English :I'm a newbie please help me??? How to connect Modem GSM(3g-hsdpa) / CDMA in Ubuntu??
Indonesia : Aku newbie, tolong bantu saya??? Bagaimana mengkoneksikan GSM Modem (3g-HSDPA) / CDMA di Ubuntu?
Modem : Option Icon322 / GlobeTrotter Icon322
I think I have configured GLink usb modem so far. But when I run wvdial command, I got the following. But I can not browse the internet. Other problem is when I try to use Gnome PPP dialer, it could not connect. Modem type is listed as ttyS0 and so on while I have setting in wvdial.conf ttyUSB0 so it does not support.
chitra@chitra:~$ sudo wvdial
[sudo] password for chitra:
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATE0
--> Sending: ATQ0
OK
--> Re-Sending: ATE0
OK
--> Cannot get information for serial port .....
--> Initializing modem.
I am using Ubuntu 9.04, I want to connect my Reliance ZTE cdma modem in ubuntu,could anyone give the steps in detail. i have run the following commands in the terminal and pasted the result for each command
sudo lshw -C network
lspci -nn
lsusb
[code]...
i can't connect the internet using Skytech CDMA USB modem in my ubunntu 10.10 (Super OS) i follow the instruction in this thread url.
1. Boot w/ out device,
2. connect the device,
3. open the terminal and type..
GC224PA-UUF:~$ usb-devices
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
code....
I have a ZTE CDMA 1x Modem (Reliance Netconnect). The modem has a USB interface and it works as a PLUG-&-PLAY device on windows (and has a Flash Storage too for driver information for windows.) I am unable to find my modem on Linux machine so that i can use wvdial for getting connected to internet on my linux machine. This the dmesg output for my modem.
[Code].....
I tried connecting my reliance netconnect usb modem using mobile broadband in network connection but its unsuccessfull inspite of proper configuration..
View 4 Replies View Relatedjust finished installing Ubuntu to my dell mini 10v netbook. I really like it so far but I have hit a problem that may be a potential deal breaker. I have a CDMA HTC Hero phone that I have rooted. I installed the "wireless tether for root users" app on my phone and use it ALL the time to go online on my netbook through my phone on windows. However Ubuntu 9.10 does not seem to connect to my phone running this app. It sees the SSID, and i tell it to connect, and then I just get that circle thing for a couple of minutes then it gives up and connects to my main router if its in range.
View 3 Replies View Relatedcdma usb modem recognized on as mass storage device.nstalled wvdialler and made appropriate lines to conf file and still does not work.
View 5 Replies View Relatedi'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
Got this modem and now i'm struggling to get it working.Device: Pantech UM 175 (CDMA Wireless Broadband Modem) Driver: cdc_acm *Modem requires custom startup key
Code:
AT+CRM=1
Error: I get online for maximum 10 seconds, then i get disconnected and can't restart connection until i either replug the modem or disable mobile broadband conncetions via NetworkManager
What I've tried: google reconfigure modem use windows manual All the guides found on google are outdated SuSE version: 11.3 uname -a
Code:
Linux Gendalph.mhome 2.6.34.7-0.4-deskto #1 SMP PREEMPT 2010-10-07 19:07:51 +02 00 i686 i 686 i386 GNU/Linux
lsusb
Code:
Bus 002 Device 002: ID 106c:3714 Curitel Communications, Inc.
Logs:
dmesg
Code:
[ 314.420141] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 314.567174] usb 2-1: New USB device found, idVendor=106c, idProduct=3714
[ 314.567192] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 314.567204] usb 2-1: Product: PANTECH USB MODEM
[code]....
I am able to set up this modem on Ubuntu and Fedora but cannot get it to work on Slackware. I have tried many configurations, all with no success.
View 5 Replies View RelatedI'm using a 'ice.net' D-50 (CDMA EV-DO rev A) mobile broadband USB modem, also sold as Cmotech CNU-680 in other areas. The modem is connected to a USB port on a hp8710w mobile workstation.
As the 11.2 Gnome Network Manager won't connect this modem to Internet (see my first post here), I have downloaded and installed a 'D50 Modem Manager program' from [url]
After unpacking and installing this cmotech-qtmodem-1.6-1.i586.rpm package for suse on 11.2 x86_64, the gui application 'D-50 Modem Manager' is found in the Internet Group.
