Fedora Hardware :: Config Huawei EC325 Reliance Modem?
May 10, 2011I have fedora 14 and reliance netconnect Huawei EC325 modem. I am not enable to configure it. How to configure the modem by providing step-by-step instruction
View 1 Replies
ADVERTISEMENT
Debian :: USB Huawei Ec1262 Wireless Internet Stick From Reliance
Aug 28, 2010I have a USB huawei ec1262 wireless internet stick from Reliance. I google'd on how to install it. I am using Debian Lenny. I know that there is a "mode-switch" package that needs to be installed but this is not available on the down load package list for Debian. i can find this & also instructions if possible on how to get this working on my Lenny system .
View 5 Replies View RelatedOpenSUSE Hardware :: What Include Support A Driver For USB Modem Huawei E219 (HSDPA/UMTS) And Huawei EC226 (3G/EVDO)
Dec 23, 2009What include support a driver for USB modem Huawei E219 (HSDPA/UMTS) and Huawei EC226 (3G/EVDO)?
View 1 Replies View RelatedFedora :: Huawei 3g Modem E153 On F14 ?
Apr 5, 2011How can I get Huawei 3g modem E153 connects on F14 ? I've tried settings in network manager applet to set it with no success.
View 3 Replies View RelatedUbuntu :: Installing Modem Huawei - Modem Can't Get Connected And Suddenly Remove From PC
Jun 10, 2010with installing Modem Huawei E170. my modem can not connected and suddenly remove from my PC. i am using Ubuntu LTS 10.04.
View 1 Replies View RelatedFedora :: Configuring The Huawei E220 Modem?
Aug 23, 2009I want to configure the Huawei E220 modem I recently bought in Fedora 10. I read lot of detail documents in the internet. All were interesting and explaining the wvdial.conf file. The problem I have is that, the file asks for the phone # to dial, username & a password. I don't have these information since my ISP didn't provide those. It works perfectly in Windows, in which above information are not needed, because when plugged in Windows, a software installation launches, which does the job to connect to the internet. So, is there a way to configure the modem to connect to the internet without those information. Because my ISP refuses to provide those, when I called there customer services.
View 3 Replies View RelatedUbuntu Networking :: Huawei E1552 Modem To Connect To The Internet, Everything Was Going Well When Suddenly Modem Stopped Working?
Feb 8, 2010i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
Ubuntu :: Reliance Modem Not Connecting
Jun 15, 2011I've Reliance Broadband internet modem . very first time only it was connected but next onwards it's not connecting , I am trying last one month to connect internet , I am tired .I had seen lot of thread related to this problem but it's not connecting, my device is identified by network manager and i entered user name and password ,connecting process is going on but finally it's not connecting . i installed wv dial and usb modeswith data
View 3 Replies View RelatedFedora Networking :: 11 - Huawei E169 USB Modem Not Recognized
Nov 26, 2009I am trying to get a Vodafone USB modem to work - Huawei K3765 (which is a rebranded E169). It's supposed to be recognized by the kernel and just added through Network Manager, but - no luck. I also installed vodafone-mobile connect from here: [URL] (as well as the other packages). What happens when I start it - it doesn't see the modem. It's seen as a CD drive, and clicking "eject", "unmount" or "remove safely" on it doesn't help - it disappears, then several seconds later appears as a CD drive again.
View 14 Replies View RelatedGeneral :: Connect Tata And Reliance Boradband Modem
Mar 23, 2010Here is a method for connect usb modem in linux system.
I've created step by step process to configure the TATA/Reliance modem over linux..Pls go thru the link
I used this method to configure TATA photon+ but I hope similar way will also work for Reliance NetConnect Brodband+
Huwaie/ZTE Modem
Command Mode:
1) Check your NetworkManager rpm for Correct Installation
2) Set SELinux in permissive mode and switch to ROOT user or you can also use sudo..
3) If wvdial is not installed already, you've to install it from Fedora Repository. yum install wvdial
4) Run below command, it will detect your modem....wvdialconf /etc/wvdial.conf
If this command can't detect your modem then try below commands
i) lsusb -v grep -i iManufacturer The above command will help you to know the manufacturer of you modem and to get its vendorId and productionid.
ii) lsusb -v From above command search the vendor id and product id your of modem and execute the below command
iii) modprobe usbserial vendor=XXXXXX product=XXXXXX This command will load your modem
Now run the command given in step 4.
5) Now open /etc/wvdial.conf file in your favourite editor. I used vim for this purpose.
vim /etc/wvdial.conf
Change your username and password with internet/internet. Save and exit.
6) Now try below command..
wvdial
7) Open /etc/resolv.conf or execute below command
You can also add some global DNS echo "nameserver 4.2.2.2" >> /etc/resolv.conf
8) try to ping any site
If you get the response then you are all set for the modem, ENJOY SURFING with high Speed
GUI Mode:
Right Click on the Netowk icon on your status bar
NetowkManager > Mobile Brodband > Add
Simply follow the instructions given in GUI and setup your modem
Then Left Click on NetworkManager ICON on status bar and choose your connection and connect,
If you face any problem then set SELinux ini permissive mode and then try.
