I've tried setting usb_modeswitch wvdial etc .. modem has been detected as a modem fff1 but still could not connect to the internet ... I try to use the network connection settings still can not ..so what should I do?
View 2 Repliesi'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
how to connect 3g modem with ubuntu 10.04
View 1 Replies View Relatedhow can i connect to the internet using modem card?
Intel d915,3GHz pinless,Lucent Modem
I am using samsung mobile (sgh-b220) in order to connect to the internet. I can easily connect on windows system , using PC studio software. I tried KPPP, wvidial none solved the problem. (It successfully dials the number. Put pppd connection will be terminated)
Some how I managed to scan modem communication taking place on the windows system, and tried exact commands on linux system still I am not able connect.
I have attached log files from windows machine. wvidial.conf, wvidial out put file along with this post.
I'm running F12 on a Toshiba Satellite laptop. I don't have any problems connecting to eth0 or wlan0 when I'm at work or when connecting to a variety of cable modems, but for some reason I can't connect to AT&T/Bellsouth's dsl modem at my house (can't connect directly, much less through my DI-524 D-Link wifi).Does anyone have any idea why? I've been through every setting I can think of and I've stayed on the phone with techsupport for AT&T and physically watched as they've pinged and reset my modem, so signal into the house/modem is good....and I can hit the modem's IP and go through all of the configuration settings and everything from Bellsouth says that I'm connected and online, but when I attempt to go to another website like google or yahoo or fedora.com, I get a message telling me "Server at ******** not found."After spending 2.5 hours on the phone last night with tech support, I came into the office tonight and hooked right up to TruVista's (cable) network.
View 5 Replies View RelatedCan I connect my Linux PC to the Internet with a Nokia E71? I've looked for answers elsewhere but everything I've found refers to file synchronization, sending SMSs, playing with the address book, etc. I just want the Internet!
View 1 Replies View Relatedi try to connect vodafone usb modem on it but m unable to connect
View 1 Replies View RelatedI'm an Ubuntu lucid user and i have AnyData adu 560d modem. i try to connect to the Internet using my modem, but ubuntu read it as usb, how can i using usb mode-switch to solve this problem,in otherworld i know what is the problem but i need the steps to solve this problem .
View 1 Replies View RelatedI have a huawei e230 modem that used to work pretty good until this week. It has always been much slower on linux than windows but I am not complaining because windows keep disconnecting ever hour or so, while linux can stay connected over night without problem. The modem is still recognized but when I try to connect it suddenly disappears.
View 1 Replies View Relatednewly installed fedora 15 is not able to connect to internet i have broadband connection with wireless modem my laptop is connecting to wireless modem network. but i am not able to configure pppoe connection on it PS: i am able to connect to internet when using wired connection from modem
View 2 Replies View RelatedI have just installed Fedora 13, everything seems to work but the Internet connection. 3 devices are shown in the "Network Configuration" window (devices tab)(under "Network Device Control")"Network Cards" (wired) (wireless) and even the Motorola Modem from the ISP as well as all of the primary and secondary "DNS's", but will not connect! I have Broadcom devices on a Dell Latitude D600 Laptop. On the upper right of the desktop, the connection icon shows when I plug and unplug the cat5e, so it sees something there, but will not connect.
View 10 Replies View RelatedHere is a method for connect usb modem in linux system.
I've created step by step process to configure the TATA/Reliance modem over linux..Pls go thru the link
I used this method to configure TATA photon+ but I hope similar way will also work for Reliance NetConnect Brodband+
Huwaie/ZTE Modem
Command Mode:
1) Check your NetworkManager rpm for Correct Installation
2) Set SELinux in permissive mode and switch to ROOT user or you can also use sudo..
