General :: Connect Tata And Reliance Boradband Modem
Mar 23, 2010
Here is a method for connect usb modem in linux system.
I've created step by step process to configure the TATA/Reliance modem over linux..Pls go thru the link
I used this method to configure TATA photon+ but I hope similar way will also work for Reliance NetConnect Brodband+
Huwaie/ZTE Modem
Command Mode:
1) Check your NetworkManager rpm for Correct Installation
2) Set SELinux in permissive mode and switch to ROOT user or you can also use sudo..
3) If wvdial is not installed already, you've to install it from Fedora Repository. yum install wvdial
4) Run below command, it will detect your modem....wvdialconf /etc/wvdial.conf
If this command can't detect your modem then try below commands
i) lsusb -v grep -i iManufacturer The above command will help you to know the manufacturer of you modem and to get its vendorId and productionid.
ii) lsusb -v From above command search the vendor id and product id your of modem and execute the below command
iii) modprobe usbserial vendor=XXXXXX product=XXXXXX This command will load your modem
Now run the command given in step 4.
5) Now open /etc/wvdial.conf file in your favourite editor. I used vim for this purpose.
vim /etc/wvdial.conf
Change your username and password with internet/internet. Save and exit.
6) Now try below command..
wvdial
7) Open /etc/resolv.conf or execute below command
You can also add some global DNS echo "nameserver 4.2.2.2" >> /etc/resolv.conf
8) try to ping any site
If you get the response then you are all set for the modem, ENJOY SURFING with high Speed
GUI Mode:
Right Click on the Netowk icon on your status bar
NetowkManager > Mobile Brodband > Add
Simply follow the instructions given in GUI and setup your modem
Then Left Click on NetworkManager ICON on status bar and choose your connection and connect,
If you face any problem then set SELinux ini permissive mode and then try.
I tested the GUI method for huawei modem but, for ZTE modem, it doesn't work, Please let me know if it works for you..
View 1 Replies
ADVERTISEMENT
Sep 17, 2009
I am using Ubuntu 9.04, I want to connect my Reliance ZTE cdma modem in ubuntu,could anyone give the steps in detail. i have run the following commands in the terminal and pasted the result for each command
sudo lshw -C network
lspci -nn
lsusb
[code]...
View 6 Replies
View Related
Jul 23, 2011
I have a USB Tata Docomo (USB Modem to connect internet) lsusb shows
Code:
Did a lot of Googling etc on forums and seems a few people have been able to use it.
1) [url]
2) [url]
Though I followed steps as per above links but I my connection via network manager does not establishes. Which as per above links should have come if things went correctly. In Windows same modem works correctly.
I also installed usb-modswitch but not sure as how to use it. I installed it via Synaptic (I use Ubuntu)
Quote:
Shows
Quote:
Quote:
My kernel is
Quote:
Quote:
Like this it keeps on repeating above steps. My service provider does not give a user name and password.
Here is my wvdial.conf file
Quote:
Next set of commands
Quote:
Quote:
Quote:
Quote:
Quote:
I also tried as per this post [url]
Quote:
How do I connect to internet?
Is the driver for my device missing on my system?
View 3 Replies
View Related
Jan 12, 2011
is there anyway that i can install my reliance netconnect lxu800 modem graphically(GUI). i am not well versed with command line interface. i just downloaded ubuntu desktop version and installed it alongside windows vista.
View 2 Replies
View Related
Jun 15, 2011
I've Reliance Broadband internet modem . very first time only it was connected but next onwards it's not connecting , I am trying last one month to connect internet , I am tired .I had seen lot of thread related to this problem but it's not connecting, my device is identified by network manager and i entered user name and password ,connecting process is going on but finally it's not connecting . i installed wv dial and usb modeswith data
View 3 Replies
View Related
Jan 20, 2010
Since few days I am trying to install my Reliance Netconnect Boradband ZTE AC8710 in ubuntu 8.04.i did similar things.in lsusb it showing usb device
root@rspatani-desktop:/dev# lsusb
Bus 004 Device 002: ID 03f0:4917 Hewlett-Packard
Bus 004 Device 001: ID 0000:0000
[code]...
View 1 Replies
View Related
Dec 6, 2010
I am using Fedora 13 and I am facing some problems while connecting. Can anyone give me complete description how to connect Tata Photon+ on Fedora 13?
View 1 Replies
View Related
May 10, 2011
I have fedora 14 and reliance netconnect Huawei EC325 modem. I am not enable to configure it. How to configure the modem by providing step-by-step instruction
View 1 Replies
View Related
Jul 22, 2011
I have a USB Modem MMX 372 G to connect internet lsusb showsCode: Bus 002 Device 002: ID 05c6:9000 Qualcomm, Inc.and following is /var/log/messages when I connect the USB modem and connect it for the first time the USB modem Quote:
Jul 24 08:37:42 bond kernel: [ 110.200159] usb 2-2: new high speed USB device using ehci_hcd and address 2
Jul 24 08:37:43 bond kernel: [ 110.353219] usb 2-2: configuration #1 chosen from 1 choice
[code]....
View 1 Replies
View Related
Mar 6, 2010
Configuring(if possible) usb modem in redhat linux. Redhat not able to detect usb modem.
View 2 Replies
View Related
Jul 7, 2011
I have ubuntu 11.04 in my netbook and when I inserted reliance netconnect broadband usb modem,it automatically detected and after giving the necessary details it was connected..But I am not able to access any websites..On googling I found that I have to make changes to /etc/resolv.conf..But resolv.conf file is missing.