I tested the GUI method for huawei modem but, for ZTE modem, it doesn't work, Please let me know if it works for you..
General :: Connect Reliance ZTE CDMA Modem In Ubuntu?
Sep 17, 2009I am using Ubuntu 9.04, I want to connect my Reliance ZTE cdma modem in ubuntu,could anyone give the steps in detail. i have run the following commands in the terminal and pasted the result for each command
sudo lshw -C network
lspci -nn
lsusb
[code]...
General :: Install Reliance Netconnect Lxu800 Modem Graphically (GUI)
Jan 12, 2011is there anyway that i can install my reliance netconnect lxu800 modem graphically(GUI). i am not well versed with command line interface. i just downloaded ubuntu desktop version and installed it alongside windows vista.
View 2 Replies View RelatedUbuntu :: Reliance Netconnect Broadband Usb Modem With 11.04 - Unable To Access Any Websites
Jul 7, 2011I have ubuntu 11.04 in my netbook and when I inserted reliance netconnect broadband usb modem,it automatically detected and after giving the necessary details it was connected..But I am not able to access any websites..On googling I found that I have to make changes to /etc/resolv.conf..But resolv.conf file is missing.
View 9 Replies View RelatedFedora Networking :: Mobile Broadband FC13 Huawei E173 - Cannot Switch Device To Modem Instead Of Storage With Usb_modswitch
Nov 27, 2010I've been trying to make my FC13 Dell d620 work with a Huawei 3G usb modem mode E173. I can not switch the device to modem instead of storage with usb_modswitch. This is what I get on lsusb:
[Code].....
Ubuntu Networking :: Huawei Modem In 9.10
Mar 22, 2010I moved from Debian to Ubuntu a few months ago, with everything working fine, except my 3G modem (which worked with wvdial and umtsmon in Debian).
The packaging claims that it is a Huawei E160, but lsusb says different: E220 (12d1:1003).
I've followed various instructions from these forums and the wiki, and it seems to be being recognised as a modem (I can set up an O2 prepaid (UK) connection), but it refuses to connect.
Ubuntu :: Sms Software For Huawei Modem?
Jan 29, 2011I use a Huawei modem, a good software / a method to send and read sms from my modem phone number ...
View 2 Replies View RelatedOpenSUSE Network :: Huawei E1550 USB Modem In 11.2?
Mar 17, 2010My machine is running on a dual-boot Windows Vista/openSUSE 11.2 scenario. I have been trying to get my Huawei E1550 to work on Linux for the past few days trying numerous methods suggested in other forums from people with the same problem, but I have not produced any fruitful results.
Plugging in the USB modem results in Linux detecting it as a CD-ROM. I have installed usb_modeswitch in attempt to switch it to a modem, but Linux still fails to recognize it. Windows Device Manager and lsusb both give ProductID=1001 and VendorID=12d1 connected to USB1. I'm guessing since Windows detects the correct IDs, the Linux versions should also be correct. In any case, I ran usb_modeswitch with the Default IDs for /etc/usb_modeswitch.conf, which gave 0x1446 as the ProductID, not 0x1001. Upon running usb_modeswitch, the product ID could not be found so the program fails and quits asking if it's connected (and it is).
Just to test, I also ran wvdial which unsurprisingly did not detect the modem and could not send the init strings. All commands were done using root privileges. Also note that when after usb_modeswitch is run and upon plugging in the USB, NetworkManager pops up near the tray saying "attached" but still shows the device as a CD-ROM.
Ubuntu Networking :: Can Not Use A Wireless Modem Huawei 160
Jan 15, 2010ubuntu I can not use a wireless modem huawei 160.type can only be used in windows.well to be used in my ubuntu linux? whether there is a script that used.
View 2 Replies View RelatedUbuntu Networking :: USB Modem Huawei E180v With 8.04?
Sep 9, 2010Apparently it works with >Ubuntu 9.04, but I need 8.04..I'd had an older modem working on the same system, so its really something to do with this newer ones.
Symptoms:
lsusb shows little, no /dev/ttyUSB* devices
lsusb
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
[code]....
General :: How To Install HUAWEI EG162G Modem
Nov 24, 2010How to install HUAWEI EG162G modem?
View 3 Replies View RelatedOpenSUSE Hardware :: Huawei Usb Modem Not Reconnecting In NetworkManager?
Jul 9, 2011I am running OpenSUSE 11.4 on an HP 625 laptop and uses a Huawei EC1260 USB modem to connect to the internet. The configuration on NetworkManager worked prefect and the there is no problem connecting. The problem is when I disconnect the modem manually, I am unable to reconnect it via NetworkManager. I have to physically unplug the modem and insert it again, then only I can connect to the internet again
View 3 Replies View RelatedOpenSUSE Network :: 11.3 - Cannot Connect Huawei Modem (Keeps Failing)
Oct 5, 2010I am trying to connect my huawei e160 usb modem but it keeps failing and does not show on the Network Manager, checking on /var/log/messages this it what I get:
Oct 5 15:31:30 LPKENBITD002 modem-manager: (ttyUSB1): re-checking support...
