Ubuntu Networking :: How To Connect Reliance Netconnect (ZTE CDMA 1X) With 9.10 Karmic

Mar 3, 2010

I tried connecting my reliance netconnect usb modem using mobile broadband in network connection but its unsuccessfull inspite of proper configuration..

View 4 Replies


ADVERTISEMENT

Ubuntu :: Connect Reliance Netconnect (ZTE CDMA 1X) With 9.10 Karmic?

Mar 3, 2010

I tried connecting my reliance netconnect usb modem using mobile broadband in network connection but its unsuccessfull inspite of proper configuration.

View 9 Replies View Related

Ubuntu Networking :: Enabling Auto-connect For Reliance Netconnect?

Oct 11, 2010

I have installed ubuntu 32 bit version on my HCL netbook. I use reliance netconnect (Huwai EC 1260 or 168c). I have configured it and it works well. But the only problem is that I have to connect the netconnect device before booting. If I connect it when its ON, the networkmanager does not connect automatically. even on the right on the tray icon, enable mobile broadband option is not there.

View 2 Replies View Related

Ubuntu Networking :: Unable To Connect To Internet With Reliance Netconnect Data Card Using Network Manager

Jan 22, 2010

I'm using ubuntu karmic and I'm not able to connect to the internet with my reliance netconnect data card using network manager. Other distros like fedora, opensuse n sabayon connected easily with nm. Ubuntu detects the data card flawlessly but just doesnt connect.This problem has been persistent even in previous ubuntu versions, n I used to use wvdial. But downloading wvdial on some other comp with every dependency is really cumbersome.

View 6 Replies View Related

Ubuntu :: Connect To Reliance Netconnect Broadband?

Jan 15, 2010

i have satanic ubuntu 8. i was trying to connect to my reliance netconnect broadband+ via the following method. the process failed. its a usb broadband dongle thing.

Code:
theunknowndoor@theunknowndoor:~$ SU
bash: SU: command not found
theunknowndoor@theunknowndoor:~$ su
Password:
su: Authentication failure

[Code]...

View 1 Replies View Related

General :: Connect Reliance Netconnect ZTE AC 8710 In Ubuntu 8.04?

Jan 20, 2010

Since few days I am trying to install my Reliance Netconnect Boradband ZTE AC8710 in ubuntu 8.04.i did similar things.in lsusb it showing usb device

root@rspatani-desktop:/dev# lsusb
Bus 004 Device 002: ID 03f0:4917 Hewlett-Packard
Bus 004 Device 001: ID 0000:0000

[code]...

View 1 Replies View Related

Fedora Networking :: Connect Reliance Netconnect On Fedora?

Jan 23, 2010

I am using Reliance Netconnect Broadband+ (HUAWEI EC 1260) on my Fedora 10 and Fedora 12.

View 1 Replies View Related

General :: Connect Reliance ZTE CDMA Modem In Ubuntu?

Sep 17, 2009

I am using Ubuntu 9.04, I want to connect my Reliance ZTE cdma modem in ubuntu,could anyone give the steps in detail. i have run the following commands in the terminal and pasted the result for each command

sudo lshw -C network
lspci -nn
lsusb

[code]...

View 6 Replies View Related

Fedora Hardware :: Unable To Install Reliance Netconnect In 13?

Nov 12, 2010

Ii am not able to install reliance netconnect broadband + on my fedora 13. the os is not detecting the usbmodem .it is treating it as a usb storage device only. there is a cross p[latform package supplied by the vendor. on using this. the package after installing gives an error message that "not able to mount usb". the same is running fine on windows xp where it got auto installed without any hiccups. do reply fast to help me install and access the internet through this usbmodem through fedora 13. the model no of the usb modem is ZTE - AC2736.

View 1 Replies View Related

General :: Reliance Netconnect Broadband + ZTE Installation On Fedora 14?

Nov 15, 2010

i recently installed Fedora 14 on my laptop and when im tryin to connect the reliance dongle its not getting detected even as a usb ... when i tried to install it on fed 13 the rpm package inside the usb stick gets installed but when i click on the shortcut for moden it shows "device not connected"

View 1 Replies View Related

Ubuntu :: Reliance Netconnect Broadband Usb Modem With 11.04 - Unable To Access Any Websites

Jul 7, 2011

I have ubuntu 11.04 in my netbook and when I inserted reliance netconnect broadband usb modem,it automatically detected and after giving the necessary details it was connected..But I am not able to access any websites..On googling I found that I have to make changes to /etc/resolv.conf..But resolv.conf file is missing.