However, neither this program does connect the D-50 modem really on 11.2 x86_64 (as it did on 11.1 x86_64). Tried both traditional network setup and with Network Manager.
Any idea and suggestion how to trobleshoot this further? I think I've seen that a newer version cmotech-qtmodem 1.9 has been mentioned on the web, but without being able to find and download this version.
Command output as follows:
As normal user:
On the Modem Manager gui: D-50 modem is ready
From Login script Debug window:
As root:
It seemed like the modem connected, but Firefox was not able to connect afterwards (Server not found)
I am unable to install a ZTE AC8710 CDMA Hi Speed Modem on Fedora 10.I have somehow found the Linux Drivers but am unable to compile them as I do not have the required Kernel Headers which I can't download in Linux because my Internet is not working.I have tried the entire process of trying to add the Device ID and setting up xvdial but I am unable to find the ttyUSB or USBtty or USBacm in /dev.
View 7 Replies View RelatedI tried connecting my reliance netconnect usb modem using mobile broadband in network connection but its unsuccessfull inspite of proper configuration.
View 9 Replies View RelatedI use Ubuntu i can not work internet connection Please help me search for a solution but did not find
Use the USB modem model x060s.
I've just spent 2 days of extensive lurking how to solve this problem. Namely, i have ZTE usb modem, model MF626 T. The sofware provided with it works only under windows. What i tried first was to download hso.ko module (copied to the /lib/modules/`uname r`/kernel/drivers/usb/serial/). Then i downloaded hsolinkcontrol and HSOconnect. Unfortunately, i didn't get those /dev/ttyHS* ports that should appear. Only /dev/ttyUSB*. I blacklisted option module. Then changed occurences of ttyHS* to ttyUSB* in .py sources for HSOconnect. what i get is the popup interface GUI that has "connect" button disabled. Then i tried to set up connection via gnome-ppp. The usb modem was automatically detected as /dev/ttyUSB1. But when i supply telephone number that i got with the stick, i get message after "Sending: ATM1L3DT*99*" ->"no carrier found". Then i tried to copy the other two modules i found on the net-airprime.ko and usbserial.ko. I've renamed the option.ko and old usbserial.ko in order to use them later if needed. And also i've put in /etc/udev/rules.d/
some scripts i've found on net, used to mount and unmount ZTE modem. None of all that worked, and somehow i have the feeling i've messed up everything. What i just posted above is the sum of everything i googled out. I would be very glad if someone would help me out with this. I usually like to spend some time lurking and googling, but this is simply taking too much time...
I just got connected to Charter Cable Internet service a few days ago and I'm having a weird problem with my home network. Prior to this my network worked fine. On my network I have a desktop running Ubuntu 9.10/64 and Virtualbox with WinXP installed, an HTPC with Ubuntu 9.10/32 installed and a laptop dual booted with Ubuntu 9.10/32 and WinXP. The desktop and HTPC are hard wired to a wireless router and the laptop is wireless. The cable modem is hard wired to the router. I have samba installed and UFW is disabled. The problem is: with the cable modem turned off or on standby, all machines connect to each other and can transfer files, etc just fine but when I activate the cable modem all of the machines can connect to the Internet but the machines running Ubuntu can't connect to each other on the home network. If I boot the laptop into Windows, it can connect to the Linux machines just fine but if I boot it into Linux, it won't connect to the Linux machines but it can connect to the Internet and as far as the desktop, Ubuntu won't connect to the network but Windows running in the Virtualbox with bridged networking can connect to all of the machines.
View 2 Replies View RelatedMy wireless modem has disappeared from the connection list at the top of the page. Strangely, a guest connection on that same modem is still visible but won't connect. I added the modem back in as a new connection and it was added to the list but it was greyed out and I still can't connect to it. The problem could, of course, be in the modem but I have no way to check that. Reset is not working. Lan connection to the modem works fine. This is the second time this has happened in the last week and I ended up reinstalling Ubuntu. This gave me back the wireless connection. I don't really want to have to do that again. Is there anything I can check in Ubuntu?