3) If wvdial is not installed already, you've to install it from Fedora Repository. yum install wvdial
4) Run below command, it will detect your modem....wvdialconf /etc/wvdial.conf
If this command can't detect your modem then try below commands
i) lsusb -v grep -i iManufacturer The above command will help you to know the manufacturer of you modem and to get its vendorId and productionid.
ii) lsusb -v From above command search the vendor id and product id your of modem and execute the below command
iii) modprobe usbserial vendor=XXXXXX product=XXXXXX This command will load your modem
Now run the command given in step 4.
5) Now open /etc/wvdial.conf file in your favourite editor. I used vim for this purpose.
vim /etc/wvdial.conf
Change your username and password with internet/internet. Save and exit.
6) Now try below command..
wvdial
7) Open /etc/resolv.conf or execute below command
You can also add some global DNS echo "nameserver 4.2.2.2" >> /etc/resolv.conf
8) try to ping any site
If you get the response then you are all set for the modem, ENJOY SURFING with high Speed
GUI Mode:
Right Click on the Netowk icon on your status bar
NetowkManager > Mobile Brodband > Add
Simply follow the instructions given in GUI and setup your modem
Then Left Click on NetworkManager ICON on status bar and choose your connection and connect,
If you face any problem then set SELinux ini permissive mode and then try.
I tested the GUI method for huawei modem but, for ZTE modem, it doesn't work, Please let me know if it works for you..
I am using Ubuntu 9.04, I want to connect my Reliance ZTE cdma modem in ubuntu,could anyone give the steps in detail. i have run the following commands in the terminal and pasted the result for each command
sudo lshw -C network
lspci -nn
lsusb
[code]...
I have configured my nokia 3230 as a modem on debian
Scanning your serial ports for a modem.
As u can see above my modem was gettin detected. but when i tried dialing it never got connected..
Iam sending the log file:
I am using a tata docomo connection.
My broadband internet connection came with a Nokia-Seimens C2110 Adsl modem. Please help me connect the modem through USB cable as the ethernet card is used to connect my computer(Asus- P5RD2 VM motherboard) to a different computer on LAN. I am in a fix and have no clue how to proceed.
View 1 Replies View RelatedI've FC10 installed. After updating a few days back, I'm unable to use Network Manager to connect to the net through my USB Modem. All the threads I've read say to do
Code: yum update NetworkManager but how can I do it without net connection? Can anyone post the exact link of the Network Manager's latest and BUG-FREE rpm so that I can directly run it?
I'm an Ubuntu lucid user and i have AnyData adu 560d modem.i try to connect to the internet using my modem, but Ubuntu read it as usb tell me how can i using usb mode-switch to solve this problem,in otherworld i know what is the problem but i need the steps to solve this problem .
View 1 Replies View RelatedI use Ubuntu i can not work internet connection Please help me search for a solution but did not find
Use the USB modem model x060s.
I couldn't connect my Micromax 300G modem in Debian Linux. From internet (in Windows Vista), I came across the information of USB_ModeSwitch and then I downloaded it. While going to install it, I came across the problem that TCL-interpreter is not available in Debian Linux. Then again I restarted my laptop in Windows Vista and connected my Micromax modem and from internet downloaded TCL8.5.10-src.tar.gz. But while going to install it, I came across the problem that " configure: error: no acceptable C compiler found in $PATH " . Also as presently, I am unable to connect my modem therefore I am unable to issue the code:" apt-get update ".
View 16 Replies View RelatedSteps for using scan Modem to Identfy dial up modem?
View 1 Replies View Relatedtrying to make my 3G modem (a ZTE MF622) work with OpenSUSE 11.2. KNetworkManager is recognizing it (so I suppose it's not on Storage Mode), I can create the 3G connection and connect, but I can't navigate on any sites (ping gives "unknown host" for any IP). Also, the KNetworkManager applet doesn't show anything on fields "Name servers" and "Domains" (they are blank). Tried some instructions from the internet here and there, but didn't have any luck.
