I've got Slackware 13 installed, and I've been running netconfig and pppoe-setup, and according to the results I get when I run pppoe-status, I should be online :
And here is where I was supposed to have posted the results of my non-error messsage, but I don't seem to have saved it from the last time I was loggen into slackware. Looks like I'll have to do it again
Slackware :: 3G Modem Not Visible As /dev/ttyUSBX?
Jan 26, 2011I'm currently trying to get my Option 0505 3G modem to work in Slackware 13.1.My Problem is that when I plug the device in no /dev/ttyUSBX appears.I're read quite a few threads as to connect these modems, but none seems to cover my problems.This is my dmesg after plugging in:
PHP Code:
usb 1-1: new high speed USB device using ehci_hcd and address 6
usb 1-1: New USB device found, idVendor=0af0, idProduct=d055
[code]....
Slackware :: Can't Connect Directly Off Modem
Jun 13, 2010When I installed Slackware it configured it by the way I was originally connecting to the internet by. Which was corded to the router. I want to just connect directly to the modem but don't know the steps to make it work correctly.
View 10 Replies View RelatedSlackware :: How To Reset The Modem In Slack
Apr 30, 2010i know that there is a reset button on the back but after reset i dont know what to do with it. right now i m using pppoe connection which only works in windows and bt4 and i want to make it run in slack 'cause now slack is my main os(66hr since i switched to it :0) so i want to configure the modem in a way that i work in slack. and i m dumb about PPP/TCIP/DHCP and btw i like "the" slack
View 7 Replies View RelatedSlackware :: Connect USB Wireless Modem 13.1
Jul 2, 2010I'm using a Verizon/Nortel USB760 wireless modem (worker just fine in 13.0, got problems in 13.1). Using KPPP, I connect to the service, waltz around reading mail, news and LQ then disconnect and close KPPP. I let it sit for any length of time then open KPPP, connect and it can see the modem, attempts to initialize it and it just sits there - I have to unplug the modem and reconnect it to get it going again. /var/log/messages doesn't give any hints (everything looks normal I think) and nothing else does either -- the indicate light on the modem stays green and all that. I've tried ejecting it (nope) and whatever else I can thing of (which ain't much) including reviewing Changes and Hints, READMEs and all.
Is there some setting I may have missed or a USB rule or do I need to poke the thing somehow to get it going? USB-Modeswitch automagically figures out what the device is and does its settings (so there's no "conf" file any more - unless I really missed something there).
Hardware :: Cannot Detect Modem - USB Cable - In Slackware 13.1
Dec 4, 2010I installed slackware 13.1 a couple of days ago. I am a complete linux newbie..I am able to connect to internet from windows using the USB cable of my modem..but this modem is not detected in linux..is there any option to make linux detect it?
I have a pentium 3, 1 GHz processor 256 RAM..and the info below i got from my terminal..
lsusb output
Code:
Code:
And here is some information about my modem
Code:
Features:
-Complies with IEEE 802.3, IEEE 802.3u standards
-One 10/100Mbps auto-negotiation RJ45 port supporting auto MDI/MDIX, 1 RJ11 port, 1 USB port
-Built-in firewall
-Compatible with major ISP lines
-Fast internet access
-Supports bridge and NAT router mode
-Complies with ADSL protocols (ADSL/ADSL2/ADSL2+)
-Easy configuration
-Quick response semi-conductive surge protect circuit, provides reliable ESD and surge-protect function
-Supports firmware upgrade
-Built-in DHCP server
Slackware :: Vwdialconf Finds The Nokia And And Recognize It As A Modem?
Mar 9, 2010i have the huawei 1550 3g modem (prepaid) tele2 and a nokia 5800 both working on on other dists,installed vwdial and vwdialconf finds the nokia and and recognize it as a modem.vwdial connects and hang up kppp same story. what is the deal with the phone? i have all the settings right it should really just work. And the usbmodem it seems like i need usb_modeswitch but i cant compile i properly and the slackbuild is broken/old.
View 13 Replies View RelatedSlackware :: DSL Modem Firmware Is Not Loaded After Kernel Upgrade
May 24, 2010I have a zyxel dsl (usb) moden, which needs a firmware portion to work, called cxacru-fw.bin.
I have been using this modem using with at least two different slackware distributions, even when the atm drivers were not included in the kernel.
Presently I am using slackware 13.0, with the vmlinuz-huge-smp-2.6.29.6-smp kernel.
I downlowded the 2.6.34 kernel, because I need it for a new webcam, compiled and installed it, and oops! the modem does not work anymore.
I am pretty sure I have configured the kernel correctly; dmesg tells me the modem is recognized by the kernel, as it is with the previous one, but the firmware is not loaded, because the DSL led remains off.
I attach the kernel configuration lines:
I have tried forcing the kernel to load the firmware, using but it didn't work either.
Slackware :: Huawei E160 3g Modem - Can't Get An Access To The Internet
May 24, 2010I installed today Slackware64-current on my laptop, but I can't get working internet connection. I have installed wvstreams 4.61 and wvdial 1.61, configured it right, it gets an IP address and connection but I can't get an access to the internet.
[Code]....
Slackware :: Losing Hardware Clock Time While Using Wvdial On Usb Modem / Fix It?
Jul 21, 2011Now that I'm able to connect to Internet via my MC760 wireless modem on /dev/ttyUSB0, I am losing time!
I have lost 5 minutes while online for 1/2 hr.
Yes ntpd is running. What is strange is that right now, I'm in town at coffee shop and using wireless. I'm not losing time at all. This isn't the first time I've noticed the loss of time. It's been happening every since I was able to connect with the usb modem. I just had to come to town and use wireless to see if the problem existed while on wireless (b43). While being connected via the MC760, I've also noticed that the cpu temp rises and the fan runs quite a bit more than when not connected via the MC760. Here is the top portion of output of "top" code...
Slackware :: Will Dell 1558 Internal UMTS Modem Work Straight After 13.37 Install
May 15, 2011I am currently running slackware 13.37 in virtualbox on my Dell 1558. I would really like to install it for real to my HDD to get the speed benefit. My only way to connect to the internet is via my internal Dell UMTS modem. Will this work after the install or do I need to take some precautions before the time and download the right apps files now while I have access?
View 3 Replies View RelatedFedora Installation :: Can't Use CDMA 1x Mobile Broadband?
Jun 30, 2009I tried at Fedora 10, didn't work, and then Ubuntu 9.0.4, in the hope of it may work, my CDMA 1x Mobile broadband.( it works well under Win XP). and it didn't work.And then it comes the Fedora 11, still the same problem.
Seems Linux cannot recoginize my CMDA 1x Mobile Bbroadband, becuase the newwork manager doesn't pop up with messages of detecting a new hardware.
And when I run the desmeg:
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29.4-167.fc11.i686.PAE ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
[Code]...
Fedora :: Send And Receive SMS Via CDMA Connection
Jan 3, 2011How I can send and receive SMS via CDMA Connection. I have tried Gammu (hangs) and Gnome-Phone-Manager (Can't run on GTK3). Gnokii? Well ... I'd like to hear from someone who has succeeded with it on F14. I don't like having to boot into Windows to check my Phone Credits
View 11 Replies View Related