View 1 Replies View Relatedhow to connect my modem to the Internet, the help file on my Ubuntu 9.10 does not match the features available. I am using a modem from Starcomms (a local CDMA services provider in Nigeria) made by Epi Valley.
View 4 Replies View Relatedi wanna to connect to internet with USB DSL modem .
View 1 Replies View RelatedI have been working for the last week trying to connect my serial hardware external modem (courier 56K v.everything) within an Ubuntu 10.4 environment. I live in the boonies where I am presently forced to use dial up, so this has got to work, else I cannot update Ubuntu or download software. After trying various suggestions, which my very limited Linux skills fail me, I opted for the suggestion that I download gnome-ppp, install and then use it. Seeing how I cannot download it through Synaptic Package Manager (which I was advised to but can't as it is my Linux computer that I am trying to connect).
I downloaded the zipped file (gnome-ppp_0.3.23_Oubuntu2.tar.gz ) to a USB stick, copied it to the home directory and then extracted it, wherein a new directory was created with many files in it. From here I have been unable to install it through the command line (not sure how), nor have I been able, as was suggested, to install it via the Synaptic Package Manager (can't get it to see the file, not sure how to). I need explicit (Newbie) instructions on how either to connect the modem without gnome-ppp, or instructions on how to get gnome-ppp installed.
I am new in Ubuntu Linux. I am using Acer Aspire 4740. And I have purchased HSDPA Mobidata as internet modem. But I cannot connect it. How can I connect it and use internet using this modem?
View 2 Replies View Relatedi have a samsung laptop.i recently installed ubuntu 11.04 on it.
I have a huawei WA1003A modem .In windows i connect to my modem wirelessly using (WLAN) facility after connecting it shows it has limited connectivity with the modem and then i connect to BSNL using username and password..then i get connected to internet..
In ubuntu I conncted to internet using the cable by making a new dsl connection i provided my user name and password. and then i switched on the modem connected the cable and connected to dsl connection and internet was connected.. . i want to connect it wirelessly.
How to connect huawel ETS2252+ Cdma phone to Fedora 12
View 1 Replies View Relatedhow to connect a Aopen fm56-sw modem
View 3 Replies View RelatedMy router malfunctioned after a weird lightning strikes scenario so i tried connecting directly to the modem, i cant connect on my ubuntu desktop so itried connecting using my laptop with windows 7 and gets connected
View 1 Replies View RelatedI currently using Ubuntu 10.04 LTS
View 2 Replies View Relatedi have E220 usb modem which i managed to crack and make it work on the Airtel network here in india.The problem is i cant seem to make it work in ubuntu, the way it connects is as below :
i boot in windows and connect to internet Then reboot in ubuntu and then it works fine.and i have to do this everytime. appears like the device gets initiated by booting in windows.
I am using Linux Mint 9 Gnome: Isadora (since the same Network Manager applet is used in Ubuntu, I am asking the question here too)I was trying to configure my wireless card to connect my PPPoE connection by using the command pppoeconf wlan0 and also pppoeconf.I was not able to dial my PPPoE connection when connected via Wi-Fi. When I restarted my system, in the Network Manager, under Wireless Networks it says "Device not managed". Now I am not able to use my Wi-Fi card at all and cant connect to my Wi-Fi modem.
There is no hardware Wi-Fi switch, only the key combination Fn+F2 to enable or disable the wireless card.I have used the key combination Fn+F2 (which enables or disables the Wi-Fi card) many a times, but the same thing is displayed in the network manager.If I use LiveCD mode and use any distro even Isadora, the Wi-Fi works fine.My ethernet connection is working fine. I can connect to the internet if I connect my modem using Ethernet port.
I am trying to connect my q75 micromax mobile with my computer as modem using wvdial. But I could not connect as modem. I insalled wvdial, gnome-ppp and mode switch through synaptic package manager.
This is the message I got from terminal window. After this, there is no connection. I closed the terminal window using ctrl+C command. My mobile is dual sim phone. I want to connect through one ISP provider for GPRS. How to set this in wvdial configuration file.
Quote:
subramanian@subramanian:~$ sudo wvdialconf
[sudo] password for subramanian:
Editing `/etc/wvdial.conf'.
[Code].....