View 9 Replies View Related

General :: Install Reliance Netconnect Lxu800 Modem Graphically (GUI)

Jan 12, 2011

is there anyway that i can install my reliance netconnect lxu800 modem graphically(GUI). i am not well versed with command line interface. i just downloaded ubuntu desktop version and installed it alongside windows vista.

View 2 Replies View Related

Ubuntu Networking :: Cannot Connect Reliance LG LXU Modem800?

Jul 10, 2011

i am beginner to this field of ubuntu(linux)...last week i have installed ubuntu 11.04...alongside windows xp...but i couldnt configure my net connection...i am using reliance LG LXU800 modem(cdma)intially it was working after using this commansudo modprobe usbserial version=0xeab product=0x9357that time my linux version is 2.6.38.7but now it gives fatal error and it isFATAL: Error inserting usbserial (/lib/modules/2.6.38-8-generic/kernel/drivers/usb/serial/usbserial.ko): Unknown symbol in module, or unknown parameter (see dmesg)

View 5 Replies View Related

Ubuntu Networking :: Glink - CDMA USB Modem Could Connect Internet

Jan 13, 2011

I think I have configured GLink usb modem so far. But when I run wvdial command, I got the following. But I can not browse the internet. Other problem is when I try to use Gnome PPP dialer, it could not connect. Modem type is listed as ttyS0 and so on while I have setting in wvdial.conf ttyUSB0 so it does not support.

chitra@chitra:~$ sudo wvdial
[sudo] password for chitra:
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATE0
--> Sending: ATQ0
OK
--> Re-Sending: ATE0
OK
--> Cannot get information for serial port .....
--> Initializing modem.

View 9 Replies View Related

Ubuntu Networking :: Wireless Tether - Does Not Seem To Connect To CDMA HTC Hero Phone

Jan 25, 2010

just finished installing Ubuntu to my dell mini 10v netbook. I really like it so far but I have hit a problem that may be a potential deal breaker. I have a CDMA HTC Hero phone that I have rooted. I installed the "wireless tether for root users" app on my phone and use it ALL the time to go online on my netbook through my phone on windows. However Ubuntu 9.10 does not seem to connect to my phone running this app. It sees the SSID, and i tell it to connect, and then I just get that circle thing for a couple of minutes then it gives up and connects to my main router if its in range.

View 3 Replies View Related

Ubuntu Networking :: How To Connect Modem GSM / CDMA In Ubuntu?

Aug 12, 2010

English :I'm a newbie please help me??? How to connect Modem GSM(3g-hsdpa) / CDMA in Ubuntu??
Indonesia : Aku newbie, tolong bantu saya??? Bagaimana mengkoneksikan GSM Modem (3g-HSDPA) / CDMA di Ubuntu?
Modem : Option Icon322 / GlobeTrotter Icon322

View 3 Replies View Related

Ubuntu :: Share Reliance Net Connect With Another Pc Through Lan?

Jun 29, 2011

I use ubuntu on my laptop..and i use reliance net connect data card for accessing the internet..

is there any way by which i can share the reliance netconnect internet connection to another pc to which i am connected through lan?

that pc uses microsoft windows xp..

so that whenever i use my reliance netconnect..that pc connects to me through lan..and is able to use the internet connection as well..

View 8 Replies View Related

General :: Connect Tata And Reliance Boradband Modem

Mar 23, 2010

Here is a method for connect usb modem in linux system.

I've created step by step process to configure the TATA/Reliance modem over linux..Pls go thru the link

I used this method to configure TATA photon+ but I hope similar way will also work for Reliance NetConnect Brodband+

Huwaie/ZTE Modem
Command Mode:

1) Check your NetworkManager rpm for Correct Installation

2) Set SELinux in permissive mode and switch to ROOT user or you can also use sudo..

3) If wvdial is not installed already, you've to install it from Fedora Repository. yum install wvdial

4) Run below command, it will detect your modem....wvdialconf /etc/wvdial.conf

If this command can't detect your modem then try below commands

i) lsusb -v grep -i iManufacturer The above command will help you to know the manufacturer of you modem and to get its vendorId and productionid.

ii) lsusb -v From above command search the vendor id and product id your of modem and execute the below command

iii) modprobe usbserial vendor=XXXXXX product=XXXXXX This command will load your modem

Now run the command given in step 4.

5) Now open /etc/wvdial.conf file in your favourite editor. I used vim for this purpose.

vim /etc/wvdial.conf

Change your username and password with internet/internet. Save and exit.