View 9 Replies
View Related
Apr 28, 2011
Any one tried to connecting the internet using Tataphoton+?
Device details:
HUAWEI Mobile Broadband
Model: HUAWEI EC 152
According to manual, the device should be detected as /dev/ttyACM0. But no device of this name is created. 'lsusb' identifies the device.
The required packages like wvdial, wvstream are installed. I have tried all the possible ways. Also created /dev/ttyACM0 with # mknod /dev/ttyACM0 c 166 0
Link to manual, in case any one wants to read it [url]
Just want to connect using GNU/linux any how. Can't live with WINDOWS
View 12 Replies
View Related
Nov 20, 2010
I need to setup my Sony Ericson C510 phone modem in Ubuntu linux the latest one that I have installed. When I connect my Phone using USB connection it doesnt show me the Dialog box where it says create new "Mobile Broadband Connection". I am not sure how can I configure my Tata Docomo GPRS Connection to use it with Ubuntu.
Here's one blog i came across which says:- Its wonderful to see people browsing in their mobile phones at work places and while they travel. Many Telecom companies provide cheap GPRS / EDGE based internet connectivity which can also be connected to a computer. Here, I will explain how to connect TATA Docomo Internet service in your Ubuntu machine.
[Code]...
View 3 Replies
View Related
Jun 29, 2011
I use ubuntu on my laptop..and i use reliance net connect data card for accessing the internet..
is there any way by which i can share the reliance netconnect internet connection to another pc to which i am connected through lan?
that pc uses microsoft windows xp..
so that whenever i use my reliance netconnect..that pc connects to me through lan..and is able to use the internet connection as well..
View 8 Replies
View Related
Jan 15, 2010
i have satanic ubuntu 8. i was trying to connect to my reliance netconnect broadband+ via the following method. the process failed. its a usb broadband dongle thing.
Code:
theunknowndoor@theunknowndoor:~$ SU
bash: SU: command not found
theunknowndoor@theunknowndoor:~$ su
Password:
su: Authentication failure
[Code]...
View 1 Replies
View Related
Jul 10, 2011
i am beginner to this field of ubuntu(linux)...last week i have installed ubuntu 11.04...alongside windows xp...but i couldnt configure my net connection...i am using reliance LG LXU800 modem(cdma)intially it was working after using this commansudo modprobe usbserial version=0xeab product=0x9357that time my linux version is 2.6.38.7but now it gives fatal error and it isFATAL: Error inserting usbserial (/lib/modules/2.6.38-8-generic/kernel/drivers/usb/serial/usbserial.ko): Unknown symbol in module, or unknown parameter (see dmesg)
View 5 Replies
View Related
Mar 3, 2010
I tried connecting my reliance netconnect usb modem using mobile broadband in network connection but its unsuccessfull inspite of proper configuration.
View 9 Replies
View Related
Dec 29, 2010
connecting TATA Photon Plus in OpenSUSE. I have been struggling with it but not getting any solution.
View 9 Replies
View Related
Nov 4, 2010
the steps to connect tata photon in ubuntu.
View 1 Replies
View Related
Mar 3, 2010
I tried connecting my reliance netconnect usb modem using mobile broadband in network connection but its unsuccessfull inspite of proper configuration..
View 4 Replies
View Related
Oct 11, 2010
I have installed ubuntu 32 bit version on my HCL netbook. I use reliance netconnect (Huwai EC 1260 or 168c). I have configured it and it works well. But the only problem is that I have to connect the netconnect device before booting. If I connect it when its ON, the networkmanager does not connect automatically. even on the right on the tray icon, enable mobile broadband option is not there.
View 2 Replies
View Related
Oct 7, 2010
I am using redhat linux os rhel 5.3. i am not able to connect to internet via my new tata indicom datacard in this operating system...how can i configure it to work...i am using vmware to run this operating system...
View 2 Replies
View Related
Apr 15, 2010
I want to know how to connect tata photon+ mobile broadband service in redhat el5,like drivers needed,procedures to install,where can i download the driver.
View 3 Replies
View Related
Jan 22, 2010
I'm using ubuntu karmic and I'm not able to connect to the internet with my reliance netconnect data card using network manager. Other distros like fedora, opensuse n sabayon connected easily with nm. Ubuntu detects the data card flawlessly but just doesnt connect.This problem has been persistent even in previous ubuntu versions, n I used to use wvdial. But downloading wvdial on some other comp with every dependency is really cumbersome.
View 6 Replies
View Related
Feb 1, 2011
Iam using suse linux desktop 10.0. when i connect tata photon USB modem for internet, the system recognises the USB device but unable to connect to internet. How to use tata photon in suse linux
View 3 Replies
View Related
Feb 8, 2010
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
View 4 Replies
View Related
Dec 29, 2010
I've tried setting usb_modeswitch wvdial etc .. modem has been detected as a modem fff1 but still could not connect to the internet ... I try to use the network connection settings still can not ..so what should I do?
View 2 Replies
View Related
Mar 18, 2011
how to connect 3g modem with ubuntu 10.04
View 1 Replies
View Related
Aug 31, 2010
Can I connect my Linux PC to the Internet with a Nokia E71? I've looked for answers elsewhere but everything I've found refers to file synchronization, sending SMSs, playing with the address book, etc. I just want the Internet!
View 1 Replies
View Related
Mar 29, 2011
i try to connect vodafone usb modem on it but m unable to connect
View 1 Replies
View Related