View 9 Replies View RelatedI've just spent 2 days of extensive lurking how to solve this problem. Namely, i have ZTE usb modem, model MF626 T. The sofware provided with it works only under windows. What i tried first was to download hso.ko module (copied to the /lib/modules/`uname r`/kernel/drivers/usb/serial/). Then i downloaded hsolinkcontrol and HSOconnect. Unfortunately, i didn't get those /dev/ttyHS* ports that should appear. Only /dev/ttyUSB*. I blacklisted option module. Then changed occurences of ttyHS* to ttyUSB* in .py sources for HSOconnect. what i get is the popup interface GUI that has "connect" button disabled. Then i tried to set up connection via gnome-ppp. The usb modem was automatically detected as /dev/ttyUSB1. But when i supply telephone number that i got with the stick, i get message after "Sending: ATM1L3DT*99*" ->"no carrier found". Then i tried to copy the other two modules i found on the net-airprime.ko and usbserial.ko. I've renamed the option.ko and old usbserial.ko in order to use them later if needed. And also i've put in /etc/udev/rules.d/
some scripts i've found on net, used to mount and unmount ZTE modem. None of all that worked, and somehow i have the feeling i've messed up everything. What i just posted above is the sum of everything i googled out. I would be very glad if someone would help me out with this. I usually like to spend some time lurking and googling, but this is simply taking too much time...
I have an ADSL Internet connection with static IP.I connected through PPPOE from my modem to my ISP.I need to ssh from outside of my home to my home, But i don't know to use which connection between my computer and my modem.(dhcp ,static , bridge or ....)
View 1 Replies View RelatedMy modem can't connect to internet but my broadband connection works, i dont want to login the broadband connection every time i start thte computer.
View 2 Replies View RelatedWhen I installed Slackware it configured it by the way I was originally connecting to the internet by. Which was corded to the router. I want to just connect directly to the modem but don't know the steps to make it work correctly.
View 10 Replies View RelatedI'm using a Verizon/Nortel USB760 wireless modem (worker just fine in 13.0, got problems in 13.1). Using KPPP, I connect to the service, waltz around reading mail, news and LQ then disconnect and close KPPP. I let it sit for any length of time then open KPPP, connect and it can see the modem, attempts to initialize it and it just sits there - I have to unplug the modem and reconnect it to get it going again. /var/log/messages doesn't give any hints (everything looks normal I think) and nothing else does either -- the indicate light on the modem stays green and all that. I've tried ejecting it (nope) and whatever else I can thing of (which ain't much) including reviewing Changes and Hints, READMEs and all.
Is there some setting I may have missed or a USB rule or do I need to poke the thing somehow to get it going? USB-Modeswitch automagically figures out what the device is and does its settings (so there's no "conf" file any more - unless I really missed something there).
Is it possible to use connect to the Internet using my internal modem which i have in my laptop using debian.. Please do help.Ofcourse i can do this with the windows 7 which is also installed in my lap..
I have a MSI laptop with model no. vr440..[color=#404040][/color]
I am trying to connect to wireless broadband using SuSE 11.2 and a Huawei E160E USB modem, through Internode Australia.
Networkmanager does not seem to recognise the modem so I am trying other means. I believe I have got wvdial to connect (it reports a correct IP address, the light on the stick goes solid blue and I can ping external IP addresses). However it can't find a DNS nameserver and I can't work out how to provide one to wvdial, and therefore can't do anything through the connection (I would rather not revert to ifup because this laptop travels between WLANs). I followed swerdna's comprehensive instructions on setting up a wireless broadband modem in YAST, but I got lost on the very last instruction: KMenu --> KInternet. I can't find this on my application launcher.
My wireless modem has disappeared from the connection list at the top of the page. Strangely, a guest connection on that same modem is still visible but won't connect. I added the modem back in as a new connection and it was added to the list but it was greyed out and I still can't connect to it. The problem could, of course, be in the modem but I have no way to check that. Reset is not working. Lan connection to the modem works fine. This is the second time this has happened in the last week and I ended up reinstalling Ubuntu. This gave me back the wireless connection. I don't really want to have to do that again. Is there anything I can check in Ubuntu?
View 1 Replies View Related