6) Now try below command..

wvdial

7) Open /etc/resolv.conf or execute below command

You can also add some global DNS echo "nameserver 4.2.2.2" >> /etc/resolv.conf

8) try to ping any site

If you get the response then you are all set for the modem, ENJOY SURFING with high Speed

GUI Mode:

Right Click on the Netowk icon on your status bar

NetowkManager > Mobile Brodband > Add

Simply follow the instructions given in GUI and setup your modem

Then Left Click on NetworkManager ICON on status bar and choose your connection and connect,

If you face any problem then set SELinux ini permissive mode and then try.

I tested the GUI method for huawei modem but, for ZTE modem, it doesn't work, Please let me know if it works for you..

View 1 Replies View Related

Ubuntu Installation :: Could Not Connect The Internet Using Skytech USB CDMA Modem?

Oct 31, 2010

i can't connect the internet using Skytech CDMA USB modem in my ubunntu 10.10 (Super OS) i follow the instruction in this thread url.

1. Boot w/ out device,
2. connect the device,
3. open the terminal and type..

GC224PA-UUF:~$ usb-devices
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
code....

View 1 Replies View Related

Hardware :: How To Connect Huawel ETS2252 - Cdma Phone To Fedora 12

Feb 18, 2010

How to connect huawel ETS2252+ Cdma phone to Fedora 12

View 1 Replies View Related

Ubuntu Networking :: Can't Connect To Internet - Karmic And Kernel 2.6.27

Sep 6, 2010

I'm using Ubuntu Lucid Lynx on a MSI Wind U100 Netbook, and most of the time (say 9 times over 10), my computer can't connect to Internet, be it with an ethernet cable or wifi. I have heard of similar problems with Ubuntu Karmic and kernel 2.6.27, but mine is 2.6.32, so I didn't try the solutions I've found across the web, fearing to break more than anything else.

What I can say is that before running Lucid, the netbook was running Hardy, and ethernet used to work fine whereas WiFi absolutely not (but I didn't try too hard to make it work).

View 2 Replies View Related

Ubuntu Networking :: Fresh Karmic Instal Cannot Connect To Office Internet

Feb 4, 2010

After trialling ubuntu on my home comp, and getting brilliant results, i've now migrated my work computer too. Now, i can't connect to the internet or office network. I'm on a small office wired network. When i was on XP all the settings were on 'utomatic' - didn't need to input an IP, DNS, subnet etc. Now i Can't even ping the router.I've browsed around various other threads and can't find a working solution. I've tried inputting various settings in ubuntu connection settings, but still cannot get it working. (was hoping it would be automatic, as it was on my home comp).

View 1 Replies View Related

Ubuntu Networking :: Karmic: Make A Bluetooth Device *not* Auto-connect?

Mar 5, 2010

I have a nifty new headset (a JawBone icon�the noise cancellation is incredible) and I've successfully connected it to my Karmic laptop (64 bit, for the off chance it makes a difference). The trouble is, I only occasionally want to connect it to my laptop; I mostly use it with my mobile 'phone.

The two devices fight over my new toy a lot, and invariably the laptop wins, contrary to what I want. It seems a pain to have to rediscover the headset every time I want to use VIOP or whatever, so is there a way to add a device to Karmic's Bluetooth list, but not have it connect whenever it sees it?

View 4 Replies View Related

Ubuntu Networking :: Reliance Broadband Not Connecting In 10.04?

Jul 2, 2010

i earlier used bsnl broadband(indian) in ubuntu and configure it using pppoeconf. right now i shifted to reliance broadband(not usb modem) but now pppoeconf cannot detect the connection It shows something like " Sorry I scanned two interfaces but the access concentrator of ur provider did not respond.plz chck ur ntwrk and modem cables. anoder reason fir the scan failure may be anoder running pppoe process which controls the modem

View 2 Replies View Related

Ubuntu Networking :: Reliance Netconnet Broadband+ ZTE?

Jul 11, 2010

Reliance Netconnet Broadband+ ZTE does not work out-of-the-box with Ubuntu 9.10. I haven't yet upgraded to Ubuntu 10.04 (iso download is at 46% ). Does it work out-of-the-box or is there some packages that need to be installed? (I have a dual-boot laptop Ubuntu/Windows 7)

View 2 Replies View Related

Ubuntu Networking :: Can't Use Pcmcia W-CDMA Adapter (NetIndex D01NX)

Apr 13, 2010

I'm using a Kohjinsha SR6 and trialling the ubuntu 9.10 netbook remix from a USB stick before taking the plunge. I have an Emobile D01NX adapter for internet, but I simply can't get it to work even though e-mobile is in the Japan mobile broadband options in network connections (maybe for some of their USB adapters?).

running lspcmcia -v gives:
Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:02:06.0)
Configuration: state: on ready: unknown
Voltage: 3.3V Vcc: 3.3V Vpp: 3.3V

[Code].....

one thing that's crossed my mind is that I haven't got persistence on my usb drive, would that be likely to affect anything? As I understand it that just means everything I do needs to be re-done when I reboot right?