Oct 5 15:31:30 LPKENBITD002 modem-manager: (Huawei): (ttyUSB1) deferring support check
Oct 5 15:31:33 LPKENBITD002 modem-manager: (ttyUSB1): re-checking support...
Oct 5 15:31:33 LPKENBITD002 modem-manager: (Huawei): (ttyUSB1) deferring support check
Oct 5 15:31:36 LPKENBITD002 modem-manager: (ttyUSB1): re-checking support...
Oct 5 15:31:36 LPKENBITD002 modem-manager: (Huawei): (ttyUSB1) deferring support check
OpenSUSE Network :: Can't Install Huawei E1752 Usb Modem
Jun 19, 2011I am new to Linux and opensuse is lovely to me . However i have a problem, I dual boot windows and OpenSuse 10.3(because it plays mp3 out of the box) I actually tried newer versions but the problem is that I cant install this Huawei E1752 usb modem. I have failed people. Please help me. I need to use it for internet.
View 1 Replies View RelatedUbuntu Networking :: USB 3G Modem: Huawei E176 Not Working?
Jan 15, 2010This is really weird, and I would like just this question answered: I've spent like 2 hours by plugging, unplugging, rebooting, and doing everything I could, but the modem wasn't working. When I did ls /dev/ttyU* it was showing up a list of 6 usb devices.
Code:
/dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2
/dev/ttyUSB3 /dev/ttyUSB4 /dev/ttyUSB5
And when I sent the command wvdialconf after looking into all the devices, it didn't recognize any modem.
The thing is, that by the time I was writing here for a solution, I disconnected the modem, and when I reconnected it I did a ls /dev/ttyU* just to copypaste the info, and Voil! there were just 2 devices, and wvdialconf worked out just fine! I would like to know what I was doing wrong, so I make sure it won't happen again.
Oh, and I forgot to say: I use Ubuntu 8.04
Ubuntu Networking :: E1550 Huawei Modem Configuration?
Mar 17, 2010how configure E1550 Huawei modem in Ubuntu9.10.
View 1 Replies View RelatedUbuntu Networking :: Huawei E270 USB Modem Not Working
Apr 17, 2010I recently received my Ubuntu 9.10 CD, Kubuntu 9.10CD and Server Edition. I was recommended to do so by a friend because my computer Running on Windows Vista Home Basic with 512MB RAM has been extremely, unbearably slow for the last month or so I got the CD's yesterday and I ran the Ubuntu CD and everything was fine, I rebooted the Computer and it started up! It was great!! Really quick and responsive and easy to use and i LOVE it's features...
My only problem is my Broadband. I live in Ireland and I have my broadband with o2, it's quick and sufficient for my needs. I have a Huawei E270 usb modem (It's wireless broadband). And it wouldn't Work. I plugged it into my pc with Ubuntu up and running and it opened the File for o2 rather than the Interface for it. When I plugged the modem in there was a green lock symbol on the top right of the screen. Is Ubuntu even compatible with the E270 modem?
Ubuntu Installation :: 10.04 - USB Huawei 3 Modem Fails To Be Detected
May 1, 2010I've been trying out the netbook remix of 10.04 but I've been having some issues getting my Huawei modem to work. It detects the install cd and usb storage but it does not discover the modem.
This is the dmesg output after connecting the device:
Code:
> [10540.912126] usb 1-4: new high speed USB device using ehci_hcd and address 9
> [10541.055850] usb 1-4: configuration #1 chosen from 1 choice
> [10541.060834] scsi12 : SCSI emulation for USB Mass Storage devices
> [10541.061799] usb-storage: device found at 9
[Code]....
Ubuntu Networking :: 10.04 LTS With Huawei E169 USB-modem Connection
May 2, 2010Connection is possible only after few reboot. Preferences I tried all.
View 9 Replies View RelatedUbuntu Networking :: Configure BSNL Huawei 3G Modem With 10.04?
Oct 6, 2010how to configure Huawei 3G modem (ec325) in ubuntu 10.04, even i tried with gnome-ppp / wvdial which unable to connect, shows "ppp deamon died" and disconnected at the end of dial.
View 3 Replies View RelatedUbuntu Networking :: Connect To The Net With A Huawei E173 USB Modem
Nov 4, 2010I am having desperate problems trying to connect to the net with a Huawei E173 USB modem. I was using Linux Mint 7 which I upgraded to version 9 today to see if that would fix the problem but it made no difference. Basically it seems the only time I can connect to the net in linux is if I use the modem in windows and then restart straight into linux, in that case it sometimes gets recognised and works. So at least I know it can work.
I've been trying loads of stuff like usb_modeswitch I found on the net but none of it has worked. Here is what ls-usb gives me -
[Code]....
I am unable to get any work done without the net and I will not have access to a wired connection til the new year.