I looked up this issue on the Japanese Ubuntu forums (here) and what I gather is that there is some sort of technical issue with the translation chip (Elan VMB5000?) but that the Sharp Zaurus (link), which runs on a linux variant, has a driver out for my specific device (here). This may be the answer I'm looking for, but unfortunately my linux ability is largely limited to using the GUI and a few basic text commands so installing or modifying the files is way beyond me.

View 1 Replies View Related

Ubuntu Networking :: Sharing CDMA Connection Through Laptop Wireless

Oct 10, 2010

I am looking for information on how to set up my laptop (running ubuntu 10.04) as a wireless access point for other wireless computers, through a mobile broadband usb device. My reason for wanting to do this: i have a mobile broadband verizon usb device for connecting to the internet when a regular wifi connection is not available. however, my wife does not, and it would be nice if she could use her wifi to connect to my laptop wifi and subsequently share my mobile broadband connection. Independently, I have no problems with wireless connectivity using wifi or mobile broadband, I am simply unable to figure out how to configure the two to work together in such a way as to create a wireless access point via my laptop.

View 3 Replies View Related

Networking :: Unable To Find CDMA 1x Modem

May 24, 2010

I have a ZTE CDMA 1x Modem (Reliance Netconnect). The modem has a USB interface and it works as a PLUG-&-PLAY device on windows (and has a Flash Storage too for driver information for windows.) I am unable to find my modem on Linux machine so that i can use wvdial for getting connected to internet on my linux machine. This the dmesg output for my modem.

[Code].....

View 1 Replies View Related

Ubuntu Networking :: Setup ZTE CDMA 2000 IX EVDO Bsnl Wireless Terminal?

May 11, 2010

I started using linux ubuntu version9.04 2 days ago...And I am facing difficulties in configuring or using my bsnl ZTE CDMA 2000 IX EV-DO wireless data terminal in ubuntu... I can't install gnome-ppp on my system... installing it in offline mode. Also,I tried the following commands:

$ sudo aptitude update
$ sudo aptitude install wvdial gnome-ppp
# lsusb
#modprobe usbserial vendor=0x19d2 product=0xfffe $ sudo nano -w /etc/wvdial.conf

I made the following changes in my wvdial.conf file,

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Stupid Mode = 1

[code]...

I am getting an error message as:

Wvdial configuration 1.60
/dev/modem: command not found
/dev/modem: command not found
/dev/modem: command not found

View 1 Replies View Related

Ubuntu Networking :: Intel Wireless / Sprint CDMA Not Working In Network Manager

Jun 6, 2011

Since an upgrade from 10.10 to 11.04, all wireless devices for me in the plasma network manager applet are not functioning properly on a Dell Latitude E4310. Specific problem: No wireless networks appear in the plasma network manager applet. Manually-configured networks do not connect. A separate CDMA card appears, but cannot establish a connection. The CDMA card does function on 10.10 machines, and formerly worked on this machine. The only wireless 'network' that appears in the plasma network manager widget is 'hidden network'. Manually adding a network and checking "Connect Automatically" does nothing. I attempted a fresh install after the upgrade itself failed the work. There are no networks to click on, and selecting the device itself merely shows the status page.

Further information
iwconfig output:
Code:
wlan0 IEEE 802.11abgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key: off
Power Management: off

rfkill output:
Code:
0: dell-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
1: dell-wwan: Wireless WAN
Soft blocked: no
Hard blocked: no
2: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no

dmesg output:
Code:
dmesg | grep iwl
[24.292605] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[24.292610] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[24.292687] iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[24.292696] iwlagn 0000:02:00.0: setting latency timer to 64 .....

Here's the CDMA-specific dmesg output:
Code:
[17846.948253] usb 2-1.1: new full speed USB device using ehci_hcd and address 7
[17847.060342] sierra 2-1.1:1.0: Sierra USB modem converter detected
[17847.060650] usb 2-1.1: Sierra USB modem converter now attached to ttyUSB1
[17847.060765] usb 2-1.1: Sierra USB modem converter now attached to ttyUSB2
[17847.060838] usb 2-1.1: Sierra USB modem converter now attached to ttyUSB3

Neither the CDMA card nor any wireless networks are working. If I take the exact same machine and boot from a disk with 10.10, both work.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved